Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Depth of faulting and ancient heat flows in the Kuiper region of Mercury from lobate scarp topography

  • Egea González, María Isabel
  • Ruiz, Javier
  • Fernández, Carlos
  • Williams, Jean Pierre
  • Márquez, Álvaro
  • Lara, Luisa
Mercurian lobate scarps are interpreted to be the surface expressions of thrust faults formed by planetary cooling and contraction, which deformed the crust down to the brittle–ductile transition (BDT) depth at the time of faulting. In this work we have used a forward modeling procedure in order to analyze the relation between scarp topography and fault geometries and depths associated with a group of prominent lobate scarps (Santa Maria Rupes and two unnamed scarps) located in the Kuiper region of Mercury for which Earth-based radar altimetry is available. Also a backthrust associated with one of the lobate scarps has been included in this study. We have obtained best fits for depths of faulting between 30 and 39 km; the results are consistent with the previous results for other lobate scarps on Mercury. The so-derived fault depths have been used to calculate surface heat flows for the time of faulting, taking into account crustal heat sources and a heterogeneous surface temperature due to the variable insolation pattern. Deduced surface heat flows are between 19 and 39 mW m2 for the Kuiper region, and between 22 and 43 mW m2 for Discovery Rupes. Both BDT depths and heat flows are consistent with the predictions of thermal history models for the range of time relevant for scarp formation
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The BepiColombo Laser Altimeter (BeLA) power converter module (PCM): Concept and characterisation

  • Rodrigo, J.
  • Gasquet, E.
  • Castro, J. -M.
  • Herranz, M.
  • Lara, Luisa María
  • Muñoz, M.
  • Simon, A.
  • Behnke, Thomas
  • Thomas, N.
This paper presents the principal considerations when designing DC-DC converters for space instruments, in particular for the power converter module as part of the first European space laser altimeter: “BepiColombo Laser Altimeter” on board the European Space Agency-Japan Aerospace Exploration Agency (JAXA) mission BepiColombo. The main factors which determine the design of the DC-DC modules in space applications are printed circuit board occupation, mass, DC-DC converter efficiency, and environmental-survivability constraints. Topics included in the appropriated DC-DC converter design flow are hereby described. The topology and technology for the primary and secondary stages, input filters, transformer design, and peripheral components are discussed. Component selection and design trade-offs are described. Grounding, load and line regulation, and secondary protection circuitry (under-voltage, over-voltage, and over-current) are then introduced. Lastly, test results and characterization of the final flight design are also presented. Testing of the inrush current, the regulated output start-up, and the switching function of the power supply indicate that these performances are fully compliant with the requirements., This research has been supported by the following: • “Ministerio de Ciencia e Innovacion” (MICINN) ´ within the framework of research Project No. ESP2006- 02934. • “Ministerio de Econom´ıa y Competitividad” (MINECO) within the framework of research Project Nos. AYA2009-08011, AyA 2012-32237, and ESP 2014- 54032-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Depth of faulting and ancient heat flows in the Kuiper region of Mercury from lobate scarp topography

  • Egea-González, I.
  • Ruiz, Javier
  • Fernández, Carlos
  • Williams, Jean-Pierre
  • Márquez, Álvaro
  • Lara, Luisa María
Mercurian lobate scarps are interpreted to be the surface expressions of thrust faults formed by planetary cooling and contraction, which deformed the crust down to the brittleductile transition (BDT) depth at the time of faulting. In this work we have used a forward modeling procedure in order to analyze the relation between scarp topography and fault geometries and depths associated with a group of prominent lobate scarps (Santa Maria Rupes and two unnamed scarps) located in the Kuiper region of Mercury for which Earth-based radar altimetry is available. Also a backthrust associated with one of the lobate scarps has been included in this study. We have obtained best fits for depths of faulting between 30 and 39 km; the results are consistent with the previous results for other lobate scarps on Mercury. The so-derived fault depths have been used to calculate surface heat flows for the time of faulting, taking into account crustal heat sources and a heterogeneous surface temperature due to the variable insolation pattern. Deduced surface heat flows are between 19 and 39 mW m-2for the Kuiper region, and between 22 and 43 mW m-2for Discovery Rupes. Both BDT depths and heat flows are consistent with the predictions of thermal history models for the range of time relevant for scarp formation. © 2011 Elsevier Ltd. All rights reserved., We thank Matthias Grott and an anonymous reviewer for their comments and suggestions. This work has been partly funded by the project AyA2009-08011 of the Spanish MICINN. IEG is thank- ful to the Spanish MICINN for support through Grant ESP2006- 02934. JR work was supported by a contract Ramo´ n y Cajal co- financed from the Ministerio de Ciencia e Innovacio´ n of Spain and the Fondo Social Europeo (ESF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A numerical model of cometary dust coma structures

  • Vincent, J.-B.
  • Böhnhardt, H.
  • Lara, Luisa María
Aims. The purpose of this study is to test our numerical model of cometary dust coma structures and to use the results to infer information about the nucleus surface activity of comet 9P/Tempel 1. Methods. Parameters on the activity were first estimated from simulations of ground-based observation acquired during the pre-perihelion period (January to June 2005) and compared with published results for the same period. The parameters retrieved were then used to simulate previously unpublished images of the comet acquired during the post-perihelion period (in July and August 2005). Results. Our model was able to retrieve the spin axis orientation of comet 9P/Tempel 1 as well as information on active regions at the surface of the nucleus. We could localize at least six active areas and characterize them with parameters such as the velocity of the dust particles, grain size, and activity profile. Our model confirms published results from spacecraft measurements but is also able to make realistic predictions on the evolution of the coma morphology during the post-perihelion period. © ESO, 2010., We would like to thank Peter Thomas and collaborators for providing us the shape model of 9P/Tempel 1. We also wish to thank the observers at the Calar Alto and La Silla observatories who have performed the service mode observations used in our analysis. Without their dedication and care the images would not be available. It should be noted that the determination of the orientation of the rotation axis of 9P/Tempel 1 using ground-based observations has benefit from the relatively long time interval and from the regular sampling of the telescope imaging the comet. In particular, this time period had covered a significant part of the perihelion arc of the orbit, when the activity is the highest and the changes in viewing geometry of the comet are the largest. L. M. Lara acknowledges the Ministry of Science and Innovation in Spain for having funded this work through project ESP2006-02934.