Skip to main content

INTERACCION Y MANIPULACION DE DEFECTOS TOPOLOGICOS: NANOESTRUCTURAS Y MULTICAPAS MAGNETICAS

FIS2013-45469-C4-4-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale imaging of buried topological defects with quantitative X-ray magnetic microscopy

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Duch Llobera, Marta
  • Torras Andrés, Núria
  • Esteve i Tintó, Jaume
  • Vélez, María
  • Alameda, J. M.
  • Ferrer, Salvador
This work is licensed under a Creative Commons Attribution 4.0 International License.-- et al., Advances in nanoscale magnetism increasingly require characterization tools providing detailed descriptions of magnetic configurations. Magnetic transmission X-ray microscopy produces element specific magnetic domain images with nanometric lateral resolution in films up to ∼100 nm thick. Here we present an imaging method using the angular dependence of magnetic contrast in a series of high resolution transmission X-ray microscopy images to obtain quantitative descriptions of the magnetization (canting angles relative to surface normal and sense). This method is applied to 55-120 nm thick ferromagnetic NdCo 5 layers (canting angles between 65° and 22°), and to a NdCo 5 film covered with permalloy. Interestingly, permalloy induces a 43° rotation of Co magnetization towards surface normal. Our method allows identifying complex topological defects (merons or 1/2 skyrmions) in a NdCo 5 film that are only partially replicated by the permalloy overlayer. These results open possibilities for the characterization of deeply buried magnetic topological defects, nanostructures and devices., Work supported by Spanish MINECO under grant FIS2013-45469. A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant SFRH/BPD/90471/2012). C. Blanco-Roldán thanks support from CSIC JAE Predoc Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the anodic aluminium oxide refractive index of nanoporous templates

  • Hierro-Rodríguez, Aurelio
  • Valdés-Bango, F.
  • Alameda, J. M.
  • Teixeira, J. M.
In the present study, we have determined the intrinsic refractive index of anodic aluminium oxide, which is originated by the formation of nanoporous alumina templates. Different templates have been fabricated by the conventional two-step anodization procedure in oxalic acid. Their porosities were modified by chemical wet etching allowing the tuning of their effective refractive indexes (air-filled nanopores + anodic aluminium oxide). By standard spectroscopic light transmission measurements, the effective refractive index for each different template was extracted in the VIS-NIR region. The determination of the intrinsic anodic aluminium oxide refractive index was performed by using the Maxwell-Garnett homogenization theory. The results are coincident for all the fabricated samples. The obtained refractive index (∼1.55) is quite lower (∼22%) than the commonly used AlO handbook value (∼1.75), showing that the amorphous nature of the anodic oxide structure strongly conditions its optical properties. This difference is critical for the correct design and modeling of optical plasmonic metamaterials based on anodic aluminium oxide nanoporous templates., The authors acknowledge the financial support from Spanish MINECO under project FIS2013-45469-C4-4-R and FCT of Portugal under projects UID/EEA/50014/2013 and UID/NAN/50024/2013, and NORTE-07-0124-FEDER-000070 –Multifunctional Nanomaterials and NORTE-07-0124-FEDER-000058, which are financed by the North Portugal Regional Operational Programme (ON.2–O Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF), and by national funds, through the Portuguese funding agency, FCT. A Hierro-Rodriguez and J M Teixeira acknowledge support from FCT of Portugal (Grants SFRH/BPD/90471/2012 and SFRH/BPD/72329/2010, respectively) and POPH/FSE programs., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning interfacial domain walls in GdCo/Gd/GdCo′ spring magnets

