Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuned flexibility with phenethyl esters plasticized polylactic acid

  • Gazquez-Navarro, Jose Javier
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] This study explores improving polylactic acid (PLA) by incorporating phenethyl-based plasticizers. PLA is a biobased polymer that tends to be rigid and has limited flexibility. To address this, 20¿wt% phenethyl esters were added through extrusion and injection molding. These esters are formed by esterifying carboxylic acids of various chain lengths with phenol, and both reactants can be sourced from nature, making this a sustainable approach. Including phenethyl plasticizers greatly increased PLA¿s elongation at break from 3.4¿% to over 130¿%, though tensile strength fell from 70.5¿MPa to between 20 and 25¿MPa. This change was evident in the fracture surfaces, which showed signs of plastic deformation. Thermal and thermomechanical tests revealed a lower glass transition temperature, improving chain mobility and allowing PLA to become ductile at room temperature. Although initial thermal degradation began at a lower temperature, the maximum degradation temperature rose slightly, suggesting enhanced thermal stability due to possible antioxidant effects of the plasticizers. Regarding shape memory, phenethyl plasticizers improved the recovery rate of the samples, expanding potential applications. Overall, these findings demonstrate the effectiveness of phenethyl-based plasticizers in improving PLA¿s flexibility and shape memory behavior, making it a more versatile material., This research is a part of the grant PID2023 152869OB-C22, and the grant TED2021 131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Juan Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Franco Dominici, Debora Puglia and Luigi Torre acknowledge University of Perugia and MUR for support within the project Vitality. This work has been funded by the European Union─NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041─VITALITY. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Raw Earth Construction and Restoration Technique: Experimental Protocol and Interventions in the Historic Village of Al Jazeera Al Hamra (United Arab Emirates)

  • Liberotti, Riccardo
  • Amer, Valeria
  • Gusella, Vittorio
[EN] The evolving relationship between contemporary practice and inherited structures necessitates sustainablestrategies for the preservation and reinforcement of heritage assets, safeguarding their functionality overtime. This study investigates the mechanical properties of traditional and innovative mortar-basedmaterials for the repair of architectural elements, with a particular focus on artistic stuccoes anddecorative features. The research aims to reduce their vulnerability to environmental, seismic, andanthropogenic factors, including pollution and climate change, which accelerate material degradationand ageing. The mix designs of artificial stone materials appropriate for the proposed strategies make useof natural rocks (e.g., limestone, alabastrine gypsum) and different constituents (e.g., vegetable sisalfibres, siliceous/siliceous-aluminous pozzolana); innovative raw earth-based mortars are also studied forplastering, rendering and repair of earthen buildings. In particular, a minimum of three specimens foreach mix design will be tested through flexural mechanical tests in an undergoing phase of the researchand using a displacement-controlled testing machine, following a standardised protocol –scientificallyrecognised at an European level– specifically developed for mortars (elements that exhibit material affinitywith the interventions addressed in this study). The results will then be comparatively assessed,considering not only the structural performance but also the material compatibility for potential fieldapplications. Finally, with reference to a case study, a design approach is presented allowing forinterventions on existing structures and the creation of new architectural shapes in an intimate, seamlessdialogue: emblematic –following the example of San Francesco di Assisi– of an essentiality able ofcommunicate with clarity and power., The research was partially supported by the projects “Centro Internazionale per la ricerca sulle Scienze e Tecniche della Ricostruzione fisica, economica e sociale–STRIC”, Project FISR 2019: “Eco Earth” (code 00245) and the PRIN 2022 project “Composite and Bio-Inspired material Design for Engineering Applications” COB IDEA (code 2022MF4JR). This work has been funded by the European Union– NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041 VITALITY CUP J97G22000170005.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

FloBP: a model-driven approach for developing and executing IoT-enhanced business processes

  • Fedeli, Arianna
  • Fornari, Fabrizio
  • Polini, Andrea
  • Re, Barbara
  • Torres Bosch, Maria Victoria|||0000-0002-2039-2174
  • Valderas, Pedro|||0000-0002-4156-0675
[EN] The capability to integrate Internet of Things (IoT) technologies into business processes (BPs) has emerged as a transformative paradigm, offering unprecedented opportunities for organisations to enhance their operational efficiency and productivity. Interacting with the physical world and leveraging real-world data to make more informed business decisions is of greatest interest, and the idea of IoT-enhanced BPs promises to automate and improve business activities and permit them to adapt to the physical environment of execution. Nonetheless, combining these two domains is challenging, and it requires new modelling methods that do not increase notation complexity and provide independent execution between the process and the underlying device technology. In this work, we propose FloBP, a model-driven engineering approach separating concerns between the IoT and BPs, providing a structured and systematic approach to modelling and executing IoT-enhanced BPs. Applying the separation of concerns through an interdisciplinary team is needed to ensure that the approach covers all necessary process aspects, including technological and modelling ones. The FloBP approach is based on modelling tools and a microservices architecture to deploy BPMN models, and it facilitates integration with the physical world, providing flexibility to support multiple IoT device technologies and their evolution. A smart canteen scenario describes and evaluates the approach's feasibility and its possible adoption by various stakeholders. The performed evaluation concludes that the application of FloBP facilitates the modelling and development of IoT-enhanced BPs by sharing and reusing knowledge among IoT and BP experts., The research underlying this paper has been partially supported by the PNRR MUR Project ECS_00000041-VITALITY. Also, this work is part of the RDI Project PID2020-114480RB-I00 funded by MCIN/AEI/1013039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Protamine sequence determines species-specific nuclear shape and histone retention

  • Czernik, Marta
  • Palazzese, Luca
  • Winiarczyk, Dawid
  • Iuso, Domenico
  • Khochbin, Saadi
  • Fulka, Josef
  • Fulka, Helena
  • Villafranca, Rocío
  • Rielo, Juan Antonio
  • Sánchez-Rodríguez, Ana
  • Latorre, Nerea
  • Agudo-Rios, Clara
  • Roldan, Eduardo R. S.
  • Teves, Maria Eugenia
  • Loi, Pasqualino
The nuclear shape observed after the forced expression of mouse or human protamine 1 (PRM1) in fibroblasts led us to propose the hypothesis that the PRM1 sequence plays an important role in imposing the overall shape of the protaminized nucleus. Comparison of mouse and human PRM1 sequences pointed to cysteines 15 and 29 as potential critical residues in the mouse PRM1 sequence, inducing the characteristic mouse “hooked” nuclear sperm shape. To explore this idea, mice with mutations in PRM1 Cys15 and Cys29 were generated. These mice remained fertile with no significant changes in sperm count or protamine expression levels. However, modifications in sperm head shape were observed. Transmission electron microscopy revealed disrupted chromatin condensation in mutant sperm, with several morphological changes and a remarkable increase in histone retention. Overall, the findings suggest that species-specific PRM1 cysteine residue positions are crucial for nuclear shape determination and histone retention in spermatozoa., European Union; National Science Centre (Poland); Italian Ministry of University and Research; Agencia Estatal de Investigación (España); Ministerio de Ciencia, Innovación y Universidades (España); National Institutes of Health (US); University of Teramo