Skip to main content

SOPORTES POLIMERICOS MULTIFUNCIONALES PARA CO-CULTIVO CELULAR INDIRECTO Y ESTIMULACION QUIMICA DESTINADOS A MIMETIZAR TEJIDO RENAL IN VITRO

DPI2015-65401-C3-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Correlating synthesis parameters with physicochemical properties of poly(glycerol sebacate)

  • Conejero-Garcia, Álvaro
  • Rivero-Gimeno, H.
  • Moreno-Sáez, Y.
  • Vilarino-Feltrer, G
  • Ortuño-Lizarán, Isabel
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Poly(glycerol sebacate), PGS, is an elastomeric biodegradable polyester increasingly proposed in a variety of biomedical applications. It is prepared by polycondensation of sebacic acid and glycerol in a first stage in which a prepolymer is obtained, followed by a curing to conveniently crosslink it. In this work, synthesis parameters such as the curing temperature and time, and the molar ratio between reactants, were systematically varied to correlate them with the physicochemical properties of the resulting polymer networks. The efficiency of each manufacturing process was quantified through, the relative mass effectively crosslinked and insoluble in tetrahydrofuran. Infrared spectra gave an estimation of the ratio of non-condensed polar terminal groups. These results were correlated with swelling results, which in turn provided the means to calculate the chains density through Flory-Rehner equilibrium swelling equation for lightly crosslinked polymers. The role of the synthesis parameters on the physical state of the resulting polymers, as well as their proneness to hydrolyze, were followed. The results obtained highlight the relevance of rinsing them following synthesis, to remove non-crosslinked chains that easily diffuse to the surrounding medium. Curing under mild conditions equimolar mixtures of sebacic acid and glycerol proved to lead to poorly crosslinked swellable networks, which hydrolyze easily in bulk mode. Alternative molar ratios yield sticky and difficult to handle materials at higher polyol fractions in the reactive mixture, whilst an excess of acid terminal groups leads to a faster mass loss by hydrolysis in aqueous media together with surface salts deposition, concomitant with a lesser cell viability in in vitro culture. PGS synthesized from an equimolar ratio between reactants and cured at 130 degrees C or higher, for 48 h or longer, show suitable features for their use in tissue engineering applications where hydrophobic surface-degradable rubbers are required, without significant differences among them., The authors acknowledge Spanish Ministerio de Economia y Competitividad through DPI2015-65401-C3-2-R project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanocomposites based on poly(glycerol sebacate) with silica nanoparticles with potential application in dental tissue engineering

  • Tallá Ferrer, C.
  • Rizk, M.
  • Sydow, H.G.
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Nanocomposites based on poly(glycerol sebacate) with silica nanoparticles were synthesized to explore their potential use in the biomedical field. The nanoparticles were two distinct polyhedral oligomeric silsesquioxanes (POSS), both used at 5% wt/wt concentration, specifically methacrylisobutyl POSS and methacryl POSS. These materials were investigated for their possible application as coatings as well as with regenerative purposes in dental engineering, and their viability for this application was assessed. Thus, pure PGS and nanohybrids thereof were obtained as scaffolds (that is, porous structures, designed with regenerative purposes) and as films (intended for coatings and to be used as controls)., The authors acknowledge Dr. Kirsten Techmer from Geoscience Center of the Georg-August-University Gottingen for performing the EDX-SEM analysis, the assistance and advice of the Julich Center for Neutron Science (JCNS) and Institute for Complex Systems (ICS), Forschungszentrum Julich GmbH (Germany), and the Electron Microscopy Service of the Universitat Politecnica de Valencia (Spain). This work was partially funded by the Spanish Ministerio de Economía y Competitividad through DPI2015-65401-C3-2-R project and by the German Research Foundation [DFG/MWK INST 1525/39-1 FUGG]. A.V.-Ll. acknowledges the support of the Generalitat Valenciana, Conselleria de Educación, Investigación, Cultura y Deporte through project AEST/2018/014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of Curing Temperature of Poly(Glycerol Sebacate) Substrates on Protein-Cell Interaction and Early Cell Adhesion

