Skip to main content

FOTOCONVERSION DE CO2 A COMBUSTIBLES SOLARES UTILIZADO MATERIALES MULTIFUNCIONALES

ENE2016-79608-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACION IMDEA ENERGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A highly conductive nanostructured PEDOT polymer confined into the mesoporous MIL-100(Fe)

  • Salcedo-Abraira, Pablo
  • Santiago-Portillo, Andrea
  • Bordet, Pierre
  • Salles, Fabrice
  • Guillou, Nathalie
  • Elkaim, Erik
  • Horcajada, Patricia
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Despite the higher efficiency, larger color range and faster stimulus response of polymeric electrochromic materials, their poor cyclability strongly hampers their application in optoelectronics. As an original strategy to stabilize and further nanostructure these polymers, herein an efficient encapsulation and in situ polymerization inside highly porous metal-organic frameworks (MOFs) is reported. In particular, the successful accommodation of poly(3,4-ethylendioxythiophene) (PEDOT) and its partially oxidized polarons inside the mesopores of the nontoxic iron trimesate MIL-100(Fe) is convincingly proved by a large panel of experimental techniques. Remarkably, the polymer-MOF interaction occurring for entrapped PEDOT within the pores (deeply assessed by experimental and simulation methods) might be responsible for the enhanced electrical conductivity of the resulting PEDOT@MIL-100(Fe) composite when compared to the insulating MIL-100(Fe) and the conductive free PEDOT. Furthermore, it was possible to observe the electrochromic properties of the PEDOT@MIL-100(Fe) composite, achieving an improved stability and good cyclability as a consequence of the effective protection by the MOF matrix., This work was supported by a 2017 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation (IN[17]_CBB_QUI_0197). The work was also partially supported by IMDEA Energy and Raphuel project (ENE2016-79608-C2-1-R, MINECOAEI/FEDER, UE). PH acknowledges the Spanish Ramon y Cajal Programme (grant agreement no. 2014-16823). S. N. thanks the Spanish Ministerio de Educacion, Cultura y Deporte for Jose Castillejo mobility programme (CAS14/00067) and financial support by Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016). We also thank the synchrotron Soleil for providing access to the Cristal beamline.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Regioselectivity in Pyrene-Templated Polymerization Using MOFs as 1D Porous Scaffolds

  • Armani-Calligaris, Giacomo
  • Carrasco, Sergio
  • Martineau-Corcos, Charlotte
  • Ávila, David
  • O'Shea, Víctor A.
  • Salles, Fabrice
  • Horcajada, Patricia
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Physicochemical properties of polymers strongly depend on the arrangement and distribution of attached monomers. Templated polymerization using porous crystalline materials appears as a promising route to gain control on the process. Thus, we demonstrate here the potential of metal-organic frameworks as scaffolds with a versatile and very regular porosity, well adapted for the regioselective oxidative polymerization of pyrene. This photoresponsive monomer was first encapsulated within the one-dimensional (1D) microporosity of the robust zirconium(IV) carboxylate metal-organic framework (MOF) (MIL-140D) to, later, undergo in situ oxidative polymerization, enabling the growth of a highly selective polypyrene (PPyr) regioisomer over other potential polymer configurations. To confirm the polymerization and the geometry control of pyrene, the resulting composites were exhaustively characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N-2 sorption measurements, scanning transmission electron microscopy coupled with energy-dispersive X-ray (STEM-EDX) spectroscopy, and fluorescence spectroscopy. Among others, photoluminescence quenching and emission shift in the solid state demonstrated the presence of PPyr inside the MOF porosity. Furthermore, an in-depth joint analysis combining solid-state, magic-angle spinning (MAS) H-1 and C-13 NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS), and molecular simulations (grand canonical Monte Carlo (GCMC) and density functional theory (DFT)) allowed the elucidation of the spatial, host-guest interactions driving the polymerization reaction., The work has been supported by the 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation (ref: IN[17] CBB_QUI_0197). The Foundation accepts no responsibility for the opinions, statements, and contents included in the project and/or the results thereof, which are entirely the responsibility of the authors. This work was also supported by M-ERA.net (2019, C-MOF.cell, MCI/AEI/FEDER, UE) and the Maria de Maeztu excellence label (CEX2019-000931-M) funded by MCIN/AEI/10.13039/501100011033. G.A.-C. thanks the FPI fellowship (BES-2017-082749) associated with the Raphuel project (ENE2016-79608-C2-1-R, MINECOAEI/FEDER, UE). Finally, we would like to thank Christian Sanchez and Laura Garcia from the Central laboratories at IMDEA Energy for their valuable help in the ICP-OES optimization and the team from the proteomics facility of the SCSIE University of Valencia (Spain) for the useful comments on the MALDI-TOF results; this proteomics laboratory is a member of Proteored. S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Semiconducting Bi2O2(C4O4) Coordination Polymer Showing a Photoelectric Response

