Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Location-Specific Spectral and Thermal Effects in Tracking and Fixed Tilt Photovoltaic Systems

  • Ripalda, José M.
  • Chemisana Villegas, Daniel
  • Llorens, José M.
  • García, Iván
The efficiency of photovoltaic modules in the field is generally lower than the efficiency under standard testing conditions due to temperature and spectral effects. Using the latest spectral dataset available from the National Solar Radiation Database, we report spectral correction factors ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. We find that spectral effects favor trackers if silicon modules are used, but favor a fixed tilt instead if perovskites or CdTe are used. In high-irradiance locations, the energy yield advantage of silicon-based trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far outweighting the cost of the required research effort., We gratefully acknowledge the scientific and technical input from Dr. J. Buencuerpo. This work would have not been possible without the data and computing resources made publicly available by NREL as part of the NSRDB. Funding was provided by the Spanish Government and the European Union through MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22, RYC-2017-21995) and Comunidad de Madrid (P2018/EMT-4308). D.C. thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)" for the ICREA Acadèmia award. I.G. is funded by Ministerio de Economía y Competitividad through the Ramón y Cajal program (RYC-2014-15621).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Dependence of multijunction optimal gaps on spectral variability and other environmental and device parameters

  • Ripalda, José María
  • Buencuerpo, Jerónimo
  • García, Iván
Trabajo presentado en la 46th IEEE Photovoltaic Specialist Conference (PVSC), celebrada en Chicago, Illinois (Estados Unidos), del 16 al 21 de junio de 2019, We present a method to calculate the yearly energy production of multijunctions including spectral variations. We use it to find the optimal band gaps yielding maximum energy production. The band gaps found are different to those previously reported when using the standard efficiency as the optimization target. Our calculations predict that novel hybrid tandems in combination with bifacial silicon can lead to energy yields near 1 MWh m -2 year -1 at most locations of interest. We also discuss the effects of changing parameters such as the external radiative efficiency, series resistance, sub-cell thickness, temperatures, and location., Funding was provided by the Goverment of Spain (TEC2015-64189-C3-2-R, ENE2017-91092-EXP, RYC-2014- 15621) and Comunidad de Madrid (P2018/EMT-4308)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Location-Specific Spectral and Thermal Effects in Tracking and Fixed Tilt Photovoltaic Systems

  • Ripalda, José María
  • Chemisana, Daniel
  • Llorens Montolio, José Manuel
  • García, Iván
The efficiency of photovoltaic modules in the field is generally lower than the efficiency under standard testing conditions due to temperature and spectral effects. Using the latest spectral dataset available from the National Solar Radiation Database, we report spectral correction factors ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. We find that spectral effects favor trackers if silicon modules are used, but favor a fixed tilt instead if perovskites or CdTe are used. In high-irradiance locations, the energy yield advantage of silicon-based trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far outweighting the cost of the required research effort.Energy Resources; Energy Management; Energy Systems, Funding was provided by the Spanish Government and the European Union through MCIU-AEI-FEDER-UE ( ENE2017-91092-EXP , RTI2018-096937-B-C22 , RYC-2017-21995 ) and Comunidad de Madrid ( P2018/EMT-4308 ). D.C. thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)" for the ICREA Acadèmia award. I.G. is funded by Ministerio de Economía y Competitividad through the Ramón y Cajal program ( RYC-2014-15621 ).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

