Skip to main content

SIMULACION NUMERICA Y VALIDACION EXPERIMENTAL DE FENOMENOS DE CAMBIO DE FASE LIQUIDO-VAPOR. APLICACION A SISTEMAS Y EQUIPOS TERMICOS (II)

ENE2011-28699

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A new thermocline-PCM thermal storage concept for CSP plants. Numerical analysis and perspectives

  • Galione Klot, Pedro Andrés
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
Thermocline storage concept has been considered for more than a decade as a possible solution to reduce the huge cost of the storage system in CSP plants. However, one of the drawbacks of this concept is the decrease in its performance throughout the time. The objective of this paper is to present a new thermocline-PCM storage concept which aims at circumventing this issue. The concept proposed is built of different solid filler materials and encapsulated PCMs combined into a multi-layer storage tank with molten salt as heat transfer fluid. The performance evaluation of each of the prototypes proposed is virtually tested by means of a detailed numerical methodology which considers the heat transfer and fluid dynamics phenomena present in these devices. The virtual tests carried out are designed so as to take into account several charging and discharging cycles until equilibrium is achieved, i.e. the same amount of energy stored in the charging phase is delivered in the discharge. As a result, the dependence of the storage capacity on the PCMs temperatures, the total energy stored/released, as well as the efficiencies of the storing process have been compared for the different thermocline, PCM-only and multi-layered thermocline-PCM configurations. Based on this analysis the selection of the best option for a given case/plant is proposed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Parametric study of two-tank TES systems for CSP plants

  • Torras Ortiz, Santiago|||0000-0001-5014-7383
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The two-tank thermal energy storage (TES) system is the most used technology for storage in concentrating solar power (CSP) plants. This work focuses on a parametric study, which aims to identify the most important parameters on TES system, in order to improve the design and increase the performance of the plant. Three parameters have been considered: meteorological data, insulation thickness of the storage tank, and configuration of the foundation of the storage tank. The effect of each parameter is evaluated using numerical simulations based on a modular object-oriented methodology. The main issues related to the mathematical models and its numerical methodology are also presented in this paper., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A free surface model for the numerical simulation of oscillating water column systems

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Castro González, Jesús|||0000-0002-8943-2402
The aim of this work is to propose and validate a numerical model that represents the hydrodynamic behavior of an Oscillating Water Column (OWC) device, that has been shown to be one of the most promising ways to extract energy from ocean waves: successful demonstrative set-up have been realized both on shore based structures (LIMPET device in Scotland and PICO plant in Azores) and on anchored floating ones (OE Buoy in Ireland) [1]. A Level Set scheme was employed to track the free moving interface in an incompressible, transient two-phase flow, globally governed by the Navier-Stokes and the mass conservation equations. After being validated, the model was used to investigate the interaction of linear waves with a submerged air chamber; several set-up were analyzed by monitoring the characteristics magnitudes, in order to assess the accuracy of the model and to optimize the hydrodynamic efficiency of the device. In the second part, a single phase Level Set method was developed and used to simulate the same problem., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A level-set aided single-phase model for the numerical simulation of free-surface flow on unstructured meshes

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Oliva Llena, Asensio|||0000-0002-2805-4794
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A new single-phase scheme for the numerical simulation of free-surface problems on 3-D unstructured meshes is presented. The flow field is obtained from the discrete solution of the incompressible Navier-Stokes equations, whereas a conservative level-set method is employed to capture fluid interfaces on an Eulerian approach. The scheme is based on a novel treatment of the interface for the deactivation of the light phase, allowing an optimization of the classic two-phase model for the cases in which the influence of the lighter phase is negligible. The deactivation is performed by directly imposing the appropriate pressure at the surface boundary, and, unlike similar approaches, without the need to treat near-interface velocities. The method is validated against various analytical and experimental references, demonstrating its potential on both hexahedral and unstructured meshes. Moreover, it shows higher numerical stability in comparison to two-phase solvers, as well as significant advantages in terms of computational performance., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Preliminary evaluation of a pre-industrial air-cooled LiBr-H2O small capacity absorption machine

