Skip to main content

ROBOTS MANIPULADORES MOVILES COMO CO-OPERARIOS: AUTONOMIA E INTERACCION EN LA COLABORACION HUMANO-ROBOT

DPI2014-57757-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Análisis Cinemático de Robots Manipuladores Redundantes: Aplicación a los Robots Kuka LWR 4+ y ABB Yumi, Kinematic analysis of redundant robotic manipulators: application to Kuka LWR 4+ and ABB Yumi

  • Zaplana, Isiah
  • Claret, Josep Arnau
  • Basanez, Luis
[ES] En este trabajo se presenta un análisis cinemático aplicado a dos manipuladores serie redundantes: el Kuka LWR 4+ y el ABB Yumi. En particular se deriva la cinemática directa para ambos manipuladores y se resuelve el problema de la cinemática inversa. Para el Kuka LWR 4+ dicha solución se obtiene en forma analítica, mientras que para el ABB Yumi se sigue un enfoque analítico y numérico. Además, se calculan simbólicamente tanto las singularidades del Kuka LWR 4+ como las direcciones singulares asociadas a estas. Este estudio contribuye al conocimiento cinemático de dos manipuladores redundantes de gran actualidad e interés para la comunidad robótica, y proporciona información útil para el diseño de diferentes algoritmos y leyes de control., [EN] This paper presents a kinematic analysis of two redundant serial manipulators: Kuka LWR 4+ and ABB Yumi. This analysis includes the derivation of the forward kinematics for both manipulators as well as the solution of the inverse kinematic problem. For the Kuka LWR 4+ this solution is analytical whereas for the ABB Yumi an analytical and numerical approach is proposed. Besides, the singularities of the Kuka LWR 4+ are obtained symbolically and the singular directions associated are calculated. This study intends to increase the kinematic knowledge of two actual redundant manipulators as well as to provide valuable information that can be used in the definition of different algorithms or control laws., Este trabajo ha sido realizado en parte gracias al apoyo de los proyectos DPI2013-40882-P, DPI2014-57757-R y las becas pre-doctorales BES-2012-059884 y BES-2012-054899.
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Esquema de integración para experimentación real con sistemas robóticos bi-brazo

  • Rojas-de-Silva, Abiud
  • Rodríguez, Carlos
  • Suárez, Raúl
[Resumen] En este artículo se presenta un esquema para la integración de un sistema robótico bi-brazo, para transformar resultados obtenidos de simulaciones en ejecuciones en un entornos real. Este esquema utiliza una capa de comunicación basada en "The Robot Operating System (ROS)" y el software "The Kautham Project", para calcular las trayectorias de movimiento, validar la existencia de soluciones de cinemáticas inversas, chequeo de colisiones y visualizar gráficamente la simulación del entorno. El sistema robótico bi-brazo utilizado es ADARS (Anthropomorphic Dual Arm Robotic System). Se han utilizado dos tipos de aplicaciones de cooperación bi-brazo para mostrar la validez del esquema durante la experimentación real., Este trabajo ha sido parcialmente financiado por el Gobierno de España a través de los proyectos DPI2013-40882-P y DPI2014-57757-R. A. Rojas fue parcialmente apoyado por la beca doctoral mexicana CONACyT 313768, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Una estrategia docente basada en el flipped classroom para mejorar la enseñanza de contenidos prácticos en asignaturas STEM

  • Zaplana, Isiah
  • Rosell, Jan
[Resumen] En algunas asignaturas STEM, el bloque práctico incluye el uso de programas informáticos desconocidos para los alumnos. Esto origina una serie de problemas para el alumnado tales como la falta de aprovechamiento de las sesiones prácticas, desmotivación y frustración. A fin de incrementar la motivación, satisfacción y aprovechamiento de los alumnos de las sesiones prácticas, este artículo propone una innovacón docente basada en el flipped classroom. Las ventajas propias de la estrategia presentada en este artículo son la estimulación del trabajo autónomo y del trabajo en equipo. Además, permite que las sesiones presenciales puedan centrarse en lo verdaderamente relevante de la asignatura mediante un aprendizaje basado en problemas. Después de revisar la literatura, se ha desarrollado la propuesta concreta a implementar y se ha verificado que cumple con los criterios de calidad de Chikering y Gamson. Se han planteado las diversas evidencias que se recogerán para el posterior análisis objetivo del impacto de esta innovación docente en los estudiantes., Este trabajo ha sido parcialmente financiado por el proyecto del Ministerio de Economía y Competitividad (MINECO) con referencia DPI2014-57757-R y de la beca predoctoral FPI con referencia BES-2012-059884, https://doi.org/10.17979/spudc.9788497498081
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Physics-based Motion Planning with Temporal Logic Specifications

