Skip to main content

CELDAS ELECTROQUIMICAS CERAMICAS ESTABILIZADAS CON HALUROS PARA UNA CONVERSION Y PRODUCCION OPTIMIZADA DE HIDROGENO

ENE2015-66183-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structures, Phase Fields, and Mixed Protonic-Electronic Conductivity of Ba-Deficient, Pr-Substituted BaZr0.7Ce0.2Y0.1O3-δ

  • Heras-Juaristi, Gemma
  • Amador, Ulises
  • Romero De Paz, Julio
  • Fuentes, Rodolfo O.
  • Chinelatto, Adilson L.
  • Ritter, Clemens
  • Fagg, Duncan P.
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] The BaZrCeYO-BaPrO perovskite system, of interest for high-temperature electrochemical applications involving mixed protonic-electronic conductivity, forms a solid-solution with a wide interval of Ba substoichiometry in the range Ba(CeZr)PrYO, 0 ≤ x ≤ 1. Structural phase transitions mapped as a function of temperature and composition by high-resolution neutron powder diffraction and synchrotron X-ray diffraction reveal higher symmetry for lower Pr content and higher temperatures, with the largest stability field observed for rhombohedral symmetry (space group, R3c). Rietveld refinement, supported by magnetic-susceptibility measurements, indicates that partitioning of the B-site cations over the A and B perovskite sites compensates Ba substoichiometry in preference to A-site vacancy formation and that multiple cations are distributed over both sites. Electron-hole transport dominates electrical conductivity in both wet and dry oxidizing conditions, with total conductivity reaching a value of 0.5 S cm for the x = 1 end-member in dry air at 1173 K. Higher electrical conductivity and the displacement of oxygen loss to higher temperatures with increasing Pr content both reflect the role of Pr in promoting hole formation at the expense of oxygen vacancies. In more reducing conditions (N) and at low Pr contents, conductivity is higher in humidified atmospheres (0.023 atm pHO) indicating a protonic contribution to transport, whereas the greater electron-hole conductivity with increasing Pr content results in lower conductivity in humidified N due to the creation of protonic defects and the consumption of holes., We thank the MINECO, Spain (ENE2015-66183-R and MAT2016-78362-C4-1-R), CSIC, Spain (i-link0743), and CAPES, Brazil (PVE, Proceso 88881.03418/2013-1). Access to the neutron facilities at the Institut Laue Langevin (Grenoble, France) and the National Synchrotron Light Laboratory (LNLS, Campinas, Brazil) under grant 5-24-55(D2B) and research proposal D10B-XRD1-16166, respectively, is gratefully acknowledged. We also thank the FCT, PTDC/CTM-EME/6319/2014, QREN, FEDER, and COMPETE Portugal and the European Social Fund, European Union. U.A. acknowledges the Universidad San Pablo for financial support. We would also like to thank Steven Kermorvant and Alexandre Bosser of the IUT, University of Rennes (France), for assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature dependence of partial conductivities of the BaZr0.7Ce0.2Y0.1O3-δ proton conductor

  • Heras-Juaristi, Gemma
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] Partial conductivities are presented for BaZrCeYO, an important proton conductor for protonic-ceramic fuel cells and membrane reactors. Atmospheric dependencies of impedance performed in humidified and dry O, air, N and H(10%)/N(90%) in the temperature range 300–900 °C, supported by the modified emf method, confirm significant electron-hole and protonic contributions to transport. For very reducing and wet atmospheres, the conductivity is predominantly ionic, with a higher participation of protons with decreasing temperature and increasing water-vapour partial pressure (pHO). From moderately reducing conditions of wet N to wet O, however, the conductivity is considerably influenced by electron holes as revealed by a significant dependence of total conductivity on oxygen partial pressure (pO). With higher pHO, proton transport increases, with a concomitant decrease of holes and oxygen vacancies. However, the effect of pHO is also influenced by temperature, with a greater protonic contribution at both lower temperature and pO. Values of proton transport number t ≈ 0.63 and electronic transport number t ≈ 0.37 are obtained at 600 °C for pHO = 0.022 atm and pO = 0.2 atm, whereas t ≈ 0.95 and t ≈ 0.05 for pO = 10 atm. A hydration enthalpy of −109 kJ mol is obtained in the range 600–900 °C., We thank the “Ministerio de Economía, Industria y Competitividad” (MINECO) in Spain for financial assistance (ENE2015-66183-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrical properties of proton-conducting BaCe0.8Y0.2O3-δ and the effects of bromine addition