  • Martín-Cabezuelo, Rubén|||0000-0002-5642-4692
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] A novel procedure to obtain smooth, continuous polymeric surfaces from poly(glycerol sebacate) (PGS) has been developed with the spin-coating technique. This method proves useful for separating the effect of the chemistry and morphology of the networks (that can be obtained by varying the synthesis parameters) on cell-protein-substrate interactions from that of structural variables. Solutions of the PGS pre-polymer can be spin-coated, to then be cured. Curing under variable temperatures has been shown to lead to PGS networks with different chemical properties and topographies, conditioning their use as a biomaterial. Particularly, higher synthesis temperatures yield denser networks with fewer polar terminal groups available on the surface. Material-protein interactions were characterised by using extracellular matrix proteins such as fibronectin (Fn) and collagen type I (Col I), to unveil the biological interface profile of PGS substrates. To that end, atomic force microscopy (AFM) images and quantification of protein adsorbed in single, sequential and competitive protein incubations were used. Results reveal that Fn is adsorbed in the form of clusters, while Col I forms a characteristic fibrillar network. Fn has an inhibitory effect when incubated prior to Col I. Human umbilical endothelial cells (HUVECs) were also cultured on PGS surfaces to reveal the effect of synthesis temperature on cell behaviour. To this effect, early focal adhesions (FAs) were analysed using immunofluorescence techniques. In light of the results, 130 degrees C seems to be the optimal curing temperature since a preliminary treatment with Col I or a Fn:Col I solution facilitates the formation of early focal adhesions and growth of HUVECs., This research was funded by the Spanish Ministerio de Economia y Competitividad, grant number DPI2015-65401-C3-2-R. A. Valles acknowledges the support of the Generalitat Valenciana, Conselleria de Educacion, Investigacion, Cultura y Deporte through project AEST/2020/052.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Candidate Polyurethanes Based on Castor Oil (Ricinus communis), with Polycaprolactone Diol and Chitosan Additions, for Use in Biomedical Application

  • Uscategui, Yomaira L.
  • Diaz, Luis E.
  • Valero, Manuel F.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Serrano, María-Antonia|||0000-0002-1508-6893
[EN] Polyurethanes are widely used in the development of medical devices due to their biocompatibility, degradability, non-toxicity and chemical versatility. Polyurethanes were obtained from polyols derived from castor oil, and isophorone diisocyanate, with the incorporation of polycaprolactone-diol (15% w/w) and chitosan (3% w/w). The objective of this research was to evaluate the effect of the type of polyol and the incorporation of polycaprolactone-diol and chitosan on the mechanical and biological properties of the polyurethanes to identify the optimal ones for applications such as wound dressings or tissue engineering. Polyurethanes were characterized by stress-strain, contact angle by sessile drop method, thermogravimetric analysis, differential scanning calorimetry, water uptake and in vitro degradation by enzymatic processes. In vitro biological properties were evaluated by a 24 h cytotoxicity test using the colorimetric assay MTT and the LIVE/DEAD kit with cell line L-929 (mouse embryonic fibroblasts). In vitro evaluation of the possible inflammatory effect of polyurethane-based materials was evaluated by means of the expression of anti-inflammatory and proinflammatory cytokines expressed in a cellular model such as THP-1 cells by means of the MILLIPLEX® MAP kit. The modification of polyols derived from castor oil increases the mechanical properties of interest for a wide range of applications. The polyurethanes evaluated did not generate a cytotoxic effect on the evaluated cell line. The assessed polyurethanes are suggested as possible candidate biomaterials for wound dressings due to their improved mechanical properties and biocompatibility., This research was funded by the UNIVERSIDAD DE LA SABANA, grant number ING-202-2018 and by COLCIENCIAS under scholarship grant 617-2-2014. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. J.A.G.-T. and A.V.-LL. acknowledge the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through project DPI2015-65401-C3-2-R (including FEDER financial support).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of an organotin catalyst on the physicochemical properties and biocompatibility of castor oil-based polyurethane/cellulose composites