System for manufacturing complete Cu(In,Ga)Se2 solar cells in situ under vacuum

  • Fuster, David
  • Anacleto, Pedro
  • Virtuoso, Jose
  • Zutter, Marco
  • Brito, Daniel
  • Alves, Marina
  • Aparicio, Luis
  • Fuertes Marrón, D.
  • Briones Fernández-Pola, Fernando
  • Sadewasser, Sascha
  • García Martínez, Jorge Manuel
We present the development of a small foot-print physical vapor deposition (PVD) system for in-situ deposition of all layers required in a complete Cu(In,Ga)Se (CIGS) solar cell. Seven sputtering magnetrons and one valved-cracker source have been custom designed and manufactured for this system, named SpuTtering for Advanced Research (STAR). The purpose of STAR is to develop a technique to fabricate a complete CIGS solar cell, including contacts, absorber, buffer, and window layers, under high vacuum with the aim to transfer this technology to a future industrial production line. The system's capabilities and its relatively high throughput place it somewhere in between research and industrial development levels. It is possible to work on the deposition of the back contact, the CIGS absorber, and the window layer of three solar cells simultaneously. Calibration data, selection of parameters for the deposition of the individual layers, and initial results of a complete CIGS solar cell developed with STAR are reported., We acknowledge financial support by the Spanish projects AIC-B-2011-0806 and MAT2015-67021-R, and by the “Micro-concentrator thin film solar cells (MiconCell)” project (028922), and the “Correlated Analysis of Inorganic Solar Cells in and outside an Electron Microscope (CASOLEM)” project (028917), both co-funded by FCT and the ERDF through COMPETE2020. We also acknowledge financial support by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and Comunidad de Madrid (P2018/EMT-4308). We acknowledge the services at IMN-CNM from the X-SEM Laboratory (MINECO CSIC13-4E-1794) and from MiNa Laboratory (funding from CM under project S2013/ICE-2822, Space-Tec) both with support from EU (FEDER, FSE)”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of a carbon evaporator cell for MBE growth

  • Fuster, David
  • González Díez, Yolanda
  • González Sotos, Luisa
  • Méndez, Javier
  • García, F.
  • Córdoba-Cabanillas, J. L.
  • Dotor-Castilla, María Luisa
  • Álvaro Bruna, Raquel
  • Torné, Lorena
  • García Martínez, Jorge Manuel
A new design of carbon source using a S-shaped glassy carbon filament for p-doping and carbon deposition is presented. Due to the higher resistivity of the glassy carbon, lower current is needed to produce the same flux as in a source based on pyrolytic graphite filament. The source design is very compact and the use of water cooling is not mandatory. The results and simulations of the new design show a higher flux than the previously reported glassy carbon based source while avoiding hot spots that can cause an early filament degradation. Hole mobility vs doping level relation data on p-doped GaAs layers grown by molecular beam epitaxy using this new carbon source are shown. With this new C source GaAs (001) surface morphology flatness is preserved after depositing C, showing a reduced substrate heating radiation essential for operate in III-V solid source molecular beam epitaxy (MBE) systems., The authors wish to acknowledge the financial support by the Spanish MINECO (MAT2015-67021-R), by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and by Comunidad de Madrid (P2018/EMT-4308). We acknowledge the service from the MiNa Laboratory at IMN, funding from CM (project S2018/NMT-4291 TEC2SPACE), and from the X-SEM Laboratory, funding from MINECO (project CSIC13-4E-1794), both with support from EU (ERDF, ESF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering the reciprocal space for ultrathin GaAs solar cells

  • Buencuerpo, Jerónimo
  • Llorens Montolio, José Manuel
  • Ripalda, José María
  • Steiner, Myles A.
  • Tamboli, Adele C.
III-V solar cells dominate the high efficiency charts, but with significantly higher cost than other solar cells. Ultrathin III-V solar cells can exhibit lower production costs and immunity to short carrier diffusion lengths caused by radiation damage, dislocations, or native defects. Nevertheless, solving the incomplete optical absorption of sub-micron layers presents a challenge for light-trapping structures. Simple photonic crystals have high diffractive efficiencies, which are excellent for narrow-band applications. Random structures offer a broadband response instead but suffer from low diffraction efficiencies. Quasirandom (hyperuniform) structures lie in between, providing high diffractive efficiency over a target wavelength range, which is broader than simple photonic crystals, but narrower than a random structure. In this work, we present a design method to evolve a simple photonic crystal into a quasirandom structure by modifying the spatial-Fourier space in a controlled manner. We apply these structures to an ultrathin GaAs solar cell of only 100 nm. We predict a photocurrent for the tested quasirandom structure of 25.3 mA/cm, while a planar structure would be limited to 16.1 mA/cm. The modified spatial-Fourier space in the quasirandom structure increases the amount of resonances, with a progression from discrete number of peaks to a continuum in the absorption. The enhancement in photocurrent is stable under angle variations because of this continuum. We also explore the robustness against changes in the real-space distribution of the quasirandom structures using different numerical seeds, simulating variations in a self-assembly method. We observe a standard deviation of the quasirandom structures of only 0.3 mA/cm. The approach presented here can be applied to guide future optimizations and experimental design and fabrication of new classes of photonic crystals for GaAs and other ultrathin solar cells., This work was supported by the U.S. Department of Energy under Contract No. DE-AC36-08GO28308 with Alliance for Sustainable Energy, LLC, the Manager and Operator of the National Renewable Energy Laboratory. Funding provided by U.S. Department of Energy Efficiency and Renewable Energy Solar Energy Technologies Office under Agreement Numbers 34911 and 34358. This research was performed using computational resources sponsored by the Department of Energy’s Office of Energy Efficiency and Renewable Energy and located at the National Renewable Energy Laboratory. The U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U.S. Government purposes. JML acknowledges the financial support of Spanish MINECO (RYC-2017–21995) and the European Union FSE. JMR acknowledges support by MCINN (ENE2017-91092-EXP, RTI2018-096937-B-C22) and Com. Mad. (P2018/EMT-4308).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light absorption enhancement and radiation hardening for triple junction solar cell through bioinspired nanostructures

