Skip to main content

MONITORIZACION, INFERENCIA, OPTIMIZACION Y CONTROL MULTI-ESCALA: DE CELULAS A BIORREACTORES. (MULTISCALES)

DPI2011-28112-C04-02

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pseudo-sample based contribution plots: innovative tools for fault diagnosis in kernel-based batch process monitoring

  • Vitale, Raffaele
  • Noord, Onno E. de
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] This article explores the potential of kernel-based methods for fault diagnosis in batch process monitoring by combining Kernel-Principal Component Analysis and three common techniques which permit analyzing batch data by means of bilinear models: variable-wise unfolding, batch-wise unfolding and landmark feature extraction. Gower's idea of pseudo-sample projection is exploited to develop novel tools, the pseudo-sample based contribution plots, for diagnostic purposes. The results show that, when the datasets under study are affected by severe non-linearities, the proposed approach performs better than classical ones., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C04-02 and Shell Global Solutions International B.V. (Amsterdam, The Netherlands) under the project PT13698.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bilinear modeling of batch processes. Part III: Parameter Stability

  • González Martínez, José María
  • Camacho Páez, José
  • Ferrer, Alberto|||0000-0001-7244-5947
A paramount aspect in the development of a model for a monitoring system is the so-called parameter stability. This is inversely related to the uncertainty, i.e., the variance in the parameters estimates. Noise affects the performance of the monitoring system, reducing its fault detection capability. Low parameters uncertainty is desired to ensure a reduced amount of noise in the model. Nonetheless, there is no sound study on the parameter stability in batch multivariate statistical process control (BMSPC). The aim of this paper is to investigate the parameter stability associated to the most used synchronization and principal component analysis-based BMSPC methods. The synchronization methods included in this study are the following: indicator variable, dynamic time warping, relaxed greedy time warping, and time linear expanding/compressing-based. In addition, different arrangements of the three-way batch data into two-way matrices are considered, namely single-model, K-models, and hierarchicalmodel approaches. Results are discussed in connection with previous conclusions in the first two papers of the series., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C04-02. Authors also acknowledge the anonymous reviewers for their comments to improve the article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLS model building with missing data: New algorithms and a comparative study

  • Folch-Fortuny, Abel
  • Arteaga, Francisco
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] New algorithms to deal with missing values in predictive modelling are presented in this article. Specifically, 2 trimmed scores regression adaptations are proposed, one from principal component analysis model building with missing data (MD) and other from partial least squares regression model exploitation with missing values. Using these methods, practitioners can impute MD both in the explanatory/predictor and the dependent/response variables. Partial least squares is used here to build the multivariate calibration models; however, any regression method can be used after MD imputation. Four case studies, with different latent structures, are analysed here to compare the trimmed scores regression¿based methods against state-of-the-art approaches. The MATLAB code for these methods is also provided for its direct implementation at http://mseg.webs.upv.es, under a GNU license., Spanish Ministry of Science and Innovation; FEDER; European Union, Grant/Award Number: DPI2011-28112-C04-02 and DPI2014-55276-C5-1R; Spanish Ministry of Economy and Competitiveness, Grant/Award Number: ECO2013-43353-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metabolic flux understanding of Pichia pastoris grown on heterogenous culture media

  • González Martínez, José María
  • Folch-Fortuny, Abel
  • Llaneras Estrada, Francisco
  • Tortajada Serra, Marta
  • Picó, Jesús|||0000-0003-4144-3521
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Within the emergent field of Systems Biology, mathematical models obtained from physical chemical laws (the so-called first principles-based models) of microbial systems are employed to discern the principles that govern cellular behaviour and achieve a predictive understanding of cellular functions. The reliance on this biochemical knowledge has the drawback that some of the assumptions (specific kinetics of the reaction system, unknown dynamics and values of the model parameters) may not be valid for all the metabolic possible states of the network. In this uncertainty context, the combined use of fundamental knowledge and data measured in the fermentation that describe the behaviour of the microorganism in the manufacturing process is paramount to overcome this problem. In this paper, a grey modelling approach is presented combining data-driven and first principles information at different scales, developed for Pichia pastoris cultures grown on different carbon sources. This approach will allow us to relate patterns of recombinant protein production to intracellular metabolic states and correlate intra and extracellular reactions in order to understand how the internal state of the cells determines the observed behaviour in P. pastoris cultivations., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grants DPI2011-28112-C04-01 and DPI2011-28112-C04-02. The authors are also grateful to Biopolis SL for supporting this research. We also gratefully acknowledge Associate Professor Jose Camacho for providing the Exploratory Data Analysis Toolbox.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

