Skip to main content

SOPORTE DE EJECUCION FIABLE DE SISTEMAS DE CONTROL BASADOS EN MISIONES

DPI2011-28507-C02-02

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Performance and Results of the Triple Buffering Built-In in a Raspberry PI to Optimize the Distribution of Information from a Smart Sensor

  • Jiménez García, José Luis
  • Baselga Masiá, David
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
Currently, 3D sensors can be considered an evolution of cameras by providing the image with its depth information. These sensors have a generic function and the programmer has to process the received information in order to be adapted and used in a specific environment. In robots navigation, the 3D information can be useful for basic behaviours such as obstacles avoidance or even more complex behaviours such as maps generation . In this article an image management system provided by the xTion intelligent sensor is presented. The xTion sensor provides a VGA image and a 3D depth, which allows it to be used for several purposes. In order to distribute the data, it is acquired, processed and sent to several clients with a triple buffer system modified to serve the most recent image to the client. The system is programmed in C for Linux and built-in in a Raspberry PI. The article exposes the performance and results from monitoring the frame's delay comparing it with a simple and a double buffer system widely used in this kind of systems., Coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and project “Real time distributed control systems” of the Support Program for Research and Development 2012 UPV (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mejora de las propiedades térmicas y ópticas de una bioresina empleando Nanopigmentos con colorantes naturales

  • Micó-Vicent, B.|||0000-0001-8845-1495
  • Perales Romero, Esther
  • Chorro Calderón, Elisabet
  • Gómez Lozano, Omar
  • Viqueira Pérez, Valentín Estanislao
  • Martinez Verdu, Francisco Miguel
  • Gilabert Pérez, Eduardo José
[ES] En este trabajo se lleva a cabo la optimización del proceso de síntesis de nanopigmentos híbridos naturales a partir de tres colorantes naturales; extracto de clorofila, β-caroteno, y extracto de raíz de remolacha. El objetivo es determinar los aditivos que deben emplearse en el proceso de síntesis, así como el orden en el que deben emplearse. Para este fin, se emplea el diseño estadístico de experimentos L9 de Taguchi. Las respuestas a optimizar son referentes al rendimiento de los nanopigmentos en la aplicación de una resina epoxy biodegradable. En el trabajo se evaluarán la temperatura de degradación térmica de la bioresina y la resistencia a la radiación UV-Vis de las muestras. Cómo podrá observarse los mejores resultados se obtienen al emplear hidrotalcita calcinada o no previamente a 600oC durante 3h., Los autores desean agradecer al Ministerio de Economía y Competitividad por la concesión del proyecto “Nuevos métodos de mejora de la correlación instrumental y visual de materiales especiales e innovadores” (DPI2011-30090-C02-02), que ha permitido la financiación necesaria para la realización de este trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Distributed sensor architecture for intelligent control that supports quality of control and quality of service

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and project "Real time distributed control systems" of the Support Program for Research and Development 2012 UPV (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A reliability-based particle filter for humanoid robot self-localization in Robocup Standard Platform League

  • Munera Sánchez, Eduardo
  • Muñoz Alcobendas, Manuel
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper deals with the problem of humanoid robot localization and proposes a new method for position estimation that has been developed for the RoboCup Standard Platform League environment. Firstly, a complete vision system has been implemented in the Nao robot platform that enables the detection of relevant field markers. The detection of field markers provides some estimation of distances for the current robot position. To reduce errors in these distance measurements, extrinsic and intrinsic camera calibration procedures have been developed and described. To validate the localization algorithm, experiments covering many of the typical situations that arise during RoboCup games have been developed: ranging from degradation in position estimation to total loss of position (due to falls, 'kidnapped robot', or penalization). The self-localization method developed is based on the classical particle filter algorithm. The main contribution of this work is a new particle selection strategy. Our approach reduces the CPU computing time required for each iteration and so eases the limited resource availability problem that is common in robot platforms such as Nao. The experimental results show the quality of the new algorithm in terms of localization and CPU time consumption., This work has been supported by the Spanish Science and Innovation Ministry (MICINN) under the CICYT project COBAMI: DPI2011-28507-C02-01/02. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Optimizations on semantic environment management: an application for humanoid robot home assistance

