Skip to main content

MEJORA DE LA CONVERSION DE ENERGIA SOLAR MEDIANTE PROCESOS DE EXCITACION ELECTRONICA EN 2 ETAPAS: MATERIALES NANOESTRUCTURADOS PARA FOTOGENERACION DE HIDROGENO

ENE2013-46624-C4-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laccase-Catalyzed Bioelectrochemical Oxidation of Water Assisted with Visible Light

  • Tapia, Cristina
  • Shleev, Sergey
  • Conesa Cegarra, José Carlos
  • López de Lacey, Antonio
  • Pita, Marcos
Here we present the modification of fluorinated tin oxide electrodes with In2S3, an n-type semiconductor chalcogenide that absorbs visible light (λ ≤600 nm), and its further use as an active scaffold for laccase-catalyzed oxidation of water. Illumination of an FTO-In2S3- laccase electrode yields O2 production at much lower applied potential in comparison to the previous example using the same laccase, where only electric energy was applied. The present system allows a diversification of the energy applied to accomplish the water splitting, taking a portion of it from the sun. This work is the first example where an enzyme other than PSII has been used in combination with visible light to biocatalyze O2 evolution., This work was funded by the Spanish MINECO/FEDER projects CTQ2015-71290-R and ENE2013-46624-C4-1-R, by the CSIC PIE 201560I018 project, and by the European Commission project “Bioenergy” FP7-PEOPLE-2013-ITN-607793. A scholarship for C.T. was funded by the Spanish MINECO contract BES-2013-064099., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In Situ Determination of Photobioproduction of H2 by In2S3-[NiFeSe] Hydrogenase from Desulfovibrio vulgaris Hildenborough Using Only Visible Light

  • Tapia, Cristina
  • Zacarias, Sonia
  • Pereira, Inês A. C.
  • Conesa Cegarra, José Carlos
  • Pita, Marcos
  • López de Lacey, Antonio
An interesting strategy for photocatalytic production of hydrogen from water and sunlight is the formation of a hybrid photocatalyst that combines an inorganic semiconductor able to absorb in the visible light spectral range with an enzymatic catalyst for reducing protons. In this work we study how to optimize the interfacing of In2S3 particles with the soluble form of [NiFeSe] hydrogenase from Desulfovibrio vulgaris Hildenborough by means of its initial H2 photoproduction rate. The kinetics of the photocatalytic process was studied by membrane-inlet mass spectrometry, in order to optimize the interaction between both components of the hybrid photocatalyst. Membrane-inlet mass spectrometry allows measuring in the same experiment, for comparison, the rate of H2 production by the photocatalyst hybrid directly in the aqueous solution in real time and the result of a standard assay of the hydrogenase activity. An incubation period of 6 h with mild stirring of hydrogenase with In2S3 particles was necessary for optimal interaction of the enzyme molecules with the porous surface of the semiconductor. A turnover frequency of the NiFeSe hydrogenase (TOFHase) for H2 photobioproduction of 986 s–1 was measured under the optimized conditions. This means that the immobilized hydrogenase has a photocatalytic efficiency for H2 generation which is 94% of that obtained in the standard specific activity test of H2 production using reduced methyl viologen as an electron donor., This work was funded by the Spanish MINECO (projects CTQ2015-71290-R and ENE2013-46624-C4-1-R) and by Fundação para a Ciência e a Tecnologia (Portugal) (Grants UID/Multi/04551/2013 and PTDC/BBB-BEP/2885/2014 and Ph.D. fellowship SFRH/BPD/xxx/201x). C.T. thanks the Spanish MINECO for her BES-2013-064099 contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic Structure of the (Undoped and Fe-Doped) NiOOH O2 Evolution Electrocatalyst

  • Conesa Cegarra, José Carlos
A DFT study was carried out on the atomic and electronic structure of bulk β-NiOOH, with and without substitution of Ni by Fe, examining different stackings and proton distributions in the constituent sheets. The energies of different NiOOH configurations, evaluated at the DFT + U level including dispersion interactions, have very similar values for different stackings and proton distributions, justifying the observed fact that NiOOH is usually obtained in highly disordered form and supporting the assumption that local structures might depend on the synthesis method. Ni ions seem to prefer centrosymmetric coordinations, even if this implies inhomogeneous numbers of OH groups around them; these inhomogeneities can even induce disproportionation of Ni3+ into Ni2+ and Ni4+. The electronic structure, computed with a hybrid DFT functional able to give accurate band gaps for different materials, always shows semiconducting character, with band gaps having widths varying in the 0.8–1.5 eV range and edges formed by Ni 3d states. A metallic character, anticipated by some earlier DFT calculations, is never found. Substitution of Ni by Fe seems to be preferred at sites coordinated with lower numbers of OH groups; this can induce electron transfer from Fe to Ni, that is, formation of Fe4+ and Ni2+, accompanied in some cases by proton jumps across the intersheet space. Some local-level environments, the presence of which might depend on the material synthesis method used, can however stabilize Fe3+, explaining conflicting literature data on the preferred redox state of Fe when included in NiOOH. Overall, the system seems to facilitate electron and proton movement across the material, which can help electrocatalytic O2 evolution processes., This work was carried out under financial support from Projects BOOSTER (Plan Estatal de I+D, project no. ENE2013-46624-C4-1-R) and Madrid-PV-CAM (Comunidad de Madrid, program no. S2013/MAE-2780)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heterogeneous photocatalysis: Light-matter interaction and chemical effects in quantum efficiency calculations

