Skip to main content

MODELADO COMPUTACIONAL DE LA TERMO-ELASTO-VISCOPLASTICIDAD EN GRANDES DEFORMACIONES

DPI2011-26635

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

What-You-Prescribe-is-What-You-Get orthotropic hyperelasticity

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] We present a model for incompressible finite strain orthotropic hyperelasticity using logarithmic strains. The model does not have a prescribed shape. Instead, the energy function shape and the material data of the model are obtained solving the equilibrium equations of the different experiments. As a result the model almost exactly replicates the given experimental data for all six tests needed to completely define our nonlinear orthotropic material. We derive the constitutive tensor and demonstrate the efficiency of the finite element implementation for complex loading situations., Partial financial support for this research is given by the Dirección General de Investigación of the Ministerio de Economía y Competitividad of Spain under grant DPI2011-26635 of the Plan Nacional de Investigación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the interpretation of the logarithmic strain tensor in an arbitrary system of representation

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] Logarithmic strains are increasingly used in constitutive modelling because of their advantageous properties. In this paper we study the physical interpretation of the components of the logarithmic strain tensor in any arbitrary system of representation, which is crucial in formulating meaningful constitutive models. We use the path-independence property of total logarithmic strains to propose different fictitious paths which can be interpreted as a sum of infinitesimal engineering strain tensors. We show that the angular (engineering) distortion measure is arguably not a good measure of shear and instead we propose area distortions which are an exact interpretation of the shear terms both for engineering and for logarithmic strains. This new interpretation clearly explains the maximum obtained in some constitutive models for the simple shear load case., Partial financial support for this research is given by the Direccion General de Investigacion of the Ministerio de Economia y Competitividad of Spain under Grant DPI2011-26635 of the Plan Nacional de Investigacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the tension-compression switch of the Gasser-Ogden-Holzapfel model: Analysis and a new pre-integrated proposal

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] Many biological soft tissues are structurally composed of a mostly isotropic matrix (elastin) and fibers (collagen). These fibers are not perfectly aligned but dispersed around some referential, preferred directions. In order to account for the dispersion of the fibers, a probability distribution is assumed. The Generalized Structure Tensor (GST) models perform a pre-integration of the distribution in order to achieve improved computational efficiency. The best known model of this kind is the Gasser-Ogden-Holzapfel (GOH) model. However, in these models no singular treatment of fibers is made. Whenever they suffer compression it is usual to consider that fibers should not contribute to the overall stiffness. At this point, a switch criterion is employed. This switch criterion is important because it changes the model predictions and may also result in unphysical stress predictions or strain ranges at which no compatible equilibrium solution is found. We perform an analysis of different tension-compression switch criteria from the literature for the GOH model and show relevant physical and computational drawbacks when using these criteria. In order to overcome these drawbacks, we make a new proposal which yields continuous stress solutions. In our proposal, pre-integrated expressions given in terms of the usual set of invariants take into account an average amount of fibers working either in tension or in compression for a given deformation gradient and fiber family. Two distinct switches naturally emerge from our procedure. Furthermore, we keep the appealing GST pre-integrated approach for any proposed stored energy, including that of the GOH model. (C) 2015 Elsevier Ltd. All rights reserved., Partial financial support for this work has been given by grant DPI2011-26635 from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Anisotropic finite strain viscoelasticity based on the Sidoroff multiplicative decomposition and logarithmic strains

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] In this paper a purely phenomenological formulation and finite element numerical implementation for quasi-incompressible transversely isotropic and orthotropic materials is presented. The stored energy is composed of distinct anisotropic equilibrated and non-equilibrated parts. The nonequilibrated strains are obtained from the multiplicative decomposition of the deformation gradient. The procedure can be considered as an extension of the Reese and Govindjee framework to anisotropic materials and reduces to such formulation for isotropic materials. The stress-point algorithmic implementation is based on an elastic-predictor viscous-corrector algorithm similar to that employed in plasticity. The consistent tangent moduli for the general anisotropic case are also derived. Numerical examples explain the procedure to obtain the material parameters, show the quadratic convergence of the algorithm and usefulness in multiaxial loading. One example also highlights the importance of prescribing a complete set of stress-strain curves in orthotropic materials., Partial financial support for this work has been given by grant DPI2011-26635 from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extension of the Sussman-Bathe spline-based hyperelastic model to incompressible transversely isotropic materials