  • Ud Din, Muhayy
  • Akbari, Aliakbar|||0000-0002-5290-9799
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
The final version of this work is available at https://doi.org/10.1016/j.ifacol.2017.08.1578 Copyright of all papers belongs to IFAC and must be referenced if derivative journal papers are produced from the conference papers., One of the main foci of robotics is nowadays centered in providing a great degree of autonomy to robots. A fundamental step in this direction is to give them the ability to plan in discrete and continuous spaces to find the required motions to complete a complex task. In this line, some recent approaches describe tasks with Linear Temporal Logic (LTL) and reason on discrete actions to guide sampling-based motion planning, with the aim of finding dynamically-feasible motions that satisfy the temporal-logic task specifications. The present paper proposes an LTL planning approach enhanced with the use of ontologies to describe and reason about the task, on the one hand, and that includes physics-based motion planning to allow the purposeful manipulation of objects, on the other hand. The proposal has been implemented and is illustrated with didactic examples with a mobile robot in simple scenarios where some of the goals are occupied with objects that must be removed in order to fulfill the task., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Motion planning by demonstration with human-likeness evaluation for dual-arm robots

  • García, Néstor
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a planning procedure that allows an anthropomorphic dual-arm robotic system to perform a manipulation task in a natural human-like way by using demonstrated human movements. The key idea of the proposal is to convert the demonstrated trajectories into attractive potential fields defined over the configuration space and then use an RRT*-based planning algorithm that minimizes a path-cost function designed to bias the tree growth towards the human-demonstrated configurations. The paper presents a description of the proposed approach as well as results from a conceptual and a real application example, the latter using a real anthropomorphic dual-arm robotic system. A path-quality measure, based on first-order synergies (correlations between joint velocities) obtained from real human movements, is also proposed and used for evaluation and comparison purposes. The obtained results show that the paths obtained with the proposed procedure are more human-like., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

k-PMP: enhancing physics-based motion planners with knowledge-based reasoning

  • Ud Din, Muhayy
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Akbari, Aliakbar|||0000-0002-5290-9799
Physics-based motion planning is a challenging task, since it requires the computation of the robot motions while allowing possible interactions with (some of) the obstacles in the environment. Kinodynamic motion planners equipped with a dynamic engine acting as state propagator are usually used for that purpose. The difficulties arise in the setting of the adequate forces for the interactions and because these interactions may change the pose of the manipulatable obstacles, thus either facilitating or preventing the finding of a solution path. The use of knowledge can alleviate the stated difficulties. This paper proposes the use of an enhanced state propagator composed of a dynamic engine and a low-level geometric reasoning process that is used to determine how to interact with the objects, i.e. from where and with which forces. The proposal, called ¿-PMP can be used with any kinodynamic planner, thus giving rise to e.g. ¿-RRT. The approach also includes a preprocessing step that infers from a semantic abstract knowledge described in terms of an ontology the manipulation knowledge required by the reasoning process. The proposed approach has been validated with several examples involving an holonomic mobile robot, a robot with differential constraints and a serial manipulator, and benchmarked using several state-of-the art kinodynamic planners. The results showed a significant difference in the power consumption with respect to simple physics-based planning, an improvement in the success rate and in the quality of the solution paths., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Análisis cinemático de robots manipuladores redundantes: Aplicación a los robots Kuka LWR 4+ y ABB Yumi

  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Claret, Josep A.
  • Basañez Villaluenga, Luis|||0000-0002-5599-1636
En este trabajo se presenta un análisis cinemático aplicado a dos manipuladores serie redundantes: el Kuka LWR 4+ y el ABB Yumi. En particular, se deriva la cinemática directa para ambos manipuladores y se resuelve el problema de la cinemática inversa. Para el Kuka LWR 4+ dicha solución se obtiene en forma analítica, mientras que para el ABB Yumi se sigue un enfoque analítico y numérico. Además, se calculan simbólicamente tanto las singularidades del Kuka LWR 4+ como las direcciones singulares asociadas a éstas. Este estudio contribuye al conocimiento cinemático de dos manipuladores redundantes de gran actualidad e interés para la comunidad robótica, y proporciona información útil para el diseño de diferentes algoritmos y leyes de control.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Teleoperating a mobile manipulator and a free-flying camera from a single haptic device

  • Claret Robert, Josep Arnau
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Basañez Villaluenga, Luis|||0000-0002-5599-1636
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a novel teleoperation system that allows the simultaneous and continuous command of a ground mobile manipulator and a free flying camera, implemented using an UAV, from which the operator can monitor the task execution in real-time. The proposed decoupled position and orientation workspace mapping allows the teleoperation from a single haptic device with bounded workspace of a complex robot with unbounded workspace. When the operator is reaching the position and orientation boundaries of the haptic workspace, linear and angular velocity components are respectively added to the inputs of the mobile manipulator and the flying camera. A user study on a virtual environment has been conducted to evaluate the performance and the workload on the user before and after proper training. Analysis on the data shows that the system complexity is not an obstacle for an efficient performance. This is a first step towards the implementation of a teleoperation system with a real mobile manipulator and a low-cost quadrotor as the free-flying camera.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Physics-based Motion Planning with Temporal Logic Specifications

