Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing proton transport in cross-linked poly(vinyl alcohol)/sulfosuccinic acid membranes by adding TEMPO-oxidized lignocellulose nanofibrils

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Henríquez‑Gallegos, Sergio
  • Pereira, Miguel
[EN] The membranes based on poly(vinyl alcohol) (PVA) and sulfosuccinic acid (SSA) are an interesting alternative for use in proton exchange membrane fuel cells (PEMFC), due to their low cost. Nevertheless, it is necessary to enhance their electrochemical performance for their use. This research aims to understand the effect of the addition of TOLCNFs with different lignin content on the physicochemical properties of PVA/SSA-based membranes, proton transport, and their performance as electrolytes in a laboratory PEMFC. For this, TEMPO-oxidized lignocellulose nanofibrils (TOLCNFs) were produced from Pinus radiata pulp that was delignified using oxidative treatments. TOLCNFs with a lignin content of 29.7% (TOLCNF-0), 21.8% (TOLCNF-0.75), 16.9% (TOLCNF-2), and 9.7% (TOLCNF-5) were obtained by varying oxidative treatment times. Membranes of PVA, SSA, and 5% (w/w) TOLCNF were prepared. The addition of TOLCNF changed the structure of the PVA/SSA membrane, promoting cross-linking between the fibrils. Furthermore, they increased the water absorption capacity (W) and decreased the swelling (S). The proton transport by diffusion through the membranes was hindered by the addition of the TOLCNFs. Despite that, the TOLCNFs promoted proton conductivity through the membranes, due to the increase in their water absorption capacity, hydrophilicity, cross-linking, and W/S ratio. Notably, the PVA/SSA/TOLCNF-0 and PVA/SSA/TOLCNF-2 membranes exhibited the highest proton conductivity over the entire temperature range studied (40-110 degrees C). Finally, the incorporation of the TOLCNFs improved the performance of the PVA/SSA membrane as an electrolyte in a laboratory PEMFC, with the TOLCNF-0 proving to be the best filler for the PVA/SSA membrane., The experimental activities carried out at the Universitat Politècnica de València have been funded by the Spanish Ministry of Science and Innovation with funding from European Union NextGeneration EU (PRTR-C17.11) and by Generalitat Valenciana (MFA/2022/041). The experimental activities carried out at the Universidad de Concepción have been funded by the Agencia Nacional de Investigación y Desarrollo (ANID) under Grant no. FB210015 (CENAMAD).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of hemicellulose and lignin on the fibrillation efficiency and properties of cellulose nanofibrils from native and oxidized Eucalyptus nitens and Pinus radiata pulps

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Henríquez-Gallegos, Sergio
  • Ortega-Sanhueza, Isidora
  • Pereira, Miguel
[EN] Comprehending how raw materials, pretreatments, and treatments affect the properties of cellulose nanofibrils (CNFs) is crucial for their use. This study aims to understand the effect that alkaline treatment has on the characteristics of pulps, the mechanical processes of CNF production, and the characteristics of CNFs from Pinus radiata and Eucalyptus nitens pulps with native and oxidized lignin. For this purpose, Pinus radiata and Eucalyptus nitens pulps with different lignin contents produced by oxidative pretreatment were used as raw material. From these, pulps with different hemicellulose and lignin contents were produced by alkaline treatment. Furthermore, CNFs were prepared by refining and homogenization processes. The chemical composition analysis of pulps containing native lignin, before and after alkaline treatment, revealed distinct behaviors of hemicellulose. In Pinus radiata pulp, hemicellulose remained insoluble under alkaline conditions. In contrast, the hemicellulose from Eucalyptus nitens pulp was partially soluble. Morphological characteristics of CNFs revealed that removing 41.8% of total hemicellulose by alkaline treatment promoted the mechanical fibrillation of Eucalyptus nitens pulp with native lignin, decreasing the average width by 30%. Furthermore, a very low lignin content in this species (~ 1.3%) hindered the mechanical fibrillation of fibers. Finally, the dielectric spectra of CNFs showed that the alkaline treatment increased the activation energies of the relaxations associated with the molecular motions of the hemicellulose and lignin groups, evidencing changes in their structures. These changes were related to the deacetylation of hemicellulose, and the deprotonation of hydroxy groups and the formation of carboxyl groups in lignin., The experimental activities carried out at the Universitat Politecnica de Valencia have been funded by the Spanish Ministry of Science and Innovation for the research Project POLYELMETH (PID2020-116322RB-C31) and Grant PAID-01-22 SUB. The experimental activities carried out at the Universidad de Concepcion have been funded by the Agencia Nacional de Investigacion y Desarrollo (ANID) under Grant No. FB210015 (CENAMAD).