Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Image analysis for the quantitative comparison of stress fibers and focal adhesions

  • Elosegui-Artola, A.
  • Jorge-Peñas, A.
  • Moreno-Arotzena, O.
  • Oregi, A.
  • Lasa, M.
  • García-Aznar, J.M.
  • De Juan-Pardo, E.M.
  • Aldabe, R.
Actin stress fibers (SFs) detect and transmit forces to the extracellular matrix through focal adhesions (FAs), and molecules in this pathway determine cellular behavior. Here, we designed two different computational tools to quantify actin SFs and the distribution of actin cytoskeletal proteins within a normalized cellular morphology. Moreover, a systematic cell response comparison between the control cells and those with impaired actin cytoskeleton polymerization was performed to demonstrate the reliability of the tools. Indeed, a variety of proteins that were present within the string beginning at the focal adhesions (vinculin) up to the actin SFs contraction (non-muscle myosin II (NMMII)) were analyzed. Finally, the software used allows for the quantification of the SFs based on the relative positions of FAs. Therefore, it provides a better insight into the cell mechanics and broadens the knowledge of the nature of SFs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A time-dependent phenomenological model for cell mechano-sensing

  • Borau, C.
  • Kamm, R.D.
  • García-Aznar, J.M.
Adherent cells normally apply forces as a generic means of sensing and responding to the mechanical nature of their surrounding environment. How these forces vary as a function of the extracellular rigidity is critical to understanding the regulatory functions that drive important phenomena such as wound healing or muscle contraction. In recognition of this fact, experiments have been conducted to understand cell rigidity-sensing properties under known conditions of the extracellular environment, opening new possibilities for modeling this active behaviour. In this work, we provide a physics-based constitutive model taking into account the main structural components of the cell to reproduce its most significant contractile properties such as the traction forces exerted as a function of time and the extracellular stiffness. This model shows how the interplay between the time-dependent response of the acto-myosin contractile system and the elastic response of the cell components determine the mechano-sensing behaviour of single cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Characterization of Fibrin and Collagen Gels for Engineering Wound Healing Models

  • Moreno-Arotzena , Oihana
  • Meier, Johann G
  • del Amo, Cristina
  • García-Aznar, José Manuel
Hydrogels are used for 3D in vitro assays and tissue engineering and regeneration purposes. For a thorough interpretation of this technology, an integral biomechanical characterization of the materials is required. In this work, we characterize the mechanical and functional behavior of two specific hydrogels that play critical roles in wound healing, collagen and fibrin. A coherent and complementary characterization was performed using a generalized and standard composition of each hydrogel and a combination of techniques. Microstructural analysis was performed by scanning electron microscopy and confocal reflection imaging. Permeability was measured using a microfluidic-based experimental set-up, and mechanical responses were analyzed by rheology. We measured a pore size of 2.84 and 1.69 µm for collagen and fibrin, respectively. Correspondingly, the permeability of the gels was 1.00·10-12 and 5.73·10-13 m2. The shear modulus in the linear viscoelastic regime was 15 Pa for collagen and 300 Pa for fibrin. The gels exhibited strain-hardening behavior at ca. 10% and 50% strain for fibrin and collagen, respectively. This consistent biomechanical characterization provides a detailed and robust starting point for different 3D in vitro bioapplications, such as collagen and/or fibrin gels. These features may have major implications for 3D cellular behavior by inducing divergent microenvironmental cues.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fibroblast migration in 3D is controlled by haptotaxis in a non-muscle myosin II-dependent manner

  • Moreno-Arotzena, O.
  • Borau, C.
  • Movilla, N.
  • Vicente-Manzanares, M.
  • García-Aznar, J.M.
Cell migration in 3D is a key process in many physiological and pathological processes. Although valuable knowledge has been accumulated through analysis of various 2D models, some of these insights are not directly applicable to migration in 3D. In this study, we have confined biomimetic hydrogels within microfluidic platforms in the presence of a chemoattractant (platelet-derived growth fac- tor-BB). We have characterized the migratory responses of human fibroblasts within them, particularly focusing on the role of non-muscle myosin II. Our results indicate a prominent role for myosin II in the integration of chemo- tactic and haptotactic migratory responses of fibroblasts in 3D confined environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In silico mechano-chemical model of bone healing for the regeneration of critical defects: The effect of BMP-2