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Vélez, María
  • Alameda, J. M.
  • Martín, José Ignacio
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY).-- et al., Spring magnets based on GdCo multilayers have been prepared to study the nucleation and evolution of interfacial domain walls (iDWs) depending on layer composition and interlayer coupling. GdCo alloy compositions in each layer were chosen so that their net magnetization aligns either with the Gd (Gd35Co65) or Co(Gd11Co89) sublattices. This condition forces an antiparallel arrangement of the layers' net magnetization and leads to nucleation of iDWs above critical magnetic fields whose values are dictated by the interplay between Zeeman and exchange energies. By combining x-ray resonant magnetic scattering with Kerr magnetometry, we provide detailed insight into the nucleation and spatial profile of the iDWs. For strong coupling (GdCo/GdCo′ bilayer), iDWs are centered at the interface but with asymmetric width depending on each layer magnetization. When interlayer coupling is weakened by introducing a thin Gd interlayer, the exchange spring effect becomes restricted to a lower temperature and field range than observed in the bilayer structure. Due to the ferromagnetic alignment between the high magnetization Gd35Co65 layer and the Gd interlayer, the iDW shrinks and moves into the lower exchange Gd interlayer, causing a reduction of iDW energy., Work supported by Spanish Ministerio de Economía y Competitividad (MINECO) under grant FIS2013-45469 and Spanish Ministerio de Ciencia e Innovacion (MICINN) under grant FIS2008-06249. Work at Argonne was supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unravelling the tunable exchange bias-like effect in magnetostatically-coupled two dimensional hybrid (hard/soft) composites

  • Hierro-Rodríguez, Aurelio
  • Teixeira, J. M.
  • Rodríguez-Rodríguez, G.
  • Rubio, Honorino
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
Hybrid 2D hard-soft composites have been fabricated by combining soft (Co73Si27) and hard (NdCo5) magnetic materials with in-plane and out-of-plane magnetic anisotropies, respectively. They have been microstructured in a square lattice of CoSi anti-dots with NdCo dots within the holes. The magnetic properties of the dots allow us to introduce a magnetostatic stray field that can be controlled in direction and sense by their last saturating magnetic field. The magnetostatic interactions between dot and anti-dot layers induce a completely tunable exchange bias-like shift in the system’s hysteresis loops. Two different regimes for this shift are present depending on the lattice parameter of the microstructures. For large parameters, dipolar magnetostatic decay is observed, while for the smaller one, the interaction between the adjacent anti-dot’s characteristic closure domain structures enhances the exchange bias-like effect as clarified by micromagnetic simulations., This work was supported by Portuguese FCT under project PTDC/FIS/119027/2010 (FCOMP-01-0124-FEDER-020713) and Spanish MINECO under grant FIS2013-45469. A Hierro-Rodriguez and J M Teixeira acknowledge support from FCT of Portugal (Grant Nos. SFRH/BPD/90471/2012 and SFRH/BPD/72329/2010, respectively)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Caracterización de la anisotropía magnética perpendicular de láminas continuas y multicapas de DyCo5

