Skip to main content

METODOS LES PARA LA SIMULACION DE CHORROS MULTIFASICOS

ENE2010-18542

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diesel spray CFD simulations based on the sigma-Y eulerian atomization model

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel
  • Pandal Blanco, Adrián
  • Trask, N.
  • Baldwin, E.
  • Schmidt, D.P.
[EN] This work presents an implementation and evaluation of the Sigma-Y atomization model for Diesel spray CFD simulations. The Sigma-Y model is based on an Eulerian representation of the spray atomization and dispersion by means of a single-fluid variable density turbulent flow within a RANS framework. The locally homogeneous flow approach has been applied in order to develop a spray vaporization model based on state relationships. A finite-volume solver for model equations has been created using the OpenFOAM CFD open-source C++ library. Model predictions have been compared to experimental data from free Diesel sprays under nonvaporizing and vaporizing conditions. High-speed imaging, PDPA, and Rayleigh-scattering measurements have been used in order to assess the CFD model. Accurate predictions of liquid and vapor spray penetration, as well as axial velocity and mixture fraction profiles, can be simultaneously achieved for a wide range of injection pressure and ambient conditions, despite only having qualitatively correct predictions of droplet size. The success of these predictions supports the mixing-limited vaporization hypothesis. Model accuracy is better for high ambient density and injection pressure conditions. It is proposed that under low ambient density and injection pressure conditions, interfacial dynamics become more important and the single velocity field assumption is less appropriate., This work was partially funded by the Spanish Ministry of Education and Science in the frame of the ENE2010-18542 project. The authors acknowledge support from the Army Research Office under grant no. W911NF-08-1-0171.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A large-eddy simulation of diesel-like gas jets

  • Hoyas, Sergio|||0000-0002-8458-7288
  • Gil, A.|||0000-0001-7192-6992
  • Mompó Laborda, Juan Manuel
  • Khuong ., Anh Dung
[EN] Some aspects of the transient evolution of diesel-like gas jets by means of large-eddy simulation (LES) are discussed in this work. In order to understand the relationship between the inlet boundary condition and the development of the turbulent motions of the diesel sprays, a 3D injection chamber is simulated. The main assumption of the setup is the turbulent gas jet theory hypothesis applied to the inlet boundary conditions. Validation of the results is achieved by comparing with both experimental diesel spray measurements and trusted Reynolds-averaged Navier-Stokes (RANS) simulations. Results show that reasonable simulation of turbulent patterns from one diameter distant from the inlet boundary condition is achieved. Copyright © 2011 Inderscience Enterprises Ltd., This research has been funded by the Spanish Government in the frame of the Project ‘Métodos LES para la simulación de chorros multifásicos’, Ref. ENE2010-18542. The authors also acknowledge the financial support of the Universidad Politécnica de Valencia under the contract Reference PAID-2759 and the Generalitat Valenciana, under the contract GV/2010/039. We are also grateful to Dr. Franciso Javier Salvador and Dr. José Manuel Pastor for providing experimental data and fruitful advices. In addition, we gratefully acknowledge helpful discussions with many researchers in CMT-Motóres Térmicos, especially Ms. Palma González and Ms. Mariany Chávez.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Schlieren Methodology for the Analysis of Transient Diesel Flame Evolution