  • Ribeiro, F.O.
  • Gómez-Benito, M.J.
  • Folgado, J.
  • Fernandes, P.R.
  • García-Aznar, J.M.
The healing of bone defects is a challenge for both tissue engineering and modern ortho- paedics. This problem has been addressed through the study of scaffold constructs com- bined with mechanoregulatory theories, disregarding the influence of chemical factors and their respective delivery devices. Of the chemical factors involved in the bone healing pro- cess, bone morphogenetic protein-2 (BMP-2) has been identified as one of the most power- ful osteoinductive proteins. The aim of this work is to develop and validate a mechano- chemical regulatory model to study the effect of BMP-2 on the healing of large bone defects in silico. We first collected a range of quantitative experimental data from the literature con- cerning the effects of BMP-2 on cellular activity, specifically proliferation, migration, differen- tiation, maturation and extracellular matrix production. These data were then used to define a model governed by mechano-chemical stimuli to simulate the healing of large bone de- fects under the following conditions: natural healing, an empty hydrogel implanted in the de- fect and a hydrogel soaked with BMP-2 implanted in the defect. For the latter condition, successful defect healing was predicted, in agreement with previous in vivo experiments. Further in vivo comparisons showed the potential of the model, which accurately predicted bone tissue formation during healing, bone tissue distribution across the defect and the quantity of bone inside the defect. The proposed mechano-chemical model also estimated the effect of BMP-2 on cells and the evolution of healing in large bone defects. This novel in silico tool provides valuable insight for bone tissue regeneration strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Probabilistic Voxel-Fe model for single cell motility in 3D

  • Borau, Carlos
  • Polacheck, William J
  • Kamm, Roger D
  • García-Aznar, José Manuel
Background: Cells respond to a variety of external stimuli regulated by the environment conditions. Mechanical, chemical and biological factors are of great interest and have been deeply studied. Furthermore, mathematical and computational models have been rapidly growing over the past few years, permitting researches to run complex scenarios saving time and resources. Usually these models focus on specific features of cell migration, making them only suitable to study restricted phenomena. Methods: Here we present a versatile finite element (FE) cell-scale 3D migration model based on probabilities depending in turn on ECM mechanical properties, chemical, fluid and boundary conditions. Results: With this approach we are able to capture important outcomes of cell migration such as: velocities, trajectories, cell shape and aspect ratio, cell stress or ECM displacements. Conclusions: The modular form of the model will allow us to constantly update and redefine it as advancements are made in clarifying how cellular events take place.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A discrete approach for modeling cell-matrix adhesions

  • Escribano, J.
  • Sánchez, M.T.
  • García-Aznar, J.M.
During recent years the interaction between the extracellular matrix and the cytoskeleton of the cell has been object of numerous studies due to its importance in cell migration processes. These interactions are performed through protein clutches, known as focal adhesions. For migratory cells these focal adhesions along with force gener- ating processes in the cytoskeleton are responsible for the for- mation of protrusion structures like lamellipodia or filopodia. Much is known about these structures: the different proteins that conform them, the players involved in their formation or their role in cell migration. Concretely, growth-cone filopo- dia structures have attracted significant attention because of their role as cell sensors of their surrounding environment and its complex behavior. On this matter, a vast myriad of math- ematical models has been presented to explain its mechan- ical behavior. In this work, we aim to study the mechani- cal behavior of these structures through a discrete approach. This numerical model provides an individual analysis of the proteins involved including spatial distribution, interaction between them, and study of different phenomena, such as clutches unbinding or protein unfolding.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An unstructured immersed finite element method for nonlinear solid mechanics

  • Ru¨berg, Thomas
  • Cirak, Fehmi
  • García Aznar, José Manuel
We present an immersed finite element technique for boundary-value and interface problems from nonlinear solid mechanics. Its key features are the implicit representation of domain boundaries and interfaces, the use of Nitsche’s method for the incorporation of boundary conditions, accurate numerical integration based on marching tetrahedrons and cut-element stabilisation by means of extrapolation. For discretisation structured and unstructured background meshes with Lagrange basis functions are considered. We show numerically and analytically that the introduced cut-element stabilisation technique provides an effective bound on the size of the Nitsche parameters and, in turn, leads to well-conditioned system matrices. In addition, we introduce a novel approach for representing and analysing geometries with sharp features (edges and corners) using an implicit geometry representation. This allows the computation of typical engineering parts composed of solid primitives without the need of boundary-fitted meshes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Numerical simulation of solid deformation driven by creeping flow using an immersed finite element method

