Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Transcriptomic and lipidomic analysis of the differential pathway contribution to the incorporation of erucic acid to triacylglycerol during Pennycress seed maturation

  • Claver, Ana
  • Luján, María Ángeles
  • Escuín, José Manuel
  • Schilling, Marion
  • Jouhet, Juliette
  • Savirón, María
  • López, M. Victoria
  • Picorel, Rafael
  • Jarne, Carmen
  • Cebolla, Vicente L.
  • Alfonso, Miguel
Thlaspi arvense (Pennycress) is an emerging feedstock for biofuel production because of its high seed oil content enriched in erucic acid. A transcriptomic and a lipidomic study were performed to analyze the dynamics of gene expression, glycerolipid content and acyl-group distribution during seed maturation. Genes involved in fatty acid biosynthesis were expressed at the early stages of seed maturation. Genes encoding enzymes of the Kennedy pathway like diacylglycerol acyltransferase1 (TaDGAT1), lysophosphatidic acid acyltransferase (TaLPAT) or glycerol 3-phosphate acyltransferase (TaGPAT) increased their expression with maturation, coinciding with the increase in triacylglycerol species containing 22:1. Positional analysis showed that the most abundant triacylglycerol species contained 18:2 at sn-2 position in all maturation stages, suggesting no specificity of the lysophosphatidic acid acyltransferase for very long chain fatty acids. Diacylglycerol acyltransferase2 (TaDGAT2) mRNA was more abundant at the initial maturation stages, coincident with the rapid incorporation of 22:1 to triacylglycerol, suggesting a coordination between Diacylglycerol acyltransferase enzymes for triacylglycerol biosynthesis. Genes encoding the phospholipid-diacylglycerol acyltransferase (TaPDAT1), lysophosphatidylcholine acyltransferase (TaLPCAT) or phosphatidylcholine diacylglycerolcholine phosphotransferase (TaPDCT), involved in acyl-editing or phosphatidyl-choline (PC)-derived diacylglycerol (DAG) biosynthesis showed also higher expression at the early maturation stages, coinciding with a higher proportion of triacylglycerol containing C18 fatty acids. These results suggested a higher contribution of these two pathways at the early stages of seed maturation. Lipidomic analysis of the content and acyl-group distribution of diacylglycerol and phosphatidyl-choline pools was compatible with the acyl content in triacylglycerol at the different maturation stages. Our data point to a model in which a strong temporal coordination between pathways and isoforms in each pathway, both at the expression and acyl-group incorporation, contribute to high erucic triacylglycerol accumulation in Pennycress.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Colorimetric enzymatic rapid test for the determination of atropine in baby food using a smartphone

  • Domínguez, M.
  • Moraru, D.
  • Lasso, S.
  • Sanz-Vicente, I.
  • Marcos, S. de
  • Galbán, J.
A method for the enzymatic determination of atropine has been developed, which is based on a sequence of reactions involving (1) the hydrolysis of atropine to give tropine; (2) the enzymatic oxidation of tropine with NAD (catalysed by tropinone reductase); and (3) an indicator reaction, in which the NADH previously formed reduces the dye iodonitrotetrazolium chloride (INT) to a reddish species, the reaction catalysed by diaphorase. The method was first developed in solution (linear response range from 2.4 × 10−6 M to 1.0 × 10−4 M). It was then implemented in cellulose platforms to develop a rapid test where the determination is made by measuring the RGB coordinates of the platforms using a smartphone-based device. The device is based on the integrating sphere concept and contains a light source to avoid external illumination effects. The smartphone is controlled by an app that allows a calibration line to be generated and the atropine concentration to be quantified; moreover, since the app normalizes the CCD response of the smartphone, the results and calibrations obtained with different smartphones are similar and can be shared. Using the G coordinate, the results were shown to have a linear response with the concentration of atropine ranging from 1.2 × 10−5 M to 3.0 × 10−4 M with an RSD of 1.4% (n = 5). The method has been applied to the determination of atropine in baby food and buckwheat samples with good results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Anti-corrosion peptide coatings and laser patterning for application on flexible transparent silver nanowire electrodes

  • Seral-Ascaso, Andrés
  • Lahoz, Ruth
  • Tripathi, Manoj
  • Elídóttir, Katrín L.
  • Cebolla, Vicente L.
  • Jurewicz, Izabela
  • Dalton, Alan B.
  • Garriga, Rosa
  • Muñoz, Edgar
This work describes physicochemical processing strategies to allow the efficient use of oligoglycine-based coatings for corrosion protection of transparent silver nanowire (AgNW) electrodes fabricated on flexible polyethylene terephthalate (PET) substrates. The peptide anti-corrosion coatings consist of two-dimensional amino-terminated oligoglycine peptide assemblies, denoted as tectomers. Tectomer sheets are hydrophobic in nature and act as moisture barrier and protective layer preventing oxidation and degradation of the nanowires when exposed to atmospheric conditions. Moreover, tectomer coatings markedly decrease the AgNW electrode sheet resistance (Rs) by mechanical squeezing of wire-to-wire junctions in the network. Enhanced adhesion of the tectomer coatings to PET was achieved by a simple hydrolysis process that generates carboxyl and hydroxyl groups on the plastic substrate, enabling a strong interaction with the amino groups on the tectomer surface. Rs values as low as 29.3 Ω/sq with 94.4 % T were achieved for tectomer-coated AgNW electrodes, which are competitive with commercially available AgNW and ITO electrodes. Finally, peptide-coated AgNW networks on PET substrates were efficiently patterned by a one-step laser ablation process without damaging the substrate, offering promise for their use as components in flexible optoelectronics and touchscreen technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sizing-up the aromatic system of a Cyclometalated n-Heterocyclic Carbene in a luminescent platinum-based sensor to xanthine