  • Blanco-Roldán, C.
  • Hierro-Rodríguez, Aurelio
  • Díaz, Javier
  • Valdés-Bango, F.
  • Teixeira, J. M.
  • Rubio, Honorino
  • Martín, José Ignacio
  • Quirós, Carlos
  • Alameda, J. M.
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015.-- et al., [Introducción]: Las láminas delgadas de aleaciones amorfas de tierra rara y metal de transición han sido ampliamente estudiadas por la posibilidad de controlar sus propiedades magnéticas mediante una elección adecuada de su composición y grosor. En este trabajo analizamos el comportamiento magnético de dos aleaciones amorfas de DyCo5, una preparada en forma de lámina continua y otra en forma de multicapa de periodo ultrafino, mediante el análisis combinado de ciclos de histéresis globales, obtenidos mediante técnicas de magnetometría, y de ciclos específicos al Dy y al Co, obtenidos mediante dicroísmo magnético circular de rayos X (XMCD). Además, los resultados obtenidos se comparan con los de láminas de referencia de YCo5, preparadas con el fin de extraer el comportamiento magnético de los átomos de Co en un entorno químico similar al de las aleaciones de DyCo5. Nuestros resultados complementan los publicados recientemente para aleaciones de DyCo3, aunque en nuestro caso hemos realizado una caracterización a campos magnéticos más elevados y hemos aplicado una interpretación compatible con los modelos esperimagnéticos característicos de este sistema. [Experimental]: Las muestras, de 35 nm de grosor, han sido preparadas por pulverización catódica de blancos de Dy (pureza 99.9 % atómico), Y (99.9 % atómico) y Co (99.99 % atómico) a una presión de Ar+ de 2.9 x 10-3 mbar. Todas las muestras tienen una capa protectora de 3.5 nm de grosor y una capa de transición, directamente sobre el sustrato, de 5 nm de grosor, ambas de Al. Su composición ha sido estimada mediante medidas de fluorescencia de rayos X obtenidas en una microsonda electrónica (EPMA, modelo CAMECA SX-100) de los Servicios Científico-Técnicos de la Universidad de Oviedo. Las propiedades magnéticas se han determinado utilizando dos métodos complementarios. En primer lugar, medidas de magnetometría por muestra vibratoria (VSM) con campos magnéticos perpendiculares a la superficie (hasta 9 T) y mediante un dispositivo superconductor de interferencia cuántica (SQUID), con campos paralelos y perpendiculares a la superficie de la muestra (hasta 6 T), han dado cuenta del comportamiento magnético global del sistema entre 5 K y 300 K. Por otro lado, ciclos de histéresis específicos del Dy y del Co se han obtenido mediante XMCD (hasta 6 T) utilizando radiación sincrotrón circularmente polarizada a energías correspondientes a los bordes M5 del Dy y L3 del Co. Tanto en el caso del DyCo5 como del YCo5, se han crecido dos tipos de muestras. En el primer caso, muestras denominadas S, se han encendido simultáneamente ambos blancos de Dy y Co hasta completar los 35 nm de grosor. En el segundo caso, muestras denominadas A, se han ido encendiendo y apagando alternativamente los blancos de Dy y de Co, preparando capas puras alternas de Dy y de Co con grosores nominales en el entorno de la monocapa, pero con una composición neta promedio y espesor final similares a los de la muestra DyCoS. Las medidas de composición indican que ambas muestras están en torno a la estequiometría esperada, con una diferencia del 1-2 % atómico. El mismo proceso de crecimiento se ha llevado a cabo con las muestras de referencia de YCo5., [Resultados]: Las medidas de magnetometría realizadas con campos aplicados en el plano y fuera del plano de la lámina indican que las muestras de DyCo5 tienen anisotropía perpendicular, mientras que las de YCo5 carecen de ella. Teniendo en cuenta que el YCo5 y el DyCo5 tienen una estructura atómica y un entorno químico similares, con la salvedad de que el Y es no magnético y el Dy sí lo es, se puede concluir que el Co no es el causante de la anisotropía perpendicular observada en las muestras de DyCo5. Además, se observa que los campos coercitivos perpendiculares aumentan al enfriar, en buen acuerdo con lo esperado en modelos de anisotropía aleatoria y canje. Se confirma el comportamiento ferrimagnético de las aleaciones con temperaturas de compensación de 120 K para la muestra DyCoS y 90 K para la lámina DyCoA. La diferencia en el valor de temperatura de compensación puede deberse a la ligera modificación de la composición mencionada anteriormente, puesto que en este tipo de materiales se ha observado que variaciones muy leves de composición, en torno al 1 % atómico, generan cambios de la temperatura de compensación de varias decenas de K. Por otro lado, los ciclos XMCD selectivos al elemento tienen sentidos opuestos para el caso del Dy y del Co. Además, se observan pendientes en los ciclos compatibles con la presencia de una distribución de momentos magnéticos en forma de conos, de acuerdo con lo esperado en aleaciones esperimagnéticas. La evolución de estos ciclos en función de la temperatura confirma la inversión de la orientación de los momentos magnéticos del Dy y del Co a ambos lados de la temperatura de compensación y sugiere cambios en la estructura de los conos observados a medida que se enfría el sistema., Este trabajo ha sido financiado por el proyecto MINECO FIS2013-45469. C. B.-R. agradece financiación a través del programa JAE-Predoc del CSIC. A. H.-R. y J. M. T. agradecen la financiación de la FCT Portuguesa (Refs. SFRH/BPD/90471/2012 y SFRH/BPD/72329/2010)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning interfacial domain walls in GdCo/Gd/GdCo' spring magnets