  • Rüberg, Thomas
  • García Aznar, José Manuel
An immersed finite element method for solid–fluid interaction is presented with application focus on highly deformable elastic bodies in a Stokes flow environment. The method is based on a global balance equation which combines the solid and fluid momentum balances, the fluid mass balance and, in weak form, the interface conditions. By means of an Updated Lagrangian description for finite elasticity, only one analysis mesh is used, where the solid particles are backtracked in order to preserve the deformation history. The method results in a full coupling of the solid-fluid system which is solved by an exact Newton method. The location of the material interface is captured by a signed distance function and updated according to the computed displacement increments and the help of an explicit surface parameterisation; no body-fitted volume meshes are needed. Special emphasis is placed on the accurate integration of finite elements traversed by the interface and the related numerical stability of the shape function basis. A number of applications for compressible Neo-Hookean solids subject to creeping flow are presented, motivated by microfluidic experimentation in mechanobiology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modeling the formation of cell-matrix adhesions on a single 3D matrix fiber

  • Escribano, J.
  • Sánchez, M.T.
  • García-Aznar, J.M.
Cell-matrix adhesions are crucial in different biological processes like tissue morphogenesis, cell motility, and extracellular matrix remodeling. These interactions that link cell cytoskeleton and matrix fibers are built through protein clutches, generally known as adhesion complexes. The adhesion formation process has been deeply studied in two-dimensional (2D) cases// however, the knowledge is limited for three-dimensional (3D) cases. In this work, we simulate different local extracellular matrix properties in order to unravel the fundamental mechanisms that regulate the formation of cell-matrix adhesions in 3D. We aim to study the mechanical interaction of these biological structures through a three dimensional discrete approach, reproducing the transmission pattern force between the cytoskeleton and a single extracellular matrix fiber. This numerical model provides a discrete analysis of the proteins involved including spatial distribution, interaction between them, and study of the different phenomena, such as protein clutches unbinding or protein unfolding.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Computational model of mesenchymal migration in 3D under chemotaxis

  • Ribeiro, F.O.
  • Gómez-Benito, M.J.
  • Folgado, J.
  • Fernandes, P.R.
  • García-Aznar, J.M.
Cell chemotaxis is an important characteristic of cellular migration, which takes part in crucial aspects of life and development. In this work, we propose a novel in silico model of mesenchymal 3D migration with competing protrusions under a chemotactic gradient. Based on recent experimental observations, we identify three main stages that can regulate mesenchymal chemotaxis: chemosensing, dendritic protrusion dynamics and cell–matrix interactions. Therefore, each of these features is considered as a different module of the main regulatory computational algorithm. The numerical model was particularized for the case of fibroblast chemotaxis under a PDGF-bb gradient. Fibroblasts migration was simulated embedded in two different 3D matrices – collagen and fibrin – and under several PDGF-bb concentrations. Validation of the model results was provided through qualitative and quantitative comparison with in vitro studies. Our numerical predictions of cell trajectories and speeds were within the measured in vitro ranges in both collagen and fibrin matrices. Although in fibrin, the migration speed of fibroblasts is very low, because fibrin is a stiffer and more entangling matrix. Testing PDGF-bb concentrations, we noticed that an increment of this factor produces a speed increment. At 1 ng mL-1 a speed peak is reached after which the migration speed diminishes again. Moreover, we observed that fibrin exerts a dampening behavior on migration, significantly affecting the migration efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Characterization of three-dimensional cancer cell migration in mixed collagen-Matrigel scaffolds using microfluidics and image analysis