  • Triviño Peláez, Ángel
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] A detailed analysis of the electrical properties of the proton-conducting BaCeYO phase (BCY20) and the effects of Br doping has been undertaken. Members of the system of nominal stoichiometry BaCeYOBr (x = 0, 0.05, 0.1 and 0.2) were synthesised by a citrate-nitrate process and high-temperature annealing up to 1500 °C. X-ray diffraction revealed the formation of single-phase material with a monoclinically distorted perovskite structure (space group I2/m) with greater distortion for Br-synthesised phase. Significant contrasts in electrical behaviour and stability between BCY20 and Br-synthesised series members were also found. However, chemical analysis by total X-ray fluorescence spectroscopy indicated that only trace amounts of Br remain after synthesis, indicating that Br addition influences stoichiometry but not directly the physicochemical properties. Higher conductivity is observed for the Br-synthesised compositions in wet and dry oxidising conditions in the temperature range 300–900 °C, reaching a value of 5.8 S m at 800 °C for the x = 0.2 member in wet O (pHO ∼ 0.022 atm). Determination of partial-conductivity components indicated that, in humid conditions and low temperature, the conductivity of 20% Br-synthesised material is principally protonic (t = 0.91 at 600 °C and pO = 0.2 atm) and superior to that of BCY20. Mixed oxide-ionic-electronic conductivity dominates at high pO (1 atm) and oxide-ionic conductivity at low pO (∼10 atm) in the temperature range 600–900 °C for both BCY and Br-doped samples. Stability was found to be poorer in CO for the Br-synthesised phases as determined by thermogravimetry and prolonged conductivity measurements., We thank MINECO in Spain forfinancial support (project ENE2015-66183-R and predoctoral grant BES-2016-077023). Wewould also like to thank Dr Ramón Fernández Ruiz of the Autonomous University of Madrid for useful discussions concerning TXRF measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Evaluación de las estrategias de mejora de estabilidad química y estudio de las propiedades electroquímicas de perovskitas de conductividad protónica para dispositivos electroquímicos de alta temperatura

