Skip to main content

INTERACCION CONVERTIDOR-RED Y CONVERTIDOR-CONVERTIDOR EN REDES HVDC Y HVAC CON ALTA PENETRACION DE GENERACION RENOVABLE

DPI2017-84503-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aggregation of Type-4 Large Wind Farms Based on Admittance Model Order Reduction

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] This paper presents an aggregation technique based on the resolution of a multi-objective optimization problem applied to the admittance model of a wind power plant (WPP). The purpose of the presented aggregation technique is to reduce the order of the wind power plant model in order to accelerate WPP simulation while keeping a very similar control performance for both the simplified and the detailed models. The proposed aggregation technique, based on the admittance model order reduction, ensures the same DC gain, the same gain at the operating band frequency, and the same resonant peak frequency as the detailed admittance model. The proposed aggregation method is validated considering three 400-MW grid-forming Type-4 WPPs connected to a diode rectifier HVDC link. The proposed aggregation technique is compared to two existing aggregation techniques, both in terms of frequency and time response. The detailed and aggregated models have been tested using PSCAD-EMTsimulations, with the proposed aggregated model leading to a 350-fold reduction of the simulation time with respect to the detailed model. Moreover, for the considered scenario, the proposed aggregation technique offers simulation errors that are, at least, three-times smaller than previously-published aggregation techniques., The authors would like to thank the support of the Spanish Ministry of Science, Innovation and Universities and EU FEDER funds under Grants DPI2014-53245-R and DPI2017-84503-R. This project has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 691714
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Small-signal stability and fault performance of mixed grid forming and grid following offshore wind power plants connected to a HVDC-diode rectifier

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
  • Peña, Rubén
[EN] This study aims at validating the simultaneous operation of grid following and grid forming wind power plants when connected to a common diode rectifier-based HVDC link. The controllers for both grid forming and grid following wind turbines include fault-ride-through capability with soft restoration of the off-shore AC-grid. Current and voltage controllers are developed in the stationary alpha beta reference frame. The presented control and soft restoration strategies are based on local measurements only and do not require communication between wind turbine generators. The small-signal stability analysis of the mixed system in multiple d-q axis using detailed string models is carried out in order to show the sensitivity to grid following phase-locked-loop gains and to grid forming droop gains. Interoperability between grid forming and grid following wind turbines during transients is shown by means of detailed simulation during symmetric faults in different locations of the off-shore grid., The authors would like to thank the support of the Spanish Ministry of Economy and EU FEDER funds under grants DPI2014-53245-R and DPI2017-84503-R. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 691714. Project partially funded by the EU through the Comunitat Valenciana2014-2020 European Regional Development Fund (FEDER) OperatingProgram (grant IDIFEDER/2018/036). The support provided by Fondecyt project 1201616 and CONICYT/FONDAP/1511001 is kindly acknowledged. ANID support through grant ANID/FONDAP/15110019 is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stability analysis of multi-terminal HVDC with diode rectifier connected off- shore wind power plants

  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] This paper addresses the detailed modeling and small-signal stability analysis of a multi-terminal high voltage direct current (HVDC) system including a large diode rectifier-connected off-shore wind power plant (WPP). The study covers both islanded and connected WPP operation with different control scenarios. Islanded WPP stands for non-conducting HVDC diode rectifier (DR) whereas in connected WPP operation the DR is conducting. The study of both modes is important as the WPP would be in one of these modes during normal operation. Variable off-shore ac-grid frequency and a dynamic diode rectifier model have been considered for adequate dynamic modeling. The proposed models have been validated against detailed PSCAD EMT simulations and have been used to carry out the small-signal stability analysis of the islanded and connected WPP with different scenarios. Moreover, the dynamic model is used to assess the system robustness against parametric uncertainties, communication delay and power level, ensuring the integration of the off-shore WPP into the on-shore electrical power system. This study also points out that adequate droop control of the HVDC grid has a larger impact on overall stability than the diode rectifier connected off-shore WPP controllers., This work was supported by the Spanish Ministry of Economy and EU FEDER Funds under grants DPI2014-53245-R, and DPI2017-84503-R. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 691714.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Impedance-based Stability Analysis for HVDC Diode-Rectifier Connected Off-shore Wind Farms

  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] This paper includes a stability study of a HVDC diode rectifier connected off-shore wind power plant. Usually, the internal control strategy of commercial wind turbines are not completely known, so stability studies based on transfer functions or eigenvalue analysis are of limited use. However, the frequency behaviour of both wind turbine grid side converters and HVDC diode rectifier station can be obtained without a detailed knowledge of the control internals of the wind turbines. This paper includes the validation of impedance-based stability analysis for HVDC diode-rectfier connected off-shore wind farms. The frequency dependent impedance of the wind turbine converters and of the diode rectifier HVDC station are developed both analytically from their respective analytical models and also by using signal injection. It is shown that the stability analysis using the identified impedance frequency response and that from analytic calculationlead the same results, thus validating the use of the impedance method for the stability analysis of grid-forming Diode-rectifier connected wind power plants., The authors would like to thank the support of the Spanish Ministry of Science, Innovation and Universities and EU FEDER funds under grant DPI2017-84503-R. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 691714.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Active/Reactive Power Control Strategy for Renewable Generation Systems

