Skip to main content

ANALISIS DEL IMPACTO TERMODINAMICO DE LA ESCASEZ DE MATERIALES EN TECNOLOGIAS LIMPIAS Y EFICIENTES

ENE2017-85224-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Is the future development of wind energy compromised by the availability of raw materials?

  • Gonzalez, E.
  • Ortego, A.
  • Topham, E.
  • Valero, A.
The installation of new electrical power plants from renewable sources is key in the transition towards a low-carbon economy. An important amount of diverse raw materials is required for this development. Due to its current prominence among renewable energy sources, we assess the expected development of wind energy towards the availability of the required raw materials up to 2050. Wind power is found to be in a favourable position, over solar thermal and photovoltaic power. Among the two main wind turbine technologies, the installation of direct drive turbines with permanent magnets faces a more challenging future. Recycling is an important strategy to simultaneously reduce risks and costs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Avoided energy cost of producing minerals: The case of iron ore

  • Palacios, J.L.
  • Fernandes, I.
  • Abadias, A.
  • Valero, A.
  • Valero, A.
  • Reuter, M.A.
There is growing concern about the decline of the ore grade in mines and the increased energy usage for processing and refining metals. In the limit, where no concentrated deposits exist, minerals must be obtained from bare rock. A method for quantitatively assessing the “free bonus” granted by nature in providing concentrated minerals in mines and thus assessing the quality of the different resources is estimating how much energy is needed to concentrate the minerals, as they are already in mines, from bare rock. This bonus granted by nature reduces the costs of human mining and metallurgical processes, as well as the mining effort required of future generations. In this study, the concentration of high-iron-content minerals in common rocks was investigated via a computational model developed using the HSC software. As expected, the range of results for the specific energy for the concentration of iron from common rocks was considerably higher than the energy required by modern processes. This reveals the need to value current iron deposits and the challenge of developing sustainable methods of metal production to satisfy the needs of the present and future generations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Global material requirements for the energy transition. An exergy flow analysis of decarbonisation pathways

  • Valero, Alicia
  • Valero, Antonio
  • Calvo, Guiomar
  • Ortego, Abel
  • Ascaso, Sonia
  • Palacios, José Luis
Moving towards a low-carbon economy will imply a considerable increase in the deployment of green technologies, which will in turn increase the demand of certain raw materials. In this paper, the material requirements for 2050 scenarios are assessed in terms of exergy to analyze the impact in natural resources in each scenario and identify which technologies are going to demand more resources. Renewable energy technologies are more mineral intensive than current energy sources. Using the International Energy Agency scenarios, from 2025 to 2050, total raw material demand is going to increase by 30%, being the transport sector the one that experiences the highest increase. Aluminum, iron, copper and potassium are those elements that present a higher share of the material needs for green technologies. Besides, there are five elements that experience at least a six-fold increase in demand in that period: cobalt, lithium, magnesium, titanium and zinc. Comparing those results with Greenpeace's AE [R] scenario, which considers a 100% renewable supply by 2050, this increase is even higher. Therefore, avoiding the dependency on fossil fuels will imply to accept the dependency on raw materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermodynamic Rarity and Recyclability of Raw Materials in the Energy Transition: The Need for an In-Spiral Economy

  • Valero, Antonio
  • Valero, Alicia
This paper presents a thermodynamic vision of the depletion of mineral resources. It demonstrates how raw materials can be better assessed using exergy, based on thermodynamic rarity, which considers scarcity in the crust and energy requirements for extracting and refining minerals. An exergy analysis of the energy transition reveals that, to approach a decarbonized economy by 2050, mineral exergy must be greater than that of fossil fuels, nuclear energy, and even all renewables. This is because clean technologies require huge amounts of many different raw materials. The rapid exhaustion of mines necessitates an increase in recycling and reuse, that is, a “circular economy”. As seen in the automobile industry, society is far removed from closing even the first cycle, and absolute circularity does not exist. The Second Law dictates that, in each cycle, some quantity and quality of materials is unavoidably lost (there are no circles, but spirals). For a rigorous recyclability analysis, we elaborate the exergy indicators to be used in the assessment of the true circularity of recycling processes. We aim to strive toward an advanced economy focused on separating techniques and promoting circularity audits, an economy that inspires new solutions: an in-spiral economy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Resumen y análisis crítico del informe especial de la Agencia Internacional de la Energía: El Rol de los minerales críticos en la transición hacia energías limpias