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Vélez, María
  • Alameda, J. M.
  • Martín, José Ignacio
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015.-- et al., Exchange coupled multicomponent ―spring-magnet” systems that combine ferrimagnetic and ferromagnetic materials are the focus of a renewed interest due to their potential as recording media with tailored magnetic behavior. Different geometries such as thin film heterostructures, coreshell nanoparticles or hard/soft lateral nanocomposites are employed in order to optimize system properties for specific applications. In particular, amorphous ferrimagnetic Rare Earth (RE) - Transition Metal (TM) alloys, with their strongly temperature dependent magnetic properties allow to tune important parameters such as spin polarization and magnetic moments and multilayers based in these ferrimagnetic alloys have been used to produce different magnetic behaviors such as macroscopic ferrimagnet states, macroscopic spin-flip like metamagnetic states or giant exchange bias. In these systems, exchange coupling gives rise to interfacial domain walls (DW) that govern the full magnetic behavior of the multicomponent system. GdxCo1-x amorphous alloys are RE-TM ferrimagnetic materials where the Gd and Co moments are antiferromagnetically coupled and collinear. Depending on the composition and temperature, the net magnetization in these alloys can be aligned either with the Co or the Gd moments. Therefore, it is possible to prepare exchange coupled GdxCo1-x/GdyCo1-y bilayers in which the net magnetization of each of the layers is dominated by a different kind of magnetic moments (i.e., by the Gd or Co moments). Interfacial exchange coupling between Co atoms at each layer results in the antiparallel alignment of the magnetization in each of them at remanence. Then, in the presence of an in-plane magnetic field of increasing magnitude, the system must switch to a parallel magnetization configuration and a Bloch wall across the thickness is created at the interface. The extension, position and symmetry of these walls respect to the interface plane, and their field and temperature dependence control the characteristic switching fields in the hysteresis loop. In this work, we have prepared GdxCo1-x/Gd/GdyCo1-y trilayers by sputtering in which a Gd layer with variable thickness is introduced at the interface in order to modulate the strength of the ―spring magnet” effect in the system. As Gd thickness increases from 0 to 30 nm, coupling between the upper GdxCo1-x and lower GdyCo1-y layers weakens due to the much smaller Gd-Gd exchange interactions in comparison with Co-Co exchange. Magnetooptical Kerr effect hysteresis loops (sensitive to Co magnetization at the upper layer) show that, as a consequence, the characteristic fields for nucleation of DWs across the thickness are reduced and the ―spring-magnet” effect becomes restricted to a lower temperature range., X-ray resonant magnetic scattering (XRMS) measurements at APS Argonne NL have been used to determine the depth profile of Gd magnetic moments configuration as a function of applied magnetic field. Figure 1 shows XRMS data at 50 K for a 50 nm Gd35Co65/8 nm Gd/50 nm Gd11Co89 trilayer at different applied fields (either with or without interfacial DW). Fitted magnetization depth profiles of XRMS reflectivity data in a 50 nm Gd35Co65/50 nm Gd11Co89 bilayer show clear asymmetries in DW width at each side of the interface (9.4 nm at Gd11Co89 vs. 2.2 nm at Gd35Co65), in agreement with the different saturation magnetization in each layer. In the trilayers, this asymmetry is enhanced and the DW becomes localized at the Gd/Gd11Co89 interface in which Gd-Gd exchange interactions determine the strength of the effective ―spring-magnet”., Work supported by Spanish MINECO under grants FIS2008-06249 and FIS2013-45469. Work at Argonne was supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Topological defects in weak perpendicular magnetic anisotropy nanostructures