  • Babaryk, Artem A.
  • Contreras Almengor, Oscar R.
  • Horcajada, Patricia
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Inorganic semiconductors are extensively considered to be among the most promising materials to convert solar light into electricity or chemical energy owing to their efficiency in the separation of photoinduced electron/hole. Bismuth oxides, and, in particular, those built up of [Bi2O2](2+) layers, show an efficient charge separation and, thus, high photocatalytic activities. To explore a possible synergetic effect of bismuth metallic nodes combined with the electron-rich linker squarate, Bi2O2(C4O4) or IEF-3 (an IMDEA Energy framework) was hydrothermally prepared and adequately characterized. As determined from the X-ray structure, [Bi2O2](2+) layers are interconnected by squarate ligands, having a pronounced effect of the 6s(2) lone pair on the bismuth local environment. IEF-3 shows high thermal and chemical robustness at industrially relevant model aggressive media. A large panel of physicochemical methods were applied to recognize IEF-3 as an UV-absorbing n-type semiconductor, showing a photocurrent response comparable to that of alpha-Bi2O3, offering further possibilities for tuning its electrochemical properties by modifying the ligand. In this way, the well-known compositional and structural versatility of coordination polymers may be applied in the future to fine-tune metal-organic semiconductor systems., The authors acknowledge Ra-Phuel (Grant ENE2016-79608-C2-1-R), Ramon y Cajal Grant RYC-2014-15039 (Ministerio de Ciencia, Investigacion y Universidades), and Fundacion Ramon Areces (H + MOFs) for financial support. S.N. is thankful for financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovacion y Universidades project (Project RTI2018-099482-A-I00), and Generalitat Valenciana grupos de investigacion consolidables 2019 (ref: AICO/2019/214) project. H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa SEV2016 and RTI2018-890237-CO2-1), and Generalitat Valenciana (Prometeo 2017/083) is also gratefully acknowledged.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Aqueous Stable Gold Nanostar/ZIF‐8 Nanocomposites for Light‐Triggered Release of Active Cargo Inside Living Cells

  • Carrillo Carrión, Carolina
  • Martínez González, Raquel
  • Navarro Poupard, María Fernanda
  • Pelaz García, Beatriz
  • Polo Tobajas, Ester
  • Arenas-Vivo, Ana
  • Olgiati, Alessandro
  • Taboada Antelo, Pablo
  • Soliman, Mahmoud G.
  • Catalán, Úrsula
  • Fernández-Castillejo, Sara
  • Solà, Rosa
  • Parak, Wolfgang J.
  • Horcajada, Patricia
  • Álvarez-Puebla, Ramón A.
  • Pino González de la Higuera, Pablo Alfonso del
A plasmonic core–shell gold nanostar/zeolitic‐imidazolate‐framework‐8 (ZIF‐8) nanocomposite was developed for the thermoplasmonic‐driven release of encapsulated active molecules inside living cells. The nanocomposites were loaded, as a proof of concept, with bisbenzimide molecules as functional cargo and wrapped with an amphiphilic polymer that prevents ZIF‐8 degradation and bisbenzimide leaking in aqueous media or inside living cells. The demonstrated molecule‐release mechanism relies on the use of near‐IR light coupled to the plasmonic absorption of the core gold nanostars, which creates local temperature gradients and thus, bisbenzimide thermodiffusion. Confocal microscopy and surface‐enhanced Raman spectroscopy (SERS) were used to demonstrate bisbenzimide loading/leaking and near‐IR‐triggered cargo release inside cells, thereby leading to DNA staining
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