  • Farnós Baulenas, Joan|||0000-0003-4749-5138
  • Castro González, Jesús|||0000-0002-8943-2402
  • Morales Ruíz, Sergio|||0000-0002-4767-6206
  • García Rivera, Eduardo
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The paper describes the thermal design, and evaluates the preliminary operational results of a small capacity pre-industrial LiBr-H2O air-cooled absorption machine in order to validate a numerical model and apply it to simulate a new 7kW LiBr-H2O air-cooled absorption chiller, conceived for low temperature driven, solar cooling or wasted heat. This numerical model is able to simulate the dynamical thermohydraulic behavior of a single-effect absorption machine in transient conditions, being implemented using a NEST platform (object-oriented numerical tool). The analysis of the absorption machine interaction with the other components of a solar cooling facility is also enhanced. Numerical results are obtained and the validation tested. From the simulation it is possible to redefine regulation and control strategies in order to optimize the operation of the absorption chiller. Finally, based on the numerical simulation results, improvements on the set-up of a new 7kW prototype are addressed.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A multiple marker level-set method for simulation of bubbly flows

  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Castro González, Jesús|||0000-0002-8943-2402
  • Oliva Llena, Asensio|||0000-0002-2805-4794
A multiple marker level-set (MLS) method is introduced for Direct Numerical Simulation of bubbles and droplets, which is integrated in a finite-volume framework on collocated unstructured grids of arbitrary element type. The MLS method is based on the idea of describing separate interfaces in the disperse phase with different levelset functions to prevent numerical and potentially unphysical coalescence of bubbles or droplets without excessive refinement. Thus, bubbles or droplets are able to approach each other closely, within the size of one grid cell, and can even collide, while artificial merging of the interfaces is prevented. The accuracy of the computational method implemented is examined for the problem of a single bubble rising in quiescent liquid. For the validation of the multiple marker level-set method we study the gravity-driven impact of a droplet on a liquid-liquid interface and finally it is applied on simulation of gravity-driven bubbly flow in a vertical pipe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Numerical and experimental analysis of air to water heat pumps

  • Oliet Casasayas, Carles|||0000-0003-2170-5299
  • Sadurní Caballol, Alexandre
  • Ablanque Mejía, Nicolás|||0000-0001-6418-2147
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
In the present work a numerical and experimental analysis of a R134a air to water heat pump is carried out. A numerical model has been developed and implemented to predict the heat pump thermal and fluid-dynamic behavior. The model is based on an object-oriented simulation tool called NEST where the whole system is modeled as a collection of different blocks linked between them. Each block represents a specific element of the system such as heat exchangers, compressors or expansion devices. The resolution procedure consists in solving all the blocks/elements iteratively until a converged solution is reached. In addition, a fully instrumented experimental facility has been built and commissioned in order to acquire experimental data and compare them against the numerical model predictions. In this work, the main aspects of the numerical model are presented together with a brief description of the experimental unit. The numerical results are compared against the experimental data and different numerical parametric studies are carried out., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Numerical evaluation of multi-layered solid-PCM thermocline-like tanks as thermal energy storage systems for CSP applications

  • Galione Klot, Pedro Andrés
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Torras Ortiz, Santiago|||0000-0001-5014-7383
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
The two-tank system is the technology used for thermal energy storage (TES) in current concentrating solar power (CSP) plants. Thermocline storage concept has been considered for more than a decade as a possible solution to reduce the high cost of the storage system in these plants. In previous works, multi-layered solid-PCM (MLSPCM) thermocline-like storage tank configurations has been introduced and studied, giving promising results for their use as thermal energy storage systems for CSP. In this work, further analysis is performed in the use of this new concept of TES, by considering variable inlet conditions, and simulating the tank shell and the foundation. The numerical simulations are based on a modular object-oriented methodology. Energetic and exergetic results are presented and compared against a reference 2-tank case and against different thermocline configurations with either solid or phase change filler materials. Again, promising results are obtained for the tested MLSPCM concept., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Numerical evaluation of multi-layered solid-PCM thermocline-like tanks as thermal energy storage systems for CSP applications