  • Vélez, María
Resumen del trabajo presentado al International Workshop on Vortex Matter in Superconductors, celebrado en El Escorial, Madrid (España) del 10 al 15 de mayo de 2015., Complex spin textures found in different kinds of magnetic systems can be described in terms of topological defects in the magnetization such as vortices in magnetic dots, half vortices and domain walls in nanowires, dislocations and disclinations in weak stripe domains or skyrmions in helical magnets. These magnetic defects usually present an enhanced stability due to their non-trivial topology which makes them interesting for magnetic logic and memory devices. Also, interplay between complex magnetic configurations and superconductivity provides a rich playground to tune the phase diagram of superconducting/magnetic hybrids. In this work, we present a study of topological defects in weak perpendicular magnetic nanostructures fabricated by e-beam lithography and sputtering on amorphous Nd-Co films and multilayers. First, periodic film thickness modulations have been used to fabricate lateral magnetic multilayers in the magnetic stripe domain pattern. During inplane hard axis magnetization reversal, magnetic stress at the interfaces leads to the dissociation of high-Burgers vector dislocations into ½ disclination pairs. Coupling between in-plane closure domain structure and ½ disclinations leads to the nucleation of arrays of ½ skyrmion (meron) magnetic textures (see Fig. 1) depending on magnetic history and nanostructure geometry. Then, micromagnetic simulations and microscopy techniques have been used to analyse the conditions for magnetic meron nucleation and propagation during magnetization reversal of extended thin films and multilayers of weak perpendicular anisotropy materials., Work supported by Spanish MINECO (FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Películas nanoestructuradas de PS-b-P4VP con ácido fórmico

  • Losada Ambrinos, Raquel
Memoria realizada en el Departamento de Química Orgánica e Inorgánica de la Universidad de Oviedo como Trabajo Fin de Máster en Química y Desarrollo Sostenible., Este trabajo ha sido financiado con cargo al proyecto: FIS2013-45469., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Multicapas magnéticas

  • Estébanez, Irene
Doble grado física-matemáticas (Opción B)., Las multicapas magnéticas son estructuras artificiales formadas por láminas que contienen distintos elementos magnéticos. Debido a sus extraordinarias propiedades, han conseguido llamar la atención de la comunidad científica. El interés por este tipo de estructuras se remonta a las décadas de 1950 y 1960, cuando Louis Néel y sus colaboradores se embarcaron en el estudio de las propiedades físicas prensentes en láminas delgadas y multicapas. Estos primeros trabajos, abarcaron el estudio de paredes de tipo Bloch y Néel, acoplamientos entre láminas ferromagnéticas separadas por un espaciador no magnético, anisotropías por efectos de superficie y acoplamiento de materiales ferromagnéticos y antiferromagnéticos. Desde entonces, no han parado de publicarse artículos en un campo que, debido a la creciente mejora de técnicas de fabricación en alto vacío y ultra alto vacío, está en alza. Es más, no solo se han producido avances que permiten un crecimiento más controlado de láminas delgadas y multicapas, también se han mejorado las técnicas de caracterización estructural y magnética. Por ejemplo, el uso de rayos X de ángulo bajo ha proporcionado una herramienta muy útil para determinar las características de las distintas capas en una multicapa, como pueden ser su espesor o su rugosidad. Los sincrotrones suponen un paso adelante al proporcionar fuentes de rayo X con mayor brillantez que permiten nuevos métodos de análisis como la microscopía de rayos X o el análisis de la configuración magnética a partir de efectos de dicroismo. Todos estas nuevas técnicas, en su conjunto, han resultado en un mayor conocimiento de los fenómenos magnéticos. De todos estos nuevos fenómenos magnéticos descubiertos gracias al estudio de multicapas, hay uno que destaca sobre el resto. La magnetoresistencia gigante, GMR por sus siglas en inglés «Giant magnetoresistance», se ha convertido en uno de los hallazgos más importantes de las últimas décadas. Sus descubridores, los investigadores Albert Fert (París, Francia) y Peter Gruenberg (Julich, Alemania), notificaron, alrededor de 1985, y de manera independiente, la existencia de pruebas experimentales de un fenómeno de magnetoresistencia gigante. Tales fueron las implicaciones de esta revelación que, en 2007, ambos fueron galardonados con el Premio Nobel de Física. La industria del almacenamiento de datos es la mayor beneficia de la GMR. IBM fue la primera empresa en sacar al mercado discos duros basados en la tecnología GMR, y hoy en día todas las unidades de disco hacen uso de ella. Por último, se hace necesario destacar que el estudio de materiales magnéticos basados en multicapas simétricas y asimétricas resulta un paso previo y básico para el desarrollo de aplicaciones de grabado magnético de alta densidad., Este trabajo de Fin de Grado se engloba dentro de un proyecto de investigación de la Universidad de Oviedo: >Interacción y manipulación de defectos topológicos: nanoestructura y multicapas magnéticas>, financiado por el MINECO (MINECO-13-FIS2013-45469-C4-4-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Determination of the out-of-plane anisotropy contributions (first and second anisotropy terms) in amorphous Nd-Co thin films by micromagnetic numerical simulations

