Skip to main content

DESARROLLO DE NANOFLUIDOS HIBRIDOS, NANOLUBRICANTES Y MATERIALES DE CAMBIO DE FASE NANO-MEJORADOS PARA LA TRANSFERENCIA, ALMACENAMIENTO Y PRODUCCION DE ENERGIA

ENE2017-86425-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Chemically modified nanomaterials as lubricant additive: time stability, friction, and wear

  • Mariño Fernández, Fátima
  • López Iglesias, Enriqueta
  • Fernández Pérez, Josefa
  • Liñeira del Río, José Manuel
This work reviews the results on the temporal stability of nanodispersions containing chemically modified nanoadditives: carbon-based nanomaterials, metals, metal oxides, metal sulfides, nanocomposites, among others. Morphology, size, coating type and concentration of the NPs as well as the viscosity of the base oil are the main characteristics that affect stability. Coated spherical NPs with mean diameter lower than 20 nm are the most common among those which led to nanolubricants with stabilities longer than two months. The tribological results of the nanolubricants with stabilities higher than one month are also reviewed. Regardless the base oil, chemically modified nanoparticles reduced wear more than friction, reaching reductions of friction up to 75% and wear volume up to 99%. As for the tribological mechanisms involving chemically modified nanoparticles, the formation of adsorbed or tribochemical reaction films on worn surfaces were reported more often
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Experimental investigation of tribological and rheological behaviour of hybrid nanolubricants for applications in internal combustion engines, Río, J.M.L. del, Rial, R., Nasser, K. et al. Experimental Investigation of Tribological and Rheological Behaviour of Hybrid Nanolubricants for Applications in Internal Combustion Engines. Tribol Lett 71, 25 (2023). https://doi.org/10.1007/s11249-023-01697-5

  • Liñeira del Río, José Manuel
  • Rial Silva, Ramón
  • Nasser, Khodor I.
  • García Guimarey, María Jesús
In this study, the improvement in SAE 10W-40 engine oil tribological performance after the addition of magnesium oxide (MgO) nanoadditive and two different phosphonium-based ionic liquids (ILs) was investigated. Besides, the rheological behaviour of MgO-based nanolubricant and IL-based hybrid nanolubricants at the temperature range from 293.15 to 363.15 K was studied. The nanoparticle characterization was performed by means of transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The tribological properties, friction coefficients and wear parameters of the formulated oil modified with 0.01 wt% MgO and 1 wt% ILs compared with the neat 10W-40 oil were performed and analysed using a ball-on-three-pins tribometer and a 3D optical profilometer, respectively. Further analysis on the worn surface was shown by Raman spectroscopy and SEM images illustrating the formation of the protective IL and MgO tribo-films as hybrid additives. In friction tests with sliding steel-steel tribo-pairs, IL3-based hybrid nanolubricant decreased the coefficient of friction and wear volume by 7% and 59%, respectively, in comparison with the neat SAE 10W-40, hence better positive synergies were found for MgO and IL3 as hybrid additives. Interestingly, the thermophysical characterization by rheology also revealed that the nanoparticle and ionic liquids addition did not affect neither the viscosity response nor the Newtonian behaviour of the engine oil, adequately meeting the requirements for their use in internal combustion engines
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Phase change characterization of eco-friendly isopropyl palmitate-based graphene nanoplatelet nanofluid for thermal energy applications

  • Iglesias Prado, José Ignacio
  • Calviño Barreiro, Uxía
  • Lugo Latas, Luis
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Thermal energy storage (TES) facilitates the integration of renewable energy by decoupling production and consumption, mitigating intermittence issues. However, current TES systems use fossil fuel-based products as storage media, so the development of sustainable and efficient materials should be investigated. This work aims to the design and characterization of new eco-friendly nanoenhanced phase change materials (NePCMs) based on dispersions of graphene nanoplatelets of two different lateral sizes (7.2 and 40 μm) in isopropyl palmitate for cold storage applications. The stability of the NePCMs was analysed by dynamic light scattering, selecting Span® 80 as surfactant to improve the stabilization of both nanomaterials within the base material. The influence of the nanoadditive concentration on the temperature transitions and on the solid–liquid phase change were comprehensively studied by differential scanning calorimetry, finding out that the dispersed nanoadditives do not alter the polymorphism of the isopropyl palmitate. Additionally, reductions in the sub-cooling effect higher than 2 K for both nanoplatelets were found, with increases in the latent heat up to 5.9 and 3.9% for the shorter and the longer nanoplatelets, respectively. Isobaric heat capacities were also determined by temperature-modulated differential scanning calorimetry, reporting maximum reductions of 12% compared to the base material., Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21, Agencia Estatal de Investigación | Ref. PDC2021-121225-C21, Agencia Estatal de Investigación | Ref. ENE2017-86425-C2-1-R, Xunta de Galicia | Ref. ED481A-2018/287, Xunta de Galicia | Ref. ED431C 2020/06, Xunta de Galicia | Ref. ED481A-2021/284
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