N-way modeling for wavelet filter determination in Multivariate Image Analysis

  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
  • Cocchi, Marina
[EN] When trying to analyze spatial relationships in image analysis, wavelets appear as one of the state-of-the-art tools. However, image analysis is a problem-dependent issue, and different applications might require different wavelets in order to gather the main sources of variation in the acquired images with respect to the specific task to be performed. This paper provides a methodology based on N-way modeling for properly selecting the best wavelet choice to use or at least to provide a range of possible wavelet choices (in terms of families, filters, and decomposition levels), for each image and problem at hand. The methodology has been applied on two different data sets with exploratory and monitoring objectives. Copyright © 2015 John Wiley & Sons, Ltd., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C04-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enabling network inference methods to handle missing data and outliers

  • Folch-Fortuny, Abel
  • Fernández Villaverde, Alejandro
  • Rodríguez Banga, Julio
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Background: The inference of complex networks from data is a challenging problem in biological sciences, as well as in a wide range of disciplines such as chemistry, technology, economics, or sociology. The quantity and quality of the data greatly affect the results. While many methodologies have been developed for this task, they seldom take into account issues such as missing data or outlier detection and correction, which need to be properly addressed before network inference. Results: Here we present an approach to (i) handle missing data and (ii) detect and correct outliers based on multivariate projection to latent structures. The method, called trimmed scores regression (TSR), enables network inference methods to analyse incomplete datasets by imputing the missing values coherently with the latent data structure. Furthermore, it substitutes the faulty values in a dataset by proper estimations. We provide an implementation of this approach, and show how it can be integrated with any network inference method as a preliminary data curation step. This functionality is demonstrated with a state of the art network inference method based on mutual information distance and entropy reduction, MIDER. Conclusion: The methodology presented here enables network inference methods to analyse a large number of incomplete and faulty datasets that could not be reliably analysed so far. Our comparative studies show the superiority of TSR over other missing data approaches used by practitioners. Furthermore, the method allows for outlier detection and correction., Research in this study was partially supported by the European Union through project BioPreDyn (FP7-KBBE 289434), and the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grants MultiScales (DPI2011-28112-C04-02, DPI2011-28112-C04-03), and SynBioFactory (DPI2014-55276-C5-1-R, DPI2014-55276-C5-2-R). AF Villaverde also acknowledges funding from the Xunta de Galicia through an I2C postdoctoral fellowship (I2C ED481B 2014/133-0). We also gratefully acknowledge Associate Professor Francisco Arteaga for his help in the adaptation of TSR to the PCA model building context.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Near infrared hyperspectral imaging for forensic analysis of document forgery

  • Silva, Carolina S.
  • Pimentel, María Fernanda
  • Honorato, Ricardo S.
  • Pasquini, Celio
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Hyperspectral images in the near infrared range (HSI-NIR) were evaluated as a nondestructive method to detect fraud in documents. Three different types of typical forgeries were simulated by (a) obliterating text, (b) adding text and (c) approaching the crossing lines problem. The simulated samples were imaged in the range of 928 2524 nm with spectral and spatial resolutions of 6.3 nm and 10 mm, respectively. After data pre-processing, different chemometric techniques were evaluated for each type of forgery. Principal component analysis (PCA) was performed to elucidate the first two types of adulteration, (a) and (b). Moreover, Multivariate Curve Resolution Alternating Least Squares (MCR-ALS) was used in an attempt to improve the results of the type (a) obliteration and type (b) adding text problems. Finally, MCR-ALS and Partial Least Squares Discriminant Analysis (PLS-DA), employed as a variable selection tool, were used to study the type (c) forgeries, i.e. crossing lines problem. Type (a) forgeries (obliterating text) were successfully identified in 43% of the samples using both the chemometric methods (PCA and MCR-ALS). Type (b) forgeries (adding text) were successfully identified in 82% of the samples using both the methods (PCA and MCR-ALS). Finally, type (c) forgeries (crossing lines) were successfully identified in 85% of the samples. The results demonstrate the potential of HSI-NIR associated with chemometric tools to support document forgery identification, INCTAA (Processes no. : CNPq 573894/2008-6; FAPESP 2008/57808-1), NUQAAPE, FACEPE, CNPq, CAPES, Spanish Ministry of Science and Innovation MICINN (grant DPI2011-28112-C04-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Statistical Process Control based on Multivariate Image Analysis: A new proposal for monitoring and defect detection