  • Ud Din, Muhayy
  • Akbari, Aliakbar
  • Rosell Gratacòs, Jan
The final version of this work is available at https://doi.org/10.1016/j.ifacol.2017.08.1578 Copyright of all papers belongs to IFAC and must be referenced if derivative journal papers are produced from the conference papers., One of the main foci of robotics is nowadays centered in providing a great degree of autonomy to robots. A fundamental step in this direction is to give them the ability to plan in discrete and continuous spaces to find the required motions to complete a complex task. In this line, some recent approaches describe tasks with Linear Temporal Logic (LTL) and reason on discrete actions to guide sampling-based motion planning, with the aim of finding dynamically-feasible motions that satisfy the temporal-logic task specifications. The present paper proposes an LTL planning approach enhanced with the use of ontologies to describe and reason about the task, on the one hand, and that includes physics-based motion planning to allow the purposeful manipulation of objects, on the other hand. The proposal has been implemented and is illustrated with didactic examples with a mobile robot in simple scenarios where some of the goals are occupied with objects that must be removed in order to fulfill the task., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

k-PMP: enhancing physics-based motion planners with knowledge-based reasoning

  • Ud Din, Muhayy
  • Rosell Gratacòs, Jan
  • Akbari, Aliakbar
Physics-based motion planning is a challenging task, since it requires the computation of the robot motions while allowing possible interactions with (some of) the obstacles in the environment. Kinodynamic motion planners equipped with a dynamic engine acting as state propagator are usually used for that purpose. The difficulties arise in the setting of the adequate forces for the interactions and because these interactions may change the pose of the manipulatable obstacles, thus either facilitating or preventing the finding of a solution path. The use of knowledge can alleviate the stated difficulties. This paper proposes the use of an enhanced state propagator composed of a dynamic engine and a low-level geometric reasoning process that is used to determine how to interact with the objects, i.e. from where and with which forces. The proposal, called ¿-PMP can be used with any kinodynamic planner, thus giving rise to e.g. ¿-RRT. The approach also includes a preprocessing step that infers from a semantic abstract knowledge described in terms of an ontology the manipulation knowledge required by the reasoning process. The proposed approach has been validated with several examples involving an holonomic mobile robot, a robot with differential constraints and a serial manipulator, and benchmarked using several state-of-the art kinodynamic planners. The results showed a significant difference in the power consumption with respect to simple physics-based planning, an improvement in the success rate and in the quality of the solution paths., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Teleoperating a mobile manipulator and a free-flying camera from a single haptic device

  • Claret Robert, Josep Arnau
  • Zaplana Agut, Isiah
  • Basañez Villaluenga, Luis
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a novel teleoperation system that allows the simultaneous and continuous command of a ground mobile manipulator and a free flying camera, implemented using an UAV, from which the operator can monitor the task execution in real-time. The proposed decoupled position and orientation workspace mapping allows the teleoperation from a single haptic device with bounded workspace of a complex robot with unbounded workspace. When the operator is reaching the position and orientation boundaries of the haptic workspace, linear and angular velocity components are respectively added to the inputs of the mobile manipulator and the flying camera. A user study on a virtual environment has been conducted to evaluate the performance and the workload on the user before and after proper training. Analysis on the data shows that the system complexity is not an obstacle for an efficient performance. This is a first step towards the implementation of a teleoperation system with a real mobile manipulator and a low-cost quadrotor as the free-flying camera., Accepted version
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Análisis cinemático de robots manipuladores redundantes: Aplicación a los robots Kuka LWR 4+ y ABB Yumi

  • Zaplana Agut, Isiah
  • Claret, Josep A.
  • Basañez Villaluenga, Luis
En este trabajo se presenta un análisis cinemático aplicado a dos manipuladores serie redundantes: el Kuka LWR 4+ y el ABB Yumi. En particular, se deriva la cinemática directa para ambos manipuladores y se resuelve el problema de la cinemática inversa. Para el Kuka LWR 4+ dicha solución se obtiene en forma analítica, mientras que para el ABB Yumi se sigue un enfoque analítico y numérico. Además, se calculan simbólicamente tanto las singularidades del Kuka LWR 4+ como las direcciones singulares asociadas a éstas. Este estudio contribuye al conocimiento cinemático de dos manipuladores redundantes de gran actualidad e interés para la comunidad robótica, y proporciona información útil para el diseño de diferentes algoritmos y leyes de control., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Motion planning by demonstration with human-likeness evaluation for dual-arm robots

  • García, Néstor
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a planning procedure that allows an anthropomorphic dual-arm robotic system to perform a manipulation task in a natural human-like way by using demonstrated human movements. The key idea of the proposal is to convert the demonstrated trajectories into attractive potential fields defined over the configuration space and then use an RRT*-based planning algorithm that minimizes a path-cost function designed to bias the tree growth towards the human-demonstrated configurations. The paper presents a description of the proposed approach as well as results from a conceptual and a real application example, the latter using a real anthropomorphic dual-arm robotic system. A path-quality measure, based on first-order synergies (correlations between joint velocities) obtained from real human movements, is also proposed and used for evaluation and comparison purposes. The obtained results show that the paths obtained with the proposed procedure are more human-like., Peer Reviewed, Postprint (author's final draft)