Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the impact of environmental regulations on green technology innovation efficiency in the construction industry

  • Zhang, Jingxiao
  • Ouyang, You
  • Li, Hui
  • Philbin, Simon P.
  • Li, Zhaoling
  • Skitmore, Martin
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] In the current environmentally constrained context, deploying effective environmental regulations (ERs) to promote greener technologies is necessary. Green technology innovation efficiency (GTIE) reflects the efficiency of an industry¿s use of resources in the green technology innovation process. However, previous research has considered innovation as a black box regarding the potential contribution and diversity of ERs. In order to analyze the differential impacts of ERs on GTIE, this study classifies ERs into command-and-control, market-based and voluntary. By adopting China's 2000¿2017 construction industry as a case study, this study analyzes GTIE evolution based on a network Epsilon Based Measure (EBM) model and analyze the impacts of ERs by Tobit Regression. Findings suggest that: (1) There is a significant disconnection between the Research & Development (R&D) and commercial application stages of green technology in construction industry. The construction industry is able to turn most R&D achievements into profits at the commercialization stage, but a large amount of R&D investment does not produce R&D achievements. (2) Different types of ERs have different impacts on GTIE, but their intended outcomes can only be achieved by a suitable combination of them., This research is supported by the National Natural Science Foundation of China (No. 71301013); National Social Science Fund projects (No. 20BJY010); National Social Science Fund Post-financing projects (No. 19FJYB017); Humanity and Social Science Program Foundation of the Ministry of Education of China (No. 17YJA790091); Sichuan-tibet Railway Major Fundamental Science Problems Special Fund (No. 71942006); Qinghai Natural Science Foundation (No. 2020-JY-736); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (No. 2018-GH-006 and No. 2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No. E-GKRWJC20202914); Shaanxi Social Science Fund (No. 2017S004); Shaanxi Province Social Sciences Major Theoretical and Practical Research Fund (No. 2019Z191); Xi'an Construction Science and Technology Planning Project (No. SZJJ201915 and No. SZJJ201916); Xi'an Science Technology Bureau Fund (No. 201805070RK1SF4(6)); Shaanxi Universities Second Batch of Youth Outstanding Talents Support Projects (No. [2018]111); Shaanxi Province Higher Education Teaching Reform Project (No. 19BZ016); Education Funding of Master of Engineering Management in China (No. 2017-ZX-004); Special Fund for Graduate Student Education Reform of Central College, Chang'an University (No. 300103190413, No. 300103102352 and No. 300103190943); Fundamental Research for Education Reform of Central College, Chang'an University (No. 300104292305, No. 300104292304 and No. 300104292308); Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences), Chang'an University (No. 300102230612, No. 300102239616 and No. 300102230503); Fundamental Research for Funds for the Central Universities, Chang'an University (No. 300102238201). The third author also acknowledges the Spanish Ministries of Science, Innovation and Universities for his Ramon y Cajal contract (RYC2017-22222) co-funded by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Current and Future Trends of Resource Misallocation in the Construction Industry: A Bibliometric Review with Grounded Theory

  • Zhang, Jingxiao
  • Dong, Fangyu
  • Li, Hui
  • Skitmore, Martin
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] Resource misallocation (RM) refers to the existence of marginal output inequalities between different industries or companies in an economy. Prior studies of RM have mostly focused on effect analysis, construction industry structure upgrades, and organization management. However, these studies have been fragmented and unrelated. This paper analyzes the status quo, consequences, and emerging trends of RM research at the macroscopic level based on current problems and with the aim of exploring potential solutions. Drawing on grounded theory, a qualitative analysis using text-mining is used to analyze the characteristics of 124 RM-related papers. The results more comprehensively and systematically reveal that current RM research encompasses four major dimensions of sources and concepts, misallocation degree measurement and characterization, focused issues (field), and RM research deficiencies. Methods for measuring RM have also been developed from the simple proportional method to current mainstream methods (e.g., growth rate decomposition and variant substitution). We conclude that, in order for this discipline to thrive and effectively reduce RM, future research into RM should focus on core categories, especially the reform of market-oriented factors, transformation of government functions, construction industrial structure adjustment, and methods of income distribution. This systematic review provides a discipline oversight and uncovers necessary and potential research directions, This research is supported by the National Social Science Fund projects (No. 20BJY010); National Social Science Fund Post-financing projects (No. 19FJYB017); Sichuan-Tibet Railway Major Fundamental Science Problems Special Fund (No. 71942006); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (No. 2018-GH-006 and No. 2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No. E-GKRWJC20202914).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic Quality Monitoring System to Assess the Quality of Asphalt Concrete Pavement

