Skip to main content

PERSONALIZACION DE IMPLANTES MEDIANTE MODELOS DE ELEMENTOS FINITOS A PARTIR DE IMAGENES MEDICAS 3D

DPI2013-46317-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulación estructural de espumas de aluminio a partir de imágenes 2D mediante la combinación de técnicas de homogeneización y machine learning, Structural simulation of 2D aluminium foam images by the use ofhomogenization and machine learning techniques

  • Ferrándiz-Catalá, Borja
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Nadal, Enrique|||0000-0002-2808-298X
[EN] The use of resistant, rigid, low-weight materials with good both acoustic and thermal properties is very interesting intoday¿s industry. Among these materials, one can find aluminium foams, whose mechanical behaviour is necessaryfor their application. In order to obtain the geometry of an aluminium foam, several techniques can be applied, and allof them are based in the fact that information is initially obtained by a Computed Axial Tomography (CAT). One ofthese techniques, known as segmentation, involves a CAD being generated from an image in order to build the FiniteElement (FE) model. Another option is to use techniques such as CutFEM or cgFEM, in which a certain amount ofpixels, which define the properties of the material, are embedded in each element. Among the existing methods forevaluating the material properties matrix, this study proposes the use of homogenization techniques, sped up by the useof machine learning techniques. This method has been applied to real problems obtaining a high speed up, conservingprecision., [ES] En la industria actual, el uso de materiales resistentes, rígidos, de bajo peso y con buenas propiedades tanto acústicas como térmicas es de gran interés. Entre estos materiales encontramos las espumas de aluminio. Para su uso, es necesario conocer su comportamiento estructural. Para la obtención de la geometría de una espuma de aluminio se pueden plantear diversas técnicas, todas ellas basadas en que la información inicial proviene de una imagen obtenida mediante una Tomografía Axial Computarizada (TAC). Una posible metodología, conocida comúnmente como segmentación, consiste en generar un CAD a partir de la imagen y de ahí el modelo de Elementos Finitos (EF). Otra opción es usar técnicas como el CellFEM o el cgFEM, donde cierta cantidad de píxeles, que definen las propiedades del material, son embebidos en cada elemento. De entre los diversos métodos que existen para evaluar la matriz de propiedades del material, en este trabajo se propone el uso de técnicas de homogeneización aceleradas mediante técnicas de machine learning. Dicha técnica se ha aplicado a problemas reales obteniendo un elevado speed up sin sacrificar la precisión., Los autores agradecen la ayuda recibida por el Ministerio de Economía y Competitividad a través del proyecto DPI2013-46317-R así como el apoyo recibido por la Generalitat Valenciana mediante el proyecto Prometeo/2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An extension of shape sensitivity analysis to an immersed boundary method based on Cartesian grids

  • Marco, Onofre
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Tur Valiente, Manuel|||0000-0001-7683-4771
[EN] Gradient-based shape optimization processes of mechanical components require the gradients (sensitivity) of the magnitudes of interest to be calculated with sufficient accuracy. The aim of this study was to develop algorithms for the calculation of shape sensitivities considering geometric representation by parametric surfaces (i.e. NURBS or T-splines) using 3D Cartesian h-adapted meshes independent of geometry. A formulation of shape sensitivities was developed for an environment based on Cartesian meshes independent of geometry, which implies, for instance, the need to take into account the special treatment of boundary conditions imposed in non body-fitted meshes. The immersed boundary framework required to implement new methods of velocity field generation, which have a primary role in the integration of both the theoretical concepts and the discretization tools in shape design optimization. Examples of elastic problems with three-dimensional components are given to demonstrate the efficiency of the algorithms., The authors wish to thank the Spanish Ministerio de Economia y Competitividad for the financial support received through the project DPI2013-46317-R and the FPI program (BES-2011-044080), and the Generalitat Valenciana through the Project PROMETEO/2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stabilized method of imposing Dirichlet boundary conditions using a recovered stress field