  • Muñoz-Batista, Mario J.
  • Kubacka, Anna
  • Hungría, Ana B.
  • Fernández, M.
In this contribution we analyze the calculation of the quantum efficiency observable in the gas-phase heterogeneous photocatalytic oxidation of toluene. To this end, we carried out porosimetry, UV–visible optical, and TEM tomography measurements together with the mathematical modeling of the most significant physico-chemical factors influencing the quantum efficiency observable. Critical factors concern physical properties related to the light-matter interaction as well as the chemical properties defining the outcome of the reaction. Among the firsts, we analyze the effective catalyst surface area illuminated and provide a detailed formulation of the radiation model, including main absorbance, transmittance and reflectance events. For chemical properties not only the activity but also the selectivity was considered. The work was carried out with a dual aim. First, by scanning a basis set containing most common reactor geometries and light sources, we illustrate quantitatively (numerically) and qualitatively (relative among factors) the importance of each one of the above mentioned factors in quantum efficiency calculations. Second, using a series of samples with “continuous” variation of chemical, textural, morphological and optical properties we calibrate the goodness of common simplifications utilized to represent the above mentioned physical/chemical factors and measure their numerical effects in the quantum efficiency observable. Combination of these two approaches provides a general scheme to bundle and interpret all physico-chemical factor effects in quantum efficiency outputs and can serve as a guide to calibrate current quantum efficiency formulations accuracy., A. Kubacka and M.J. Muñoz-Batista thank MINECO − Spain for support through, respectively, the postdoctoral “Ramón y Cajal” and predoctoral FPI programs. Financial support by MINECO is also acknowledged (Project ENE2013-46624-C4-1 partially financed by FEDER)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cu–TiO2 systems for the photocatalytic H2 production: Influence of structural and surface support features

  • Obregón, Sergio
  • Muñoz-Batista, Mario J.
  • Fernández, M.
  • Kubacka, Anna
  • Colón, Gerardo
The influence of different TiO2 supports on the Cu active species has been studied. It was found that the photocatalytic H2 evolution is highly affected by the structural and electronic features of surface Cu species. Thus, metal dispersion and oxidation state appears strongly conditioned by the structural and surface properties of the TiO2 support. We have examined three TiO2 supports prepared by different synthetic methods; sol–gel, hydrothermal and microemulsion. In addition, we have induced structural and surface modifications by sulfate pretreatment over freshly prepared TiO2 precursors and subsequent calcination. Notably different copper dispersion and oxidation state is obtained by using these different TiO2 supports. From the wide structural and surface analysis of the catalysts we are able to propose that the occurrence of highly disperse Cu2+ species, the sample surface area as well as the crystallinity of the TiO2 support are directly related to the photocatalytic activity for H2 production reaction., We acknowledge the financial support by Junta de Andalucía and MINECO-CICYT through FQM-4570, ENE2011-24412, and ENE2013-46624-C4-1-R (the latter partially financed by FEDER) projects. S. Obregón thanks CSIC for the concession of a JAE-Pre grant. A. Kubacka and M.J. Muñoz-Batista also thank Spanish MINECO for, respectively, Ramón y Cajal Post-doctoral and FIP Predoctoral fellowships, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient and stable Ni-Ce glycerol reforming catalysts: Chemical imaging using X-ray electron and scanning transmission microscopy

  • Gallegos-Suárez, Esteban
  • Guerrero-Ruiz, Antonio
  • Fernández, M.
  • Rodríguez-Ramos, Inmaculada
  • Kubacka, Anna
Nickel–ceria composite catalysts prepared by a microemulsion method showed outstanding catalytic behavior in hydrogen production by glycerol steam reforming. Contrarily to usual Ni-based catalysts, the system allows long-term stability and nearly absence of by-products, particularly methane and carbon monoxide. With the help of scanning transmission electron microscopy and energy dispersive X-ray spectroscopy we confirmed the key role played by an intimate intermixing of Ni and Ceria components at reaction conditions. In addition, chemical imaging maps as well as more conventional techniques, such as Temperature Programmed Oxidation (TPO) and X-ray Photoelectron Spectroscopy (XPS) were used to identify the carbon containing (including coke) species nature and to establishing their chemical relevance. Combination of these techniques points out that the optimum interphase contact, reached for a specific 20:80 molar Ni:Ce formulation, allows; (i) to keep the Ni particle size controlled with absence of significant formation of coke and thus without deleterious effects on the long-term stability of the catalysts; and (ii) to eliminate undesirable side reactions such as methanation., Financial support of the Spanish Government by Projects ENER2013-46624-C4-1-R, CTQ2010-60480, CTQ2011-29272-C04-01 and 03 is recognized. We thank Miss María Almohalla Hernández for recording XPS spectra. Ana Kubacka thanks the Ministerio de Economía y Competitividad for a “Ramon y Cajal” Postdoctoral Fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing promoting effects in g-C3N4-Mn+/CeO2-TiO2 ternary composites: Photo-handling of charge carriers