  • Munera Sánchez, Eduardo
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This article introduces some optimization mechanisms focused on environment management, object recognition, and environment interaction. Although the generality of the presented system, this work will be focused on its application on home assistance humanoid robots. For this purpose, a generic environment formalization procedure for semantic scenery description is introduced. As the main contribution of this work, some techniques for a more efficient use of the environment knowledge are proposed. That way, the application of an areabased discrimination mechanism will avoid to process large amounts of data, useless in the current context, improving the object recognition, and characterizing the available interactions in the current area. Finally, the formalized description, and the optimization procedure, will be tested and verified on a specific home scenario using a humanoid robot, This work has been supported by the Spanish Science and Innovation Ministry MICINN under the CICYT project COBAMI: DPI2011-28507-C02-01/02. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A Hierarchical Hybrid Architecture for Mission-Oriented Robot Control

  • Muñoz Alcobendas, Manuel
  • Munera Sánchez, Eduardo
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
In this work is presented a general architecture for a multi physical agent network system based on the coordination and the behaviour management. The system is organised in a hierarchical structure where are distinguished the individual agent actions and the collective ones linked to the whole agent network. Individual actions are also organised in a hybrid layered system that take advantages from reactive and deliberative control. Sensing system is involved as well in the behaviour architecture improving the information acquisition performance., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-C02-02, under coordinated project High Integrity Partitioned Embedded Systems (Hi-PartES): TIN2011-28567-C03-03, and under the collaborative research project supported by the European Union MultiPARTES Project: FP7-ICT 287702. 2011-14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Distributed System for Intelligent Management of Lost or Abandoned Pets

  • Garrote Hildebrand, Daniel
  • Jiménez García, José Luis
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[EN] This paper presents the architecture of a mobile-based distributed system which aims to minimize the social impact of abandoned or lost animals. To reach this purpose the distributed system has two main goals: to obtain the best pets quality information and to optimize the reporting process that allows their rescue. The distributed system is based on the client-server paradigm. By using smart mobile devices clients may provide message warnings of animals localized. In order to enter data such as photographs, audio and artificial images, this system uses different mobile device interfaces. Messages with the pet information are stored in a server database to be processed intelligently. Data processing consists mainly in matching localized animals with lost animals, assigning abandoned animals to shelters and generating notifications for animal shelters or authorities. This matching uses an efficient selection algorithm based on common meta-information to each image. This efficient selection facilitates selective notification deliveries avoiding redundancy. This article shows the architecture details, as well as the first achieved results with prototypes and real data., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and the project "Real time distributed control systems" of the Support Program for Research and Development 2012 UPV (PAID-06-12)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Event Management Proposal for Distribution Data Service Standard

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper presents a proposal to extend the event management subsystem of the Distribution Data Service standard (DDS). The proposal allows user to optimize the use of DDS in networked control systems (NCS). DDS offers a simple event management system based on message filtering. The aim of the proposal is to improve the event management with three main elements: Events, Conditions and Actions. Actions are the new element proposed. Actions perform basic operations in the middleware, discharging the process load of control elements. The proposal is fully compatible with the standard and can be easily added to an existing system. Proposal has been tested in a distributed mobile robot navigation system with interesting results., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DP1201 1-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Integration of Mobile Robot Navigation on a Control Kernel Middleware based system

  • Munera Sánchez, Eduardo
  • Muñoz Alcobendas, Manuel
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
This paper introduces how a mobile robot can perform navigation tasks by taking the advantages of implementing a control kernel middleware (CKM) based system. Smart resources are also included into the topology of the system for improving the distribution of computational load of the needed tasks. The CKM and the smart resources are both highly recon gurable, even on execution time, and they also implement.lt detection mechanisms and QoS policies. By combining of these capabilities, the system can be dinamically adapted to the requirements of its tasks. Furthermore, this solution is suitable for most type of robots, including those which are provided of a low computational power because of the distribution of load, the bene ts of exploiting the smart resources capabilities, and the dynamic performance of the system., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-002-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Video Sensor Architecture for Surveillance Applications