  • Triviño Peláez, Ángel
[EN] The main objective of the research performed during this thesis involves the synthesis processing, and characterisation of ceramic materials for application as electrolytes in protonic ceramic fuel cells (PCFC) and protonic ceramic electrolyser cells (PCEC). The studied materials are the most relevant proton-conducting ceramics electrolytes for commercial, high-temperature applications, namely barium and strontium cerates and zirconates with the ABO3 perovskite structure. The perovskites are doped in the B-position with trivalent cations, typically yttrium, to create oxygen vacancies, forming mobile protonic defects in humid atmospheres in the intermediate temperature range (500-800 °C). In general, these materials are characterised by poor chemical stability when submitted to CO2-containing atmospheres and high water-vapour partial pressures, particularly the barium-cerate family. Their use in PCFCs fed with hydrocarbons may be limited during operation since CO and CO2 are formed as by-products and are prone to react with the electrolyte. Hence, one aim of this doctoral thesis is the improvement in the chemical stability of proton-conducting perovskites in CO2-containing and high pH2O atmospheres to develop more versatile proton conductors. Improvements in the stability of PCFCs would lead to greater fuel flexibility, including the use of methane or bioethanol, in addition to enhanced adaptability to other technologies such as membrane reactors. Moreover, stable proton-conducting ceramics may be used in reversible electrochemical cells which can perform in either fuel cell or electrolyser mode in the same device, creating electrical energy from hydrogen conversion and producing hydrogen from electrical energy, as required. In this thesis, the impact of different processing strategies on the chemical stability, including the incorporation of halogens in the oxide-ion sublattice and the introduction of Ba deficiency, is studied, as well as the effects of these approaches on structural, microstructural and electrochemical properties., [ES] La finalidad del trabajo de investigación presentado en esta tesis doctoral se basa en la síntesis y el procesamiento, y en la caracterización estructural, microestructural y electroquímica de materiales cerámicos para su utilización como electrolitos en pilas de combustible cerámicas y electrolizadores cerámicos de conductividad protónica (Protonic Ceramic Fuel Cell, (PCFC), y Protonic Ceramic Electrolyzer Cell, (PCEC)). Los materiales estudiados son los electrolitos conductores protónicos por excelencia en el campo de los óxidos sólidos pertenecientes a las familias de las perovskitas de ceratos y circonatos de bario y estroncio dopados con metales trivalentes en la posición B, utilizando itrio como catión dopante. La introducción de dopantes trivalentes que sustituyen a los cationes huésped tetravalentes de la posición B en la perovskita es indispensable para la generación de vacantes de oxígeno. Éstas, en ambientes humidificados dan lugar a la incorporación de defectos protónicos en la red, cuya movilidad proporciona conductividad protónica al material, relevante en el intervalo de temperaturas de 500-800 ºC. Las perovskitas que contienen Ba en la posición A, y más concretamente las perovskitas basadas en los ceratos, se caracterizan por tener una baja estabilidad química cuando se exponen a atmósferas que contienen CO2 y H2O, siendo susceptibles de carbonatarse y de formar hidróxidos produciendo una degradación mecánica de la membrana electrolítica. Esta característica de los ceratos de bario restringe el uso directo de hidrocarburos como combustibles en los dispositivos PCFC, ya que durante el funcionamiento de la pila se produce CO y CO2 como productos del proceso de reformado del hidrocarburo en el ánodo que envenenan el electrolito, reduciendo la operatividad del dispositivo. Por este motivo, la principal tarea de investigación desarrollada en esta tesis doctoral es la mejora de la estabilidad química en atmósferas que contienen CO2 y H2O de dichos materiales con el fin de desarrollar electrolitos conductores protónicos de gran versatilidad. De esta manera, las pilas de combustible PCFC adquieren una mayor flexibilidad permitiendo la utilización de una gran variedad de combustibles, como el metano o el bioetanol, además de una mayor viabilidad para acoplar las PCFC a otras tecnologías de producción de energía implantadas en el tejido industrial actual. Además, el uso de electrolitos cerámicos conductores protónicos con una estabilidad química adecuada permite que los dispositivos electroquímicos sean multifuncionales, siendo capaces no sólo de producir energía a partir del combustible H2 (PCFC), sino también de operar en el modo inverso de electrólisis para generar hidrógeno mediante la escisión de la molécula de H2O (PCEC) aplicando energía eléctrica. Para ello, se estudia el impacto que tienen las diferentes alternativas presentadas en bibliografía involucradas en la mejora de la estabilidad química en las propiedades estructurales, microestructurales y electroquímicas de los electrolitos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SrZr0.9Y0.1O3−δ thin films by in-situ synthesis of triple alkoxide for protonic ceramic electrolyser membranes