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] In this paper we extend the Sussman¿Bathe spline-based hyperelastic isotropic model to predict the behavior of transversely isotropic isochoric materials. The model is based on an uncoupled decomposition of the stored energy function and a generalization of the inversion formula used by Sussman and Bathe. The present extension introduces some approximations that, in all studied cases, do not yield relevant deviations from the experimental data. The isotropic model results in a particular case of the present formulation. Several possibilities of user-prescribed experimental data are addressed. The model is used to predict experiments of calendered rubber and of biological tissues., We acknowledge the anonymous reviewer #2 of the manuscript for providing a more elegant and accurate version of the inversion formula, Eq. (40), than the one given in the original submission. Financial support for this work has been given by the Direccion General de Proyectos de Investigacion of the Ministerio de Ciencia e Innovacion and the Ministerio de Economia y Competitividad of Spain under grants DPI2008-05423 and DPI2011-26635
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stress and strain mapping tensors and general work-conjugacy in large strain continuum mechanics

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] In this paper we show that mapping tensors may be constructed to transform any arbitrary strain measure in any other strain measure. We present the mapping tensors for many usual strain measures in the Seth-Hill family and also for general, user-defined ones. These mapping tensors may also be used to transform their work-conjugate stress measures. These transformations are merely geometric transformations obtained from the deformation gradient and, hence, are valid regardless of any constitutive equation employed for the solid. Then, advantage of this fact may be taken in order to simplify the form of constitutive equations and their numerical implementation and thereafter, perform the proper geometric mappings to convert the results-stresses, strains and constitutive tangents- to usually employed measures and to user-selectable ones for input and output We herein provide the necessary transformations. Examples are the transformation of small strains formulations and algorithms to large deformations using logarithmic strains. (C) 2015 Elsevier Inc. All rights reserved., Partial financial support for this work has been given by grant DPI2011-26635 from the Direccion General de Proyectos de Investigation of the Ministerio de Economia y Competitividad of Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

WYPiWYG hyperelasticity for isotropic, compressible materials

  • Crespo, José
  • Montáns, Francisco Javier
  • Latorre, Marcos|||0000-0003-4142-0207
[EN] Nowadays the most common approach to model elastic behavior at large strains is through hyperelasticity. Hyperelastic models usually specify the shape of the stored energy function. This shape is modulated by some material parameters that are computed so the predicted stresses best fit the experimental data. Many stored energy functions have been proposed in the literature for isotropic and anisotropic materials, either compressible or incompressible. What-You-Prescribe-Is-What-You-Get (WYPIWYG) formulations present a different approach which may be considered an extension of the infinitesimal framework. The shape of the stored energy is not given beforehand but computed numerically from experimental data solving the equilibrium equations. The models exactly fit the experimental data without any material parameter. WYPIWYG procedures have comparable efficiency in finite element procedures as classical hyperelasticity. In this work we present a WYPIWYG numerical procedure for compressible isotropic materials and we motivate the formulation through an equivalent infinitesimal model., Partial financial support for this work has been given by Grants DPI2011-26635 and DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. F. J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finished and that of the Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under Grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the need of the compression branch to characterize hyperelastic materials

  • Latorre, Marcos|||0000-0003-4142-0207
  • De Rosa, Erica
  • Montáns, Francisco Javier
[EN] Soft biological tissues are frequently modeled as hyperelastic materials. Hyperelastic behavior is typically ensured by the assumption of a stored energy function with a pre-determined shape. This function depends on some material parameters which are obtained through an optimization algorithm in order to fit experimental data from different tests. For example, when obtaining the material parameters of isotropic, incompressible models, only the extension part of a uniaxial test is frequently taken into consideration. In contrast, spline-based models do not require material parameters to exactly fit the experimental data, but need the compression branch of the curve. This is not a disadvantage because as we explain herein, to properly characterize hyperelastic materials, the compression branch of the uniaxial tests (or valid alternative tests) is also needed, in general. Then, unless we know beforehand the tendency of the compression branch, a material model should not be characterized only with tensile tests. For simplicity, here we address isotropic, incompressible materials which use the Valanis-Landel decomposition. However, the concepts are also applicable to compressible isotropic materials and are specially relevant to compressible and incompressible anisotropic materials, because in biomechanics, materials are frequently characterized only by tensile tests., Partial financial support for this work has been given by grants DPI2011-26635 and DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. Erica De Rosa acknowledges the funding for a stay at the UPM, Progetto di internazionalizzazione dei corsi di studio from COINOR-Universita Degli Studi di Napoli Federico II. F.J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finished and that of Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fully anisotropic finite strain viscoelasticity based on a reverse multiplicative decomposition and logarithmic strains