  • Melendo, Irene
  • Camacho-Aguayo, Javier
  • Fuertes, Sara
  • Martín, Antonio
  • Marcos, Susana de
  • Galbán, Javier
  • Sicilia, Violeta
A cyclometalated N-heterocyclic carbene platinum(II) complex comprising a phenanthrenyl moiety has been prepared and used to synthesize neutral and cationic luminescent complexes containing different ancillary ligands: [Pt(PhenˆC*)(acac)] (5), [Pt(PhenˆC*)(CNXyl)2]PF6 (6) and [Pt(PhenˆC*)(PˆP)]PF6 (PˆP: 1,1-bis(diphenylphosphino)methane, dppm 7; 1,2-bis(diphenylphosphino)ethane, dppe, 8, 1,2-bis(diphenylphosphino)benzene, dppbz, 9). Structural characterization by NMR and single-crystal X-ray studies endorsed the proposed molecular structure for these complexes with the formation of a six-membered platinacycle. Photophysical and computational studies for 5-9 disclosed the ligand-centered nature of the triplet state, mainly governed by the extended aromatic system of the PhenˆC* ligand. Immobilized in ethyl cellulose (EC) films, compound 5 shows elevated quantum yield and long decay times in argon atmosphere and high sensitivity to molecular oxygen. Blends of 5 and EC (C5) were tested as a luminescent oxygen probe for the determination of xanthine (Xn), showing good photo stability and reversibility. The RSD is 0.9% (n=3) for 3·10-4 M and the detection limit achieves values of ∼ 2·10-5 M. This platinum-based sensor delivers better results than the ones obtained with [Ru(bpy)3]Cl2·6 H2O, a typical luminophore used in commercial oxygen sensors. To improve the feasibility of the Xn determination, the sensor was implemented in a smartphone adapted device to be used as a in-situ Xn control.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

NADPH-mediated seedless in situ formation of gold or gold-platinum nanoparticles for the enzymatic determination of atropine

  • Domínguez, Mario
  • Marcos, Susana de
  • Galbán, Javier
The without-seeds in situ formation of gold nanoparticles from NADPH and its application to the colorimetric determination of atropine (a tropane alkaloid) in cereals is reported. The method is based on a chemical hydrolysis, followed by an enzymatic oxidation by NADP catalyzed by tropinone reductase in the presence of Au(III) or Au(III)/Pt(II). During this reaction, the formed NADPH reduces the metal ion precursor to AuNPs (or AuPtNPs) and the absorption due to the plasmon band (550 nm or 575 nm) is measured. The method (AuPtNPs) allows the determination of the analyte in the concentration range 0.025 to 0.09 mM with an RSD of 3% (n = 5) and is applied to its determination in spiked buckwheat samples using the standard addition method, with 96.9 ± 2.0% recovery. It is also demonstrated that NAD(P)H and NADH have different kinetics for AuNP generation, which could be used to discriminate between these two cofactors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In situ Metal-Enhanced Fluorescence of gold nanoclusters for enzymatic biosensors

  • Camacho-Aguayo, Javier
  • Navarro Dominguez, Jesús
  • Lambea, Daniel
  • Felices, Carlos
  • Marcos Ruiz, Susana de
  • Galbán, Javier
A fluorescent enzymatic biosensor based on the in-situ observation of the MEF (Metal- Enhanced Fluorescence) effect has been developed for the first time. It has been demonstrated that during the enzymatic reaction of cadaverine with Diamine Oxidase (DAO) (used as proof of concept) in the presence of Au (III), the product can reduce the gold precursor to form AuNPs. When the reaction takes place in the presence of silica-coated gold nanoclusters (AuNCs@Si), an increase in the fluorescence signal is observed, which can also be related to the concentration of cadaverine. To understand the mechanism, the interaction between the AuNCs@Si and the enzymatic reaction, as well as their interaction with Au (III), has been studied. Under optimal conditions, the method shows a linear response range up to 250 μM Cadaverine, a limit of quantification of 52 μM and a limit of detection of 16 μM, which is about two orders of magnitude lower than the method without MEF (DAO/cadaverine/Au (III). It has been applied to the determination of cadaverine in spiked oily fish with a recovery of 95 ± 8 % (n = 3) and no significant differences (P = 0.05) were observed compared to a reference method. This MEF effect was also observed for the enzymatic determination of both xanthine with xanthine oxidase and tyramine with tyramine oxidase.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Kinetic and analytical characterization of a new tropinone oxidase enzyme and its application to the simultaneous determination of the tropane alkaloids atropine and scopolamine