  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
The monitoring, fault detection and visualization of defects are a strategic issue for product quality. This paper presents a novel methodology based on the integration of textural Multivariate image analysis (MIA) and multivariate statistical process control (MSPC) for process monitoring. The proposed approach combines MIA and p-control charts, as well as T2 and RSS images for defect location and visualization. Simulated images of steel plates are used to illustrate the monitoring performance of it. Both approaches are also applied on real clover images., The authors want to thank Ole Mathis Kruse and Prof. Cecilia Futsaether, from the Norwegian University of Life Sciences (Dept. of Mathematic Sciences and Technology), for providing the real image data set. This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI 2011-28112-C04-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MCR-ALS on metabolic networks: Obtaining more meaningful pathways

  • Folch-Fortuny, Abel
  • Tortajada Serra, Marta
  • Llaneras Estrada, Francisco
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Picó, Jesús|||0000-0003-4144-3521
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] With the aim of understanding the flux distributions across a metabolic network, i.e. within living cells, Principal Component Analysis (PCA) has been proposed to obtain a set of orthogonal components (pathways) capturing most of the variance in the flux data. The problems with this method are (i) that no additional information can be included in the model, and (ii) that orthogonality imposes a hard constraint, not always reasonably. To overcome these drawbacks, here we propose to use a more flexible approach such as Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) to obtain this set of biological pathways through the network. By using this method, different constraints can be included in the model, and the same source of variability can be present in different pathways, which is reasonable from a biological standpoint. This work follows a methodology developed for Pichia pastoris cultures grown on different carbon sources, lately presented in González-Martínez et al. (2014). In this paper a different grey modelling approach, which aims to incorporate a priori knowledge through constraints on the modelling algorithms, is applied to the same case of study. The results of both models are compared to show their strengths and weaknesses., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grants DPI2011-28112-C04-01 and DPI2011-28112-C04-02. The authors are also grateful to Biopolis SL for supporting this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fusion of genomic, proteomic and phenotypic data: the case of potyviruses

  • Folch-Fortuny, A.
  • BOSQUE-CHACON, GABRIEL
  • Picó, Jesús
  • Ferrer, A.
  • Elena, S.F.
Data fusion has been widely applied to analyse different sources of information, combining all of them in a single multivariate model. This methodology is mandatory when different omic data sets must be integrated to fully understand an organism using a systems biology approach. Here, a data fusion procedure is presented to combine genomic, proteomic and phenotypic data sets gathered for Tobacco etch virus (TEV). The genomic data correspond to random mutations inserted in most viral genes. The proteomic data represent both the effect of these mutations on the encoded proteins and the perturbation induced by the mutated proteins to their neighbours in the protein protein interaction net- work (PPIN). Finally, the phenotypic trait evaluated for each mutant virus is replicative fitness. To analyse these three sources of information a Partial Least Squares (PLS) regression model is fitted in order to extract the latent variables from data that explain (and relate) the significant variables to the fitness of TEV. The final output of this methodology is a set of functional modules of the PPIN relating topology and mutations with fitness. Throughout the re-analysis of these diverse TEV data, we generated valuable information on the mechanism of action of certain mutations and how they translate into organismal fitness. Results show that the effect of some mutations goes beyond the protein they directly affect and spreads on the PPIN to neighbour proteins, thus defining functional modules., This work was supported by the Spanish Ministerio de Economia y Competitividad grants BFU2012-30805 (to SFE), and DPI2011-28112-C04-02, DPI2011-28112-C04-01, DPI2014-55276-C5-1-R (to AF and JP) and by Generalitat Valenciana grant PROMETEOII/2014/021 (to SFE). The first two authors are recipients of fellowships from the Spanish Ministerio de Economia y Competitividad: BES-2012-053772 (to GB) and BES-2012-057812 (to AF-F).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Principal elementary mode analysis (PEMA)