A new relationship on transport properties of nanofluids. Evidence with novel magnesium oxide based n-tetradecane nanodispersions

  • Iglesias Prado, José Ignacio
  • Pérez Vallejo, Javier
  • Lugo Latas, Luis
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The worldwide increasing of thermal energy consumption fosters new technological solutions based on nanomaterials. The use of nanofluids enhances energy efficiency leading to eco-friendlier devices. Thus, researchers are encouraged to understand how modified thermophysical properties improve heat transfer capability. Magnesium oxide based n-tetradecane nanofluids are designed in terms of stability for cold storage application. Thermal conductivity, viscosity, density, and isobaric heat capacity were determined by transient hot wire, rotational rheometry, mechanical oscillation U-tube, and differential scanning calorimetry. Furthermore, a useful relationship on thermal conductivity and viscosity of nanofluids is proposed based on Andrade, Osida and Mohanty theories. Its reliability is checked with the here reported results and literature data of different nanofluids: titanium oxide within water, silver within poly(ethylene glycol), and aluminium oxide within (1-ethyl-3-methylimidazolium methanesulfonate + water). Similar trends have been found for all nanofluids excepting titanium oxide aqueous nanofluids, this differentiated behaviour being expected by the proposed relationship., Agencia Estatal de Investigación | Ref. ENE2017-86425-C2-1-R, Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21, Agencia Estatal de Investigación | Ref. PDC2021-121225-C21, Xunta de Galicia | Ref. ED431C 2020/06, Xunta de Galicia | Ref. ED481A-2018/287
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Tuning the thermal properties of aqueous nanofluids by taking advantage of size-customized clusters of iron oxide nanoparticles

  • Elsaidy , Amir Hassan Abdelrahman
  • Pérez Vallejo, Javier
  • Salgueiriño Maceira, Verónica
  • Lugo Latas, Luis
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In this study, the thermal conductivity of aqueous nanofluids containing clusters of iron oxide (Fe3O4/γ-Fe2O3) nanoparticles has been investigated experimentally for the first time, with the aim of assessing the role of a controlled aggregation of nanoparticles in these final nanofluids. For that, clusters of iron oxide nanoparticles of different cluster size (46–240 nm diameter range) were synthesized by a solvothermal method and fully characterized by transmission electron microscopy, X-ray diffraction and Raman spectroscopy. The rheological behavior of the optimal nanofluids was also studied by rotational rheometry. The nanofluids were obtained by dispersing the clusters of iron oxide nanoparticles in water taking into account different solid volume fractions (from 0.50 to 1.5 wt%) and the experiments were conducted in the temperature range from 293.15 K to 313.15 K. The study reveals and quantifies enhancements in the thermal conductivity of nanofluid with increase of cluster size and temperature. Furthermore, a 0.50 wt% concentration of clusters of iron oxide nanoparticles within the whole range of proposed nanofluids offers great stability and improved thermal conductivity for heat transfer applications with an small dynamic viscosity increase. In addition, the larger the size of the clusters of iron oxide nanoparticles, the greater the increase in thermal conductivity for the designed Fe3O4/γ-Fe2O3 cluster-based nanofluids, with thermal conductivity values following a constant upward trend and reaching a maximum increase of 4.4% for the largest synthesized clusters (average size of 240 nm). These results open the door for the development of iron oxide-based nanofluids on which taking advantage of an optimized aggregation of nanoparticles by using size-customized clusters, Ministerio de Economía y Competitividad | Ref. ENE2017-86425-C2-1-R, Ministerio de Economía y Competitividad | Ref. CTM2017-84050-R, Ministerio de Ciencia e Innovación | Ref. PID2020-112846RB-C21, Ministerio de Ciencia e Innovación | Ref. PID2020-119242RB-I00, Ministerio de Ciencia e Innovación | Ref. PDC2021-121225-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Thermal and rheological behaviour of stearate-based phase change nanofluids