  • Anguiano, M.
  • Castilla, C.
  • Maška, M.
  • Ederra, C.
  • Peláez, R.
  • Morales, X.
  • Muñoz-Arrieta, G.
  • Mujika, M.
  • Kozubek, M.
  • Muñoz-Barrutia, A.
  • Rouzaut, A.
  • Arana, S.
  • Garcia-Aznar, J.
  • Ortiz-de-Solorzano, C.
Microfluidic devices are becoming mainstream tools to recapitulate in vitro the behavior of cells and tissues. In this study, we use microfluidic devices filled with hydrogels of mixed collagen-Matrigel composition to study the migration of lung cancer cells under different cancer invasion microenvironments. We present the design of the microfluidic device, characterize the hydrogels morphologically and mechanically and use quantitative image analysis to measure the migration of H1299 lung adenocarcinoma cancer cells in different experimental conditions. Our results show the plasticity of lung cancer cell migration, which turns from mesenchymal in collagen only matrices, to lobopodial in collagen-Matrigel matrices that approximate the interface between a disrupted basement membrane and the underlying connective tissue. Our quantification of migration speed confirms a biphasic role of Matrigel. At low concentration, Matrigel facilitates migration, most probably by providing a supportive and growth factor retaining environment. At high concentration, Matrigel slows down migration, possibly due excessive attachment. Finally, we show that antibody-based integrin blockade promotes a change in migration phenotype from mesenchymal or lobopodial to amoeboid and analyze the effect of this change in migration dynamics, in regards to the structure of the matrix.In summary, we describe and characterize a robust microfluidic platform and a set of software tools that can be used to study lung cancer cell migration under different microenvironments and experimental conditions. This platform could be used in future studies, thus benefitting from the advantages introduced by microfluidic devices: precise control of the environment, excellent optical properties, parallelization for high throughput studies and efficient use of therapeutic drugs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Involvement of Cellular Prion Protein in a-Synuclein Transport in Neurons

  • Urrea, L.
  • Segura-Feliu, M.
  • Masuda-Suzukake, M.
  • Hervera, A.
  • Pedraz, L.
  • Garcia Aznar, J.M.
  • Vila, M.
  • Samitier, J.
  • Torrents, E.
  • Ferrer, I.
  • Gavín, R.
  • Hagesawa, M.
  • Del Río, J.A.
The cellular prion protein, encoded by the gene Prnp, has been reported to be a receptor of ß-amyloid. Their interaction is mandatory for neurotoxic effects of ß-amyloid oligomers. In this study, we aimed to explore whether the cellular prion protein participates in the spreading of a-synuclein. Results demonstrate that Prnp expression is not mandatory for a-synuclein spreading. However, although the pathological spreading of a-synuclein can take place in the absence of Prnp, a-synuclein expanded faster in PrPC-overexpressing mice. In addition, a-synuclein binds strongly on PrPC-expressing cells, suggesting a role in modulating the effect of a-synuclein fibrils.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Morphological Transformation and Force Generation of Active Cytoskeletal Networks

  • Bidone, T.C.
  • Jung, W.
  • Maruri, D.
  • Borau, C.
  • Kamm, R.D.
  • Kim, T.
Cells assemble numerous types of actomyosin bundles that generate contractile forces for biological processes, such as cytokinesis and cell migration. One example of contractile bundles is a transverse arc that forms via actomyosin-driven condensation of actin filaments in the lamellipodia of migrating cells and exerts significant forces on the surrounding environments. Structural reorganization of a network into a bundle facilitated by actomyosin contractility is a physiologically relevant and biophysically interesting process. Nevertheless, it remains elusive how actin filaments are reoriented, buckled, and bundled as well as undergo tension buildup during the structural reorganization. In this study, using an agent-based computational model, we demonstrated how the interplay between the density of myosin motors and cross-linking proteins and the rigidity, initial orientation, and turnover of actin filaments regulates the morphological transformation of a cross-linked actomyosin network into a bundle and the buildup of tension occurring during the transformation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Localized tissue mineralization regulated by bone remodelling: A computational approach