  • Folch Fortuny, Abel
  • Marques, Rodolfo
  • Isidro, Ines A.
  • Oliveira, Rui
  • Ferrer, Alberto|||0000-0001-7244-5947
Principal component analysis (PCA) has been widely applied in fluxomics to compress data into a few latent structures in order to simplify the identification of metabolic patterns. These latent structures lack a direct biological interpretation due to the intrinsic constraints associated with a PCA model. Here we introduce a new method that significantly improves the interpretability of the principal components with a direct link to metabolic pathways. This method, called principal elementary mode analysis (PEMA), establishes a bridge between a PCA-like model, aimed at explaining the maximum variance in flux data, and the set of elementary modes (EMs) of a metabolic network. It provides an easy way to identify metabolic patterns in large fluxomics datasets in terms of the simplest pathways of the organism metabolism. The results using a real metabolic model of Escherichia coli show the ability of PEMA to identify the EMs that generated the different simulated flux distributions. Actual flux data of E. coli and Pichia pastoris cultures confirm the results observed in the simulated study, providing a biologically meaningful model to explain flux data of both organisms in terms of the EM activation. The PEMA toolbox is freely available for non-commercial purposes on http://mseg.webs.upv.es., Research in this study was partially supported by the Spanish Ministry of Economy and Competitiveness and FEDER funds from the European Union through grants DPI2011-28112-C04-02 and DPI2014-55276-C5-1R. We would also acknowledge Fundacao para a Ciencia e Tecnologia for PhD fellowships with references SFRH/BD/67033/2009, SFRH/BD/70768/2010 and PTDC/BBB-BSS/2800/2012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cross-validation in PCA models with the element-wise k-fold (ekf) algorithm: theoretical aspects

  • Camacho Páez, José
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Cross-validation has become one of the principal methods to adjust the meta-parameters in predictive models. Extensions of the cross-validation idea have been proposed to select the number of components in principal components analysis (PCA). The element-wise k-fold (ekf) cross-validation is among the most used algorithms for principal components analysis cross-validation. This is the method programmed in the PLS_Toolbox, and it has been stated to outperform other methods under most circumstances in a numerical experiment. The ekf algorithm is based on missing data imputation, and it can be programmed using any method for this purpose. In this paper, the ekf algorithm with the simplest missing data imputation method, trimmed score imputation, is analyzed. A theoretical study is driven to identify in which situations the application of ekf is adequate and, more importantly, in which situations it is not. The results presented show that the ekf method may be unable to assess the extent to which a model represents a test set and may lead to discard principal components with important information. On a second paper of this series, other imputation methods are studied within the ekf algorithm, Research in this area is partially supported by the Spanish Ministry of Economy and Competitiveness and FEDER funds from the European Union through grant DPI2011-28112-C04-02. Jose Camacho was funded by the Juan de la Cierva program, Ministry of Science and Innovation, Spain. This study was carried out when Jose Camacho was at the Universidad Politecnica de Valencia and Universitat de Girona, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using warping information for batch process monitoring and fault classification

  • Gonzalez-Martinez, J.M.
  • Westerhuis, J.A.
  • Ferrer, Alberto|||0000-0001-7244-5947
This paper discusses how to use the warping information obtained after batch synchronization for process monitoring and fault classification. The warping information can be used for i) building unsupervised control charts or ii) fault classification when a rich faulty batches database is available. Data from realistic simulations of a fermentation process of the Saccharomyces cerevisiae cultivation are used to illustrate the proposal., This research work was supported by the Spanish government (Ministry of Science and Innovation, MICINN) under project DPI2011-28112-C04-02. We gratefully acknowledge Associate Professor Jose Camacho for providing the simulation scheme of the fermentation process of Saccharomyces cerevisiae cultivation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-synchro: a novel approach for batch synchronization in scenarios of multiple asynchronisms

