Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulation of Highly Coupled Programmable Photonic Circuits

  • Sánchez-Gomáriz, Erica
  • López-Hernández, Aitor
  • Pérez-López, Daniel
[EN] Multipurpose programmable photonic processors have recently emerged as a solution to provide cost-effective and general-purpose functionality for a myriad of photonic applications. Inspired by programmable electronics, the design of these devices lies on generic photonic integrated hardware based on two-dimensional waveguide meshes comprised of tunable couplers and phase actuators. Extending these meshes allows the implementation of more complex structures and functionalities. However, there are design trade-offs arising from parasitic effects coming from fabrication and their dynamic operation. Since the time spent during the design cycle and validation of these complex systems usually involves a costly, risky and time-consuming processes, this work proposes and compares two simulation tools to predict the spectral response of any 2D integrated photonic mesh circuit composed of an arbitrary number of coupled cells. These methods reduce development costs, speed up the growth of new circuit designs, and are a fundamental tool for the development of programmable photonic libraries.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Auto-routing algorithm for field-programmable photonic gate arrays

  • López-Hernández, Aitor
  • Pérez-López, Daniel
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Programmable multipurpose photonic integrated circuits require software routines to make use of their flexible operation as desired. In this work, we propose and demonstrate the use of a modified tree-search algorithm to automatically determine the optimum optical path in a field-programmable photonic gate array (FPPGA), based on end-user specifications, circuit architecture and imperfections in the realized FPPGA arising, for example, from fabrication variations. In such a scenario, the proposed algorithm only requires the hardware topology and the location of the connections of the FPPGA defining the optical path to be programmed. The routine is able to optimize the path over multiple and competing objectives like the overall length, accumulated loss and power consumption. In addition, should any region of the circuit suffer from any potential damage that may affect the device performance, this algorithm is also able to provide basic self-healing and fault-tolerance capabilities by supplying alternative paths through the photonic arrangement., The authors acknowledge financial support by the ERC ADG-2016 UMWP-Chip ERC-2016- ADG-741415, the ERC PoC-2019 FPPAs ERC-2019-POC-859927, the Generalitat Valenciana Future MWP technologies and applications PROMETEO 2017/103 research excellency award, and the COST Action CA16220 EUIMWP, the Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031 and the Infraestructura para caracterizacion de Chips Fotonicos EQC2018-004683-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multipurpose self-configuration of programmable photonic circuits

  • Pérez-López, Daniel
  • López-Hernández, Aitor
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Programmable integrated photonic circuits have been called upon to lead a new revolution in information systems by teaming up with high speed digital electronics and in this way, adding unique complementary features supported by their ability to provide bandwidthunconstrained analog signal processing. Relying on a common hardware implemented by two-dimensional integrated photonic waveguide meshes, they can provide multiple functionalities by suitable programming of their control signals. Scalability, which is essential for increasing functional complexity and integration density, is currently limited by the need to precisely control and configure several hundreds of variables and simultaneously manage multiple configuration actions. Here we propose and experimentally demonstrate two different approaches towards management automation in programmable integrated photonic circuits. These enable the simultaneous handling of circuit self-characterization, auto-routing, self-configuration and optimization. By combining computational optimization and photonics, this work takes an important step towards the realization of high-density and complex integrated programmable photonics., D.P.L. acknowledges funding through the Spanish MINECO Juan de la Cierva program. J.C. acknowledges funding from the ERC Advanced Grant ERC-ADG-2016-741415 UMWP-Chip and ERC-2019-POC-859927. Authors also acknowledge funding from Future MWP technologies and applications PROMETEO/2017/103, Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031, EUIMWP CA16220, Infraestructura para caracterizacion de Chips Fotonicos EQC2018-004683-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Principles, fundamentals, and applications of programmable integrated photonics