  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Marco, Onofre
[EN] This paper proposes a new formulation to impose Dirichlet boundary conditions on immersed boundary Cartesian Finite Element meshes. The method uses a recovered stress field calculated by Superconvergent Patch Recovery to stabilize the Lagrange multiplier formulation of the problem. The optimal convergence of the method and the convergence of the proposed iterative procedure are demonstrated. The proposed method is also suitable for problems with non-linear material behavior. Some numerical examples are included to confirm the theoretical results., The authors wish to thank the Spanish Ministerio de Economia y Competitividad for the financial support received through the project DPI2013-46317-R and Generalitat Valenciana through the project PROMETEO/2012/023. The authors are also grateful for the support of the Seventh Framework Programme Initial Training Network Funding under grant number 289361 'Integrating Numerical Simulation and Geometric Design Technology (INSIST)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A separated representation of an error indicator for the mesh refinement process under the proper generalized decomposition framework

  • Nadal, E.
  • Leygue, A.
  • Chinesta, F.
  • Beringhier, M.
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Today industries do not only require fast simulation techniques but also verification techniques for the simulations. The proper generalized decomposition (PGD) has been situated as a suitable tool for fast simulation for many physical phenomena. However, so far, verification tools for the PGD are under development. The PGD approximation error mainly comes from two different sources. The first one is related with the truncation of the PGD approximation and the second one is related with the discretization error of the underlying numerical technique. In this work we propose a fast error indicator technique based on recovery techniques, for the discretization error of the numerical technique used by the PGD technique, for refinement purposes., Authors 5 and 6 thank the financial support of the research Project DPI2013-46317-R of the Ministerio de Economia y Competitividad (Spain). The funding from Universitat Politecnica de Valencia and Generalitat Valenciana (PROMETEO/2012/023) are also acknowledged. These authors also thank the support of the Framework Programme 7 Initial Training Network Funding under Grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A modified perturbed Lagrangian formulation for contact problems

  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Navarro-Jiménez, José-Manuel|||0000-0002-7333-9377
  • Ródenas, Juan José|||0000-0003-2195-7920
The aim of this work is to propose a formulation to solve both small and large deformation contact problems using the finite element method. We consider both standard finite elements and the so-called immersed boundary elements. The method is derived from a stabilized Nitsche formulation. After introduction of a suitable Lagrange multiplier discretization the method can be simplified to obtain a modified perturbed Lagrangian formulation. The stabilizing term is iteratively computed using a smooth stress field. The method is simple to implement and the numerical results show that it is robust. The optimal convergence rate of the finite element solution can be achieved for linear elements., The authors wish to thank the Spanish Ministerio de Economia y Competitividad for the financial support received through the DPI Project DPI2013-46317-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Large deformation frictional contact analysis with immersed boundary method

  • Navarro-Jiménez, José-Manuel|||0000-0002-7333-9377
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Ródenas, Juan José|||0000-0003-2195-7920
[EN] This paper proposes a method of solving 3D large deformation frictional contact problems with the Cartesian Grid Finite Element Method. A stabilized augmented Lagrangian contact formulation is developed using a smooth stress field as stabilizing term, calculated by Zienckiewicz and Zhu Superconvergent Patch Recovery. The parametric definition of the CAD surfaces (usually NURBS) is considered in the definition of the contact kinematics in order to obtain an enhanced measure of the contact gap. The numerical examples show the performance of the method., The authors wish to thank the Spanish Ministerio de Economia y Competitividad the Generalitat Valenciana and the Universitat Politecnica de Valencia for their financial support received through the projects DPI2013-46317-R, Prometeo 2016/007 and the FPI2015 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust h-adaptive meshing strategy considering exact arbitrary CAD geometries in a Cartesian grid framework