  • Villegas-Villalobos, S.
  • Diaz, L.E.
  • Valero, M.F.
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
[EN] Polyurethane/cellulose composites were synthesized from castor-oil-derived polyols and isophorone diisocyanate using dibutyltin dilaurate (DBTDL) as the catalyst. Materials were obtained by adding 2% cellulose in the form of either microcrystals (20 lm) or nanocrystals obtained by acid hydrolysis. The aim was to assess the effects of filler particle size and the use of a catalyst on the physicochemical properties and biological response of these composites. The addition of the catalyst was found to be essential to prevent filler aggregations and to enhance the tensile strength and elongation at break. The cellulose particle size influenced the composite properties, as its nanocrystals heighten hydrogen bond interactions between the filler surface and polyurethane domains, improving resistance to hydrolytic degradation. All hybrids retained cell viability, and the addition of DBTDL did not impair their biocompatibility. The samples were prone to calcification, which suggests that they could find application in the development of bioactive materials., Universidad de La Sabana supported this work under Grant No. ING-176-2016. S.V.V. acknowledges the Universidad de La Sabana for the Teaching Assistant Scholarship for his master's studies. J.A.G.T. and A.V.L. acknowledge the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through project DPI2015-65401-C3-2-R (including FEDER financial support). The authors acknowledge the assistance and advice of the Electron Microscopy Service of the UPV. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Surface stiffening and enhanced photoluminescence of ion implanted cellulose - polyvinyl alcohol - silica composite

  • Shanthini, G. M.
  • Sakthivel, N.
  • Menon, Ranjini
  • Nabhiraj, P. Y.
  • Krishna, J. B. M.
  • Kalkura, S. Narayana
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Novel Cellulose (Cel) reinforced polyvinyl alcohol (PVA)-Silica (Si) composite which has good stability and in vitro degradation was prepared by lyophilization technique and implanted using N3+ ions of energy 24 keV in the fluences of 1 x 10(15), 5 x 10(15) and 1 x 10(16) ions/cm(2). SEM analysis revealed the formation of microstructures, and improved the surface roughness on ion implantation. In addition to these structural changes, the implantation significantly modified the luminescent, thermal and mechanical properties of the samples. The elastic modulus of the implanted samples has increased by about 50 times compared to the pristine which confirms that the stiffness of the sample surface has increased remarkably on ion implantation. The photoluminescence of the native cellulose has improved greatly due to defect site, dangling bonds and hydrogen passivation. Electric conductivity of the ion implanted samples was improved by about 25%. Hence, low energy ion implantation tunes the mechanical property, surface roughness and further induces the formation of nano structures. MG63 cells seeded onto the scaffolds reveals that with the increase in implantation fluence, the cell attachment, viability and proliferation have improved greatly compared to pristine. The enhancement of cell growth of about 59% was observed in the implanted samples compared to pristine. These properties will enable the scaffolds to be ideal for bone tissue engineering and imaging applications., G.M.S. acknowledges CSIR, India (Grant no: 09/468 (0474)/2013-EMR-I) and S.N.K. thanks the award of Erasmus-Mundus Svaagata for providing financial support to carry out this research. G.M.S., N.S. and S.N.K. acknowledge the support of UGC National facility for characterization facility. J.A.G.T. acknowledges the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through the project DPI2015-65401-C3-2-R (including the FEDER financial support). CIBER-BBN, Spain is an initiative funded by the VI National R&D Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. AFM was conducted by the microscopy service of the UPV, whose advice was greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polyurethane-based bioadhesive synthesized from polyols derived from castor oil (Ricinus communis) and low concentration of chitosan

  • Uscátegui, Yomaira L.
  • Arevalo-Alquichire, Said J.
  • Diaz, Luis E.
  • Valero, Manuel F.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Polyurethane-based bioadhesive was synthesized with polyols derived from castor oil (chemically modified and unmodified) and hexamethylene diisocyanate with chitosan addition as a bioactive filler. The objective was to evaluate the effect of type of polyols with the incorporation of low-concentrations of chitosan on the mechanical and biological properties of the polymer to obtain suitable materials in the design of biomaterials. The results showed that increasing physical crosslinking increased the mechanical and adhesive properties. An in vitro cytotoxic test of polyurethanes showed cellular viability. The biocompatibility of the polyurethanes favors the adhesion of L929 cells at 6, 24, and 48 h. The polyurethanes showed bacterial inhibition depending on the polyol and percentage of chitosan. The antibacterial effect of the polyurethanes for Escherichia coli decreased 60-90% after 24 h. The mechanical and adhesive properties together with biological response in this research suggested these polyurethanes as external application tissue bioadhesives., This work was supported by the Universidad de La Sabana under grant number ING-176-2016 and by Colciencias under scholarship grant 617-2-2014. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. J.A.G.T. and A.V.L. acknowledge the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through project DPI2015-65401-C3-2-R (including FEDER financial support). Finally, the authors thank the Universitat Politecnica de Valencia for assistance and advice with the equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The effect of salt fusion processing variables on structural, physicochemical and biological properties of poly(glycerol sebacate) scaffolds