  • Valero Capilla, Antonio
  • Valero Delgado, Alicia
  • Calvo Sevillano, Guiomar
This paper makes a critical review of the IEA’s report entitled The Role of Critical Minerals in Clean Energy Transitions. The main goal of this report is to identify key minerals and metals that could generate supply problems and bottlenecks in a clean energy transition. The IEA establishes a series of key recommendations towards mineral security, analysing the amount of different materials used in certain technologies (electric cars, solar PV, onshore and offshore wind, nuclear, coal, and natural gas). Such recommendations include, among others, ensuring adequate investment in diversified sources of new supply, the promotion of technology innovation or strategic stockpiling. This report is an essential step towards awareness rising about this issue, because until recently it had not received the attention it deserved. However, it falls short on the impact that mineral scarcity can have on the development of economies and the planet. For this reason, we analyse section by section the report and provide some additional comments on aspects that could be further addressed to avoid replacing fossil fuel addiction with raw materials dependence.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mining energy consumption as a function of ore grade decline: the case of lead and zinc

  • Magdalena, R.
  • Valero, A.
  • Palacios, J. L.
  • Valero, A.
Demand for raw materials is increasing exponentially. To satisfy that demand, more minerals need to be mined from the Earth’s crust. As a result, minerals are being exhausted, and ore grades decline. Lower ore grade mines also mean more energy, which in turn entails fossil fuel emissions and more climate change. This paper estimates the specific energy for the beneficiation process of metals lead and zinc as case studies. The evaluation is performed with specialized software, HSC Chemistry which assesses the specific energy for every stage: comminution, flotation, and refining. Different scenarios have been established to simulate the behavior of a mine when it approaches depletion. Preliminary results show that energy consumption for lead would increase by five times when compared to the current situation if ore grades decrease until the level of tailings, while for zinc by almost two.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Strategic mineral resources: availability and future estimations for the renewable energy sector

  • Calvo, G.
  • Valero, A.
To keep the increase in global average temperature below 2 °C the use of renewable energy sources is essential. There are various scenarios for this energy transition depending on the amounts and types of renewable energies implemented. However, the material requirements to build new renewable power systems is rarely considered. It is key to understand the impact that the increasing demand of materials for renewable technologies could have on mining and mineral availability and so avoid potential disruptions. Thirteen strategic elements for the renewable energy sector have been analyzed which could generate supply shortages in the medium to long term. From the supply side, production, current resources and data related to future production have been compiled. From the demand side, element use in solar power (PV and CSP), wind energy (on and off-shore), and electric vehicles have been analyzed, as well as the demand of each element in other sectors from 2018 to 2050. Of the 13 elements included in this study, cobalt, lithium, tellurium, and nickel are the most critical of all. Technologies should be more effective in their use. Governments and companies should incorporate policies related to the conservation and extension of its life through recycling and servitisation to avoid resource depletion. © 2021 Elsevier B.V.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Assessment of strategic raw materials in the automobile sector

