Skip to main content

DESARROLLO CIENTIFICO Y TECNOLOGICO DEL INSTRUMENTO X-IFU DE LA MISION ATHENA DE LA ESA: DESARROLLO Y CARACTERIZACION DE DETECTORES TES DE MO/AU

ESP2014-53672-C3-2-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Development of Mo/Au transition edge sensors for cryogenic x-ray detectors

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Štrichovanec, Pavel
  • Moral-Vico, Javier
  • Casañ Pastor, Nieves
  • Jáudenes, Rosa M.
  • Sesé Monclús, Javier
Póster presentado al Encuentro RIA-SpaceTec: Nuevas perspectivas en el desarrollo de instrumentación astronómica en España, organizadas por la red SpaceTec-CM (Desarrollo de nuevas tecnologías para instrumentación espacial en la Comunidad de Madrid: S2013/ICE-2822 con el apoyo y la financiación de la Red de Infraestructuras en Astronomía (RIA-MINECO). Las jornadas se celebraron del 10 al 12 de febrero de 2016, en la Sede Central del CSIC (Serrano 117, Madrid)., The so-called Transition Edge Sensors (TES) , whose basic element is a superconducting film operating at cryogenic temperatures (~100mK), constitute high performance detectors for a very wide radiation range. Thus, they are considered essential for extremely sensitive astronomic instruments, either on ground or in space, such as EDELWEISS, CRESST, BICEP2, SCUBA2, ACTPol, SAFARI and ATHENA’s X-IFU, as well as for other applications in science and industry. TES X-ray detectors with extremely high spectral resolution have been fabricated by NASA and SRON, using respectively Mo/Au or Ti/Au bilayers as the sensing element and Bi or Au as absorber. We report here our progress in the fabrication of TES X-ray detectors based on Mo/Au bilayers, within the framework of the initiative to develop a european backup for the X-IFU detector. Mo/Au TES are fabricated on SiN membranes in Ultra High Vacuum conditions through a two-step deposition process, using sputtering and electron-beam deposition, followed by dry etching photolithography. Superconducting Nb wiring is used. Electrodeposited Bi is being developed as absorber. An advanced specific characterization setup has been implemented, involving complex impedance and I-V curve measurements using superconducting electronics in a dilution refrigerator (base temperature <30mK). The first results of characterization are presented., Work financed by the Spanish Ministerio de Economía y Competitividad (projects ESP2013-48637-C2-1-P, ESP2014-53672-C3-2-P and ESP2014-59309-JIN) and the European Commission (project AHEAD: Integrated Activities for the High Energy Astrophysics Domain ); RJ wishes to thank MINECO for her contract BES-2015-072733. We acknowledge also ESA contract No. 4000114932/15/NL/BW “Optimization of a European Transition Edge Sensor Array”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of cryogenic X-ray detectors based on Mo/Au transition edge sensors

  • Pobes, Carlos
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Casañ Pastor, Nieves
  • Štrichovanec, Pavel
  • Sesé Monclús, Javier
  • Moral-Vico, Javier
  • Jáudenes, Rosa M.
We report on the development of Mo/Au based transition edge sensors (TESs) aimed at soft X-ray detection. TESs of different sizes with Tc ~ 100 mK and very narrow transitions have been fabricated. Dark characterization based on I-V, complex impedance, and noise measurements has allowed us to obtain their basic functional parameters at different bath temperatures and operating points. Electrodeposited Bi films, to be used as X-ray absorbers, have been developed and characterized., Work financed by the Spanish Ministerio de Economía y Competitividad-MINECO (projects ESP2014- 53672-C3-2-P and ESP2014-59309-JIN), the European Space Agency-ESA (CTP Contract “Optimization of a European TES array”) and the European Commission (H2020 project AHEAD: “Integrated activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). RMJ wishes to thank MINECO for her FPI contract. We thank PTB for providing the SQUIDs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparison of different Mo/Au TES designs for radiation detectors

  • Pobes, Carlos
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Štrichovanec, Pavel
  • Moral-Vico, Javier
  • Casañ Pastor, Nieves
  • Jáudenes, Rosa M.
  • Sesé Monclús, Javier
Work financed by the Spanish Ministerio de Economía y Competitividad (MINECO, projects ESP2014-59306-JIN, ESP2014-53672-C3-2-P, ESP2016-76683-C3-2-R), the European Space Agency (ESA, CTP Contract “Optimization of a European TES array”) and the European Commission (H2020 project AHEAD: Integrated Activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-04969). RMJ wishes to thank MINECO for her FPI contract. We also thank PTB for providing the SQUIDs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructure and electrical transport in electrodeposited Bi films