  • Pastor, José V.|||0000-0003-4113-4681
  • Payri, Raul|||0000-0001-7428-5510
  • García-Oliver, José M|||0000-0002-2676-9681
  • Briceño Sánchez, Francisco Javier
[EN] Schlieren/shadowgraphy has been adopted in the combustion research as a standard technique for tip penetration analysis of sprays under diesel-like engine conditions. When dealing with schlieren images of reacting sprays, the combustion process and the subsequent light emission from the soot within the flame have revealed both limitations as well as considerations that deserve further investigation. Seeking for answers to such concerns, the current work reports an experimental study with this imaging technique where, besides spatial filtering at the Fourier plane, both short exposure time and chromatic filtering were performed to improve the resulting schlieren image, as well as the reliability of the subsequent tip penetration measurement. The proposed methodology has reduced uncertainties caused by artificial pixel saturation (blooming). Additionally, an algorithm to calculate Lift-off length from schlieren images has been developed and compared to the more conventional OH* imaging technique. By means of the improved setup, the analysis of transient diesel flame has been performed throughout the ignition and early combustion phases. When compared to a non-reacting vaporizing spray, the temporal evolution of the reacting case departs from the inert one at the start of combustion, when expansion in both axial (i.e. spray tip increase) and radial direction are observed. After that, the tip penetration progressively decreases on a clear transient period where the flow tries to re-organize itself in response to the induced reaction zone. Eventually, the spray undergoes an acceleration period where the reacting spray tip progresses above the non-reacting one. A parametric study has been conducted for three injection pressure levels to investigate the influence of this parameter upon transient flame evolution., This work was partially funded by the Spanish Ministry of Education and Science through the “LES METHODS FOR THE SIMULATION OF MULTIPHASE SPRAYS” project (ENE2010-18542). Mr. Francisco J. Briceño wishes to acknowledge financial support through a PhD studies grant (AP2008-02231) also sponsored by the Spanish Ministry of Education and Science
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A recent eulerian langrarian CFD methodology for modeling direct injection diesel sprays

  • Desantes J.M.|||0000-0002-4124-9393
  • Hoyas, Sergio|||0000-0002-8458-7288
  • Gil, A.|||0000-0001-7192-6992
  • Khuong, Anh Dung
  • Ravet, Frederic
[EN] The global objective of this work is to show the capabilities of the Eulerian Lagrangian spray atomization (ELSA) model for the simulation of Diesel sprays in cold starting con- ditions. Our main topic is to focus in the analysis of spray formation and its evolution ◦at low temperature 255 K (−18 C) and nonevaporative conditions. Spray behavior and several macroscopic properties, included the liquid spray penetration, and cone angle are also characterized. This study has been carried out using different ambient temper- ature and chamber pressure conditions. Additionally, the variations of several technical quantities, as the area coefficient and effective diameter are also studied. The results are compared with the latest experimental results in this field obtained in our institute. In the meantime, we also compare with the normal ambient temperature at 298 K (25◦ C) where the numerical validation of the model has shown a good agreement., In this article, KAD did all the simulations, analyze the results coming from them, and wrote the first version of the manuscript under the direct supervision of SH. JMD, AG and FR gave continuous advice during the work and collaborated in the final form of the manuscript. This work was supported in part by the Spanish Government in the frame of the Project `Metodos LES para la simulacion de chorros multifasicos, Ref. ENE2010-18542 and by Renault. Dung Khuong-Anh has been supported in part by the VECOM (Vehicle Concept Modeling), EU FP7 Marie Curie Initial Training Network (ITN) Grant Agreement 213543 and in conjunction with Renault SA, France.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A sparse mesh for Compact Finite Difference Fourier solvers with radius-dependent spectral resolution in circular domains

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Hoyas, Sergio|||0000-0002-8458-7288
  • Gil, A.|||0000-0001-7192-6992
  • García Galache, José Pedro
This paper presents a new method for the resolution of elliptic and parabolic equations in circular domains. It can be trivially extended to cylindrical domains. The algorithm uses a mixed Fourier-Compact Finite Difference method. The main advantage of the method is achieved by a new concept of mesh. The topology of the new grid keeps constant the aspect ratio of the cells, avoiding the typical clustering for radial structured meshes at the center. The reduction of the number of nodes has as a consequence the reduction in memory consumption. In the case of fluid mechanics problems, this technique also increases the time step for a constant Courant number. Several examples are given in the paper which show the potential of the method. (C) 2014 Elsevier Ltd. All rights reserved, This work was supported by the Spanish Government in the frame of the Project "Metodos LES para la simulacion de chorros multifasicos", grant ENE2010-18542. We also are very grateful to one of the referees for his/her work.