  • Ortego, Abel
  • Calvo, Guiomar
  • Valero, Alicia
  • Iglesias-Émbil, Marta
  • Valero, Antonio
  • Villacampa, Mar
A conventional passenger car demands almost 50 different types of metals, along other raw materials. Some of these metals, such as tantalum, indium, niobium or rare earths elements, are considered critical by the European Commission and many other institutions. Additionally, their functional recycling is practically absent. The transition to fully electric vehicles will require more electrical and electronic devices, motors and batteries, that will need an increasing amount of critical metals. A methodology has been developed to identify strategic elements for the automobile sector. This approach defines a variable called Strategic Metal Index (SMI) which is calculated for each metal. This index is the result of combining the following parameters: (1) Automobile sector demand with respect to world production; (2) known resources compared to total cumulative demand and (3) Supply risk. The index has been applied to 50 metals used by different types of vehicle powertrains. The assessment covers metal demand from 2018 to 2050 according to vehicle sales projections. Using this approach, the most strategic elements for the automobile manufacturing sector are Ni, Li and Co (used in batteries), Nd and Dy (permanent magnets), Tb (lighting and fuel injectors), Sb, Bi and and B (steel alloys, paintings), Au and Ag (electronics), In (screens) and Te (steel alloys, electronics). The search for substitutes, implementation of eco-design measures and the increase of the functional recyclability of these elements should be strongly encouraged in the sector.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Material bottlenecks in the future development of green technologies

  • Valero, A.
  • Valero, A.
  • Calvo, G.
  • Ortego, A.
Decarbonizing world economies implies the deployment of “green technologies”, meaning a renovation of the energy sector towards using renewable sources and zero emission transport technologies. This renovation will require huge amounts of raw materials, some of them with high supply risks. To assess such risks a new methodology is proposed, identifying possible bottlenecks of future demand versus geological availability. This has been applied to the world development of wind power, solar photovoltaic, solar thermal power and passenger electric vehicles for the 2016–2050 time period under a business as usual scenario considering the impact on 31 different raw materials. As a result, 13 elements were identified to have very high or high risk, meaning that these could generate bottlenecks in the future: cadmium, chromium, cobalt, copper, gallium, indium, lithium, manganese, nickel, silver, tellurium, tin and zinc. Tellurium, which is mostly demanded to manufacture solar photovoltaic cells, presents the highest risk. To overcome these constraints, measures consisting on improving recycling rates from 0.1% to 4.6% per year could avoid material shortages or restrictions in green technologies. For instance, lithium recycling rate should increase from 1% to 4.8% in 2050. This study aims to serve as a guideline for developing eco-design and recycling strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Raw material use in a battery electric car – a thermodynamic rarity assessment

  • Iglesias-Émbil, Marta
  • Valero, Alicia
  • Ortego, Abel
  • Villacampa, Mar
  • Vilaró, Josep
  • Villalba, Gara
The transition to full electromobility must be carefully evaluated, as large amounts of strategic metals will be required, for which there is presently little to no recovery or recycling (e.g. gold, silver, tantalum or cobalt). In this study, we perform a comprehensive metal assessment of two passenger cars (conventional and battery electric models) in terms of mass and thermodynamic rarity. Thermodynamic rarity is based on the property of exergy and is defined as “the amount of exergy resources needed to obtain a mineral commodity from average crustal concentration using the best available technology” (measured in kJ). Thus, the thermodynamic rarity approach assigns a greater exergetic value to scarce (understood as having a relative low average crustal concentration) and difficult-to-extract minerals. Of the 60 metals analyzed, almost 50 metals have been identified within the studied cars, representing 800 (conventional) and 1, 200 kg (battery electric), showcasing the fact that a car constitutes a “road mine”. Furthermore, given that the technology behind battery electric cars is in development, three generations of Li-ion batteries were analyzed to study the effect on resource use of a metal changing composition over time. Albeit the battery modules of the three generations present a similar mass content (approximately 70 kgs), the thermodynamic rarity decreases from 275 to 100 Gigajoules, due to the reduced proportion of cobalt, which is by far the most exergetic metal within the battery. Additionally, with the thermodynamic rarity approach, the most exergy intensive parts within a battery electric car have been identified – the high-voltage battery modules, the electric drive, the power module, the charger, the electrical air conditioning compressor and the electromechanical brake servo – providing an indicator facilitating proactive mid- to long-term ecodesign measures and recycling strategies.