Skip to main content

ROBOT GENERICO E INTELIGENTE CON NAVEGACION Y OPERACION AUTONOMA PARA PROFUNDIDADES DE 500 METROS

DPI2008-06548-C03-03

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2008
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Inspección visual subacuática mediante robótica submarina, Underwater Visual Inspection using Robotics

  • Carreras, Marc
  • Ridao, Pere
  • García, Rafael
  • Ribas, David
  • Palomeras, Narcís
[EN] This article presents an industrial application of underwater robotics for visual inspection of the seabed. The system consists of an underwater robot to acquire visual images at a very short distance (1-2 meters) from the surface to be inspected and an underwater localization system installed in a boat or in a mooring buoy. This system estimates the robot absolute position during the inspection in Earth coordinates using a USBL acoustic locator, an inertial navigation system (INS) and a GPS. Moreover, the robot has its own navigation system onboard, based on EKF, which uses a velocity sensor based on Doppler effect and an INS with a fiber optic gyroscope (FOG). The control architecture of the robot allows the inspection to be in teleoperation, semi-autonomous or autonomous mode. The robot can perform the inspection in 2D vertical or horizontal surfaces. Once the images and all navigation data have been acquired, an offline process is executed for data fusion, and the processing of the images ends up with a 2D georeferenced image mosaic from the inspected area. The paper details the developed technologies and describes a campaign in the Mequinenza reservoir to detect zebra mussel populations., [ES] Este artículo presenta una aplicación industrial de robótica submarina que consiste en un sistema para realizar inspecciones visuales del fondo subacuático. El sistema consta de un robot submarino para adquirir imágenes visuales a poca distancia (1-2 metros) de la superficie a inspeccionar y un localizador submarino instalado en una embarcación o boya. Este localizador permite conocer la posición absoluta del robot durante la inspección y se basa en un sistema acústico de tipo USBL (Ultra Short Base Line), una unidad de navegación inercial (INS) y un GPS. Además, el robot tiene su propio sistema de navegación a bordo, basado en EKF, que utiliza un sensor de velocidad basado en efecto Doppler y una INS con un giroscopio de fibra óptica (FOG). La arquitectura de control del robot permite realizar la inspección de forma teleoperada, semi-autónoma o completamente autónoma. El robot puede realizar inspecciones de superficies 2D verticales y horizontales. Una vez adquiridas las imágenes y todos los datos de navegación y percepción, se realiza un proceso fuera de linea de fusión de los datos y procesado de las imágenes que concluye con la generación de un mosaico 2D georeferenciado de la superficie inspeccionada. El artículo detalla las tecnologías desarrolladas y describe una campaña realizada en el embalse de Mequinenza (Aragón) para detectar poblaciones de mejillón cebra., Este trabajo ha sido realizado gracias al apoyo del Ministerio de Educación y Ciencia (proyectos DPI2005-09001, CTM200404205, DPI2008-06548 y CTM2010-1521), al Centro de Innovacion y Desarrollo Empresarial de la Generalitat de Catalunya (Proyecto INSPECSUB) y a la colaboración con la empresa Ecohydros S.L.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Girona 500 AUV: From Survey to Intervention

  • Ribas Romagós, David
  • Palomeras Rovira, Narcís
  • Ridao Rodríguez, Pere
  • Carreras Pérez, Marc
  • Mallios, Angelos
This paper outlines the specifications and basic design approach taken on the development of the Girona 500, an autonomous underwater vehicle whose most remarkable characteristic is its capacity to reconfigure for different tasks. The capabilities of this new vehicle range from different forms of seafloor survey to inspection and intervention tasks, Manuscript received April 1, 2011; revised August 5, 2011; accepted October 7, 2011. Date of publication November 30, 2011; date of current version January 9, 2012. Recommended by Guest Editor W. Kirkwood. This work was supported in part by the TRIDENT EU FP7-Project under Grant ICT-248497, in part by the Marie Curie PERG-GA-2010-276778 (Surf3DSLAM), and in part by the Spanish Government under the projects DPI2008-06548-C03 and CTM2010-15216/MAR
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

COLA2: A control architecture for AUVs

  • Palomeras Rovira, Narcís
  • El-Fakdi Sencianes, Andrés
  • Carreras Pérez, Marc
  • Ridao Rodríguez, Pere
This paper presents a control architecture for an autonomous underwater vehicle (AUV) named the Component Oriented Layer-based Architecture for Autonomy (COLA2). The proposal implements a component-oriented layer-based control architecture structured in three layers: the reactive layer, the execution layer, and the mission layer. Concerning the reactive layer, to improve the vehicle primitives' adaptability to unknown changing environments, reinforcement learning (RL) techniques have been programmed. Starting from a learned-in-simulation policy, the RL-based primitive cableTracking has been trained to follow an underwater cable in a real experiment inside a water tank using the Ictineu AUV. The execution layer implements a discrete event system (DES) based on Petri nets (PNs). PNs have been used to safely model the primitives' execution flow by means of Petri net building block (PNBBs) that have been designed according to some reachability properties showing that it is possible to compose them preserving these qualities. The mission layer describes the mission phases using a high-level mission control language (MCL), which is automatically compiled into a PN. The MCL presents agreeable properties of simplicity and structured programming. MCL can be used to describe offline imperative missions or to describe planning operators, in charge of solving a particular phase of a mission. If planning operators are defined, an onboard planner will be able to sequence them to achieve the proposed goals. The whole architecture has been validated in a cable tracking mission divided in two main phases. First, the cableTracking primitive of the reactive layer has been trained to follow a cable in a water tank with the Ictineu AUV, one of the research platforms available in the Computer Vision and Robotics Group (VICOROB), University of Girona, Girona, Spain. Second, the whole architecture has been proved in a realistic simulation of a whole cable tracking mission, This work was supported by the TRIDENT EU FP7-Project under Grant ICT-248497 and the Spanish Government under Project DPI2008-06548-C03-03
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Grasping for the seabed: developing a new underwater robot arm for shallow-water intervention

  • Fernández, José Javier
  • Prats, Mario
  • Sanz, Pedro José
  • García, Juan Carlos
  • Marín, Raúl Gella
  • Robinson, Mike
  • Ribas Romagós, David
  • Ridao Rodríguez, Pere
A new underwater robot arm was developed through intensive cooperation between different academic institutions and an industrial company. The manipulator, which was initially designed to be teleoperated, was adapted for our autonomy needs. Its dimensions and weight were reduced, and its kinematic model was developed so that autonomous control can be performed with it. We compare several commercially available underwater manipulators and describe the development of the new one, from its initial configuration to its mechanical adaptation, modeling, control, and final assembly on an autonomous underwater vehicle (AUV). The feasibility and reliability of this arm is demonstrated in water tank conditions, where various innovative autonomous object-recovery operations are successfully performed, both in stand-alone operation and integrated in an AUV prototype, This research was partly supported by Spanish Ministry of Research and Innovation DPI2011-27977-C03 (TRITON Project) and DPI2008-06548-C03 (RAUVI Project), by the European Commission's Seventh Framework Programme FP7/2007-2013 under grant agreement 248497 (TRIDENT Project), by Foundation Caixa Castello-Bancaixa PI.1B2011-17, and by Generalitat Valenciana ACOMP/2012/252