  • Galione Klot, Pedro Andrés
  • Pérez Segarra, Carlos David
  • Rodríguez Pérez, Ivette María
  • Torras Ortiz, Santiago
  • Rigola Serrano, Joaquim
The two-tank system is the technology used for thermal energy storage (TES) in current concentrating solar power (CSP) plants. Thermocline storage concept has been considered for more than a decade as a possible solution to reduce the high cost of the storage system in these plants. In previous works, multi-layered solid-PCM (MLSPCM) thermocline-like storage tank configurations has been introduced and studied, giving promising results for their use as thermal energy storage systems for CSP. In this work, further analysis is performed in the use of this new concept of TES, by considering variable inlet conditions, and simulating the tank shell and the foundation. The numerical simulations are based on a modular object-oriented methodology. Energetic and exergetic results are presented and compared against a reference 2-tank case and against different thermocline configurations with either solid or phase change filler materials. Again, promising results are obtained for the tested MLSPCM concept., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Preliminary evaluation of a pre-industrial air-cooled LiBr-H2O small capacity absorption machine

  • Farnós Baulenas, Joan
  • Castro González, Jesús
  • Morales Ruíz, Sergio
  • García Rivera, Eduardo
  • Oliva Llena, Asensio
The paper describes the thermal design, and evaluates the preliminary operational results of a small capacity pre-industrial LiBr-H2O air-cooled absorption machine in order to validate a numerical model and apply it to simulate a new 7kW LiBr-H2O air-cooled absorption chiller, conceived for low temperature driven, solar cooling or wasted heat. This numerical model is able to simulate the dynamical thermohydraulic behavior of a single-effect absorption machine in transient conditions, being implemented using a NEST platform (object-oriented numerical tool). The analysis of the absorption machine interaction with the other components of a solar cooling facility is also enhanced. Numerical results are obtained and the validation tested. From the simulation it is possible to redefine regulation and control strategies in order to optimize the operation of the absorption chiller. Finally, based on the numerical simulation results, improvements on the set-up of a new 7kW prototype are addressed., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Parametric study of two-tank TES systems for CSP plants

  • Torras Ortiz, Santiago
  • Pérez Segarra, Carlos David
  • Rodríguez Pérez, Ivette María
  • Rigola Serrano, Joaquim
  • Oliva Llena, Asensio
The two-tank thermal energy storage (TES) system is the most used technology for storage in concentrating solar power (CSP) plants. This work focuses on a parametric study, which aims to identify the most important parameters on TES system, in order to improve the design and increase the performance of the plant. Three parameters have been considered: meteorological data, insulation thickness of the storage tank, and configuration of the foundation of the storage tank. The effect of each parameter is evaluated using numerical simulations based on a modular object-oriented methodology. The main issues related to the mathematical models and its numerical methodology are also presented in this paper., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A level-set aided single-phase model for the numerical simulation of free-surface flow on unstructured meshes

  • Schillaci, Eugenio
  • Jofre Cruanyes, Lluís
  • Balcázar Arciniega, Néstor
  • Lehmkuhl Barba, Oriol
  • Oliva Llena, Asensio
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A new single-phase scheme for the numerical simulation of free-surface problems on 3-D unstructured meshes is presented. The flow field is obtained from the discrete solution of the incompressible Navier-Stokes equations, whereas a conservative level-set method is employed to capture fluid interfaces on an Eulerian approach. The scheme is based on a novel treatment of the interface for the deactivation of the light phase, allowing an optimization of the classic two-phase model for the cases in which the influence of the lighter phase is negligible. The deactivation is performed by directly imposing the appropriate pressure at the surface boundary, and, unlike similar approaches, without the need to treat near-interface velocities. The method is validated against various analytical and experimental references, demonstrating its potential on both hexahedral and unstructured meshes. Moreover, it shows higher numerical stability in comparison to two-phase solvers, as well as significant advantages in terms of computational performance., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A free surface model for the numerical simulation of oscillating water column systems