  • Triviño Peláez, Ángel
  • Mather, Glenn C.
  • Pérez-Coll, Domingo
  • Aparicio, Mario
  • Mosa Ruiz, Jadra
[EN] Synthesis of the proton-conducting electrolyte SrZrYO(SZY) was undertaken by the sol–gel method employing an all-alkoxide route from reaction of strontium alkoxide produced in-situ and commercial zirconium and yttrium alkoxides. The solution was homogenized by a previous ligand exchange in 2-methoxyethanol to control the polycondensation rate and achieve SZY at the low final firing temperature of 700–800 °C. SZY thin films (~270 nm) were assisted by dip-coating on different substrates and characterized by scanning and transmission electron microscopy, grazing X-ray diffraction and confocal micro-Raman spectroscopy, revealing well-crystallized SZY phase with orthorhombic symmetry (space group, Pnma). Impedance spectroscopy of a thin film deposited on a quartz substrate revealed that protons contribute to transport in wet conditions as confirmed by a lower conductivity in DO-humidified air (1.02 eV) compared to HO-wetted air (0.99 eV), with the difference in activation energy consistent with a conductive isotope effect. [Figure not available: see fulltext.]., Ministerio de Ciencia, Innovación y Universidades of Spain for financial support (project ENE2015-66183-R, MAT2017-90695-3295-REDT, RTI2018-095088-B-I00 and student grant FPI BES-2016-077023). We also thank D. Ruiz and Dr. A. del Campo for their assistance with the experimental techniques., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Estudio y desarrollo de perovskitas basadas en zirconatos para uso como electrodos y electrolitos en celdas cerámicas protónicas

  • Heras-Juaristi, Gemma
Tesis Doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Química Inorgánica. Fecha de Lectura: 19-06-2024. En: http://hdl.handle.net/10486/715174, El trabajo de investigación de la presente tesis doctoral se ha llevado a cabo a través de los siguientes proyectos relacionados: ENE2012-30929 (“Electrolizadores cerámicos de conducción protónica para la eficiente producción de Hidrogeno”), ENE2015-66183-R (“Celdas Electroquímicas Estabilizadas con Haluros para una Conversión y Producción Optimizada de Hidrógeno”) y RTI2018-095088-B-I00 (“Diseño Innovador de Celdas Electroquímicas Regenerativas de Temperatura Intermedia”) financiados a través del Ministerio de Ciencia, Innovación y Universidades (MICIU) y del proyecto CSIC: I-LINK0743 (“Optimisation of Cathode Performance in Protonic Ceramic Fuel Cells”) dentro del Programa i-link+2013 del CSIC de Conexión Internacional, Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Structures, phase fields, and mixed protonic−electronic conductivity of Ba-Deficient, Pr-Substituted BaZr0.7Ce0.2Y0.1O3−δ

  • Heras Juaristi, Gemma
  • Amador, Ulises
  • Romero de Paz, Julio
  • Fuentes, Rodolfo
  • Chinelatto, Adilson
  • Ritter, Clemens
  • Fagg, Duncan
  • Pérez Coll, Domingo
  • Mather, Glenn
The BaZr0.7Ce0.2Y0.1O3−δ−BaPrO3−δ perovskite system, of interest for high-temperature electrochemical applications involving mixed protonic−electronic conductivity, forms a solidsolution with a wide interval of Ba substoichiometry in the range Ba(Ce0.2Zr0.7)1−xPrxY0.1O3−δ, 0 ≤ x ≤ 1. Structural phase transitions mapped as a function of temperature and composition by highresolution neutron powder diffraction and synchrotron X-ray diffraction reveal higher symmetry for lower Pr content and higher temperatures, with the largest stability field observed for rhombohedral symmetry (space group, R3̅c). Rietveld refinement, supported by magnetic-susceptibility measurements, indicates that partitioning of the B-site cations over the A and B perovskite sites compensates Ba substoichiometry in preference to A-site vacancy formation and that multiple cations are distributed over both sites. Electron−hole transport dominates electrical conductivity in both wet and dry oxidizing conditions, with total conductivity reaching a value of ∼0.5 S cm−1 for the x = 1 end-member in dry air at 1173 K. Higher electrical conductivity and the displacement of oxygen loss to higher temperatures with increasing Pr content both reflect the role of Pr in promoting hole formation at the expense of oxygen vacancies. In more reducing conditions (N2) and at low Pr contents, conductivity is higher in humidified atmospheres (∼0.023 atm pH2O) indicating a protonic contribution to transport, whereas the greater electron−hole conductivity with increasing Pr content results in lower conductivity in humidified N2 due to the creation of protonic defects and the consumption of holes.