  • Sánchez Peñarroja, Jordi
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software) in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%. © 2012 by the authors; licensee MDPI, Basel, Switzerland., This work has been partially supported by SENSE project (Specific Targeted Research Project within the thematic priority IST 2.5.3 of the 6th Framework Program of the European Commission: IST Project 033279), and has been also co-funded by the Spanish research projects SIDIRELI: DPI2008-06737-C02-01/02 and COBAMI: DPI2011-28507-C02-02, both partially supported with European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High Performance dynamic voltage/frequency scaling algorithm for real-time dynamic load management and code mobility

  • Coronel Parada, Javier Osvaldo
  • Simó Ten, José Enrique|||0000-0003-4677-7627
Modern cyber-physical systems assume a complex and dynamic interaction between the real world and the computing system in real-time. In this context, changes in the physical environment trigger changes in the computational load to execute. On the other hand, task migration services offered by networked control systems require also management of dynamic real-time computing load in nodes. In such systems it would be difficult, if not impossible, to analyse off-line all the possible combinations of processor loads. For this reason, it is worthwhile attempting to define new flexible architectures that enable computing systems to adapt to potential changes in the environment. We assume a system composed by three main components: the first one is responsible of the management of the requests arisen when new tasks require to be executed. This management component asks to the second component about the resources available to accept the new tasks. The second component performs a feasibility analysis to determine if the new tasks can be accepted coping with its real-time constraints. A new processor speed is also computed. A third component monitors the execution of tasks applying a fixed priority scheduling policy and additionally controlling the frequency of the processor. This paper focus on the second component providing a "correct" (a task never is accepted if it is not schedulable) and "near-exact" (a task is rarely rejected if it is schedulable) algorithm that can be applicable in practice because its low/medium and predictable computational cost. The algorithm analyses task admission in terms of processor frequency scaling. The paper presents the details of a novel algorithm to analyse tasks admission and processor frequency assignment. Additionally, we perform several simulations to evaluate the comparative performance of the proposed approach. This evaluation is made in terms of energy consumption, task rejection ratios, and real computing costs. The results of simulations show that from the cost, execution predictability, and task acceptance points of view, the proposed algorithm mostly outperforms other constant voltage scaling algorithms. © 2011 Elsevier Inc. All rights reserved., This work has been supported by the Spanish Government as part of the SIDIRELI project (DPI2008-06737-C02-02), COBAMI project (DPI2011-28507-C02-02) and by the Generalitat Valenciana (Project ACOMP-2010-038).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Architecting centralized coordination of soccer robots based on principle solution

  • Guarnizo Marín, José Guillermo
  • Low, Cheng Yee
  • Mellado, Martin|||0000-0002-3429-5316
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
Coordination strategy is a relevant topic in multi-robot systems, and robot soccer offers a suitable domain to conduct research in multi-robot coordination. Team strategy collects and uses environmental information to derive optimal team reactions, through cooperation among individual soccer robots. This paper presents a diagrammatic approach to architecting the coordination strategy of robot soccer teams by means of a principle solution. The proposed model focuses on robot soccer leagues that possess a central decision-making system, involving the dynamic selection of the roles and behaviors of the robot soccer players. The work sets out from the conceptual design phase, facilitating cross-domain development efforts, where different layers must be interconnected and coordinated to perform multiple tasks. The principle solution allows for intuitive design and the modeling of team strategies in a highly complex robot soccer environment with changing game conditions. Furthermore, such an approach enables systematic realization of collaborative behaviors among the teammates., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-C02-01/02. Jose G. Guarnizo was supported by a scholarship from the Administrative Department of Science, Technology and Innovation COLCIENCIAS, Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Relationship between quality of control and quality of service in mobile robot navigation

