Skip to main content

MEJORA DE LA CONVERSION DE ENERGIA SOLAR MEDIANTE PROCESOS DE EXCITACION ELECTRONICA EN DOS ETAPAS: DEL POLVO A DISPOSITIVOS DE CAPA DELGADA

ENE2013-46624-C4-3-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Size and aspect ratio control of Pd2Sn nanorods and their water denitration properties

  • Luo, ZhiShan
  • Genç, Aziz
  • Arbiol, Jordi
  • Cabot, Andreu
Monodisperse Pd2Sn nanorods with tuned size and aspect ratio were prepared by co-reduction of metal salts in the presence of trioctylphosphine, amine, and chloride ions. Asymmetric Pd2Sn nanostructures were achieved by the selective desorption of a surfactant mediated by chlorine ions. A preliminary evaluation of the geometry influence on catalytic properties evidenced Pd2Sn nanorods to have improved catalytic performance. In view of these results, Pd2Sn nanorods were also evaluated for water denitration., This work was supported by the European Regional Development Funds, Generalitat de Catalunya 2014SGR1638, and Spanish MINECO for ENE2013-46624-C4-3-R, 2014 SGR 1640, CTQ2012-35789-C02-02, and CSD2009-00050. ZhiShan Luo thanks the China Scholarship Council (CSC 201206740024) for scholarship support. Maria Ibañez thanks AGAUR for her Beatriu i Pinós (2013 BP-A 00344) postdoctoral grant. Aziz Genç acknowledges the scholarship from the Ministry of National Education of Turkey. J.A. acknowledges ICN2 Severo Ochoa Excellence grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Co-Cu nanoparticles: synthesis by galvanic replacement and phase rearrangement during catalytic activation

  • Nafria, Raquel
  • Genç, Aziz
  • Ibáñez, María
  • Arbiol, Jordi
  • Ramírez de la Piscina, Pilar
  • Homs, Narcís
  • Cabot, Andreu
The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-CoO nanoparticles with randomly distributed CuO and CoO crystallites. During a posterior reduction treatment in H atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO hydrogenation in real working conditions., The research was supported by the European Regional Development Funds and the Spanish MICINN projects CSD2009-00050, MAT2014-52416-P, and ENE2013-46624-C4-3-R. M.I. thanks AGAUR for her Beatriu de Pinós postdoctoral grant 2013 BP-A00344. J.A. and A.G. acknowledge the funding from the Spanish MINECO Severo Ochoa Excellence Program and Generalitat de Catalunya 2014SGR1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mn3O4@CoMn2O4-CoxOy nanoparticles: partial cation exchange synthesis and electrocatalytic properties toward the oxygen reduction and evolution reactions

  • Luo, ZhiShan
  • Ibáñez, María
  • Nafria, Raquel
  • Martí-Sànchez, Sara
  • Genç, Aziz
  • Mata, Maria de la
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Cabot, Andreu
et al., MnO@CoMnO nanoparticles (NPs) were produced at low temperature and ambient atmosphere using a one-pot two-step synthesis protocol involving the cation exchange of Mn by Co in preformed MnO NPs. Selecting the proper cobalt precursor, the nucleation of CoO crystallites at the MnO@CoMnO surface could be simultaneously promoted to form MnO@CoMnO-CoO NPs. Such heterostructured NPs were investigated for oxygen reduction and evolution reactions (ORR, OER) in alkaline solution. MnO@CoMnO-CoO NPs with [Co]/[Mn] = 1 showed low overpotentials of 0.31 V at -3 mA·cm and a small Tafel slope of 52 mV·dec for ORR, and overpotentials of 0.31 V at 10 mA·cm and a Tafel slope of 81 mV·dec for OER, thus outperforming commercial Pt-, IrO-based and previously reported transition metal oxides. This cation-exchange-based synthesis protocol opens up a new approach to design novel heterostructured NPs as efficient nonprecious metal bifunctional oxygen catalysts., This work was supported by the European Regional Development Funds and the Spanish MINECO projects BOOSTER (ENE2013-46624-C4-3-R), TNT-FUELS (MAT2014-59961), e-TNT (MAT2014-59961-C2-2-R) and PEC-CO2 (ENE2012-3651). Z.L. and Y.L. thank the China Scholarship Council for scholarship support. E.I. thanks AGAUR for his Ph.D. grant (FI-2013-B-00769). M.I. thanks AGAUR for the Beatriu de Pinos postdoctoral grant (2013 BP-A00344). S.M. acknowledges funding from “Programa Internacional de Becas ‘la Caixa’-Severo Ochoa”. J.L. is a Serra Hunter Fellow and is grateful to ICREA Academia program. We also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymer-enhanced stability of inorganic perovskite nanocrystals and their application in color conversion LEDs

  • Meyns, Michaela
  • Ibáñez, María
  • Nafria, Raquel
  • Genç, Aziz
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kanaras, Antonio G.
et al., Cesium lead halide (CsPbX, X = Cl, Br, I) nanocrystals (NCs) offer exceptional optical properties for several potential applications but their implementation is hindered by a low chemical and structural stability and limited processability. In the present work, we developed a new method to efficiently coat CsPbX NCs, which resulted in their increased chemical and optical stability as well as processability. The method is based on the incorporation of poly(maleic anhydride-alt-1-octadecene) (PMA) into the synthesis of the perovskite NCs. The presence of PMA in the ligand shell stabilizes the NCs by tightening the ligand binding, limiting in this way the NC surface interaction with the surrounding media. We further show that these NCs can be embedded in self-standing silicone/glass plates as down-conversion filters for the fabrication of monochromatic green and white light emitting diodes (LEDs) with narrow bandwidths and appealing color characteristics., This work was supported by the European Regional Development Funds, the Framework 7 program under project UNION (FP7-NMP-2012-310250) and HI-LED (FP7-ICT-2013-11-619912), as well as the Spanish MINECO Projects BOOSTER (ENE2013-46624-C4-3-R) and AMALIE (TEC2012-38901-C02-01). M.M. thanks the Spanish MINECO for financial support through the Juan de la Cierva-formacion program. A.G. and J.A. acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and Severo Ochoa Excellence Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scalable heating-up synthesis of monodisperse Cu2ZnSnS4 nanocrystals

  • Shavel, Alexey
  • Ibáñez, María
  • Luo, ZhiShan
  • Genç, Aziz
  • Meyns, Michaela
  • Arbiol, Jordi
  • Cabot, Andreu
et al., Monodisperse CuZnSnS (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5 wt % concentration in a crude solution and a yield above 90%., This work was supported by the European Regional Development Funds and the Framework 7 program under the projects UNION (FP7-NMP-2012-310250), SCALENANO (FP7-NMP-ENERGY-2011-284486) and KESTCELLS (FP7/2007- 2013/316488) and the Spanish MINECO Project BOOSTER (ENE2013-46624-C4-3-R). M.I. thanks AGAUR for their Beatriu de Pinós postdoctoral grant (2013 BP-A00344). J.D.R. thanks the FWO (Research Foundation Flanders) for financial support. M.V.K. acknowledges partial financial supportby the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). Authors also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu
  • Cadavid, Doris
  • Ibáñez, María
  • Ortega, Silvia
  • Martí-Sànchez, Sara
  • Dobrozhan, Oleksandr
  • Kovalenko, Maksym V.
  • Arbiol, Jordi
  • Cabot, Andreu
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values., This work was supported by the European Regional Development Funds, the Framework 7 program under project UNION (No. FP7-NMP-2012-310250), and the Spanish MINECO Project BOOSTER (No. ENE2013-46624-C4-3-R). Y.L. thanks the China Scholarship Council (No. CSC 201406500003) for the scholarship support. M.I., O.D., and S.O. thank AGAUR for their Beatriu de Pinós postdoctoral Grant No. (2013 BP-A00344) and Ph.D. grants. M.V.K. acknowledges the partial financial support from the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). Authors also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth of Au–Pd2Sn nanorods via galvanic replacement and their catalytic performance on hydrogenation and sonogashira coupling reactions

  • Nafria, Raquel
  • Luo, ZhiShan
  • Ibáñez, María
  • Martí-Sànchez, Sara
  • Yu, Xiaoting
  • Mata, Maria de la
  • Llorca, Jordi
  • Arbiol, Jordi
  • Kovalenko, Maksym V.
  • Grabulosa, Arnald
  • Muller, Guillermo
  • Cabot, Andreu
Colloidal Pd2Sn and Au–Pd2Sn nanorods (NRs) with tuned size were produced by the reduction of Pd and Sn salts in the presence of size- and shape-controlling agents and the posterior growth of Au tips through a galvanic replacement reaction. Pd2Sn and Au–Pd2Sn NRs exhibited high catalytic activity toward quasi-homogeneous hydrogenation of alkenes (styrene and 1-octene) and alkynes (phenylacetylene and 1-octyne) in dichloromethane. Au–Pd2Sn NRs showed higher activity than Pd2Sn for 1-octene, 1-octyne, and phenylacetylene. In Au–Pd2Sn heterostructures, X-ray photoelectron spectroscopy evidenced an electron donation from the Pd2Sn NR to the Au tips. Such heterostructures showed distinct catalytic behavior in the hydrogenation of compounds containing a triple bond such as tolan. This can be explained by the aurophilicity of triple bonds. To further study this effect, Pd2Sn and Au–Pd2Sn NRs were also tested in the Sonogashira coupling reaction between iodobenzene and phenylacetylene in N,N-dimethylformamide. At low concentration, this reaction provided the expected product, tolan. However, at high concentration, more reduced products such as stilbene and 1,2-diphenylethane were also obtained, even without the addition of H2. A mechanism for this unexpected reduction is proposed., This work was supported by the European Regional Development Funds and the Spanish MINECO projects ENE2013-46624-C4-3-R, MAT2014-59961-C2-2-R, and CTQ2015-65040-P. Z.L. and X.Y. thanks the China Scholarship Council for scholarship support. M.I. thanks AGAUR for Beatriu de Pinós postdoctoral grant (2013 BP-A00344). J.L. is Serra Húnter Fellow and is grateful to ICREA Academia program. Authors also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638. S.M.-S. acknowledges funding from “Programa Internacional de Becas “la Caixa—Severo Ochoa”. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Solution-based synthesis and processing of Sn- and Bi-doped Cu₃SbSe₄ nanocrystals, nanomaterials and ring-shaped thermoelectric generators

  • Liu, Yu|||0000-0001-7313-6740
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Xi, Lili
  • De Roo, Jonathan
  • López Peña, Antonio M.|||0000-0002-6979-5783
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Cabezas, Ignasi
  • De La Mata, Maria|||0000-0002-1581-4838
  • Luo, Zhishan|||0000-0002-0801-9238
  • Dun, Chaochao
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Zhang, Wenqing
  • Martins, José
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Noriega, German
  • Song, Ji-Ming
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystals (NCs) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu₃SbSe₄ (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopy, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes, which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Co-Cu Nanoparticles, Synthesis by Galvanic Replacement and Phase Rearrangement during Catalytic Activation

  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ramírez de la Piscina, Pilar
  • Homs, N.
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-CoO nanoparticles with randomly distributed CuO and CoO crystallites. During a posterior reduction treatment in H atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO hydrogenation in real working conditions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mn₃O₄@CoMn₂O₄-CoₓOy nanoparticles, Partial cation exchange synthesis and electrocatalytic properties toward the oxygen reduction and evolution reactions

  • Luo, Zhishan|||0000-0002-0801-9238
  • Irtem, Erdem
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Nafria, Raquel|||0000-0002-3254-1616
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Genç, Aziz|||0000-0002-2888-2549
  • De La Mata, Maria|||0000-0002-1581-4838
  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Mn₃O₄@CoMn₂O₄ nanoparticles (NPs) were produced at low temperature and ambient atmosphere using a one-pot two-step synthesis protocol involving the cation exchange of Mn by Co in preformed Mn₃O₄ NPs. Selecting the proper cobalt precursor, the nucleation of CoₓOy crystallites at the Mn₃O₄@CoMn₂O₄ surface could be simultaneously promoted to form Mn₃O₄@CoMn₂O₄-CoₓOy NPs. Such heterostructured NPs were investigated for oxygen reduction and evolution reactions (ORR, OER) in alkaline solution. Mn₃O₄@CoMn₂O₄-CoₓOy NPs with [Co]/[Mn] = 1 showed low overpotentials of 0.31 V at -3 mA·cm-2 and a small Tafel slope of 52 mV·dec-1 for ORR, and overpotentials of 0.31 V at 10 mA·cm-2 and a Tafel slope of 81 mV·dec-1 for OER, thus outperforming commercial Pt-, IrO2-based and previously reported transition metal oxides. This cation-exchange-based synthesis protocol opens up a new approach to design novel heterostructured NPs as efficient nonprecious metal bifunctional oxygen catalysts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scalable Heating-Up Synthesis of Monodisperse Cu2ZnSnS4 Nanocrystals

  • Shavel, Alexey|||0000-0002-3995-0391
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • De Roo, Jonathan
  • Carrete, Alex
  • Dimitrievska, Mirjana|||0000-0002-9439-1019
  • Genç, Aziz|||0000-0002-2888-2549
  • Meyns, Michaela|||0000-0003-2476-9001
  • Pérez-Rodríguez, Alejandro
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CuZnSnS (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5wt% concentration in a crude solution and a yield above 90%.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Polymer-enhanced stability of inorganic perovskite nanocrystals and their application in color conversion LEDs

  • Meyns, Michaela|||0000-0003-2476-9001
  • Perálvarez, Mariano
  • Heuer-Jungemann, Amelie
  • Hertog, Wim
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Carreras, Josep
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kanaras, Antonios G.
Cesium lead halide (CsPbX₃, X = Cl, Br, I) nanocrystals (NCs) offer exceptional optical properties for several potential applications but their implementation is hindered by a low chemical and structural stability and limited processability. In the present work, we developed a new method to efficiently coat CsPbX₃ NCs, which resulted in their increased chemical and optical stability as well as processability. The method is based on the incorporation of poly(maleic anhydride-alt-1-octadecene) (PMA) into the synthesis of the perovskite NCs. The presence of PMA in the ligand shell stabilizes the NCs by tightening the ligand binding, limiting in this way the NC surface interaction with the surrounding media. We further show that these NCs can be embedded in self-standing silicone/glass plates as down-conversion filters for the fabrication of monochromatic green and white light emitting diodes (LEDs) with narrow bandwidths and appealing color characteristics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Size and aspect ratio control of Pd₂Sn nanorods and their water denitration properties

  • Luo, Zhishan|||0000-0002-0801-9238
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Antolín, Ana M.
  • Genç, Aziz|||0000-0002-2888-2549
  • Shavel, Alexei
  • Contreras, Sandra
  • Medina, Francesc
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse Pd₂Sn nanorods with tuned size and aspect ratio were prepared by co-reduction of metal salts in the presence of trioctylphosphine, amine, and chloride ions. Asymmetric Pd₂Sn nanostructures were achieved by the selective desorption of a surfactant mediated by chlorine ions. A preliminary evaluation of the geometry influence on catalytic properties evidenced Pd₂Sn nanorods to have improved catalytic performance. In view of these results, Pd₂Sn nanorods were also evaluated for water denitration.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Growth of Au-Pd2Sn Nanorods via Galvanic Replacement and Their Catalytic Performance on Hydrogenation and Sonogashira Coupling Reactions

  • Nafria, Raquel|||0000-0002-3254-1616
  • Luo, Zhishan|||0000-0002-0801-9238
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Yu, Xiaoting|||0000-0003-0457-4047
  • De La Mata, Maria|||0000-0002-1581-4838
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Grabulosa, Arnald|||0000-0003-0198-4139
  • Muller, Guillermo|||0000-0001-6876-0389
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Colloidal PdSn and Au-PdSn nanorods (NRs) with tuned size were produced by the reduction of Pd and Sn salts in the presence of size- and shape-controlling agents and the posterior growth of Au tips through a galvanic replacement reaction. PdSn and Au-PdSn NRs exhibited high catalytic activity toward quasi-homogeneous hydrogenation of alkenes (styrene and 1-octene) and alkynes (phenylacetylene and 1-octyne) in dichloromethane. Au-PdSn NRs showed higher activity than PdSn for 1-octene, 1-octyne, and phenylacetylene. In Au-PdSn heterostructures, X-ray photoelectron spectroscopy evidenced an electron donation from the PdSn NR to the Au tips. Such heterostructures showed distinct catalytic behavior in the hydrogenation of compounds containing a triple bond such as tolan. This can be explained by the aurophilicity of triple bonds. To further study this effect, PdSn and Au-PdSn NRs were also tested in the Sonogashira coupling reaction between iodobenzene and phenylacetylene in N,N-dimethylformamide. At low concentration, this reaction provided the expected product, tolan. However, at high concentration, more reduced products such as stilbene and 1,2-diphenylethane were also obtained, even without the addition of H. A mechanism for this unexpected reduction is proposed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cu2ZnSnS4-Ag2S nanoscale p-n heterostructures as sensitizers for photoelectrochemical water splitting

  • Yu, Xuelian
  • Liu, Jingjing
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • Shavel, Alexey|||0000-0002-3995-0391
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Guangjin
  • Zhang, Yihe
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A cation exchange-based route was used to produce CuZnSnS (CZTS)-AgS nanoparticles with controlled composition. We report a detailed study of the formation of such CZTS-AgS nanoheterostructures and of their photocatalytic properties. When compared to pure CZTS, the use of nanoscale p-n heterostructures as light absorbers for photocatalytic water splitting provides superior photocurrents. We associate this experimental fact to a higher separation efficiency of the photogenerated electron-hole pairs. We believe this and other type-II nanoheterostructures will open the door to the use of CZTS, with excellent light absorption properties and made of abundant and environmental friendly elements, to the field of photocatalysis.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cu2ZnSnS4-PtM (M = Co, Ni) nanoheterostructures for photocatalytic hydrogen evolution

  • Yu, Xuelian
  • An, Xiaoqiang
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Yie
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We report the synthesis and photocatalytic and magnetic characterization of colloidal nanoheterostructures formed by combining a Pt-based magnetic metal alloy (PtCo, PtNi) with CuZnSnS (CZTS). While CZTS is one of the main candidate materials for solar energy conversion, the introduction of a Pt-based alloy on its surface strongly influences its chemical and electronic properties, ultimately determining its functionality. In this regard, up to a 15-fold increase of the photocatalytic hydrogen evolution activity was obtained with CZTS-PtCo when compared with CZTS. Furthermore, two times higher hydrogen evolution rates were obtained for CZTS-PtCo when compared with CZTS-Pt, in spite of the lower precious metal loading of the former. Besides, the magnetic properties of the PtCo nanoparticles attached to the CZTS nanocrystals were retained in the heterostructures, which could facilitate catalyst purification and recovery for its posterior recycling and/or reutilization.