  • Ma, Ziyuan
  • Zhang, Jingxiao
  • Philbin, Simon P.
  • Li, Hui
  • Yang, Jie
  • Feng, Yunlong
  • Skitmore, Martin
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] With the rapid development of new technologies, such as big data, the Internet of Things (IoT) and intelligent sensing, the traditional asphalt pavement construction quality evaluation method has been unable to meet the needs of road digital construction. At the same time, the development of such technologies enables a new management system for asphalt pavement construction. In this study, firstly, the dynamic quality monitoring system of asphalt concrete pavement is established by adopting the BeiDou Navigation Satellite System, intelligent sensing, the IoT and 5G technology. This allows key technical indicators to be collected and transmitted for the whole process of asphalt mixture, which includes the mixing plant, transport vehicle, paving and compaction. Secondly, combined with AHP and the entropy weight (EW) method, the index combination weight is calculated. The comprehensive index for the pavement digital construction quality index (PCQ) is proposed to reflect the impact of monitoring indicators on pavement quality. An expert decision-making model is formed by using the improved particle swarm optimization (PSO) algorithm coupled with radial basis function neural network (RBF). Finally, the digital monitoring index and pavement performance index are connected to establish a full-time and multi-dimensional digital construction quality evaluation model. This study is verified by a database created from the digital monitoring data of pavement construction collected from a highway construction project. The system proposed in this study can accurately reflect the quality of pavement digital construction and solve the lag problem existing in the feedback of construction site., This research is supported by the Branch of China Road and Bridge Corporation (Cambodia) Technology Development Project(No.2020-zlkj-04); National Social Science Fund projects (No.20BJY010); National Social Science Fund Post-financing projects (No.19FJYB017); Sichuan-tibet Railway Major Fundamental Science Problems Special Fund (No.71942006); Qinghai Natural Science Foundation (No.2020-JY-736); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (No.2018-GH-006 and No.2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No.E-GKRWJC20202914); Shaanxi Social Science Fund (No.2017S004); Xi'an Construction Science and Technology Planning Project (No.SZJJ201915 and No.SZJJ201916); Shaanxi Province Higher Education Teaching Reform Project (No.19BZ016); Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences), Chang'an University (No.300102239616, No.300102281669 and No.300102231641).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influencing factors of urban innovation and development: a grounded theory analysis

  • Zhang, Jing-Xiao
  • Cheng, Jia-Wei
  • Philbin, Simon Patrick
  • Skitmore, Martin
  • Wang, Ge
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] Urban innovation and development is a core driver for promoting the industrial, economic, and social development of cities. However, the factors that affect the innovation and development of cities lack systematic analysis as well as interaction analysis. Based on a multidimensional perspective, this study suggests that natural, economic, and social factors are three major factors conditioning urban innovation and development. A grounded theoretical qualitative method is further adopted to code relevant research literatures, news reports and interview materials, resulting in an onion factors model. We find that natural factors ¿ including environmental quality, geographic location, and city scale ¿ are prerequisite for conditioning urban innovation and development. Economic factors are also key, including economic level, industrial structure, industrial agglomeration, and technological innovation. Social factors are guarantee factors, including administrative hierarchy, cultural environment, population structure, and government management and services, i.e., they are essential for cities to become adaptable in the current dynamic situation. The study provides theoretical support and practical directions for the formulation of policies for urban innovation development., This research is supported by the National Social Science Fund projects (No.20BJY010);National Social Science Fund Post-financing projects (No.19FJYB017); Sichuan-tibet Railway Major Fundamental Science Problems Special Fund (No.71942006); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (No.2018GH-006 and No.2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No.E-GKRWJC20202914); Shaanxi Social Science Fund (No.2017S004); Xi'an Construction Science and Technology Planning Project (No.SZJJ201915 and No.SZJJ201916); Shaanxi Province Higher Education Teaching Reform Project (No.19BZ016); Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences), Chang'an University (No.300102230612).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Critical Duration Index: Anticipating Project Delays From Deterministic Schedule Information