GraftFast surface engineering to improve MOF nanoparticles furtiveness

  • Giménez Marqués, Mónica
  • Bellido, Elena
  • Berthelot, Thomas
  • Simón Yarza, Teresa
  • Hidalgo, Tania
  • Simón Vázquez, Rosana
  • González Fernández, Maria Africa
  • Ávila, José
  • Asensio, María Carmen
  • Gref, Ruxandra
  • Couvreur, Patrick
  • Serre, Christian
  • Horcajada, Patricia
Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL-100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high-resolution soft X-ray spectroscopy. Finally, a cell penetration study using the radio-labeled antitumor agent gemcitabine monophosphate (3H-GMP)-loaded MIL-100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness., Agence Nationale de la Recherche | Ref. ANR‐10‐LABX‐0035, Agencia Estatal de Investigación | Ref. ENE2016-79608-C2-1-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Facile Synthesis of Blue Luminescent [7]Helicenocarbazoles Based on Gold-Catalyzed Rearrangement-Iodonium Migration and Suzuki–Miyaura Benzannulation Reactions

  • Alcaide, Benito
  • Almendros, Pedro
  • Aragoncillo, Cristina
  • Busto, Eduardo
  • López-Calixto, Carmen G.
  • Liras, Marta
  • Peña O'Shea, Víctor A. de la
  • García-Sánchez, Alba
  • Stone, H. V.
New azahelicenes having interesting photophysical properties have been prepared in a four-step sequence. These [7]helicenocarbazoles are efficient blue luminophores, demonstrating the utility of gold catalysis in the preparation of advanced materials., Support for this work by the MINECO and FEDER (Projects CTQ2015-65060-C2-1-P, CTQ2015-65060-C2-2-P, and ENE2016- 79608-C2-1-R) is gratefully acknowledged. M.L. thanks MINECO and European Social Fund for a Ramjn y Cajal contract (RyC- 2015-18677). The authors would like to thank V. de la Camara for preliminary studies and Dr. M. Pintado (IQOG-CSIC) for the acquisition of HPLC chromatograms, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The crystal structure of visible light absorbing piezoelectric semiconductor SrNb2V2O11 revisited: high-resolution X-ray diffraction, vibrational spectroscopy and computational study

  • Odynets, Ievgen V.
  • Khainakov, Sergei
  • García-Granda, Santiago
  • Gumeniuk, Roman
  • Zschornak, Matthias
  • Soloviova, Natalia
  • Slobodyanik, Nikolay S.
  • Horcajada, Patricia
  • Babaryk, Artem A.
Ferroelectric materials have a long-term track record of applications in electronics due to their spontaneous electric polarization. This property can be coupled with photoabsorption properties, resulting in a bulk photoelectric effect, the new on-the-edge domain for ferroelectric use. In this sense, considering the low bandgap of binary strontium-niobium ortho-vanadate SrNb2V2O11, which has recently been reported as ferroelectric, we propose here a deep experimental and computational understanding of its structural and physical properties, considered relevant for further applications. Microcrystalline SrNb2V2O11 was prepared by a conventional solid state route, proposing a synthetic pathway deduced from thermoanalytical observations and high-temperature powder X-ray diffraction. The crystal structure (space group Cc, a = 18.15415(2) Å, b = 5.52811(6) Å, c = 9.52728(1) Å, β = 99.8033(8)°, Z = 2), successfully solved using high resolution powder X-ray diffraction, reveals the presence of distorted perovskite-like [Nb4V2O12] units when preparing [Nb2V2O11] sheets. By application of symmetry adapted mode analysis, the non-centrosymmetry originates from Sr atom displacements and [Nb4V2O12] unit “breathing” deformations, which can be explained in terms of the group–subgroup relationship. By ground state analysis of the polytypes across possible C-centered monoclinic cells, only the present experimentally based structural model (space group Cc) can be adopted, substituting the so far reported crystallographic data. The semiconducting nature of the phase, with a direct bandgap of 2.3 eV, was determined by optical absorption measurements and confirmed computationally. By coupling Raman spectroscopy and density functional perturbation theory, the dielectric properties (εriso = 55) were accurately calculated and the observed optical phonons were fully interpreted. Finally, using the Berry phase formalism, we predicted a value of spontaneous polarization of 16.6 μC cm−2 in the absence of confident existing experimental data., Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. S. K., S. G. G. and A. B. B. acknowledge the financial support from Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R). P. H. and A. A. B. are indebted to the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7/2007-2013) under REA grant agreement no. 291803. This work is partially supported by the ICDD GiA #12-02 “Patterns of inorganic oxides and salts based on oxoanions” and Raphuel (ENE2016-79608-C2-1-R) project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unravelling the effect of charge dynamics at the plasmonic metal/semiconductor interface for CO2 photoreduction

