Skip to main content

DESARROLLO DE TECNICAS DE CONTROL PREDICTIVO JERARQUICO BASADO EN SISTEMAS MULTIAGENTE. APLICACION A SISTEMAS DE GRAN ESCALA

DPI2015-67341-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE SALAMANCA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Control predictivo no lineal tolerante a fallos en una planta de tratamiento de aguas residuales

  • Sánchez Fernández, Álvar
  • Francisco, Mario
  • Fuente, María Jesús
  • Vega, Pastora
[Resumen] En este trabajo se pretende diseñar un control tolerante a fallos, es decir un sistema que sea capaz de detectar cambios en el sistema que puedan provocar que el proceso abandone su modo de funcionamiento normal, y reconfigurar el controlador para que el sistema siga funcionando a pesar de los fallos. El sistema está formado por un controlador base, en este caso un control predictivo no lineal, un módulo de detección e identificación de fallos basado en el análisis de componentes principales (PCA) y un método de reconfiguración del controlador, que en este caso consiste en sustituir los sensores que fallan por un sensor software calculado con información del resto de las variables del sistema. Este sistema se ha probado en una planta de tratamiento de aguas residuales, y los resultados obtenidos muestran un funcionamiento adecuado a pesar de los fallos., Los autores desean agradecer a la Comisión Europea y al Ministerio de Economía y Competitividad de España por su apoyo financiero a través de los proyectos DPI20015-67341-C2-1-R y DPI20015-67341-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optimal control of wastewater treatment plants using economic-oriented model predictive dynamic strategies

  • Revollar, Silvana|||0000-0001-9869-6437
  • Vega, Pastora|||0000-0002-3504-2273
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Francisco, Mario|||0000-0002-6505-0936
This paper addresses the implementation of economic-oriented model predictive controllers for the dynamic real-time optimization of the operation of wastewater treatment plants (WWTP). Both the economic-optimizing controller (pure-EMPC) and the economic-oriented tracking controller (Hybrid-EMPC, or HEMPC) formulations are validated in the benchmark simulation model (BSM1) platform that represents the behavior of a characteristic activated sludge process. The objective of the controllers is to ensure the appropriate operation of the plant, while minimizing the energy consumption and the fines for violations of the limits of the ammonia concentration in the effluent along the full operating period. A non-linear reduced model of the activated sludge process is used for predictions to obtain a reasonable computing effort, and techniques to deal with model-plant mismatch are incorporated in the controller algorithm. Different designs and structures are compared in terms of process performance and energy costs, which show that the implementation of the proposed control technique can produce significant economic and environmental benefits, depending on the desired performance criteria.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Wastewater treatment plant operation, Simple control schemes with a holistic perspective

  • Revollar, Silvana|||0000-0001-9869-6437
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Vega, Pastora|||0000-0002-3504-2273
  • Francisco, Mario|||0000-0002-6505-0936
  • Meneses, Montse|||0000-0002-5846-2676
In this paper, a control approach for improving the overall efficiency of a wastewater treatment plant (WWTP) is presented. It consists of a cascaded control system that uses a global performance indicator as the controlled variable to drive the plant to operating conditions that satisfies trade-offs involved in the WWTP operation, improving the global performance of the plant. The selected global performance indicator is the N/E index that measures the ratio between the amount of nitrogenated compounds eliminated (kgN) and the energy (kWh) required to achieve that goal. This index links the variables of the activated sludge process with the energy consumed in the whole plant, thus the control strategy takes actions based on plantwide considerations. An external Proportional Integral (PI) controller changes the DO set point according to the N/E index and the basic dissolved oxygen (DO) control scheme in the activated sludge process follows this reference changes varying the aeration intensity. An outer loop with an event-based controller is used to compute the index values when the DO concentration is driven to excessively low limits, preventing long operation periods in this undesirable condition. Simple proportional integral controllers (PI) are used to adapt the strategy to the automation systems available in WWTPs. The implementation in the Benchmark Simulation Model 2 (BSM2) demonstrates the potential of the proposed approach. The results show the possibilities of the N/E index to be used as an indicator of global performance of WWTPs. It provides a link between water line objectives and energy consumption in the whole plant that can be exploited to introduce plantwide considerations in alternative control strategies formulated to drive the plant to operating conditions that optimize the overall process efficiency.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Quantifying the benefit of a dynamic performance assessment of WWTP

  • Revollar, Silvana|||0000-0001-9869-6437
  • Meneses, Montse|||0000-0002-5846-2676
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Vega, Pastora|||0000-0002-3504-2273
  • Francisco, Mario|||0000-0002-6505-0936
In this work a comprehensive analysis of the environmental impact of the operation of a wastewater treatment plant (WWTP) using different control strategies is carried out considering the dynamic evolution of some environmental indicators and average operation costs. The selected strategies are PI (proportional integral) control schemes such as dissolved oxygen control in the aerobic zone (DO control), DO control and nitrates control in the anoxic zone (DO + NO control) and regulation of ammonium control at the end of aerobic zone (Cascade Scommonly used in WWTPs to maintain the conditions that ensure the desired effluent quality in a variable influent scenario. The main novelty of the work is the integration of potential insights into environmental impact from the analysis of dynamic evolution of environmental indicators at different time scales. The consideration of annual, bimonthly and weekly temporal windows to evaluate performance indicators makes it possible to capture seasonal effects of influent disturbances and control actions on environmental costs of wastewater treatment that are unnoticed in the annual-based performance evaluation. Then, in the case of periodic events, it is possible to find solutions to improve operation by the adjustment of the control variables in specific periods of time along the operation horizon. The analysis of the annual average and dynamic profiles (weekly and bimonthly) of environmental indicators showed that ammonium-based control (Cascade S) produce the best compromise solution between environmental and operation costs compared with DO control and DO + NO control. An alternative control strategy, named S Q , has been defined considering a sequence of changes on ammonium set-point (S) and carbon dosage (Q) on different temporal windows. It is compared with DO control considering weekly and bimonthly profiles and annual average values leading to the conclusion that both strategies, Cascade S and S Q , produce an improvement of dynamic and annual average environmental performance and operation costs, but benefits of Cascade S strategy are associated with reduction of electricity consumption and emissions to water, while S Q strategy reduces electricity consumption, use of chemicals (reducing external carbon dosage) and operation costs.