  • González Martínez, José María
  • de Noord, Onno
  • Ferrer, Alberto|||0000-0001-7244-5947
Batch synchronization has been widely misunderstood as being only needed when variable trajectories have uneven length. Batch data are actually considered not synchronized when the key process events do not occur at the same point of process evolution, irrespective of whether the batch duration is the same for all batches or not. Additionally, a single synchronization procedure is usually applied to all batches without taking into account the nature of asynchronism of each batch, and the presence of abnormalities. This strategy may distort the original trajectories and decrease the signal-to-noise ratio, affecting the subsequent multivariate analyses. The approach proposed in this paper, named multisynchro, overcomes these pitfalls in scenarios of multiple asynchronisms. The different types of asynchronisms are effectively detected by using the warping information derived from synchronization. Each set of batch trajectories is synchronized by appropriate synchronization procedures, which are automatically selected based on the nature of asynchronisms present in data. The novel approach also includes a procedure that performs abnormality detection and batch synchronization in an iterative manner. Data from realistic simulations of a fermentation process of the Saccharomyces cerevisiae cultivation are used to illustrate the performance of the proposed approach in a context of multiple asynchronisms., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C04-02. Part of this research work was carried out during an internship of the corresponding author at Shell Global Solutions International B.V. (Amsterdam, The Netherlands). The authors also thank the anonymous referees for their comments, which greatly helped to improve the text.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

VIS/NIR hyperspectral imaging and N-way PLS-DA models for detection of decay lesions in citrus fruits

  • Folch Fortuny, Abel
  • Cubero-García, Sergio
  • Blasco Ivars, José
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] In this work an N-way partial least squares regression discriminant analysis (NPLS-DA) methodology is developed to detect symptoms of disease caused by Penicillium digitatum in citrus fruits (green mould) using visible/near infrared (VIS/NIR) hyperspectral images. To build the discriminant model a set of oranges and mandarins was infected by the fungus and another set was infiltrated just with water for control purposes. A double cross-validation strategy is used to validate the discriminant models. Finally, permutation testing is used to select a few bands offering the best correct classification rates in the validation set. The discriminant models developed here can be potentially implemented in a fruit packinghouse to detect infected citrus fruits at their arrival from the field with affordable multispectral (3 5 channels) cameras installed in the packinglines., This research was partially funded by the Spanish Ministry of Science and Innovation through grants DPI2011-28112-C04-02 and DPI2014-55276-C05-1R, and by INIA through grant RTA2012-00062-C04-01. In all cases with the support of European FEDER funds. Authors thank Lluis Palou from the Centro de Tecnologia Postcosecha at the IVIA for the help and supervision in the innoculation process of the fruits.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MIA and NIR Chemical Imaging for pharmaceutical product characterization

  • Prats-Montalbán, José Manuel
  • Jerez-Rozo, JI
  • Romanach, RJ
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] This paper presents a three step methodology based on the use of chemical oriented models (MCR and CLS) for extracting out the chemical distribution maps (CDMs) from hyperspectral images, afterwards performing multivariate image analysis (MIA) on the CDMs, and !nally extracting 'channel' and textural features from the score images related to quality characteristics These features show complementary properties to those directly obtained from the CDMs, since they take advantage of their internal correlation structure. The approach has been successfully applied to the evaluation of homogeneity and cluster presence of API in a novel formulation developed to improve the dissolution of poorly soluble drugs. © 2012 Elsevier B.V. All rights reserved., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grant DPI2011-28112-C04-02, and also by NSF-Engineering Research Center for Structured Organic Particulate Systems (ERC-SOPS, EEC-0540855) and the program NSF-Major Research Instrumentation grant 0821113.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Prostate Diffusion Weighted-Magnetic Resonance Image analysis using Multivariate Curve Resolution methods

  • Aguado Sarrió, Eric
  • Sanz Requena, Roberto
  • Marti Bonmati, Luis
  • Alberich Bayarri, Ángel
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Multivariate Curve Resolution (MCR) has been applied on prostate Diffusion Weighted-Magnetic Resonance Images (DW-MRI). Different physiological-based modeling approaches of the diffusion process have been submitted to validation by sequentially incorporating prior knowledge on the MCR constraints. Results validate the biexponential diffusion modeling approach and show the capability of the MCR models to find, characterize and locate the behaviors related to the presence of an early prostate tumor., The authors want to thank prof. Anna de Juan for her comments and help in using the software for this study. This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI 2011-28112-004-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Missing Data Imputation Toolbox for MATLAB