  • Collado, Laura
  • Reynal, Anna
  • Fresno, Fernando
  • Barawi, Mariam
  • Escudero, Carlos
  • Perez-Dieste, Virginia
  • Coronado, Juan M.
  • Serrano, David P.
  • Durrant, James R.
  • Peña O'Shea, Víctor A. de la
[EN] Sunlight plays a critical role in the development of emerging sustainable energy conversion and storage technologies. Light-induced CO2 reduction by artificial photosynthesis is one of the cornerstones to produce renewable fuels and environmentally friendly chemicals. Interface interactions between plasmonic metal nanoparticles and semiconductors exhibit improved photoactivities under a wide range of the solar spectrum. However, the photoinduced charge transfer processes and their influence on photocatalysis with these materials are still under debate, mainly due to the complexity of the involved routes occurring at different timescales. Here, we use a combination of advanced in situ and time-resolved spectroscopies covering different timescales, combined with theoretical calculations, to unravel the overall mechanism of photocatalytic CO2 reduction by Ag/TiO2 catalysts. Our findings provide evidence of the key factors determining the enhancement of photoactivity under ultraviolet and visible irradiation, which have important implications for the design of solar energy conversion materials., This work has received funding from the European Research Council (ERC), within the projects Intersolar (291482) and HyMAP programme (648319) under the European Union’s Horizon 2020 research and innovation programme. The results reflect only the authors’ view and the Agency is not responsible for any use that may be made of the information they contain. V.A.P.O. thanks funding from the Spanish Ministry of Economy and Competitiveness (project ENE2016-79608-C2-1-R). A.R. acknowledges the European Commission Marie Curie CIG. M.B. acknowledges the Juan de la Cierva Formación program: FJCI-2016-30567, V.A.P.O. acknowledges support from the Centre of Supercomputacio de Catalunya (CESCA) and to ALBA Cells Synchrotron facilities. Authors thank Dr. Xiaoe Li for assistance in TiO2 films preparation. Support from the Repsol Technology Centre in gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fundamental Insights into Photoelectrocatalytic Hydrogen Production with a Hole-Transport Bismuth Metal–Organic Framework