  • González-Cruz, María-Carmen|||0000-0002-6987-5732
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
  • Lucko, Gunnar
  • Zhang, Jing-Xiao
[EN] Classical scheduling techniques are well-known to underestimate the average project duration, yet they remain widely used in practice due to their simplicity. In this paper, the new Critical Duration Index (CDI) is proposed. This index indirectly allows anticipation for the probability of a project ending late, as well as the average project duration extension compared with a deterministic project duration estimate. The accuracy of two simple regression expressions that use the CDI was tested on two representative data sets of 4,100 artificial and 108 empirical (real) projects. Results show that these regression expressions outperformed the only alternative index found in the literature. Besides allowing enhanced forecasting possibilities, calculating the CDI only requires basic scheduling information that is available at the planning stage. It can thus be easily adopted by project managers to improve their project duration estimates over prior deterministic techniques., This research is supported by the National Social Science Fund projects (No. 20BJY010); National Social Science Fund Post-Financing Projects (No. 19FJYB017); Sichuan-Tibet Railway Major Fundamental Science Problems Special Fund (No. 71942006); Qinghai Natural Science Foundation (No. 2020-JY-736); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (Nos. 2018-GH-006 and 2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No. E-GKRWJC20202914); Shaanxi Province Higher Education Teaching Reform Project (No. 19BZ016); and Humanities and Social Sciences Research Project of the Ministry of Education (21XJA752003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Data-Driven Platform Framework for Digital Whole-Process Expressway Construction Management

  • Chen, Shu-Yang
  • Zhang, Jing-Xiao
  • Ni, Qi-Chang
  • Skitmore, Martin
  • Ke, Yong-Jian
  • Zuo, Jian
  • Sun, Hao-Jie
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] To increase the speed and efficiency of expressways construction, information management is being gradually introduced into the construction process. However, progress is limited due to the complexity of expressway engineering and application limitations of information technology. Design and delivery are still dominated by paper files, and the management of test and inspection data is still relatively extensive. Research to date into digital expressway construction has been piecemeal and fragmented with a lack of research related to the whole construction process and a data-centric information management system yet to be realized. In response, through literature research and semi-structured interviews, the framework of a data-driven digital whole-process highway construction management platform was determined. A whole process management platform was established according to the framework, and the functional application of the proposed platform was explained through a case. The framework is proposed from the perspective of the whole process of collaborative sharing., which provides a new way of thinking to solve the problems existing in the current field of expressway construction whole-process management. It also provides data-centric management, electronic design and delivery, a refined workflow, and an efficient management process., This research was supported by the Branch of China Road and Bridge Corporation (Cambodia) Technology Development Project (No. 2020-zlkj-04), National Social Science Fund projects (No. 20BJY010), National Social Science Fund Post-financing projects (No. 19FJYB017), Sichuan-Tibet Railway Major Fundamental Science Problems Special Fund (No. 71942006), List of Key Science and Technology Projects in Chinas Transportation Industry in 2018-International Science and Technology Cooperation Project (No. 2018-GH-006 and No. 2019-MS5-100), Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No. E-GKRWJC20202914), Shaanxi Social Science Fund (No. 2017S004), and Xian Construction Science and Technology Planning Project (Nos. SZJJ201915 and SZJJ201916).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluating the impact of highway construction projects on landscape ecological risks in high altitude plateaus