  • Berli, M.
  • Borau, C.
  • Decco, O.
  • Adams, G.
  • Cook, R. B.
  • García Aznar, J. M.
  • Zioupos, P.
Bone is a living tissue whose main mechanical function is to provide stiffness, strength and protection to the body. Both stiffness and strength depend on the mineralization of the organic matrix, which is constantly being remodelled by the coordinated action of the bone multicellular units (BMUs). Due to the dynamics of both remodelling and mineralization, each sample of bone is composed of structural units (osteons in cortical and packets in cancellous bone) created at different times, therefore presenting different levels of mineral content. In this work, a computational model is used to understand the feedback between the remodelling and the mineralization processes under different load conditions and bone porosities. This model considers that osteoclasts primarily resorb those parts of bone closer to the surface, which are younger and less mineralized than older inner ones. Under equilibrium loads, results show that bone volumes with both the highest and the lowest levels of porosity (cancellous and cortical respectively) tend to develop higher levels of mineral content compared to volumes with intermediate porosity, thus presenting higher material densities. In good agreement with recent experimental measurements, a boomerang-like pattern emerges when plotting apparent density at the tissue level versus material density at the bone material level. Overload and disuse states are studied too, resulting in a translation of the apparent-material density curve. Numerical results are discussed pointing to potential clinical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In vitro and in silico characterization of open-cell structures of trabecular bone

  • Ramos-Infante, Samuel Jesús
  • Pérez Ansón, María de los Ángeles
This work aimed to perform a detailed in vitro and in silico characterization of open-cell structures, which resemble trabecular bone, to elucidate osteoporosis failure mechanisms. Experimental and image-based computational methods were used to estimate Young's modulus and porosities of different open-cell structures (Sawbones; Malmö, Sweden). Three different open-cell structures with different porosities were characterized. Additionally, some open-cell structures were scanned using a microcomputed tomography system (µCT) to non-destructively predict specimen Young's modulus of the structures by developing voxel-based and tetrahedral finite element (FE) models. A 3D reconstruction and FE analyses were used. The experimental and computational results with different element types (linear and quadratic tetrahedrons and voxel-based meshes) were compared with Sawbones data (Sawbones; Malmö, Sweden) revealing important differences in Young's modulus and porosities. The specimens with high and low volume fractions were best represented by linear and quadratic tetrahedrons, respectively. These results could be used to develop new osteoporosis-prevention strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Quantification of sprouting angiogenesis under the effect of different growth factors involved in the tumor microenvironmen

  • Del Amo, C.
  • Borau, C.
  • Asín, J.
  • García-Aznar, J. M.
One of the most important problems in tumor control is the management of metastatic process. Angiogenesis or the formation of new blood vessels from preexisting ones plays a crucial role in the expansion of the tumor by providing oxygen, nutrition and conduits for cancer cells to invade and metastasize new tissues¹. Abnormalities of growth factors (GFs) released such as PDGFs (Platelet Derived Growth Factor) could be involved in malignant human diseases2,3. Inflammation and cancer present similar mechanisms of development including angiogenesis or cell proliferation4. In order to know the effect on sprouting promotion of GFs existent in the tumor environment such as VEGF (Vascular Endothelial Growth Factor), PDGF, BMP2 (Bone Morphogenetic Protein 2) or TGF-ß (Transforming Growth Factor-ß), we have developed a microfluidic-based test based on devices designed by Farahat et al. (2012)5, which allows to the user the quantification of sprouting formation under the effect of these GFs. TGF-ß pathway involved in tumor progression in multiple human cancers, instigates phenotypical changes affecting to the cell growth, differentiation and migration6. Knowing the overexpression of GFs such as VEGF or BMP2 in tumors7,8, we aimed to compare its effect on endothelial cells in angiogenesis. Analyzing the promotion of sprout in normal conditions under GFs addition would be possible to determine which of these molecules could decrease or promote the advance of the endothelial cells. The results obtained in this work indicated that VEGF is the most important factor to enhance the angiogenic process while non-specific factors such as BMP2 or TGF-ß show a low effectiveness. In the case of PDGF, the negative effect of this molecule observed in our assays could be explained by the non-optimal balance of concentration. Furthermore, we are currently working to quantify the effect of fluid flow on the sprouting promotion.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modeling Confined Cell Migration Mediated by Cytoskeleton Dynamics