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This article presents the experimental work developed to test the viability and to measure the efficiency of an intelligent control distributed architecture. To do this, a simulated navigation scenario of Braitenberg vehicles has been developed. To test the efficiency, the architecture uses the performance as QoS parameter. The measuring of the quality of the navigation is done through the ITAE QoC parameter. Tested scenarios are: an environment without QoS and QoC man-aging, an environment with a relevant message filtering and an environment with a predictive filtering by the type of control. The results obtained show that some of the processing performed in the control nodes can be moved to the middleware to optimize the robot navigation., The work described in this article is a part of the coordinated project SIDIRELI: (Distributed Systems with Limited Resources) and COBAMI (Mission-Based Control) Education and Science Department, Spanish Government and European FEDER found. MICINN CICYT: SIDIRELI: DPI2008-06737-C02-01/02, COBAMI: DPI2011-28507-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart device definition and application on embedded system: performance and optimi-zation on a RGBD sensor

  • Jimenez-Garcia, Jose-Luis
  • Baselga-Masia, David
  • Munera Sánchez, Eduardo
  • Poza-Lujan, Jose-Luis
  • Posadas-Yagüe, Juan-Luis
  • Simó-Ten, José-Enrique
[EN] Embedded control systems usually are characterized by its limitations in terms of computational power and memory. Although this systems must deal with perpection and actuation signal adaptation and calculate control actions ensuring its reliability and providing a certain degree of fault tolerance. The allocation of these tasks between some different embedded nodes conforming a distributed control system allows to solve many of these issues. For that reason is proposed the application of smart devices aims to perform the data processing tasks related with the perception and actuation and offer a simple interface to be configured by other nodes in order to share processed information and raise QoS based alarms. In this work is introduced the procedure of implementing a smart device as a sensor as an embedded node in a distributed control system. In order to analyze its benefits an application based on a RGBD sensor implemented as a smart device is proposed., This work has been supported by the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN:DPI2011-28507-C02-01/02 and project “Real time distributed control systems” of the Support Program for Research and Development 2012 UPV (PAID-06-12)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Mobile-Based Distributed System for Managing Abandoned or Lost Pets

  • Garrote-Hildebrand, Daniel
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper presents the work in progress of a mobile-based distributed system which aims to minimize the social impact of abandoned or lost animals. System is based on the use of smart mobile devices to provide message warnings of animals localized. Messages are stored in a database to be processed. In order to enter data such as photography, audio and artificial images, system uses different mobile device interfaces. Data processing consists mainly in matching localized animals with lost animals, assigning abandoned animals at shelters and generating notifications for animal shelters or authorities. Currently, the system is in the development phase. The technical challenges in which we are working are to optimize data and metadata matching, and the management of message warning., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DP1201 1-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control kernel based adaptive control implementation

  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Albertos Pérez, Pedro
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[EN] A control system with distributed computing resources always should guarantee the safe control of the plant. In this contribution, the concept of control kernel is used for that purpose. Two types of nodes with different resources are defined: the powerful server node and the resource-constrained light node. This architecture allows to split the control tasks into two blocks. Those demanding strong computing resources are allocated in the server nodes and those compelling tasks required to ensure the safety of the controlled plant are allocated in the light nodes. Resource limitations lead to control adaptation. Two simple applications illustrate some of the benefits of this architecture with one server node and one light node, even the architecture can be extended to several nodes. In the first case, an adaptive control is implemented in the server node, providing the control algorithm to the light node, which is also able to compute a local safe control action. In the second experiment, two different control tasks requiring different resources are implemented in a mobile robot control. To keep bounded the computing time at the local level, the supervisor decides the time allocated to each activity, providing the resulting controller to the light node., This work has been partially granted by Conselleria de Educación Generalitat Valenciana, under PROMETEO project number 2008-088, and Ministerio de Ciencia e Innovaci´on under COBAMI project DPI2011-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart video sensors for 3D scene reconstruction of large infrastructures