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] In this paper we present a novel formulation for phenomenological anisotropic finite visco-hyperelasticity. The formulation is based on a multiplicative decomposition of the equilibrated deformation gradient into nonequilibrated elastic and viscous contributions. The proposal in this paper is a decomposition reversed respect to that from Sidoroff allowing for anisotropic viscous contributions. Independent anisotropic stored energies are employed for equilibrated and non-equilibrated parts. The formulation uses logarithmic strain measures in order to be teamed with spline-based hyperelasticity. Some examples compare the results with formulations that use the Sidoroff decomposition and also show the enhanced capabilities of the present model. (C) 2015 Elsevier Ltd. All rights reserved., Partial financial support for this work has been given by grant DPI2011-26635 from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new class of plastic flow evolution equations for anisotropic multiplicative elastoplasticity based on the notion of a corrector elastic strain rate

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] We herein present a new continuum theory for both isotropic and anisotropic elastoplasticity at large strains. The new framework has the following properties: (1) It is valid for non-moderate large strains, (2) it is valid for both elastic and plastic anisotropy, (3) its description in rate form is parallel to that of the infinitesimal formulation, (4) it is compatible with the multiplicative decomposition, (5) results in a similar framework in any stress-strain work-conjugate pair, (6) it is consistent with the principle of maximum plastic dissipation and (7) does not impose any restriction on the plastic spin, which must be given as an independent constitutive equation. Furthermore, when formulated using logarithmic strain measures in the intermediate configuration: (8) it may be easily integrated using a classical backward-Euler rule resulting in an additive update. All these properties are obtained simply by considering a plastic evolution in terms of a corrector rate of the proper elastic strain. This new continuum theory is a natural framework for elastoplasticity of both metals and soft materials and solves the (so-coined by Simo) rate issue., Financial support for this work has been given by grants DPI2011-26635 and DPI2015-69801-R from the Direction General de Proyectos de Investigation of the Ministerio de Economia y Competitividad of Spain. FJM also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which part this work was developed and that of the Ministerio de Education, Cultura y Deporte of Spain for the financial support for the sabbatical stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The relevance of transverse deformation effects in modeling soft biological tissues

  • Latorre, Marcos|||0000-0003-4142-0207
  • Romero, Xavier
  • Montáns, Francisco Javier
[EN] Hyperelastic constitutive models for anisotropic biological materials are frequently based on orthotropic incompressible stored energy functions. The material parameters of these models are then obtained through an optimization procedure as to fit some stress-strain experimental data. For example, in arterial wall mechanics the material data usually employed for the Holzapfel-Gasser-Ogden and the Gasser-Ogden-Holzapfel models are two uniaxial tension curves from circumferential and axial specimens. The transverse strains from these specimens are frequently not taken into consideration. In this paper we analyze the evolution of those strains, showing that an unrealistic behaviour may be predicted. We then show how transverse strains may be prescribed using our What-You-Prescribe-Is-What-You-Get (WYPI-VVYG) model in a very intuitive way, still capturing the longitudinal stress-strain behavior in an exact manner without employing any constitutive parameter. This is possible because, in contrast to what it is usually done, we exactly solve the equilibrium and compatibility equations without imposing the shape of the stored energy function. Furthermore, we show that the small strains formulation is naturally recovered and that the physical insight from the infinitesimal theory is preserved. In fact, for incompressible materials, the present approach can be considered as a natural extension of the infinitesimal continuum elastic framework to large strains. This new physical insight clearly shows that if some subclasses of orthotropic incompressible material models are determined with just two uniaxial curves, then the transverse behavior should be contrasted with additional experimental observations. (C) 2016 Elsevier Ltd. All rights reserved., Partial financial support for this work has been given by grants DPI2011-26635 and DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. F.J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which part of this work was performed and Ministerio de Educacion, Cultura y Deporte of Spain for the financial suport for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Material-symmetries congruency in transversely isotropic and orthotropic hyperelastic materials

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] In this work we present the material-symmetries congruency property for anisotropic hyperelastic materials. A transversely isotropic or orthotropic material model holding this property guarantees the recovery of the isotropic behavior when, for example, the volume of reinforcement in a composite material vanishes. A material presenting material-symmetries congruency must show it not only from an analytical, theoretical point of view, but also from a numerical, practical point of view. The former may be obtained from construction of the stored energy function, whereas the latter must be obtained guaranteeing that the parameter-fitting procedure yields material parameters which combined with the specific model results in an isotropic behavior prediction for isotropic materials. We show that some anisotropic models do not present either analytical or numerical material-symmetries congruency. (C) 2015 Elsevier Masson SAS. All rights reserved., Partial financial support for this work has been given by grant DPI2011-26635 from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain