Skip to main content

SOSTENIBILIDAD Y EFICIENCIA DEL MECANIZADO CRIOGENICO DE PLETINAS DE MATERIALES COMPUESTOS REFORZADOS CON NANOESTRUCTURAS

DPI2014-58007-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Cutting Parameter Selection for Efficient and Sustainable Repair of Holes Made in Hybrid Mg–Ti–Mg Component Stacks by Dry Drilling Operations

  • Rubio, Eva
  • Villeta López, María Del Carmen
  • Valencia Delfa, José
  • Sáenz de Pipaón, José
Drilling is one of the most common machining operations in the aeronautic and aerospace industries. For assembling parts, a large number of holes are usually drilled into the parts so that they can be joined later by rivets. As these holes are subjected to fatigue cycles, they have to be checked regularly for maintenance or repair, since small cracks or damage in its contour can quickly cause breakage of the part, which can have dangerous consequences. This paper focuses on finding the best combinations of cutting parameters to perform repair and maintenance operations of holes in stacked hybrid magnesium–titanium–magnesium components in an efficient, timely, and sustainable (without lubricants or coolants) manner, under dry drilling conditions. For the machining trials, experiments were designed and completed. A product of a full factorial 23 and a block of two factors (3 × 2) was used with surface roughness as the response variable measured as the mean roughness average. Analysis of variance (ANOVA) was used to examine the results. A set of optimized tool and cutting conditions is presented for performing dry drilling repair operations.
Docta Complutense
Publication Artículo científico (JournalArticle)

Experimental Study for Improving the Repair of Magnesium–Aluminium Hybrid Parts by Turning Processes

  • Rubio, Eva
  • Villeta López, María Del Carmen
  • Valencia Delfa, José Luis
  • Sáenz de Pipaón, José
One of the lightest metallic materials used in the aeronautics, aerospace, and automotive industries, among others, is magnesium, due to its excellent weight/strength ratio. Most parts used in these industries need to be made of materials that are rigid, strong, and lightweight, but sometimes the materials do not simultaneously satisfy all of the properties required. An alternative is to combine two or more materials, giving rise to a hybrid component that can satisfy a wider range of properties. The pieces machined in these industrial fields must satisfy stringent surface roughness requirements that conform to the design specifications. This work shows an experimental study to analyse the surface roughness reached in hybrid components made up of a base of magnesium alloy (UNS M11917) and two inserts of aluminium alloy (UNS A92024) obtained by turning. Its purpose is to determine the influence of the factors and their possible interactions on the response variable, the surface roughness Ra. The study is carried out using a design of experiments (DOE). A product of a full factorial 23 and a block of two factors 3 × 2 was selected. The factors identified as possible sources of variation of the surface roughness are: depth of cut, feed rate, spindle speed, type of tool, location with respect to the specimen (LRS), and location with respect to the insert (LRI). Data were analysed by means of the analysis of variance (ANOVA) method. The main conclusion is the possibility to carry out the repair and maintenance of parts of magnesium–aluminum hybrid components by dry turning; that is, without cutting fluids and, therefore, in the most sustainable way that the process can be carried out. In addition, different combinations of cutting parameters have been identified that allow these operations to be carried out in an efficient manner, reducing mechanization times and, therefore, also the direct and indirect costs associated with them.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

CO2 emissions reduction and energy efficiency improvements in paper making drying process control by sensors

  • Calvo Herrero, Luis
  • Domingo, Rosario
The drying process of paper has many production parameters that can influence both the energy consumed and the characteristics of paper produced. It was found that most of the previous studies conducted on this process assume that the conditions of the facilities are always appropriate. The control of the variables associated with air circulating inside the drying hood is essential to obtain a paper with adequate quality and obtain low ratios of energy consumption and CO2 emissions. This article proposes a new indirect method based on the study of the enthalpy of the airflows inside the production hall and thermographic images that helps to analyze the maintenance state of the enclosure hood drying section in a general process, whereby it can also estimate the emissions and energy losses. The combined use of sensors and equipment has helped to identify energy losses and potential savings in CO2 emissions. The developed method is applied to a paper manufacturing plant that has ratios of energy consumption and CO2 emissions very close to the product benchmark set by the European Authorities. The study corroborates that it can be identified as a significant energy loss in paper making drying process. Analyzing facilities that are in apparently good maintenance conditions, leaks are evident. These energy losses are very significant compared with the theoretical energy consumption, and it can affect the paper moisture profile., The authors would like to acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, Project DPI2014-58007-R.