  • Moral-Vico, Javier
  • Casañ Pastor, Nieves
  • Camón, Agustín
  • Pobes, Carlos
  • Jáudenes, Rosa M.
  • Štrichovanec, Pavel
  • Fàbrega, Lourdes
The semimetal character of bismuth and its large photon absorbing power make of this element the most suitable absorber material for X-ray low temperature detectors. This application requires coatings of Bi with thicknesses and properties that only electrodeposition methods may achieve. Although there are studies on electrodeposition of bismuth for these detectors and other devices, the process is not straightforward and has not been sufficiently studied in terms of the desired final properties, neither the effect of different parameters is well known or easily reproduced. This work reports the influence of two different electrolytes, of the deposition method, and of heating and stirring on the structure, microstructure and transport properties of bismuth films. Typically, rhombohedral Bi is obtained upon electrodeposition with very good crystallinity, and some crystal preferential orientation, while significant empirical correlations are found among electrochemical parameters, microstructure, and resistivity. Such correlation allows the identification of the deposition parameters for coatings that yield the optimal functional properties., Work financed by the Spanish Ministerio de Economía y Competitividad-MINECO (projects ESP2014-53672-C3-2-P, ESP2016-76683-C3-2-R and ESP2014-59309-JIN), the European Space Agency-ESA (CTP Contract “Optimization of a European TES array”) and the European Commission (H2020 project AHEAD: “Integrated activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). RMJ wishes to thank MINECO for her FPI contract. We acknowledge also the help of Guillermo Antorrena (INA) on XPS data., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Comparison of Ti/Au and Mo/Au TESs characterized under DC bias

  • Pobes, Carlos
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Štrichovanec, Pavel
  • Moral-Vico, Javier
  • Casañ Pastor, Nieves
  • Jáudenes, Rosa M.
  • Sesé Monclús, Javier
  • Khosropanah, Pourya
  • Taralli, Emanuele
  • Nagayoshi, Kenichiro
Resumen del trabajo presentado al 13th Workshop on Low Temperature Electronics (WOLTE-13), celebrado en Sorrento (Italia) del 10 al 13 de septiembre de 2018., Transition Edge Sensors (TESs) are used as extremely sensitive thermometers in a wide range of applications. When coupled to a suitable absorber, they can detect, with unprecedented energy resolution, electromagnetic radiation from microwaves to gamma rays. To achieve this performance, they need to operate at very low temperatures, in the range of 100mK. In order to achieve superconductors with tunable critical temperature (Tc), bilayers made out of few nanometers of a superconductor and a normal metal are used. Depending on the selected materials and thicknesses, the Tc and normal resistance Rn of the device can be selected, which will impact their performance. Different groups worldwide develop TES for soft X-rays detection, mainly for future space missions. In Europe, SRON is developing Ti/Au sensors which are characterized under AC bias, adequate for the frequency domain multiplexing of several pixels. ICMA/ICMAB is developing sensors made of Mo/Au bilayers which are characterized under DC bias. Comparison of performances of the two types of sensors and the two operating conditions is basic for future development and optimization of this technology. In this communication we report on the comparison of Ti/Au and Mo/Au devices characterized under DC bias at ICMA facilities. We analyse the evolution of TES parameters at different operation points taking into account the differences between both materials and fabrication procedures., Work financed by the Spanish Ministerio de Economía y Competitividad (MINECO, projects ESP2014-59306-JIN, ESP2014-53672-C3-2-P, ESP2016-76683-C3-2-R), the European Space Agency (ESA, CTP Contract “Optimization of a European TES array”) and the European Commission (H2020 project AHEAD: Integrated Activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-04969. RMJ wishes to thank MINECO for her FPI contract. We also thank PTB for providing the SQUIDs., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development of Cryogenic X-Ray Detectors Based on Mo/Au Transition Edge Sensors

  • Pobes, C.
  • Fabrega, L.
  • Camon, A.
  • Casan-Pastor, N.
  • Strichovanec, P.
  • Sesé Monclús, Javier
  • Moral-Vico, J.
  • Jaúdenes Calleja, R.M.
We report on the development of Mo/Au based transition edge sensors (TESs) aimed at soft X-ray detection. TESs of different sizes with Tc ~ 100 mK and very narrow transitions have been fabricated. Dark characterization based on I-V, complex impedance, and noise measurements has allowed us to obtain their basic functional parameters at different bath temperatures and operating points. Electrodeposited Bi films, to be used as X-ray absorbers, have been developed and characterized.