  • García-Sánchez, Alba
  • Gómez-Mendoza, Miguel
  • Barawi, Mariam
  • Villar-Garcia, Ignacio J.
  • Liras, Marta
  • Gándara Barragán, Felipe
  • Peña O'Shea, Víctor A. de la
[EN] Solar fuels production is a cornerstone in the development of emerging sustainable energy conversion and storage technologies. Light-induced H2 production from water represents one of the most crucial challenges to produce renewable fuel. Metalorganic frameworks (MOFs) are being investigated in this process, due to the ability to assemble new structures with the use of suitable photoactive building blocks. However, the identification of the reaction intermediates remains elusive, having negative impacts in the design of more efficient materials. Here, we report the synthesis and characterization of a new MOF prepared with the use of bismuth and dithieno[3,2-b:2',3'-d]thiophene-2,6-dicarboxylic acid (DTTDC), an electron-rich linker with hole transport ability. By combining theoretical studies and time-resolved spectroscopies, such as core hole clock and laser flash photolysis measurements, we have completed a comprehensive study at different time scales (fs to-ms) to determine the effect of competitive reactions on the overall H2 production. We detect the formation of an intermediate radical anion upon reaction of photogenerated holes withan electron donor, which plays a key role in the photoelectrocatalytic processes. These results shed new light on the use of MOFs for solar fuel production., This work was supported by the EU (ERC CoG HyMAP 648319) and Spanish MCIU, Ra-Phuel (ENE2016-79608-C2-1-R), SOLPAC (ENE2017-89170-R) FOTOFUEL (ENE2016-82025-REDT) and CTQ2017-87262-R (MCIU/AEI/FEDER, UE). We thank "Comunidad de Madrid" and European Structural Funds for their financial support to FotoArt-CM project (S2018/NMT-4367). F.G., M. L and M. B thank to MINECO and European Social Fund for a Ramón y Cajal contract (RyC-2015-18384, RyC-2015-18677) and Juan de la Cierva Formación contract (FJCI-2016-30567), respectively. We thank Diamond Facilities for the access to synchrotron radiation and CESCA for computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding Charge Transfer Mechanism on Effective Truxene-Based Porous Polymers–TiO2 Hybrid Photocatalysts for Hydrogen Evolution

  • Valverde-Gónzález, Antonio
  • López Calixto, Carmen G.
  • Barawi, Mariam
  • Gómez- Mendoza, Miguel
  • de la Peña O’Shea, Víctor A.
  • Liras, Marta
  • Gómez-Lor, Berta
  • Iglesias, Marta
[EN] Truxene-based porous polymers synthesized through the simple “solvent knitting” strategy from hexamethyl or tribenzyl truxene-based monomers (TxPP1 and TxPP2), and their corresponding TxPP@TiO2 hybrids are used as photocatalysts for H2 production from water using methanol as sacrificial agent, under UV-Vis light. These polymers present higher hydrogen evolution rate (HER) than TiO2, and remarkable thermo- and photo-stabilities. Hybrids TxPP-TiO2 exhibited intensely enhanced photocatalytic activity compared to TiO2 or TxPPs alone. In the presence of platinum (1%) as cocatalyst, HER from TxPP1@T-10 significantly boosted reaching values above 21000 μmol.g-1.h-1 which to the best of our knowledge, represents the highest HER reported for hybrids based on TiO2 and conjugated porous polymers. Interestingly, small structural differences of the corresponding truxene monomers result in different photocatalytic behavior. We focused here on gaining insight on the charge transfer mechanism and rationalizing the different photocatalytic performances in order to establish clear structure-activity relationships. In fact, photoluminescence and transient absorption spectroscopy demonstrated that the remarkably enhanced photocatalytic activity of the most active hybrids (TxPP1@TiO2) can be attributed to the efficiently photogenerated electron-hole separation by a direct Z-scheme mechanism, while lower performance of TxPP2@TiO2, is probably due to a less efficient heterojunction type II charge transfer mechanism., Authors acknowledge to MINECO/AEI/FEDER, UE of Spain (Projects MAT2017-82288-C2-2-P, CTQ2016-78557-R and ENE2016-79608-C2-1-R) and regional government of “Comunidad de Madrid” and European Structural Funds for their financial support to FotoArt-CM project (S2018/NMT-4367). AVG thanks Ministerio de Educación y Formación Profesional for FPU17/03463, M. L and M. B thank to MINECO and European Social Fund for a Ramón y Cajal grant (RyC-2015-18677) and Juan de la Cierva Formación grant (FJCI-2016-30567) respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly efficient multi-metal catalysts for carbon dioxide reduction prepared from atomically sequenced metal organic frameworks