  • Folch Fortuny, Abel
  • Arteaga Moreno, Francisco Javier
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Here we introduce a graphical user-friendly interface to deal with missing values called Missing Data Imputation (MDI) Toolbox. This MATLAB toolbox allows imputing missing values, following missing completely at random patterns, exploiting the relationships among variables. In this way, principal component anal- ysis (PCA) models are fitted iteratively to impute the missing data until convergence. Different methods, using PCA internally, are included in the toolbox: trimmed scores regression (TSR), known data regres- sion (KDR), KDR with principal component regression (KDR-PCR), KDR with partial least squares regression (KDR-PLS), projection to the model plane (PMP), iterative algorithm (IA), modified nonlinear iterative partial least squares regression algorithm (NIPALS) and data augmentation (DA). MDI Toolbox presents a general procedure to impute missing data, thus can be used to infer PCA models with missing data, to estimate the covariance structure of incomplete data matrices, or to impute the missing values as a preprocessing step of other methodologies., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grant DPI2011-28112-C04-02 and DPI2014-55276-C5-1 R, and the Spanish Ministry of Economy and Competitiveness through grant ECO2013-43353-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Topology analysis and visualization of Potyvirus protein-protein interaction network

  • Bosque, Gabriel
  • Folch Fortuny, Abel
  • Elena Fito, Santiago Fco
  • Picó, Jesús|||0000-0003-4144-3521
  • Ferrer, Alberto|||0000-0001-7244-5947
Background: One of the central interests of Virology is the identification of host factors that contribute to virus infection. Despite tremendous efforts, the list of factors identified remains limited. With omics techniques, the focus has changed from identifying and thoroughly characterizing individual host factors to the simultaneous analysis of thousands of interactions, framing them on the context of protein-protein interaction networks and of transcriptional regulatory networks. This new perspective is allowing the identification of direct and indirect viral targets. Such information is available for several members of the Potyviridae family, one of the largest and more important families of plant viruses. Results: After collecting information on virus protein-protein interactions from different potyviruses, we have processed it and used it for inferring a protein-protein interaction network. All proteins are connected into a single network component. Some proteins show a high degree and are highly connected while others are much less connected, with the network showing a significant degree of dissortativeness. We have attempted to integrate this virus protein-protein interaction network into the largest protein-protein interaction network of Arabidopsis thaliana, a susceptible laboratory host. To make the interpretation of data and results easier, we have developed a new approach for visualizing and analyzing the dynamic spread on the host network of the local perturbations induced by viral proteins. We found that local perturbations can reach the entire host protein-protein interaction network, although the efficiency of this spread depends on the particular viral proteins. By comparing the spread dynamics among viral proteins, we found that some proteins spread their effects fast and efficiently by attacking hubs in the host network while other proteins exert more local effects. Conclusions: Our findings confirm that potyvirus protein-protein interaction networks are highly connected, with some proteins playing the role of hubs. Several topological parameters depend linearly on the protein degree. Some viral proteins focus their effect in only host hubs while others diversify its effect among several proteins at the first step. Future new data will help to refine our model and to improve our predictions., This work was supported by the Spanish Ministerio de Economia y Competitividad grants BFU2012-30805 (to SFE), DPI2011-28112-C04-02 (to AF) and DPI2011-28112-C04-01 (to JP). The first two authors are recipients of fellowships from the Spanish Ministerio de Economia y Competitividad: BES-2012-053772 (to GB) and BES-2012-057812 (to AF-F).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Building covariance matrices with the desired structure

  • Arteaga Moreno, Francisco Javier
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The problem of building a covariance matrix by fixing their diagonal values (variances) and all or a subset of its eigenvalues has been solved in different ways in the literature. In this paper we propose an iterative heuristic method to build such covariance matrix when a subset of its covariances is also chosen from the user. This provides a more flexible approach than those available in the literature for designing covariance matrices with the desired structure. As in other related approaches, the proposal can be useful for testing the performance of chemometric methods with data sets matching the theoretical conditions for their applicability or checking their robustness when the hypothesized properties fail., This research was supported by the Spanish Ministry of Science and Innovation - MICINN (grant DPI2011-28112-C04-02) and the Spanish Ministry of Science and Technology (grant SEJ2010-17475/ECON).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Latent Structures based-Multivariate Statistical Process Control: a paradigm shift