  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Muñoz-Santa, A.
  • Conejero-Garcia, Álvaro
[EN] Poly(glycerol sebacate), PGS, is a biodegradable elastomer recently proposed in the form of scaffolds for cardiac, vascular, cartilage or neural applications. In the present work, several processing variables for the fabrication of PGS scaffolds by the salt fusion method were systematically studied, namely the pre-polymer/porogen ratio, the salt particles average size, use of tetrahydrofuran to dissolve the pre-polymer for its injection in the porogen template, and the curing pressure. The effect of these variables on their structural, mechanical and biological properties was assessed to select those leading to optimal ones in terms of their potential performance in tissue engineering applications., The authors acknowledge Spanish Ministerio de Economia y Competitividad through DPI2015-65401-C3-2-R project. The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the Hydrophobic-Hydrophilic Nature of Biomedical Polymers and Nanocomposites on In Vitro Biological Development

  • Torres-Roca, Elena
  • Napiwocki, Brett
  • Lih-Sheng, Turng
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] In this work, cell viability, proliferation, and morphology are studied on two pairs of polymers used in the biomedical field that have similar chemical natures but differ in hydrophobicity. On the one hand, hydrophobic polyester poly(epsilon-caprolactone), is modified by blending with poly(lactic acid). On the other hand, the hydrophilic acrylate poly(2-hydroxyethyl methacrylate) (PHEMA), is copolymerized with ethyl methacrylate (EMA) at a ratio of 50/50 wt.% P(HEMA-co-EMA). These two polymers are used as neat resins or combined with hydroxyapatite (HA) nanoparticles and halloysite nanotubes (HNTs) to enhance cell attachment and mechanical properties. Cell proliferation is greater on moderately hydrophobic materials at the initial stage, with cells showing a round shape and aggregating in clusters. However, over longer culture periods, cell proliferation is more advanced on more hydrophilic surfaces, where cells spread out with a flatter shape. Improvement of cell viability is observed with the addition of HA and HNTs., A.V.-L. acknowledges Spanish Ministry of Economy and Competitiveness through DPI2015-65401-C3-2-R project., A.V.-L. acknowledges Spanish Ministry of Economy and Competitiveness through DPI2015-65401- C3-2-R project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polyurethanes from modified castor oil and chitosan. Synthesis, characterization, in vitro degradation, and cytotoxicity

  • Arévalo-Alquichire, Said
  • Ramírez, Claudia
  • Andrade, Laura
  • Uscategui, Yomaira
  • Diaz, Luis E.
  • Valero, Manuel F.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Polyurethanes (PUs) from castor oil (CO), modified CO (MCO) by transesterification reaction, isophorone diisocyanate (IPDI) in an NCO/OH ratio equal to 1, and chitosan (CS) were synthesized to assess their potential as biomaterials. PUs were characterized by Fourier transform infrared spectroscopy, hydroxyl value (ASTM D1957), thermogravimetric analysis, Shore A hardness (ASTM D2240), and scanning electronic microscopy (SEM). Also, contact angle, water retention and in vitro degradation in PBS, and cell viability on fibroblast were performed. The hydroxyl value confirms CO modification, and IR analysis confirms urethane bond formation. The thermal assay does not show new degradation stages and polyol with a high functionality had better hardness performance due to the increase in cross-linking. The micrograph shows micro-phase separation of both polymers. The contact angle shows the hydrophobic surface with an angle over 65°, and the CS and polyol type do not affect swelling and in vitro degradation due to phase separation between both polymers. The cell viability was over 70% in all cases, and solid polymers and degradation products involve non-cytotoxic effects on the samples. The results suggest a potential for these formulations in the biomedical field., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by Universidad de La Sabana under Grant number ING-160-2015. Also, Jose A. Gomez-Tejedor and Ana Valles-Lluch acknowledge the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through the project DPI2015-65401-C3-2-R (including the FEDER financial support).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Amphipathic Substrates Based on Crosslinker-Free Poly(epsilon-Caprolactone):Poly(2-Hydroxyethyl Methacrylate) Semi-Interpenetrated Networks Promote Serum Protein Adsorption