  • Iglesias Prado, José Ignacio
  • Navarro, María Elena
  • Calviño Barreiro, Uxía
  • Ding, Yulong
  • Lugo Latas, Luis
A comprehensive study has been performed on the thermal and rheological behaviour of two sets of isooctyl stearate (PureTemp 8, PT8) based nanofluids with different concentrations of spherical MgO nanoparticles (up to 15 wt%) and graphene nanoplatelets (up to 2 wt%). The results show that the presence of the nanomaterials does not significantly alter the phase change temperatures of the base fluids, although the latent heat decreases by 27% and 7.6% for 15 wt% MgO and 1.0 wt% GnP-based nanofluids, respectively. Both nanomaterials are found to increase the thermal diffusivity of the nanofluids. GnP-based suspensions have a higher thermal diffusivity than the MgO ones at similar nanomaterial concentrations. Rheological analyses show that MgO-PT8 nanofluids behave as a viscoplastic material (solid at zero shear rate); whereas the GnP-PT8 samples are viscoelastic (liquid at zero shear rate). MgO nanoparticles promote the formation of large fractal agglomerates, leading to a strong gel network of particles within PT8, while platelet-shaped GnP gives a fluid-like behaviour., Agencia Estatal de Investigación | Ref. ENE2017-86425-C2-1-R, Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21, Agencia Estatal de Investigación | Ref. PDC2021-121225-C21, Agencia Estatal de Investigación | Ref. PRE2021-097589, Xunta de Galicia | Ref. ED431C 2020/06, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Experimental methodology to determine thermal conductivity of nanofluids by using a commercial transient hot-wire device

  • Iglesias Prado, José Ignacio
  • Calviño Barreiro, Uxía
  • Lugo Latas, Luis
The lack of a standard experimental procedure to determine thermal conductivity of fluids is noticeable in heat transfer processes from practical and fundamental perspectives. Since a wide variety of techniques have been used, reported literature data have huge discrepancies. A common practice is using manufactured thermal conductivity meters for nanofluids, which can standardize the measurements but are also somewhat inaccurate. In this study, a new methodology to perform reliable measurements with a recent commercial transient hot-wire device is introduced. Accordingly, some extensively studied fluids in the literature (water, ethylene glycol, ethylene glycol:water mixture 50:50 vol%, propylene glycol, and n-tetradecane) covering the range 0.100 to 0.700 W m−1 K−1 were used to check the device in the temperature range 283.15 to 333.15 K. Deviations between the collected data and the theoretical model, and repeatabilities and deviations between reported and literature values, were analyzed. Systematic deviations in raw data were found, and a correction factor depending on the mean thermal conductivity was proposed to operate with nanofluids. Considering all tested effects, the expanded (k = 2) uncertainty of the device was set as 5%. This proposed methodology was also checked with n-hexadecane and magnesium-oxide-based n-tetradecane nanofluids., Ministerio de Ciencia e Innovación | Ref. PID2020-112846RB-C21, Ministerio de Ciencia e Innovación | Ref. PDC2021-121225-C21, Xunta de Galicia | Ref. ED481A-2018/287, Ministerio de Economía y Competitividad | Ref. ENE2017-86425-C2-1-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

An experimental study of novel nanofluids based on deep eutectic solvents (DESs) by Choline chloride and ethylene glycol