  • Schillaci, Eugenio
  • Balcázar Arciniega, Néstor
  • Jofre Cruanyes, Lluís
  • Lehmkuhl Barba, Oriol
  • Castro González, Jesús
The aim of this work is to propose and validate a numerical model that represents the hydrodynamic behavior of an Oscillating Water Column (OWC) device, that has been shown to be one of the most promising ways to extract energy from ocean waves: successful demonstrative set-up have been realized both on shore based structures (LIMPET device in Scotland and PICO plant in Azores) and on anchored floating ones (OE Buoy in Ireland) [1]. A Level Set scheme was employed to track the free moving interface in an incompressible, transient two-phase flow, globally governed by the Navier-Stokes and the mass conservation equations. After being validated, the model was used to investigate the interaction of linear waves with a submerged air chamber; several set-up were analyzed by monitoring the characteristics magnitudes, in order to assess the accuracy of the model and to optimize the hydrodynamic efficiency of the device. In the second part, a single phase Level Set method was developed and used to simulate the same problem., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A new thermocline-PCM thermal storage concept for CSP plants. Numerical analysis and perspectives

  • Galione Klot, Pedro Andrés
  • Pérez Segarra, Carlos David
  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
  • Rigola Serrano, Joaquim
Thermocline storage concept has been considered for more than a decade as a possible solution to reduce the huge cost of the storage system in CSP plants. However, one of the drawbacks of this concept is the decrease in its performance throughout the time. The objective of this paper is to present a new thermocline-PCM storage concept which aims at circumventing this issue. The concept proposed is built of different solid filler materials and encapsulated PCMs combined into a multi-layer storage tank with molten salt as heat transfer fluid. The performance evaluation of each of the prototypes proposed is virtually tested by means of a detailed numerical methodology which considers the heat transfer and fluid dynamics phenomena present in these devices. The virtual tests carried out are designed so as to take into account several charging and discharging cycles until equilibrium is achieved, i.e. the same amount of energy stored in the charging phase is delivered in the discharge. As a result, the dependence of the storage capacity on the PCMs temperatures, the total energy stored/released, as well as the efficiencies of the storing process have been compared for the different thermocline, PCM-only and multi-layered thermocline-PCM configurations. Based on this analysis the selection of the best option for a given case/plant is proposed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A multiple marker level-set method for simulation of bubbly flows

  • Balcázar Arciniega, Néstor
  • Jofre Cruanyes, Lluís
  • Lehmkuhl Barba, Oriol
  • Castro González, Jesús
  • Oliva Llena, Asensio
A multiple marker level-set (MLS) method is introduced for Direct Numerical Simulation of bubbles and droplets, which is integrated in a finite-volume framework on collocated unstructured grids of arbitrary element type. The MLS method is based on the idea of describing separate interfaces in the disperse phase with different levelset functions to prevent numerical and potentially unphysical coalescence of bubbles or droplets without excessive refinement. Thus, bubbles or droplets are able to approach each other closely, within the size of one grid cell, and can even collide, while artificial merging of the interfaces is prevented. The accuracy of the computational method implemented is examined for the problem of a single bubble rising in quiescent liquid. For the validation of the multiple marker level-set method we study the gravity-driven impact of a droplet on a liquid-liquid interface and finally it is applied on simulation of gravity-driven bubbly flow in a vertical pipe., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Numerical and experimental analysis of air to water heat pumps

  • Oliet Casasayas, Carles
  • Sadurní Caballol, Alexandre
  • Ablanque Mejía, Nicolás
  • Rigola Serrano, Joaquim
In the present work a numerical and experimental analysis of a R134a air to water heat pump is carried out. A numerical model has been developed and implemented to predict the heat pump thermal and fluid-dynamic behavior. The model is based on an object-oriented simulation tool called NEST where the whole system is modeled as a collection of different blocks linked between them. Each block represents a specific element of the system such as heat exchangers, compressors or expansion devices. The resolution procedure consists in solving all the blocks/elements iteratively until a converged solution is reached. In addition, a fully instrumented experimental facility has been built and commissioned in order to acquire experimental data and compare them against the numerical model predictions. In this work, the main aspects of the numerical model are presented together with a brief description of the experimental unit. The numerical results are compared against the experimental data and different numerical parametric studies are carried out., Peer Reviewed, Postprint (published version)