  • Pérez-López, Daniel
  • Dasmahapatra, Prometheus
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Programmable integrated photonics is an emerging new paradigm that aims at designing common integrated optical hardware resource configurations, capable of implementing an unconstrained variety of functionalities by suitable programming, following a parallel but not identical path to that of integrated electronics in the past two decades of the last century. Programmable integrated photonics is raising considerable interest, as it is driven by the surge of a considerable number of new applications in the fields of telecommunications, quantum information processing, sensing, and neurophotonics, calling for flexible, reconfigurable, low-cost, compact, and low-power-consuming devices that can cooperate with integrated electronic devices to overcome the limitation expected by the demise of Moore¿s Law. Integrated photonic devices exploiting full programmability are expected to scale from application-specific photonic chips (featuring a relatively low number of functionalities) up to very complex application-agnostic complex subsystems much in the same way as field programmable gate arrays and microprocessors operate in electronics. Two main differences need to be considered. First, as opposed to integrated electronics, programmable integrated photonics will carry analog operations over the signals to be processed. Second, the scale of integration density will be several orders of magnitude smaller due to the physical limitations imposed by the wavelength ratio of electrons and light wave photons. The success of programmable integrated photonics will depend on leveraging the properties of integrated photonic devices and, in particular, on research into suitable interconnection hardware architectures that can offer a very high spatial regularity as well as the possibility of independently setting (with a very low power consumption) the interconnection state of each connecting element. Integrated multiport interferometers and waveguide meshes provide regular and periodic geometries, formed by replicating unit elements and cells, respectively. In the case of waveguide meshes, the cells can take the form of a square, hexagon, or triangle, among other configurations. Each side of the cell is formed by two integrated waveguides connected by means of a Mach¿Zehnder interferometer or a tunable directional coupler that can be operated by means of an output control signal as a crossbar switch or as a variable coupler with independent power division ratio and phase shift. In this paper, we provide the basic foundations and principles behind the construction of these complex programmable circuits. We also review some practical aspects that limit the programming and scalability of programmable integrated photonics and provide an overview of some of the most salient applications demonstrated so far., European Research Council; Conselleria d'Educació, Investigació, Cultura i Esport; Ministerio de Ciencia, Innovación y Universidades; European Cooperation in Science and Technology; Horizon 2020 Framework Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

General-purpose programmable photonic processor for advanced radiofrequency applications

  • Pérez-López, Daniel
  • Gutierrez Campo, Ana Maria
  • Sánchez, David
  • López-Hernández, Aitor
  • Gutiérrez, Mikel
  • Sánchez-Gomáriz, Erica
  • Fernández, Juan
  • Cruz, Alejandro
  • Quirós, Alberto
  • Xie, Zhenyun
  • Benítez-González, Jesús
  • Bekesi, Nandor
  • Santomé, Alejandro
  • Pérez-Galacho, Diego
  • Dasmahapatra, Prometheus
  • Macho-Ortiz, Andrés
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] A general-purpose photonic processor can be built integrating a silicon photonic programmable core in a technology stack comprising an electronic monitoring and controlling layer and a software layer for resource control and programming. This processor can leverage the unique properties of photonics in terms of ultra-high bandwidth, high-speed operation, and low power consumption while operating in a complementary and synergistic way with electronic processors. These features are key in applications such as nextgeneration 5/6 G wireless systems where reconfigurable filtering, frequency conversion, arbitrary waveform generation, and beamforming are currently provided by microwave photonic subsystems that cannot be scaled down. Here we report the first general-purpose programmable processor with the remarkable capability to implement all the required basic functionalities of a microwave photonic system by suitable programming of its resources. The processor is fabricated in silicon photonics and incorporates the full photonic/ electronic and software stack., D.P.L. acknowledges funding through the ERC-StG-2022-LS-Photonics 101076175. J.C. acknowledges funding from the ERC Advanced Grant ERC-ADG-2016-741415 UMWP-Chip and ERC-POC-2019-959927, Generalitat Valenciana funding through Future MWP technologies and applications PROMETEO/2017/103, Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031, EUIMWP CA16220, Infraestructura para caracterización de Chips Fotónicos EQC2018-004683-P. All the authors also acknowledge funding from HORIZON-EIC-2021-TRANSITION OPEN-01101057934 INSPIRE.