  • Sánchez, M.T.
  • García Aznar, J.M.
Cell migration is an important biological process that has generated increasing interest during the last several years. This process is based on three phases: protrusion at the front end of the cell, de-adhesion at the rear end and contraction of the cell body, all of them coordinated due to the polymerization/depolymerization of certain cytoskeletal proteins. The aim of this work is to present a mathematical model to simulate the actin polymerization/depolymerization process that regulates the final outcome of cell migration process, considering all the above phases, in a particular case: when the cell is confined in a microfluidic channel. Under these specific conditions, cell migration can be approximated by using one-dimensional simulations. We will propose a system of reaction-diffusion equations to simulate the behavior of the cytoskeletal proteins responsible for protrusion and contraction in the cell, coupled with the mechanical response of the cell, computing its deformations and stresses. Furthermore, a numerical procedure is presented in order to simulate the whole process in a moving and deformable domain corresponding to the cell body.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Discrete particle model for cement infiltration within open-cell structures: Prevention of osteoporotic fracture

  • Ramos-Infante, S.J.
  • Ten-Esteve, A.
  • Alberich-Bayarri, A.
  • Pérez, M.A.
This paper proposes a discrete particle model based on the random-walk theory for simulating cement infiltration within open-cell structures to prevent osteoporotic proximal femur fractures. Model parameters consider the cement viscosity (high and low) and the desired direction of injection (vertical and diagonal). In vitro and in silico characterizations of augmented open-cell structures validated the computational model and quantified the improved mechanical properties (Young''s modulus) of the augmented specimens. The cement injection pattern was successfully predicted in all the simulated cases. All the augmented specimens exhibited enhanced mechanical properties computationally and experimentally (maximum improvements of 237.95 ± 12.91% and 246.85 ± 35.57%, respectively). The open-cell structures with high porosity fraction showed a considerable increase in mechanical properties. Cement augmentation in low porosity fraction specimens resulted in a lesser increase in mechanical properties. The results suggest that the proposed discrete particle model is adequate for use as a femoroplasty planning framework.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Computational modelling of wound healing insights to develop new treatments

  • Gómez-Benito, M.J.
  • Valero, C.
  • García-Aznar, J.M.
  • Javierre, E.
About 1% of the population will suffer a severe wound during their life. Thus, it is really important to develop new techniques in order to properly treat these injuries due to the high socioeconomically impact they suppose. Skin substitutes and pressure based therapies are currently the most promising techniques to heal these injuries. Nevertheless, we are still far from finding a definitive skin substitute for the treatment of all chronic wounds. As a first step in developing new tissue engineering tools and treatment techniques for wound healing, in silico models could help in understanding the mechanisms and factors implicated in wound healing. Here, we review mathematical models of wound healing. These models include different tissue and cell types involved in healing, as well as biochemical and mechanical factors which determine this process. Special attention is paid to the contraction mechanism of cells as an answer to the tissue mechanical state. Other cell processes such as differentiation and proliferation are also included in the models together with extracellular matrix production. The results obtained show the dependency of the success of wound healing on tissue composition and the importance of the different biomechanical and biochemical factors. This could help to individuate the adequate concentration of growth factors to accelerate healing and also the best mechanical properties of the new skin substitute depending on the wound location in the body and its size and shape. Thus, the feedback loop of computational models, experimental works and tissue engineering could help to identify the key features in the design of new treatments to heal severe wounds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Quantification of angiogenic sprouting under different growth factors in a microfluidic platform

  • Del Amo, C.
  • Borau, C.
  • Gutiérrez, R.
  • Asín, J.
  • García-Aznar, J.M.
Angiogenesis, as example of collective migration of endothelial cells (ECs), is the main dynamic process that culminates in sprout formation from existing vessels. After tissue injury, the vascularity is interrupted, triggering the regeneration process and the release of different growth factors (GFs). The main aim of this work is to quantify the effect of specific GFs during the initial stage of sprout formation, namely: VEGF, PDGF-BB, TGFß and BMP-2, all of them involved in regenerative processes. For this purpose, we designed a novel algorithm implemented in Matlab to quantify the advance of the EC monolayer over time and the sprout structure in 3D. Our results show that VEGF is the main regulatory GF on angiogenesis processes, producing longer sprouts with higher frequency. However, the chemoattractant effect of VEGF depends on its concentration and its spatiotemporal location, having a critical impact on the sprout time evolution. PDGF-BB (namely as PDGF) has a global negative effect on both the number and length of sprouts. TGFß enhances sprout length at earlier times, although its effect gradually disappears over time. Finally, BMP-2 produces, overall, less number and shorter sprouts, but was the only GF with a positive evolution at longer times, producing fewer but longer sprouts.