  • Muñoz-Batista, Mario J.
  • Nasalevich, Maxim A.
  • Savenije, Tom J.
  • Kapteijn, Freek
  • Gascón, Jorge
  • Kubacka, Anna
  • Fernández, M.
The promotion of a TiO2 photocatalyst by surface species consisting of cerium oxide and metal-promoted carbon nitride (g-C3N4) was analyzed to gain insight into the effect of Ca or Fe cationic species of the carbon nitride component in the overall performance of the photocatalytic system. The resulting materials were characterized with X-ray diffraction, time-resolved microwave conductivity (TRMC) and photoelectron, infrared, UV–visible and photoluminescence spectroscopies. The photoactivity of the materials in the gas phase elimination of toluene was evaluated under UV and sunlight-type illumination conditions and the corresponding true reaction quantum efficiency values calculated. The photoluminescence and TRMC analyses provide unequivocal evidence that the presence of Fe and Ca alter charge recombination to a different degree, leading to qualitatively different, promoting photochemical effects. This occurs exclusively in co-presence of ceria species at the titania surface and is thus characteristic of the ternary composite heterostructures., A. Kubacka and M.J. Muñoz-Batista thank MINECO (Spain) for support thought, respectively, the postdoctoral >Ramón y Cajal” and predoctoral FPI programs. M.J.M-B. also wants to thank MINECO for a grant to visit Delft University (EEBB-I-14-08086). Financial support by MINECO (projects CTQ2010-14872/BQU and ENE2013-46624-C4-1-R) and Dutch National Research School “Combination Catalysis Controlled by Chemical Design” (NRSC-Catalysis) are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evolution of H2 photoproduction with Cu content on CuOx-TiO2 composite catalysts prepared by a microemulsion method

  • Kubacka, Anna
  • Muñoz-Batista, Mario J.
  • Fernández, M.
  • Obregón, Sergio
  • Colón, Gerardo
Copper oxides in contact with anatase correspond to promising materials with high activity in the photoproduction of hydrogen by aqueous reforming of alcohols. By a single pot microemulsion method we obtained a series of Cu–Ti composite systems with controlled copper content in the 0–25 wt.% range. The scanning of such a wide range of composition led to the discovery of two well differentiated maxima in the photo-reaction performance. These maxima present rather high and relatively similar reaction rates and photonic efficiencies but are ascribed to the presence of different copper species. A multitechnique analysis of the materials indicates that the maxima obtained comes from optimizing different steps of the reaction; while the first would be connected with a positive effect on anatase charge handling performance the second seems exclusively related to electron capture by surface copper species., A. Kubacka and M.J. Muñoz-Batista thank Spanish MINECO for, respectively, Raman y Cajal Post-doctoral and FIP Predoctoral fellowships. S. Obregón also thanks CSIC for the concession of a JAE-Pre grant. The financial support by projects ENE2013-46624-C4-1-R, P09-FQM-4570, and ENE2011-24412 is fully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of the Interface in Base-Metal Ceria-Based Catalysts for Hydrogen Purification and Production Processes

  • Kubacka, Anna
  • Martínez Arias, Arturo
  • Fernández, M.
The role of the interface in Cu,Ni‐CeO2 catalysts used for novel hydrogen purification and production processes (preferential oxidation of CO, water–gas shift reactions, and the reforming of bio‐alcohols) is analyzed with an emphasis on the description of the physico‐chemical properties of the interface that have a critical influence on the catalytic properties. The direct contact between the base metal and ceria, as well as a contact mediated by alien species, are studied. Critical appraisal of the results indicates that specific base‐metal and ceria interaction situations control the redox response to the gas‐phase atmosphere. Together with specific base‐metal structural effects, these properties seem particularly important in controlling the interaction with CO and H2O as well as with carboxy/carboxylate moieties, and therefore, are important to drive the activity, selectivity, and stability for the mentioned catalytic processes., Authors are indebted to MINECO (ENE2013‐46624‐C4‐1‐R , and CTQ2012‐32928) and BNL and ESRF synchrotrons for supporting the experimentation here presented. A.K. thanks the MINECO for a Ramón y Cajal Postdoctoral Fellowship., Peer Reviewed