  • Jafari, Kimia
  • Hossein Fatemi, Mohammad
  • Lugo Latas, Luis
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In this work, the preparation and characterization of some new nanofluids based on deep eutectic solvents (DESs) consisting of a hydrogen bond acceptor, ethylene glycol (EG), and a hydrogen bond donor, choline chloride (ChCl), as well as water, are presented. The nanofluids were designed by the dispersion of spherical MgO nanoparticles in four different DESs, ChCl:EG (molar ratio of 1:2), 1ChCl:5EG, 1ChCl:2EG:2Water, and 1ChCl:5EG:2Water. The stability of nanofluids was carried out by measuring size distribution for five days, which discovered the best results obtained with nanofluids of dispersed MgO in DES 1ChCl:5EG. Thermophysical properties (thermal conductivity and density) were measured and the influence of nanoparticles’ mass fraction, temperature, and water content all were examined. The acquired outcomes revealed that the trend of density was reducing by increment in temperature since for pure base fluids and DES-based nanofluids 1.3% decrement were recorded, averagely (the decline in density was sharper in the case of DES 1ChCl:5EG and its based nanofluids). The thermal conductivity was almost constant during the range of 283.15–333.15 K. It confirmed that the thermal conductivities of prepared nanofluids based on DESs with water were higher in comparison to the ones based on DESs without water and nanoparticles concentration could promote thermal conductivity. The greatest enhancement was gained at 10 wt% of MgO suspended in DES 1ChCl:2EG. The isobaric thermal expansivity was also determined at different temperatures. Eventually, the general conclusions were drawn and concerning the results, the MgO/DES 1ChCl:2EG 10 wt% nanofluids was introduced as the most efficient., Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21, Agencia Estatal de Investigación | Ref. PDC2021-121225-C21, Agencia Estatal de Investigación | Ref. ENE2017-86425-C2-1-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Thermophysical, rheological and electrical properties of mono and hybrid TiB2/B4C nanofluids based on a propylene glycol: water mixture

  • Pérez Vallejo, Javier
  • Żyła, Gaweł
  • Ansia, Lucas
  • Fal, Jacek
  • Traciak, Julian
  • Lugo Latas, Luis
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Hybrid nanofluids aim to further improve the characteristics of mono nanofluids. However, experimental studies that jointly explore the physical properties of hybrids and the corresponding mono nanofluids are missing. In this work, mono B4C and TiB2 and hybrid TiB2:B4C nanoadditives are used for the first time to design nanofluids based on propylene glycol:water 20:80 wt%. The density, isobaric heat capacity, and thermal conductivity of the nanofluids are determined by the oscillating U-tube, differential scanning calorimetry, and transient hot wire methods, respectively. The rheological behaviour is investigated through rotational rheometry. Additionally, surface tension and electrical conductivity are investigated. The B4C mono nanofluid shows the highest improvements of thermal conductivity (6.0%) and electrical conductivity (70 times higher), but also the highest viscosity increases (51–54%). The hybrid nanofluid presents intermediate values between those of the mono nanofluids for all the properties except dynamic viscosity. Interactions between spherical and sheet-like nanoparticles explain this behaviour., Agencia Estatal de Investigación | Ref. ENE2017-86425-C2-1-R, Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Development and thermophysical profile of cetyl alcohol-in-water nanoemulsions for thermal management

  • Cabaleiro Álvarez, David
  • Losada Barreiro, Sonia
  • Agresti, Filippo
  • Hermida Merino, Carolina
  • Fedele, Laura
  • Lugo Latas, Luis
  • Barison, Simona
  • Martínez Piñeiro, Manuel
This study focuses on the preparation, thermophysical and rheological characterization of phase change material nanoemulsions as latent functionally thermal fluids. Aqueous dispersions with fine droplets of cetyl alcohol (with a melting temperature at ~321 K) were prepared by means of a solvent-assisted method, combining ultrasonication with non-ionic and anionic emulsifiers. Eicosyl alcohol (melting at ~337 K) and hydrophobic silica nanoparticles were tested as nucleating agents. Droplet size studies through time and after freeze–thaw cycles confirmed the good stability of formulated nanoemulsions. Phase change analyses proved the effectiveness of eicosyl alcohol to reduce subcooling to a few Kelvin. Although phase change material emulsions exhibited thermal conductivities much larger than bulk cetyl alcohol (at least 60% higher when droplets are solid), reductions in this property reached 15% when compared to water. Samples mainly showed desirable Newtonian behavior (or slight shear thinning viscosities) and modifications in density around melting transition were lower than 1.2%. In the case of phase change material nanoemulsions with 8 wt.% content of dispersed phase, enhancements in the energy storage capacity overcome 20% (considering an operational temperature interval of 10 K around solid–liquid phase change). Formulated dispersions also showed good thermal reliability throughout 200 solidification–melting cycles., European Commission | Ref. SOE2 / P1 / P0823, Ministerio de Ciencia e Innovación | Ref. ENE2017-86425-C2-1-R, Ministerio de Ciencia e Innovación | Ref. PID2020-112846RB-C21