Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of well-ordered silicon nanopillars embedded in a microchannel via metal-assisted chemical etching: a route towards an opto-mechanical biosensor

  • Solis-Tinoco, V.
  • Marquez, S.
  • Sepúlveda, Borja
  • Lechuga, Laura M.
Ordered nanopillars have been used as a smart configuration to design and fabricate localized surface plasmon resonance (LSPR) sensors. Importantly, these nanostructures can be integrated within microfluidic channels as a novel opportunity to enhance the response of biosensors and also to control the fluid flow by modifying the wettability surface of the walls. In this work, we demonstrate a large-scale and low-cost nanofabrication methodology that integrates the fabrication of silicon nanopillars (SiNPs) inside a microfluidic channel. The strategy is based on placing a catalytic gold layer patterned with nanoholes inside a SU-8 microchannel, by combining nanosphere lithography, reactive ion etching, and e-beam gold deposition, to control the area, separation distance and diameter of the nanostructures. The height of the SiNPs strongly depends on a well-controlled metal-assisted silicon etching protocol. We demonstrate experimentally that the design and the cleaning of the catalytic gold mesh using ultraviolet ozone strongly affect the etching rate for the formation of large-surface-area nanopillars. Our results explain the fast fabrication of hexagonal arrays of SiNPs embedded in a microfluidic channel with varying aspect ratio from 2 to 7 and separation of 300 nm and 400 nm, respectively, which has important implications for the achievement of new optomechanical biosensors., V. Solis-Tinoco & S. Marquez acknowledge financial support from “Programa becas en el extranjero” from National Council for Science and Technology (CONACyT-Mexico). The nanoB2A is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament d'Universitats, Recerca i Societat de la Informacio de la Generalitat de Catalunya (2014 SGR 624). ICN2 is the recipient of Grant SEV-2013-0295 from the “Severo Ochoa Centers of Excellence” Program of Spanish MINECO. We acknowledged financial support of MINECO, projects FIS2013-49280-EXP, MAT2011-12645-E., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metamirrors based on arrays of silicon nanowires with height gradients

  • Otte, Marinus A.
  • García-Martín, Antonio
  • Borrisé, Xavier
  • Sepúlveda, Borja
Arrays of silicon nanowires with height gradients fabricated using metal-assisted chemical etching act as tunable metamirrors enabling light focusing the reflected light in arbitrary shapes. Metamirrors with non-cylindrical nanowires can simultaneously focus the reflected light and induce strong polarization conversion effect., The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) projects MAT2013-48628-R, FIS2013-49280-EXP, and MAT2011-12645-E and Comunidad the Madrid project S2013/MIT-2740. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metamirrors Based on Arrays of Silicon Nanowires with Height Gradients

  • Otte Ortiz, Marinus Albertus
  • García Martín, Antonio
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Sepúlveda, Borja|||0000-0002-1562-7602
Arrays of silicon nanowires with height gradients fabricated using metal-assisted chemical etching act as tunable metamirrors enabling light focusing the reflected light in arbitrary shapes. Metamirrors with non-cylindrical nanowires can simultaneously focus the reflected light and induce strong polarization conversion effect.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fabrication of well-ordered silicon nanopillars embedded in a microchannel, Via metal-assisted chemical etching: A route towards an opto-mechanical biosensor

  • Solís Tinoco, Verónica Iraís|||0000-0001-8797-7559
  • Márquez, Salomón|||0000-0001-8434-6778
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Lechuga, Laura M.|||0000-0001-5187-5358
Ordered nanopillars have been used as a smart configuration to design and fabricate localized surface plasmon resonance (LSPR) sensors. Importantly, these nanostructures can be integrated within microfluidic channels as a novel opportunity to enhance the response of biosensors and also to control the fluid flow by modifying the wettability surface of the walls. In this work, we demonstrate a large-scale and low-cost nanofabrication methodology that integrates the fabrication of silicon nanopillars (SiNPs) inside a microfluidic channel. The strategy is based on placing a catalytic gold layer patterned with nanoholes inside a SU-8 microchannel, by combining nanosphere lithography, reactive ion etching, and e-beam gold deposition, to control the area, separation distance and diameter of the nanostructures. The height of the SiNPs strongly depends on a well-controlled metal-assisted silicon etching protocol. We demonstrate experimentally that the design and the cleaning of the catalytic gold mesh using ultraviolet ozone strongly affect the etching rate for the formation of large-surface-area nanopillars. Our results explain the fast fabrication of hexagonal arrays of SiNPs embedded in a microfluidic channel with varying aspect ratio from 2 to 7 and separation of 300 nm and 400 nm, respectively, which has important implications for the achievement of new optomechanical biosensors.