  • Li, Chao
  • Zhang, Jingxiao
  • Philbin, Simon P.
  • Yang, Xu
  • Dong, Zhanfeng
  • Hong, Jingke
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] In China and other countries, many highway projects are built in extensive and high-altitude flat areas called plateaus. However, research on how the materialisation of these projects produce a series of ecological risks in the landscape is very limited. In this research, a landscape ecological risk analysis model for high-altitude plateaus is proposed. This model is based on the pattern of land uses of the surrounding area. Our study includes buffer analysis, spatial analysis, and geostatistical analysis. We apply the model to the Qumei to Gangba highway, a highway section located in the southeast city of Shigatse at the Chinese Tibet autonomous region. Through global and local spatial autocorrelation analysis, the spatial clustering distribution of ecological risks is also explored. Overall, our study reveals the spatial heterogeneity of ecological risks and how to better mitigate them. According to a comparison of the risk changes in two stages (before and after the highway construction), the impact of highway construction on the ecological environment can be comprehensively quantified. This research will be of interest to construction practitioners seeking to minimize the impact of highway construction projects on the ecological environment. It will also inform future empirical studies in the area of environmental engineering with potential affection to the landscape in high-altitude plateaus., This research is supported by the Branch of China Road and Bridge Corporation (Cambodia) Technology Development Project (No.2020-zlkj-04); National Social Science Fund Projects (No.20BJY010); National Social Science Fund Post-financing Projects (No.19FJYB017); Sichuan-Tibet Railway Major Fundamental Science Problems Special Fund (No.71942006); Qinghai Natural Science Foundation (No. 2020-JY-736); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (Nos. 2018-GH-006 and 2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No. E-GKRWJC20202914); Shaanxi Social Science Fund (No. 2017S004); Xi'an Construction Science and Technology Planning Project (Nos. SZJJ201915 and SZJJ201916); Shaanxi Province Higher Education Teaching Reform Project (No. 19BZ016); Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences), Chang'an University (Nos. 300102239616, 300102281669 and 300102231641).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmental life cycle impact assessment of transportation infrastructure: A multi-case study in international perspective

  • Zhang, Jingxiao
  • Peng, Xiaqing
  • Ouyang, You
  • Ke, Yong-Jian
  • Lu, Qingchang
  • Li, Hui
  • Skitmore, Martin
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] Although transportation infrastructure promotes the continuous development of the world economy, it is also responsible for serious pollution problems. These are studied in the analysis of five transportation infrastructure projects from Bosnia, Pakistan, and China, and their environmental emissions and impacts using an environmental impact assessment model of transportation infrastructure based on life cycle analysis. This shows that: (a) the main reason for the negative environmental impact of transportation infrastructure is the use of energy and complex materials, of which the use of lime soils has the biggest influence on global warming; and (b) frequent overhaul maintenance has a greater impact on the environment compared to daily maintenance. Our findings provide governments from all countries with a scientific basis for formulating policies for energy conservation and reduction in transportation infrastructure emissions., This research is supported by the National Social Science Fund projects(No.20BJY010); National Social Science Fund Post-financing projects(No.19FJYB017); Sichuan-tibet Railway Major Fundamental Science Problems Special Fund (No.71942006); Qinghai Natural Science Foundation(No.2020-JY-736); List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (No.2018-GH-006 and No.2019-MS5-100); Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No.E-GKRWJC20202914); Shaanxi Social Science Fund (No.2017S004); Xi'an Construction Science and Technology Planning Project (No.SZJJ201915 and No.SZJJ201916); Shaanxi Province Higher Education Teaching Reform Project (No.19BZ016); Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences), Chang'an University (No.300102239616, No.300102281669 and No.300102231641). The fourth author also acknowledges the Spanish Ministry of Science and Innovation for his Ramon y Cajal contract (RYC-2017-22222) co-funded by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new perspective to evaluate the antecedent path of adoption of digital technologies in major projects of construction industry: A case study in China

  • Zhang, Jingxiao
  • Zhang, Meirong
  • Philbin, Simon P.
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] The adoption of digital technologies is key to the digital transformation of the construction industry. However, the current adoption of digital technologies is limited. This study uses China as a case, combines the DOI and TOE theories to identify impact factors of the adoption of digital technologies in major projects. The configuration analysis is complemented with fuzzy-set qualitative comparative analysis. As a result, the study constructs the ¿TOE-D Technology Adoption Antecedent Framework¿, including 11 antecedents, and identifies three distinct configurations types, namely: ¿Needs-Resource-Collaboration¿; ¿Resource¿ under high competitive pressure; and ¿Resource¿ under low competitive pressure. Comparing the configurations horizontally, the core or edge characteristics of factor in configurations are analyzed. The results can help major projects in the construction industry to ascertain a combination of elements, which promote the adoption of digital technologies so that project practitioners can make targeted and precise adjustments to enable digital transformation of the construction industry., This research is supported by Sichuan Tibet Railway Major Fundamental Science Problems Special Fund (No.71942006) ; National Social Science Fund projects (No.20BJY010) ; List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project (No.2018-GH 006 and No.2019-MS5-100) ; Emerging Engineering Education Research and Practice Project of Ministry of Education of China (No.E-GKRWJC20202914) ; and Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences) (No.300102282601).