  • Andrade, Iván
  • Pena, Rubén
  • Riedemann, Javier
  • Jara, Werner
  • Pesce, Cristián
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] The development of distributed generation, mainly based on renewable energies, requires the design of control strategies to allow the regulation of electrical variables, such as power, voltage (V), and frequency (f), and the coordination of multiple generation units in microgrids or islanded systems. This paper presents a strategy to control the active and reactive power flow in the Point of Common Connection (PCC) of a renewable generation system operating in islanded mode. Voltage Source Converters (VSCs) are connected between individual generation units and the PCC to control the voltage and frequency. The voltage and frequency reference values are obtained from the P-V and Q-f droop characteristics curves, where P and Q are the active and reactive power supplied to the load, respectively. Proportional-Integral (PI) controllers process the voltage and frequency errors and set the reference currents (in the dq frame) to be imposed by each VSC. Simulation results considering high-power solar and wind generation systems are presented to validate the proposed control strategy., This research was funded by ANID/FONDAP/15110019, by ANID/FONDECYT/1201616, and by ANID/PIA/ACT192013. This work was also supported by the Spanish Ministry of Economy and EU FEDER Funds under grant DPI2017-84503-R. Project partially funded by the EU through the Comunitat Valenciana 2014-2020 European Regional Development Fund (FEDER) Operating Program (grant IDIFEDER/2018/036).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Embedded real-time simulators for electromechanical and power electronic systems using system-on-chip devices

  • Tormo, Daniel
  • Idkhajine, Laucine
  • Monmasson, Eric
  • Vidal-Albalate, Ricardo
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] This paper studies the suitability of System-on-Chip (SoC) devices to perform Embedded Real-Time Simulators (eRTS) of electrical systems. These new devices combine powerful ARM processors, a Field-Programmable Gate Array (FPGA) and other peripherals which make them very convenient for controlling, monitoring and emulating a complete electrical system. There are two main categories of elements with their own respective characteristics and constraints: electromechanical/electromagnetic systems, and switching elements. Accordingly, the proposed investigation will focus on a Doubly-Fed Induction Generator (DFIG) on one hand, and on a Modular Multi-level Converter (MMC) on the other hand. In addition to Real-Time (RT) simulation results, SoC time/resources evaluations will be presented for different implementation strategies: full-software, full-hardware based on High-Level Synthesis (HLS) tools, and using 64/32-bit floating- and fixed-point formats. The validity of the MMC implementation will be tested experimentally., The authors would like to thank Mr Miguel Albero and Mr Raul Morillas for their help on building up the test bench to obtain the experimental results. Also thank the support of the Spanish Ministry of Economy and EU FEDER Funds under grants DPI2014-53245-R and DPI2017-84503-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Protection Strategies for the Connection of Diode Rectifier-based Wind Power Plants to HVDC Interconnectors

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
  • Vidal-Albalate, Ricardo
[EN] The connection of diode rectifier (DR) based wind power plants to existing or planned High Voltage dc (HVdc) interconnectors can lead to important savings on cost and system robustness. Since the DR station usually operates in a bipolar configuration, its connection to symmetric monopoles is particularly challenging. However, there are no published detailed studies on the protection of DR connection wind power plants to symmetric monopole interconnectors or even to bipolar interconnectors. This paper includes the comparative study of five different protection strategies for such systems, including both solid and resistive DR station grounding and strategies with and without the use of dc-circuit breakers. An analytical study allows for the calculation of fault current during fault on-set for both half-bridge and hybrid Modular Multi-level Converter (MMC) stations. Using detailed Electromagnetic Transient (EMT) simulation studies, the different protection strategies are evaluated in terms of current, voltage and isolation requirements of each element, as well as the need for dc-circuit breakers, fast communication or larger surge arresters. Moreover, a distance fault detection algorithm is included for the wind turbine converters to distinguish between local ac-grid and dc-cable faults. From the simulation results it is possible to conclude that DR high impedance grounding, together with wind turbine distance protection can be used for the protection of DR based off-shore wind power plants connected to symmetric monopole interconnectors without requiring dc-circuit breakers., This work was supported in part by the Spanish Ministry of Economy and EU FEDER Funds under Grant DPI2017-84503-R, in part by the EU through the Comunitat Valenciana 2014-2020 European Regional Development Fund (FEDER) Operating Program under Grant IDIFEDER/2018/036, and in part by the European Union's Horizon 2020 Research and Innovation Program under Grant Agreement 691714.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sizing and Short-Circuit Capability of a Transformerless HVDC DC-DC Converter

  • Vidal-Albalate, Ricardo
  • Soto-Sánchez, Diego
  • Belenguer, Enrique
  • Peña, Rubén
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] This work aims at optimizing the converter design of the double-T MMC DC-DC converter in terms of transmitted power per submodule and also in terms of transmitted power per silicon area, while, at the same time, providing the capability to block dc faults. Firstly, the converter operation is described and the optimal values of the inner ac and dc voltages that minimize device power rating are derived. Next, the submodule topology is analyzed and a thorough study on the converter capability for blocking fault currents is carried out, showing that the converter is able to isolate dc faults both at the input and at the output of the converter. Finally, the previous analytical study is verified by means of detailed PSCAD simulations., This work was supported by Spanish Ministry of Economy and EU FEDER Funds under Grants DPI2014-53245-R and DPI2017-84503-R. This work was supported by the EU through the Comunitat Valenciana 2014-2020 European Regional Development Fund (FEDER) Operating Program under Grant IDIFEDER/2018/036. This work was supported by the Fondecyt project 1201616 and CONICYT/FONDAP/15110019 is kindly acknowledged.