  • Domínguez, Mario
  • Marcos, Susana de
  • Galbán, Javier
A spectrophotometric enzymatic method for the determination of atropine (Atp) and scopolamine (Scp), two tropane alkaloids (TAs), has been developed. The method is based on a previous basic hydrolysis to tropine (Trp) and scopine (Sci) respectively, and a subsequent enzymatic oxidation catalyzed by a tropinone reductase 1 (TRase) using NAD as oxidant; the absorbance of NADH (340 nm) is monitored during the reaction. First, the enzyme kinetics of both substrates are studied; it is concluded that both TAs follow a compulsory order ternary complex mechanism and the Michalis-Menten constant is calculated. Then, an enzymatic method was optimized for Atp, allowing the determination of this substrate in the range from 1.1·10−5 M to 3.0·10−4 M (LoD = 3.5·10−6 M); it was applied to the determination of Atp in a spiked chia sample (96 ± 6% recovery). Interestingly, the equilibrium constant of the reaction decreased with temperature and increased with enzyme concentration; both effects were satisfactorily explained. A similar analytical study was carried out with Scp (linear range from 1.2·10−5 M to 3.0·10−4 M, LoD = 3.6·10−6 M); the method was also applied to Scp in a spiked chia sample (94 ± 2% recovery). Finally, since the kinetics of Scp is slower than that of Atp, the simultaneous quantitative determination of both compounds was successfully developed by measuring the absorbance at two reaction times (70 s and 300 s). This method was applied to the simultaneous determination of both TAs first in a synthetic sample and later in a spiked chia sample, with recoveries around 98% for both compounds. Although the sensitivity of the method is lower than that of the immunoassays for Atp, it has advantages such as the simultaneous determination of Atp and Scp, and even the possible determination of Trp (another TA).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

DUNI: A Portable Smartphone-Coupled Integrating Sphere for Controlled Illumination and Reliable Colorimetric Sensing: Analytical Applications

  • Cebrián, Pablo
  • Escuín, José Manuel
  • Salafranca, Jesús
  • Jarne, Carmen
  • López-Molinero, Ángel
  • Marcos, Susana de
  • Galbán, Javier
  • Sanz-Vicente, Isabel
The use of smartphones as analytical instruments is becoming increasingly widespread due to their ease of use and low cost. However, it has limitations, such as dependence on the smartphone’s sensor, the light source and the environment, which hinders the reproducibility and comparability of results. This paper presents the development of a portable device, called DUNI, which can be attached to any smartphone and is designed to overcome these limitations. The device, manufactured using 3D printing and with an average cost of €35, consists of an integrating sphere, which incorporates a lighting-electronic system, as well as accessories for measuring on different surfaces. It has been optimised by evaluating the influence of the optical geometry, the size and reflective coating of the sphere, the lighting conditions, and the electronic stability on measurement performance. It has been applied to the determination of hydrogen peroxide and biogenic amines in synthetic samples, achieving relative errors of less than 5% and detection limits between 3 and 6 µM. Overall, the device we have developed constitutes a portable, versatile and low-cost platform that enables quantitative colorimetric measurements using smartphones under controlled lighting conditions, with potential applications in on-site analysis and resource-limited settings.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermally annealed MoS2 nanosheets for highly sensitive NO2 detection: Role of vacancies and heterojunctions

  • Sayago, Isabel
  • Santos, José Pedro
  • Sánchez-Vicente, Carlos
  • Ogilvie, Sean P.
  • Dalton, Alan B.
  • Muñoz, Edgar
  • Garriga, Rosa
This work describes the facile, cost-effective fabrication of MoS2-based resistive sensors for low concentration detection of NO2. The sensitive layer consists of films of liquid-phase exfoliated MoS2 nanosheets in aqueous medium deposited by drop-casting onto micromachined silicon substrates with integrated heaters. Thermal treatment of MoS2 conducted during sensor preparation generates high density of S vacancies and induces partial oxidation to non-stoichiometric MoO3-x, resulting in the formation of both S vacancies in MoS2 and O vacancies in the oxide phase. Vacancies act as high-energy binding sites for NO2 and facilitate charge transfer, which enhances the NO2 sensing performance. In addition, the MoS2/MoO3-x heterojunctions formed lead to amplified change in conductivity upon NO2 adsorption, thereby enhancing the overall sensing response. Precise control of oxidation is a key issue, since excessive oxidation may both passivate vacancy sites and decrease the electrical conductivity of the sensing layer through the formation of less conductive oxide phase. The facile fabrication method reported here provided competitive sensor performance: NO2 concentration as low as 0.5 ppm was measured at 200 °C, and 0.25 ppm at 300 °C. Additionally, these sensors showed remarkable selectivity to NO2 with negligible responses to interfering gases (acetone, ethanol and CO). The effect of humidity on sensor response was studied, and it was found that 50% RH humidity significantly enhances the sensing response to NO2. The incorporation of carbon nanotubes to the sensing layers resulted in a faster and higher response to NO2. Detection mechanisms involved are discussed here.