  • Álvarez-Prado, L. M.
  • Cid, Rosalía
  • Morales, Rafael
  • Díaz, Javier
  • Vélez, María
  • Rubio, Honorino
  • Hierro-Rodríguez, Aurelio
  • Alameda, J. M.
Amorphous Nd-Co thin films exhibit stripe shaped periodic magnetic domains with local out-of-plane magnetization components due to their perpendicular magnetic anisotropy. This anisotropy has been quantified in a fairly simple way by reproducing the experimental magnetization curves by means of micromagnetic numerical simulations. The simulations show that the first (K1) and second (K2) anisotropy constants must be used to properly describe the variation of the stripe domains with the in plane applied magnetic field. A strong temperature dependence of both K1 and K2 has been obtained between 10 K and room temperature. This anisotropy behavior is characteristic of two magnetically coupled 3d-4f sublattices with competing anisotropies., The authors acknowledge the financial support from Spanish MINECO under projects FIS2013-45469 and FIS2016-76058 (AEI/FEDER,UE). A. Hierro-Rodriguez acknowledge support from FCT of Portugal (Grant SFRH/BPD/90471/2012) and POPH/FSE programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic order and disorder in nanomagnets probed by superconducting vortices

  • Rollano, Víctor
  • Valle, Javier del
  • Gómez, Alicia
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Quirós, Carlos
  • Martín, José Ignacio
  • Osorio, M. R.
  • Granados, D.
  • González, Elvira M.
  • Vicent, J. L.
We have studied two nanomagnet systems with strong (Co/Pd multilayers) and weak (NdCo alloy films) stray magnetic fields by probing the out-of-plane magnetic states with superconducting vortices. The hybrid samples are made of array of nanomagnets embedded in superconducting Nb thin films. The vortex motion detects relevant magnetic state features, since superconducting vortices are able to discriminate between different magnetic stray field strengths and directions. The usual matching effect between the superconducting vortex lattice and the periodic pinning array can be quenched by means of disorder magnetic potentials with strong stray fields at random. Ordered stray fields retrieve the matching effect and yield asymmetry and shift in the vortex dissipation signal. Furthermore vortices can discriminate the sizes of the nanomagnet magnetic domains, detecting magnetic domain sizes as small as 70 nm. In addition, we observe that the vortex cores play the crucial role instead of the supercurrents around the vortex., We thank Spanish MINECO grants FIS2013-45469, FIS2016-76058 (AEI/FEDER, UE), Spanish CM grant S2013/MIT-2850. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). DG acknowledges RYC-2012-09864, S2013/MIT-3007 and ESP2015-65597-C4-3-R for financial support., Peer reviewed