  • Marco, O.
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Navarro-Jiménez, José-Manuel|||0000-0002-7333-9377
  • Tur Valiente, Manuel|||0000-0001-7683-4771
[EN] Geometry plays a key role in contact and shape optimization problems in which the accurate representation of the exact geometry and the use of adaptive analysis techniques are crucial to obtaining accurate computationally-efficient Finite Element (FE) simulations. We propose a novel algorithm to generate 3D h-adaptive meshes for an Immersed Boundary Method (IBM) based on Cartesian grids and the so-called NEFEM (NURBS-Enhanced FE Method) integration techniques. To increase the accuracy of the results at the minimum computational cost we seek to keep the efficient Cartesian structure of the mesh during the whole analysis process while considering the exact boundary representation of domains given by NURBS or T-Splines. Within the framework of Cartesian grids, the two significant contributions of this paper are: (a) the methodology used for the mesh-geometry intersection, which represents a considerable challenge due to their independence; and (b) the robust procedure used to generate the integration subdomains that exactly represent the CAD model. The numerical examples given show the proper convergence of the method, its capacity to mesh complex 3D geometries and that Cartesian grid-based IBM can be considered a robust and reliable tool in terms of accuracy and computational cost., The authors wish to thank the Spanish Ministerio de Economia y Competitividad for the financial support received through Project DPI2013-46317-R and the FPI program (BES-2011-044080), also the Generalitat Valenciana for the assistance received through Project PROMETEO/2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural shape optimization using Cartesian grids and automatic h-adaptive mesh projection

  • Marco, Onofre
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Nadal, Enrique|||0000-0002-2808-298X
  • Tur Valiente, Manuel|||0000-0001-7683-4771
[EN] We present a novel approach to 3D structural shape optimization that leans on an Immersed Boundary Method. A boundary tracking strategy based on evaluating the intersections between a fixed Cartesian grid and the evolving geometry sorts elements as internal, external and intersected. The integration procedure used by the NURBS-Enhanced Finite Element Method accurately accounts for the nonconformity between the fixed embedding discretization and the evolving structural shape, avoiding the creation of a boundary-fitted mesh for each design iteration, yielding in very efficient mesh generation process. A Cartesian hierarchical data structure improves the efficiency of the analyzes, allowing for trivial data sharing between similar entities or for an optimal reordering of thematrices for the solution of the system of equations, among other benefits. Shape optimization requires the sufficiently accurate structural analysis of a large number of different designs, presenting the computational cost for each design as a critical issue. The information required to create 3D Cartesian h- adapted mesh for new geometries is projected from previously analyzed geometries using shape sensitivity results. Then, the refinement criterion permits one to directly build h-adapted mesh on the new designs with a specified and controlled error level. Several examples are presented to show how the techniques here proposed considerably improve the computational efficiency of the optimization process., The authors wish to thank the Spanish Ministerio de Economia y Competitividad for the financial support received through the project DPI2013-46317-R and the FPI program (BES-2011-044080), and the Generalitat Valenciana through the project PROMETEO/2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A hierarchical h adaptivity methodology based on element subdivision, Metodología jerárquica h adaptativa basada en subdivisión de elementos