  • Ripollés Mateu, Óscar Enrique
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
  • Vivó, Roberto|||0000-0002-0751-4114
This paper introduces a new 3D-based surveillance solution for large infrastructures. Our proposal is based on an accurate 3D reconstruction using the rich information obtained from a network of intelligent video-processing nodes. In this manner, if the scenario to cover is modeled in 3D with high precision, it will be possible to locate the detected objects in the virtual representation. Moreover, as an improvement over previous 2D solutions, having the possibility of modifying the view point enables the application to choose the perspective that better suits the current state of the scenario. In this sense, the contextualization of the events detected in a 3D environment can offer a much better understanding of what is happening in the real world and where it is exactly happening. Details of the video processing nodes are given, as well as of the 3D reconstruction tasks performed afterwards. The possibilities of such a system are described and the performance obtained is analyzed., This work has been partially supported by the ViCoMo project (ITEA2 project IP08009 funded by the Spanish MICINN with project TSI-020400-2011-57), the Spanish Government (TIN2009-14103-C03-03, DPI2008-06737-C02-01/02 and DPI 2011-28507-C02-02) and European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart Resource Integration for Robot Navigation on a Control Kerned Middleware Based System

  • Munera Sánchez, Eduardo
  • Muñoz Alcobendas, Manuel
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] This paper introduces how mobile robots can perform navigation tasks by implementing a system based on the control kernel middleware (CKM), and how can take benefit of this. Smart resources are also included into the topology of the system, improving the processing and distribution of the computational load required by the system tasks. The CKM and the smart resources are both highly reconfigurable, even on execution time, and they also implement fault detection mechanisms and Quality of Service (QoS) policies. By combining of these capabilities, the system can be dynamically adapted to the requirements of its tasks. Furthermore, this solution is designed to be implemented by almost every type of robot. The distribution of load make this system suitable even for those configurations which are provided with a low computational power. All these benefits are improved by exploiting the smart resources capabilities, and the dynamic performance of the system., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Reliable Handling of Real-Time Scheduling Attributes on Multiprocessor Platforms in Ada 2012

  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Crespo, Alfons|||0000-0002-6606-7406
The real-time attributes of a concurrent task define the parameters that will determine when the task can be allocated the required resources. Typical examples are the task s priority, the deadline, and the CPU (or CPUs) on which it must be executed. Since the 2012 revision, Ada is prepared for handling all these attributes. But the handling is per-attribute: it is not possible to change several attributes at a time, in a single call. Instead, they have to be changed one by one, which poses scheduling issues especially in multiprocessor platforms. This paper proposes and discusses approaches for implementing atomic changes of multiple scheduling attributes, thus mitigating or eliminating those issues., This work has been partially supported by the Spanish Government’s projects COBAMI (DPI2011-28507-C02-02) and Hi-PartES (TIN2011-28567-C03-01-02-03) and the European Commission’s MultiPARTES project (FP7-ICT-2011.3.4, Contract 287702).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Integrated Schedulers for a Predictable Interrupt Management on Real-Time Kernels

  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Crespo, Alfons|||0000-0002-6606-7406
To analyse the timeliness behaviour of a real-time system is one its key aspects. A big effort has been performed by the real-time community to develop accurate and more general schedulability analysis that can ensure the correct execution of the system. However, few works have analysed the side effects introduced by the scheduler and undesired execution of Interrupt Service Routines. Previous works addressed the interrupt interference by proposing an Integrated Interrupt Model that avoids unpredictable disturbance from external interrupts. Even so, the scheduling overhead due to the unnecessary activation of low priority tasks remains still unaddressed in this model. This work proposes a new Virtual implementation of an Integrated Interrupt Event-Driven Scheduler that copes with this pending issue. It also analyses the behaviour of the commonly used dual queue scheme under this kind of schedulers and proposes a more appropriated data structure to avoid unnecessary overheads., This work has been partially supported by the Spanish Government’s projectsC OBAMI (DPI2011-28507-C02-02) and Hi-PartES (TIN2011-28567-C03-01-02-03) and the European Commission’s MultiPARTES project (FP7-ICT-2011.3.4, Contract 287702).