  • Castillo-Blas, Cecilia
  • Álvarez Galván, María Consuelo
  • Puente-Orench, Inés
  • García-Sánchez, Alba
  • Oropeza, Freddy E.
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Peña O'Shea, Víctor A. de la
  • Gándara Barragán, Felipe
The precise control on the combination of multiple metal atoms in the structure of metal-organic frameworks (MOFs) endowed by reticular chemistry, allows the obtaining of materials with compositions that are programmed for achieving enhanced reactivity. The present work illustrates how through the transformation of MOFs with desired arrangements of metal cations, multi-metal spinel oxides with precise compositions can be obtained, and used as catalyst precursor for the reverse water-gas shift reaction. The differences in the spinel initial composition and structure, determined by neutron powder diffraction, influence the overall catalytic activity with changes in the process of in situ formation of active, metal-oxide supported metal nanoparticles, which have been monitored and characterized with in situ X-ray diffraction and photoelectron spectroscopy studies., Work at Instituto de Ciencia de Materiales de Madrid–Consejo Superior de Instigaciones Científicas (CSIC) has been supported by the Spanish Research Agency (Agencia Estatal de Investigación, AEI), Projects MAT2016-78465-R and CTQ2017-87262-R. This work was supported by the EU (ERC CoG HyMAP 648319) and Spanish MINECO (ENE2016-79608-C2-1-R). Authors also wish to thank to “Comunidad de Madrid” and European Structural Funds for their financial support to FotoArt-CM project (S2018/NMT-4367). F. G. acknowledges financial support from MINECO Ramón y Cajal program (RyC-2015-18384)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Semiconducting Bi2O2(C4O4) Coordination Polymer Showing a Photoelectric Response

  • Babaryk, Artem A.
  • Contreras Almengor, O.R
  • Cabrero-Antonino, María
  • Navalón, Sergio
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
Inorganic semiconductors are extensively considered to be among the most promising materials to convert solar light into electricity or chemical energy owing to their efficiency in the separation of photoinduced electron/hole. Bismuth oxides, and, in particular, those built up of [BiO] layers, show an efficient charge separation and, thus, high photocatalytic activities. To explore a possible synergetic effect of bismuth metallic nodes combined with the electron-rich linker squarate, BiO(CO) or IEF-3 (an IMDEA Energy framework) was hydrothermally prepared and adequately characterized. As determined from the X-ray structure, [BiO] layers are interconnected by squarate ligands, having a pronounced effect of the 6s lone pair on the bismuth local environment. IEF-3 shows high thermal and chemical robustness at industrially relevant model aggressive media. A large panel of physicochemical methods were applied to recognize IEF-3 as an UV-absorbing n-type semiconductor, showing a photocurrent response comparable to that of α-BiO, offering further possibilities for tuning its electrochemical properties by modifying the ligand. In this way, the well-known compositional and structural versatility of coordination polymers may be applied in the future to fine-tune metal-organic semiconductor systems., The authors acknowledge Ra-Phuel (Grant ENE2016-79608-C2-1-R), Ramón y Cajal Grant RYC-2014-15039 (Ministerio de Ciencia, Investigación y Universidades), and Fundación Ramón Areces (H + MOFs) for financial support. S.N. is thankful for financial support by the Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovación y Universidades project (Project RTI2018-099482-A-I00), and Generalitat Valenciana grupos de investigación consolidables 2019 (ref: AICO/2019/214) project. H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa SEV2016 and RTI2018-890237-CO2-1), and Generalitat Valenciana (Prometeo 2017/083) is also gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Regioselectivity in Pyrene-Templated Polymerization Using MOFs as 1D Porous Scaffolds

