Skip to main content

TECNOLOGIAS DE BATERIAS DE ION-LI E ION-NA PARA APLICACIONES EN TRANSPORTE Y ALMACENAMIENTO EN RED ELECTRICA

ENE2013-44330-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre CENTRO DE INVESTIGACION COOP DE ENERGIAS ALTERNATIVAS CIC ENERGIGUNE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymeric Redox-Active Electrodes for Sodium-Ion Batteries

  • Fernández, Naiara
  • Sánchez-Fontecoba, P.
  • Castillo-Martínez, E.
  • Carretero-González, Javier
  • Rojo, Teófilo
  • Armand, M.
Polymer binding agents are critical for the good performance of the electrodes of Na- and Li-ion batteries during cycling as they hold the electroactive material together to form a cohesive assembly because of their mechanical and chemical stability as well as adhesion to the current collector. New redox-active polymer binders that insert Na ions and show adhesion properties were synthesized by adding polyether amine blocks (Jeffamine) based on mixed propylene oxide and ethylene oxide blocks to p-phenylenediamine and terephthalaldehyde units to form electroactive Schiff-base groups along the macromolecule. The synthetic parameters and the electrochemical properties of these terpolymers as Na-ion negative electrodes in half cells were studied. Reversible capacities of 300 mAh g (50 wt % conducting carbon) and 200 mAh g (20 wt % conducting carbon) were achieved in powder and Cu-supported electrodes, respectively, for a polySchiff-polyether terpolymer synthesized by using a poly(ethylene oxide) block of 600 g mol in place of one third of the aniline units. The new redox-active polymers were also used as a binding agent of another anode material (hard carbon), which led to an increase of the total capacity of the electrode compared to that prepared with other standard fluorinated polymer binders such as poly(vinylidene) fluoride., The authors thank Dr. Juan Miguel Ljpez del Amo for the NMR experiments and SGIKER (UPV-EHU) for the DSC measurements. The authors thank LINABATT project from Ministerio de Econom&a y Competitividad (ENE2013-44330-R) and Gobierno Vasco (ETORTEK CIC ENERGIGUNE 10) for funding. P.S.-F. acknowledges the University of the Basque Country for a predoctoral grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature effect on the synthesis of lignin-derived carbons for electrochemical energy storage applications

  • Navarro-Suárez, A. M.
  • Saurel, Damien
  • Sánchez-Fontecoba, P.
  • Castillo-Martínez, E.
  • Carretero-González, Javier
  • Rojo, Teófilo
Herein, we present a detailed study by N sorption and Small Angle X-ray Scattering (SAXS) of the carbonization and KOH activation of lignin for its application as active material for electrochemical energy storage. It has been observed that i) the carbonization of lignin above 700 °C leads to a hard carbon with a large amount of bulk (buried) fine structure microporosity and a good performance as Na-ion negative electrode, ii) when KOH activation is done after complete carbonization it is mainly increasing the accessibility of the initial bulk microporosity, leading to a carbon with good performance as symmetric supercapacitor in aqueous electrolyte and iii) when carbonization and KOH activation are done simultaneously, a distinct pore structure is generated with a large amount of mesopores, suitable for symmetric supercapacitor in organic electrolyte. By combining SAXS, which is sensitive to bulk as well as surface porosity, and N sorption which probes surface porosity, it has been possible to follow the intricate mechanism of microporosity development. Finally, it is believed that these results can be extrapolated to various biomass based precursors., The authors acknowledge Carlos Berlanga for the thermal analysis measurements. This work was financially supported by the Etortek Program (ENERGIGUNE12) of the Basque Government and by the Ministerio de Economía y Competitividad of the Spanish Government through Proyectos I + D Retos 2013 program (LINABATT project, reference number: ENE2013- 44330-R). AMNS was supported by the Basque Government Scholarship for pre-doctoral formation (PRE_2014_1_62). PSF acknowledges the UPV-EHU University for the pre-doctoral grant. JCG would like to thank Spanish Ministry of Economy, Industry and Competitiveness, for funding through a Ramón y Cajal fellowship (RYC-2015-01627)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid biopolymer electrodes for lithium- and sodium-ion batteries in organic electrolytes

  • Navarro-Suárez, A.
  • Carretero-González, Javier
  • Casado, Nerea
  • Mecerreyes, David
  • Rojo, T.
  • Castillo-Martínez, E.
The use of earth abundant and renewable materials is encouraging for the future development of environmentally clean, safe and affordable electrodes for lithium- and sodium-ion batteries. Biohybrid electrodes based on lignin and several conducting polymers have been studied mainly for supercapacitor applications. Here, we show that biohybrid electrodes containing natural lignin and a PEDOT conjugated polymer serve as electroactive materials for lithium- and sodium-ion batteries using liquid organic electrolytes. A reversible discharge capacity of 74 mA h g¿1, at C/20 (4 mA g¿1) rate, was achieved in the voltage range between 1 V and 4.5 V, with peak values of up to 159 mA h g¿1. These properties make the natural lignin¿PEDOT hybrid material a suitable organic positive electrode for Li- and Na-ion batteries., This work was Financially supported by the European Research Council through Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 (DM), the Etortek Program (ENERGIGUNE12) of the Basque Government and the Ministerio de Economía y Competitividad (MINECO) of the Spanish Government through the Proyectos I+D Retos 2013 program (LINABATT project, reference number: ENE2013-44330-R). AMNS (PRE_2014_1_62) and NC were supported by the Basque Government Scholarship for pre-doctoral formation. JCG would like to thank the Spanish Ministry of Economy, Industry and Competitiveness, for funding through a Ramón y Cajal fellowship (RYC-2015-01627). Finally, the kind donation of black liquor samples from Smurt Kappa Nervion (Basque Country, Spain) and Papelera Guipuzcoana de Zicuñaga, S. A. (Basque Country, Spain) is gratefully acknowledged., Peer Reviewed