  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Salgado-Gallegos, Alfredo
  • De-la-Concepción-Ausina, Joan
  • Shahrousvand, Mohsen
[EN] A simple procedure has been developed to synthesize uncrosslinked soluble poly(hydroxyethyl methacrylate) (PHEMA) gels, ready for use in a subsequent fabrication stage. The presence of 75 wt % methanol (MetOH) or dimethylformamide (DMF) impedes lateral hydroxyl-hydroxyl hydrogen bonds between PHEMA macromers to form during their solution polymerization at 60 degrees C, up to 24 h. These gels remain soluble when properly stored in closed containers under cold conditions and, when needed, yield by solvent evaporation spontaneous physically-crosslinked PHEMA adapted to the mould used. Moreover, this two-step procedure allows obtaining multicomponent systems where a stable and water-affine PHEMA network would be of interest. In particular, amphiphilic polycaprolactone (PCL):PHEMA semi-interpenetrated (sIPN) substrates have been developed, from quaternary metastable solutions in chloroform (CHCl3):MetOH 3:1 wt. and PCL ranging from 50 to 90 wt % in the polymer fraction (thus determining the composition of the solution). The coexistence of these countered molecules, uniformly distributed at the nanoscale, has proven to enhance the number and interactions of serum protein adsorbed from the acellular medium as compared to the homopolymers, the sIPN containing 80 wt % PCL showing an outstanding development. In accordance to the quaternary diagram presented, this protocol can be adapted for the development of polymer substrates, coatings or scaffolds for biomedical applications, not relying upon phase separation, such as the electrospun mats here proposed herein (12 wt % polymer solutions were used for this purpose, with PCL ranging from 50% to 100% in the polymer fraction)., This research was funded by the Spanish Ministerio de Economia y Competitividad, grant number DPI2015-65401-C3-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLA/PCL electrospun membranes of tailored fibres diameter as drug delivery systems

  • Herrero-Herrero, María
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] The main electrospinning parameters, i.e., polymer concentration in the injectable solution, solvents used and their proportion, flow rate, voltage and distance to collector were herein systematically modified to analyse their particular influence in fibres diameter of electrospun membranes of poly(lactic acid), polycaprolactone and their mixture. As a result of this analysis, the procedures to obtain membranes of these polymers and blend with under- and above-micron-sized fibres were established, in which the solvents ratio (chloroform/methanol and dichloromethane/dimethylformamide) and voltage were found to play the major role. Moreover, the plausible differential effect of these fibres diameters (0.8 and 1.8 ¿m) in the controlled release of a molecule of interest was explored, using bovine serum albumin (BSA), proving that the most effective configuration for BSA release among those studied was the PLA-PCL combination in membranes of above-micron fibres diameter., The authors acknowledge Spanish Ministerio de Economia y Competitividad through DPI2015-65401-C3-2-R project, and the assistance and advice of the Electron Microscopy Service of the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tunability of polycaprolactone hydrophilicity by carboxymethyl cellulose loading

  • Alemán-Domínguez, M.E.
  • Ortega, Z.
  • Benítez, A.N.
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Carboxymethyl cellulose (CMC) is herein proposed as additive in polycaprolactone (PCL) matrices to obtain composites with tunable hydrophilicity. This composite material can be obtained by compression molding. The thermogravimetric degradation profile, the FTIR spectra, values of the water contact angle (WCA), water and phosphate-buffered saline uptake values, and the results of a cytotoxicity assessment are presented herein. The concentrations of CMC in the groups of samples are 0, 2, 5, 10, and 20%. The WCA on the prewetted state decreases proportionally to the concentration of the additive. These results evidence the possibility of obtaining a PCL-based composite with tunable hydrophilicity. Besides, the biological assessment does not reveal any cytotoxic effects. Therefore, the addition of CMC entails an innovative strategy to control the water affinity of PCL in biomedical applications where such feature is required to improve diffusion of biological medium through, or accelerate degradation by hydrolysis., M.E.A.D. expresses her gratitude for the funding through the PhD Grant Program of ULPGC (Code of the grant: PIFULPGC-2014-ING-ARQU-2). J.A.G.T., A.V.L., and G.V.F. acknowledge the support of the Spanish Ministry of Economy and Competitiveness (MINECO) through the project DPI2015-65401-C3-2-R (including the FEDER financial support).