  • Ferrer, Alberto|||0000-0001-7244-5947
The basic fundamentals of statistical process control (SPC) were proposed by Walter Shewhart for data-starved production environments typical in the 1920s and 1930s. In the 21st century, the traditional scarcity of data has given way to a data-rich environment typical of highly automated and computerized modern processes. These data often exhibit high correlation, rank deficiency, low signal-to-noise ratio, multistage and multiway structures, and missing values. Conventional univariate and multivariate SPC techniques are not suitable in these environments. This article discusses the paradigm shift to which those working in the quality improvement field should pay keen attention. We advocate the use of latent structure based multivariate statistical process control methods as efficient quality improvement tools in these massive data contexts. This is a strategic issue for industrial success in the tremendously competitive global market., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C04-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PCA model building with missing data: New proposals and a comparative study

  • Folch-Fortuny, Abel
  • ARTEAGA MORENO, FRANCISCO JAVIER
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] This paper introduces new methods for building principal component analysis (PCA) models with missing data: projection to the model plane (PMP), known data regression (KDR), KDR with principal component regression (PCR), KDR with partial least squares regression (PLS) and trimmed scores regression (TSR). These methods are adapted from their PCA model exploitation version to deal with the more general problem of PCA model building when the training set has missing values. A comparative study is carried out comparing these new methods with the standard ones, such as the modified nonlinear iterative partial least squares (NIPALS), the it- erative algorithm (IA), the data augmentation method (DA) and the nonlinear programming approach (NLP). The performance is assessed using the mean squared prediction error of the reconstructed matrix and the cosines between the actual principal components and the ones extracted by each method. Four data sets, two simulated and two real ones, with several percentages of missing data, are used to perform the comparison. Guardar / Salir Siguiente >, Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grant DPI2011-28112-C04-02, and the Spanish Ministry of Economy and Competitiveness through grant ECO2013-43353-R. The authors gratefully acknowledge Salvador Garcia-Munoz for providing the Phi toolbox (version 1.7) to perform the nonlinear programming approach (NLP) method.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of the effect of chance correlations on variable selection using Partial Least Squares -Discriminant Analysis

  • Kuligowski, Julia
  • Pérez Guaita, David
  • Escobar, Javier
  • Guardia, Miguel de la
  • Vento, Máximo
  • Quintás, Guillermo
  • Ferrer, Alberto|||0000-0001-7244-5947
Variable subset selection is often mandatory in high throughput metabolomics and proteomics. However, depending on the variable to sample ratio there is a significant susceptibility of variable selection towards chance correlations. The evaluation of the predictive capabilities of PLSDA models estimated by cross-validation after feature selection provides overly optimistic results if the selection is performed on the entire set and no external validation set is available. In this work, a simulation of the statistical null hypothesis is proposed to test whether the discrimination capability of a PLSDA model after variable selection estimated by cross-validation is statistically higher than that attributed to the presence of chance correlations in the original data set. Statistical significance of PLSDA CV-figures of merit obtained after variable selection is expressed by means of p-values calculated by using a permutation test that included the variable selection step. The reliability of the approach is evaluated using two variable selection methods on experimental and simulated data sets with and without induced class differences. The proposed approach can be considered as a useful tool when no external validation set is available and provides a straightforward way to evaluate differences between variable selection methods., JE and JK acknowledge the "Sara Borrell" Grants (CD11/00154 and CD12/00667) from the Instituto Carlos III (Ministry of Economy and Competitiveness). DPG acknowledge the "V Segles" Grant provided by the University of Valencia to carry out this study. MV acknowledges the FISPI11/0313 Grant from the Instituto Carlos III (Ministry of Economy and Competitiveness). AF acknowledges the DPI2011-28112-C04-02 Grant from Spanish Ministry of Science and Innovation (MICINN). GQ acknowledges the financial support from the Spanish Ministry of Economy and Competitivity (SAF2012-39948).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of maximum likelihood PCA missing data imputation