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] This paper presents a hierarchical h adaptive methodology for Finite Element Analysis based on the hierarchical relations between parent and child elements that come out if these elements are geometrically similar. Under this similarity condition the terms involved in the evaluation of element stiffness matrices of parent and child elements are related by a constant which is a function of the element sizes ratio (scaling factor). These relations have been the basis for the development of a hierarchical h adaptivity methodology based on element subdivision and the use of multipoint-constraints to ensure C0 continuity. The use of a hierarchical data structure significantly reduces the amount of calculations required for the mesh refinement, the evaluation of the global stiffness matrix, element stresses and element error estimation. The data structure also produces a natural reordering of the global stiffness matrix that improves the behaviour of the Cholesky factorization., [ES] En este artículo se presenta una metodología h adaptativa para el Análisis por Elementos Finitos basada en las relaciones jerárquicas entre elementos padre e hijo que surgen si estos elementos son geométricamente similares. Bajo esta condición de similitud, los términos resultantes de la evaluación de las matrices de rigidez de elementos padre e hijo están relacionados por una constante que es una función de la relación de tamaños de elemento (factor de escala). Estas relaciones han sido la base para el desarrollo de una metodología jerárquica h adaptativa basada en la subdivisión de elementos y el uso de restricciones multipunto para asegurar la continuidad C0 . El uso de una estructura de datos jerárquica reduce significativamente la cantidad de cálculos requeridos para el refinamiento de la malla, la evaluación de la matriz de rigidez global, las tensiones de los elementos y la estimación del error del elemento. La estructura de datos también produce un reordenamiento natural de la matriz de rigidez global que mejora el comportamiento de la factorización de Cholesky., The authors wish to thank the Spanish Ministerio de Economía y Competitividad for the fiancial support received through the project DPI2013-46317-R and the Generalitat Valenciana through the project PROMETEO/2016/007. The support of the Universidad Politécnica de Valencia is also acknowledged. The authors also want to thank Ana Ródenas’s help in the translation of this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exact 3D boundary representation in finite element analysis based on Cartesian grids independent of the geometry

  • Marco Alacid, Onofre
  • Sevilla, R.
  • Zhang, Yongjie
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Tur Valiente, Manuel|||0000-0001-7683-4771
[EN] This paper proposes a novel Immersed Boundary Method where the embedded domain is exactly described by using its Computer-Aided Design (CAD) boundary representation with Non-Uniform Rational B-Splines (NURBS) or T-splines. The common feature with other immersed methods is that the current approach substantially reduces the burden of mesh generation. In contrast, the exact boundary representation of the embedded domain allows to overcome the major drawback of existing immersed methods that is the inaccurate representation of the physical domain. A novel approach to perform the numerical integration in the region of the cut elements that is internal to the physical domain is presented and its accuracy and performance evaluated using numerical tests. The applicability, performance, and optimal convergence of the proposed methodology is assessed by using numerical examples in three dimensions. It is also shown that the accuracy of the proposed methodology is independent on the CAD technology used to describe the geometry of the embedded domain., With the support of the European Union Framework Program (FP7) under grant No. 289361 INSIST, Ministerio de Economia y Competitividad of Spain (DPI2010-20542)(DPI2013-46317-R), FPI program (BES-2011-044080), and Generalitat Valenciana (PROMETEO/2012/023). R. Sevilla gratefully acknowledges the financial support provided by the Ser Cymru National Research Network in Advanced Engineering and Materials. Y. Zhang was supported in part by the PECASE Award N00014-14-1-0234 and NSF CAREER Award OCI-1149591.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A recovery-explicit error estimator in energy norm for linear elasticity

  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Díez, P.
[EN] Significant research effort has been devoted to produce one-sided error estimates for Finite Element Analyses, in particular to provide upper bounds of the actual error. Typically, this has been achieved using residual-type estimates. One of the most popular and simpler (in terms of implementation) techniques used in commercial codes is the recovery-based error estimator. This technique produces accurate estimations of the exact error but is not designed to naturally produce upper bounds of the error in energy norm. Some attempts to remedy this situation provide bounds depending on unknown constants. Here, a new step towards obtaining error bounds from the recovery-based estimates is proposed. The idea is (1) to use a locally equilibrated recovery technique to obtain an accurate estimation of the exact error, (2) to add an explicit-type error bound of the lack of equilibrium of the recovered stresses in order to guarantee a bound of the actual error and (3) to efficiently and accurately evaluate the constants appearing in the bounding expressions, thus providing asymptotic bounds. The numerical tests with h-adaptive refinement process show that the bounding property holds even for coarse meshes, providing upper bounds in practical applications., The authors also thank the support of the Framework Programme 7 Initial Training Network Funding under grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology".