Skip to main content

NUEVOS CONCEPTOS DE CELULAS SOLARES DE BAJO COSTE Y ALTA EFICIENCIA EN CONFIGURACION TANDEM

ENE2014-56237-C4-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Discrepancy between integral and local composition in off-stoichiometric Cu2ZnSnSe4 kesterites: a pitfall for classification

  • Schöppe, Philipp
  • Gurieva, Galina
  • Giraldo, Sergio
  • Martínez-Criado, Gema
  • Ronning, Carsten
  • Saucedo, Edgardo
  • Schorr, Susan
  • Schnohr, Claudia S.
High-efficiency kesterite-based thin film solar cells typically feature Cu-poor, Zn-rich absorbers although secondary phases occur easily in non-stoichiometric CuZnSnSe. We therefore applied high-resolution X-ray fluorescence analysis using a synchrotron nanobeam to study the local composition of a CZTSe cross section lamella cut from a sample with an integral composition of Zn/Sn = 1.37 and Cu/(Zn+Sn) = 0.55. We find submicrometer-sized ZnSe-, SnSe/SnSe-, and even CuSe/CuSe-like secondary phases, while the local compositions of the kesterite are highly Zn-rich yet barely Cu-poor with 1.5 ≤ Zn/Sn ≤ 2.2 and Cu/(Zn+Sn) ∼ 1.0. Consequently, great care must be taken when relating the integral composition to other material properties including the device performance., This work was funded by ESRF, DFG (Deutsche Forschungsgemeinschaft) under Grant No. SCHN 1283/2-1, BMBF (Bundesministerium für Bildung und Forschung) under the “nano@work” project (Grant No. 05 K16SJ1), KESTCELLS 316488, FP7-PEOPLE-2012 ITN, Multi-ITN project, and MINECO (Ministerio de Economía y Competitividad de España) under the NASCENT Project (ENE2014-56237-C4-1-R). S.G. thanks the Government of Spain for the FPI fellowship (BES-2014-068533) and E.S. for the “Ramón y Cajal” fellowship (RYC-2011-09212).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced hetero‐junction quality and performance of kesterite solar cells by aluminum hydroxide nanolayers and efficiency limitation revealed by atomic‐resolution scanning transmission electron microscopy

  • Xie, Haibing
  • Sánchez, Yudania
  • Tang, Peng-Yi
  • Espíndola‐Rodríguez, Moisés
  • Guc, Maxim
  • Calvo‐Barrio, Lorenzo
  • López-Marino, Simon
  • Liu, Yu
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Izquierdo-Roca, Victor
  • Arbiol, Jordi
  • Pérez-Rodríguez, Alejandro
  • Saucedo, Edgardo
A strategy for interface engineering of hetero‐junctions in kesterite solar cells by using Al(OH)3 is demonstrated. The hydroxide nanolayers are prepared via a facile and fast wet chemical route, based on an aqueous solution of aluminum chlorides and thioacetamide. Considerable enhancement of open circuit voltage (Voc) (30–60 mV) and fill factor (FF) (10–20%) after this chemical treatment are observed, achieving a champion conversion efficiency of 9.1% and a champion FF of 70% (among the best FF in kesterite solar cells). The functional mechanism is systematically studied by current‐voltage, capacitance‐voltage, temperature dependence of current–voltage and photoluminescence measurements, which reveal that Al(OH)3 nanolayers can effectively reduce the interface recombination and largely improve the shunt resistance. Furthermore, atomic resolution high angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) evidences the epitaxial relationship of Al(OH)3 with kesterite and CdS, indicating the benign and effective interface passivation achieved by this chemical treatment. Finally, based on HAADF‐STEM and electron energy loss spectroscopy mappings, insights into the efficiency limiting and beneficial factors for CZTSSe solar cells, as well as suggestions to further improve both the bulk and related interfaces are presented., The research leading to these results has received funding from Generalitat de Catalunya 2014SGR1638 and the Spanish MINECO (Ministerio de Economía y Competitividad de España) under the NASCENT (ENE2014‐56237‐C4‐1‐R), the TNT‐FUELS and e‐TNT (MAT2014‐59961) projects, funding from the Framework 7 program under the project KESTCELLS (FP7‐PEOPLE‐2012‐ITN‐316488) and European Regional Development Founds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). Authors from IREC and IN2UB belong to the M‐2E (Electronic Materials for Energy) Consolidated Research Group and the XaRMAE Network of Excellence on Materials for Energy of the “Generalitat de Catalunya”. H. Xie thanks the “China Scholarship Council” fellowship (CSC N° 201206340113), Y. S. the MINECO for the PTA fellowship (PTA2012‐7852‐A), and E.S. the “Ramon y Cajal” fellowship (RYC‐2011‐09212). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV‐2013‐0295)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced hetero-junction quality and performance of kesterite solar cells by aluminum hydroxide nanolayers and efficiency limitation revealed by atomic-resolution scanning transmission electron microscopy

  • Xie, Haibing|||0000-0002-5070-2882
  • Sánchez, Yudania
  • Tang, PengYi|||0000-0002-2306-095X
  • Espíndola-Rodríguez, Moisés
  • Guc, Maxim|||0000-0002-2072-9566
  • Calvo-Barrio, Lorenzo|||0000-0002-6993-1482
  • López-Marino, Simón|||0000-0002-3779-0224
  • Liu, Yu|||0000-0001-7313-6740
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Izquierdo-Roca, Victor
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pérez-Rodríguez, Alejandro
  • Saucedo, Edgardo
A strategy for interface engineering of hetero-junctions in kesterite solar cells by using Al(OH) is demonstrated. The hydroxide nanolayers are prepared via a facile and fast wet chemical route, based on an aqueous solution of aluminum chlorides and thioacetamide. Considerable enhancement of open circuit voltage (V) (30-60 mV) and fill factor (FF) (10-20%) after this chemical treatment are observed, achieving a champion conversion efficiency of 9.1% and a champion FF of 70% (among the best FF in kesterite solar cells). The functional mechanism is systematically studied by current-voltage, capacitance-voltage, temperature dependence of current-voltage and photoluminescence measurements, which reveal that Al(OH) nanolayers can effectively reduce the interface recombination and largely improve the shunt resistance. Furthermore, atomic resolution high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) evidences the epitaxial relationship of Al(OH) with kesterite and CdS, indicating the benign and effective interface passivation achieved by this chemical treatment. Finally, based on HAADF-STEM and electron energy loss spectroscopy mappings, insights into the efficiency limiting and beneficial factors for CZTSSe solar cells, as well as suggestions to further improve both the bulk and related interfaces are presented.