  • Armani-Calligaris, Giacomo
  • Carrasco, Sergio
  • Atienzar, Pedro
  • Navalón, Sergio
  • Martineau-Corcos, Charlotte
  • Ávila, David
  • Peña O'Shea, Víctor A. de la
  • García Gómez, Hermenegildo
  • Salles, Fabrice
  • Horcajada, Patricia
Physicochemical properties of polymers strongly depend on the arrangement and distribution of attached monomers. Templated polymerization using porous crystalline materials appears as a promising route to gain control on the process. Thus, we demonstrate here the potential of metal-organic frameworks as scaffolds with a versatile and very regular porosity, well adapted for the regioselective oxidative polymerization of pyrene. This photoresponsive monomer was first encapsulated within the one-dimensional (1D) microporosity of the robust zirconium(IV) carboxylate metal-organic framework (MOF) (MIL-140D) to, later, undergo in situ oxidative polymerization, enabling the growth of a highly selective polypyrene (PPyr) regioisomer over other potential polymer configurations. To confirm the polymerization and the geometry control of pyrene, the resulting composites were exhaustively characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N sorption measurements, scanning transmission electron microscopy coupled with energy-dispersive X-ray (STEM-EDX) spectroscopy, and fluorescence spectroscopy. Among others, photoluminescence quenching and emission shift in the solid state demonstrated the presence of PPyr inside the MOF porosity. Furthermore, an in-depth joint analysis combining solid-state, magic-angle spinning (MAS) H and C NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS), and molecular simulations (grand canonical Monte Carlo (GCMC) and density functional theory (DFT)) allowed the elucidation of the spatial, host-guest interactions driving the polymerization reaction., The work has been supported by the 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation (ref: IN[17] CBB_QUI_0197). The Foundation accepts no responsibility for the opinions, statements, and contents included in the project and/or the results thereof, which are entirely the responsibility of the authors. This work was also supported by M-ERA.net (2019, C-MOF.cell, MCI/AEI/FEDER, UE) and the Maria de Maeztu excellence label (CEX2019-000931-M) funded by MCIN/AEI/10.13039/501100011033. G.A.-C. thanks the FPI fellowship (BES-2017-082749) associated with the Raphuel project (ENE2016-79608-C2-1-R, MINECOAEI/FEDER, UE). Finally, we would like to thank Christian Sánchez and Laura García from the Central laboratories at IMDEA Energy for their valuable help in the ICP-OES optimization and the team from the proteomics facility of the SCSIE University of Valencia (Spain) for the useful comments on the MALDI-TOF results; this proteomics laboratory is a member of Proteored. S.N. thanks the support received from Grant PID2021–123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
Docta Complutense
Publication Artículo científico (JournalArticle)

Ultrafast Reproducible Synthesis of a Ag-nanocluster@MOF Composite and its Superior Visible-Photocatalytic Activity in Batch and in Continuous Flow

  • Arenas Vivo, Ana
  • Rojas, Sara
  • Ocaña, Iván
  • Torres, Ana
  • Liras, Marta
  • Salles, Fabrice
  • Arenas Esteban, Daniel
  • Bals, Sara
  • Ávila Brande, David
  • Horcajada, Patricia
The (photo)catalytic properties of metal–organic frameworks (MOFs) can be enhanced by post-synthetic inclusion of metallic species in their porosity. Due to their extraordinarily high surface area and well defined porous structure, MOFs can be used for the stabilization of metal nanoparticles with adjustable size within their porosity. Originally, we present here an optimized ultrafast photoreduction protocol for the in situ synthesis of tiny and monodisperse silver nanoclusters (AgNCs) homogeneously supported on a photoactive porous titanium carboxylate MIL-125-NH2 MOF. The strong metal–framework interaction between –NH2 and Ag atoms influences the AgNC growth, leading to the surfactant-free efficient catalyst AgNC@MIL-125-NH2 with improved visible light absorption. The potential use of AgNC@MIL-125-NH2 was further tested in challenging applications: (i) the photodegradation of the emerging organic contaminants (EOCs) methylene blue (MB-dye) and sulfamethazine (SMT-antibiotic) in water treatment, and (ii) the catalytic hydrogenation of p-nitroaniline (4-NA) to p-phenylenediamine (PPD) with industrial interest. It is noteworthy that compared with the pristine MIL-125-NH2, the composite presents an improved catalytic activity and stability, being able to photodegrade 92% of MB in 60 min and 96% of SMT in 30 min, and transform 100% of 4-NA to PPD in 30 min. Aside from these very good results, this study describes for the first time the use of a MOF in a visible light continuous flow reactor for wastewater treatment. With only 10 mg of AgNC@MIL-125-NH2, high SMT removal efficiency over 70% is maintained after >2 h under water flow conditions found in real wastewater treatment plants, signaling a future real application of MOFs in water remediation.