  • Folch Fortuny, Abel
  • Arteaga Moreno, Francisco Javier
  • Ferrer, Alberto|||0000-0001-7244-5947
Maximum likelihood principal component analysis (MLPCA) was originally proposed to incorporate measurement error variance information in principal component analysis (PCA) models. MLPCA can be used to fit PCA models in the presence of missing data, simply by assigning very large variances to the non-measured values. An assessment of maximum likelihood missing data imputation is performed in this paper, analysing the algorithm of MLPCA and adapting several methods for PCA model building with missing data to its maximum likelihood version. In this way, known data regression (KDR), KDR with principal component regression (PCR), KDR with partial least squares regression (PLS) and trimmed scores regression (TSR) methods are implemented within the MLPCA method to work as different imputation steps. Six data sets are analysed using several percentages of missing data, comparing the performance of the original algorithm, and its adapted regression-based methods, with other state-of-the-art methods., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grant DPI2011-28112-C04-02 and DPI2014-55276-C5-1R, and the Spanish Ministry of Economy and Competitiveness through grant ECO2013-43353-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Prostate functional magnetic resonance image analysis using multivariate curve resolution methods

  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
  • Sanz Requena, Roberto
  • Marti Bonmati, Luis
This paper discusses the potential of Multivariate Curve Resolution (MCR) models to extract physiological dynamics behaviors from Dynamic Contrast Enhanced Magnetic Resonance (DCE-MR) Imaging prostate perfusion studies for cancer diagnosis. A relationship with biomarkers ( hidden parameters for assessing the possible existence of a tumor) from pharmacokinetic models is also studied., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C04-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of synchronization on bilinear batch process modeling

  • González Martínez, José María
  • Vitale, Raffaele
  • de Noord, Onno E.
  • Ferrer, Alberto|||0000-0001-7244-5947
There is a widespread assumption that batch synchronization is only required if the batch trajectories have different duration. This paper is devoted to demonstrate that synchronization is a critical and necessary preliminary step to bilinear batch process modeling, no matter whether batch trajectories have equal length or not. Another practical assumption is that all batches need the same synchronization method to be aligned. Two different synchronization approaches are compared in terms of synchronization quality: the Multisynchro approach that takes into account the type of asynchronism and the method based on linearly expanding and/or compressing pieces of variables trajectories (the TLEC method), implemented in commercial software. The consequences of inappropriately synchronizing batch data with multiple asynchronisms in process monitoring are investigated. For this study, the observationwise unfolding-T scores batchwise unfolding (OWU-TBWU) approach, which integrates the TLEC method for batch synchronization, is used for process modeling. Data from realistic simulations of a fermentation process of the Saccharomyces cerevisiae cultivation with five different types of asynchronism are used for illustration., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2011-28112-C0t4-02. Part of this research work was carried out during an internship of the corresponding author at Shell Global Solutions International B.V. (Amsterdam, The Netherlands).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enabling network inference methods to handle missing data and outliers

  • Folch-Fortuny, Abel
  • Villaverde, A. F.
  • Ferrer, Alberto
  • Banga, Julio R.
12 pages, 3 figures, 2 tables, Background: The inference of complex networks from data is a challenging problem in biological sciences, as well as in a wide range of disciplines such as chemistry, technology, economics, or sociology. The quantity and quality of the data greatly affect the results. While many methodologies have been developed for this task, they seldom take into account issues such as missing data or outlier detection and correction, which need to be properly addressed before network inference. Results: Here we present an approach to (i) handle missing data and (ii) detect and correct outliers based on multivariate projection to latent structures. The method, called trimmed scores regression (TSR), enables network inference methods to analyse incomplete datasets by imputing the missing values coherently with the latent data structure. Furthermore, it substitutes the faulty values in a dataset by proper estimations. We provide an implementation of this approach, and show how it can be integrated with any network inference method as a preliminary data curation step. This functionality is demonstrated with a state of the art network inference method based on mutual information distance and entropy reduction, MIDER. Conclusion: The methodology presented here enables network inference methods to analyse a large number of incomplete and faulty datasets that could not be reliably analysed so far. Our comparative studies show the superiority of TSR over other missing data approaches used by practitioners. Furthermore, the method allows for outlier detection and correction, Research in this study was partially supported by the European Union through project BioPreDyn (FP7-KBBE 289434), and the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grants MultiScales (DPI2011-28112-C04-02, DPI2011-28112-C04-03), and SynBioFactory (DPI2014-55276-C5-1-R, DPI2014-55276-C5-2-R). AF Villaverde also acknowledges funding from the Xunta de Galicia through an I2C postdoctoral fellowship (I2C ED481B 2014/133-0)., Peer reviewed