  • Vasileiou, Thomas
  • Llorens Montolio, José Manuel
  • Buencuerpo, Jerónimo
  • Ripalda, José María
  • Izzo, Dario
  • Summerer, Leopold
Multi-junction solar cells constitute the main source of power for space applications. However, exposure of solar cells to the space radiation environment significantly degrades their performance across the mission lifetime. Here, we seek to improve the radiation hardness of the triple junction solar cell, GaInP/Ga(In)As/Ge, by decreasing the thickness of the more sensitive middle junction. Thin junctions facilitate the collection of minority carriers and show slower degradation due to defects. However, thinning the junction decreases the absorption, and consequently, the expected photocurrent. To compensate for this loss, we examined two bioinspired surface patterns that exhibit anti-reflective and light-trapping properties: (a) the moth-eye structure which enables vision in poorly illuminated environments and (b) the patterns of the hard cell of a unicellular photosynthetic micro-alga, the diatoms. We parametrize and optimize the biomimetic structures, aiming to maximize the absorbed light by the solar cell while achieving significant reduction in the middle junction thickness. The density of the radiation-induced defects is independent of the junction thickness, as we demonstrate using Monte Carlo simulations, allowing the direct comparison of different combinations of middle junction thicknesses and light trapping structures. We incorporate the radiation effects into the solar cell model as a decrease in minority carrier lifetime and an increase in surface recombination velocity, and we quantify the gain in efficiency for different combinations of junction thickness and the light-trapping structure at equal radiation damage. Solar cells with thin junctions compensated by the light-trapping structures offer a promising approach to improve solar cell radiation hardness and robustness, with up to 2% higher end-of-life efficiency than the commonly used configuration at high radiation exposure., Funding was provided by the Spanish Government and the European Union through AEIFEDER-UE (ENE2017-91092-EXP, RTI2018-096937- B-C22, RYC-2017-21995) and Comunidad de Madrid (P2018/EMT-4308).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Location-Specific Spectral and Thermal Effects in Tracking and Fixed Tilt Photovoltaic Systems

  • Ripalda, José M.
  • Chemisana Villegas, Daniel
  • Llorens, José M.
  • García, Iván
The efficiency of photovoltaic modules in the field is generally lower than the efficiency under standard testing conditions due to temperature and spectral effects. Using the latest spectral dataset available from the National Solar Radiation Database, we report spectral correction factors ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. We find that spectral effects favor trackers if silicon modules are used, but favor a fixed tilt instead if perovskites or CdTe are used. In high-irradiance locations, the energy yield advantage of silicon-based trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far outweighting the cost of the required research effort., We gratefully acknowledge the scientific and technical input from Dr. J. Buencuerpo. This work would have not been possible without the data and computing resources made publicly available by NREL as part of the NSRDB. Funding was provided by the Spanish Government and the European Union through MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22, RYC-2017-21995) and Comunidad de Madrid (P2018/EMT-4308). D.C. thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)" for the ICREA Acadèmia award. I.G. is funded by Ministerio de Economía y Competitividad through the Ramón y Cajal program (RYC-2014-15621).