Skip to main content

GENERACION, TRANSPORTE Y EFECTOS DE ELECTRONES EN MATERIA CONDENSADA

FIS2014-58849-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE MURCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Energy deposition around swift proton tracks in polymethylmethacrylate: How much and how far

  • Dapor, Maurizio
  • Abril, Isabel
  • Vera Gomis, Pablo de
  • García Molina, Rafael
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
The use of proton beams in several modern technologies to probe or modify the properties of materials, such as proton beam lithography or ion beam cancer therapy, requires us to accurately know the extent to which the energy lost by the swift projectiles in the medium is redistributed radially around their tracks, since this determines several endpoints, such as the resolution of imaging or manufacturing techniques, or even the biological outcomes of radiotherapy. In this paper, the radial distribution of the energy deposited around swift-proton tracks in polymethylmethacrylate (PMMA) by the transport of secondary electrons is obtained by means of a detailed Monte Carlo simulation. The initial energy and angular distributions of the secondary electrons generated by proton impact, as well as the electronic cross sections for the ejection of these electrons, are reliably calculated in the framework of the dielectric formalism, where a realistic electronic excitation spectrum of PMMA is accounted for. The cascade of all secondary electrons generated in PMMA is simulated taking into account the main interactions that occur between these electrons and the condensed phase target. After analyzing the influence that several angular distributions of the electrons generated by the proton beam have on the resulting radial profiles of deposited energy, we conclude that the widely used Rudd and Kim formula should be replaced by the simpler isotropic angular distribution, which leads to radial energy distributions comparable to the ones obtained from more realistic angular distributions. By studying the dependence of the radial dose on the proton energy we recommend lower proton energies than previously published for reducing proximity effects around a proton track. The obtained results are of relevance for assessing the resolution limits of proton beam based imaging and manufacturing techniques.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Inelastic scattering and energy loss of swift electron beams in biologically relevant materials

  • García Molina, Rafael
  • Abril, Isabel
  • Kyriakou, Ioanna
  • Emfietzoglou, Dimitris
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
The inelastic mean free path and the stopping power of swift electrons in relevant biomaterials, such as liquid water, DNA, protein, lipid, carotene, sugar, and ice are calculated in the framework of the dielectric formalism. The Mermin Energy Loss Function – Generalized Oscillator Strength model is used to determine the energy loss function of these materials for arbitrary energy and momentum transfer using electron energy-loss spectroscopy data as input. To ensure the consistency of the model, efforts are made so that both the Kramers–Kronig and f-sum rules are fulfilled to better than 2%. Our findings indicate sizeable differences in the inelastic mean free path and stopping power among these biomaterials for low-energy electrons. For example, at 100-eV electron energy, the inelastic mean free path in protein is 25% smaller than for water and around 10% smaller than for the other biomaterials. The stopping power values of protein, DNA, and sugar are rather similar but 20% larger than for water. Taking into account these results, we conclude that electron interactions with living tissues at the nanometric scale cannot be reliably described using only liquid water as the surrogate of the biological target.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Simulation of the energy spectra of swift light ion beams after traversing cylindrical targets: a consistent interpretation of experimental data relevant for hadron therapy

  • Vera Gomis, Pablo de
  • García Molina, Rafael
  • Abril, Isabel
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
We have performed detailed simulations of the energy spectra, recorded at several angles, of proton and helium ion beams after traversing thin cylindrical targets of different nature (liquid water and ethanol jets, as well as a solid aluminium wire), in order to reproduce a series of measurements intended to assess the stopping power of 0.3–2 MeV ions. The authors of these experiments derived values of the stopping power of liquid water (a quantity essential for the evaluation of radiation effects in materials, particularly for radiotherapy purposes) that are ~10% lower than what is expected from other measurements and theories. In our simulations, instead of treating the stopping power as an unknown free parameter to be determined, we use as input the electronic stopping power accurately calculated within the dielectric formalism. We take into account in the simulations the different interactions that each projectile can experience when moving through the target, such as electronic stopping, nuclear scattering or electron charge-exchange processes. The detailed geometry of the target is also accounted for. We find that our simulated energy distributions are in excellent agreement with the published measurements when the diameter of the cylindrical targets is slightly reduced, what is compatible with the potential evaporation of the liquid jets. On the basis of such an excellent agreement, we validate the accuracy of the model we use to calculate electronic excitation cross sections for ions in condensed matter in its range of applicability (particularly the electronic stopping power) needed for charged particle transport models, and we offer a consistent, but alternative, interpretation for these experiments on ion irradiation of cylindrical targets.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Simulation of the secondary electrons energy deposition produced by proton beams in PMMA: influence of the target electronic excitation description

  • Dapor, Maurizio
  • Abril, Isabel
  • Vera Gomis, Pablo de
  • García Molina, Rafael
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
We have studied the radial dependence of the energy deposition of the secondary electron generated by swift proton beams incident with energies T = 50 keV–5 MeV on poly(methylmethacrylate) (PMMA). Two different approaches have been used to model the electronic excitation spectrum of PMMA through its energy loss function (ELF), namely the extended-Drude ELF and the Mermin ELF. The singly differential cross section and the total cross section for ionization, as well as the average energy of the generated secondary electrons, show sizeable differences at T ⩽ 0.1 MeV when evaluated with these two ELF models. In order to know the radial distribution around the proton track of the energy deposited by the cascade of secondary electrons, a simulation has been performed that follows the motion of the electrons through the target taking into account both the inelastic interactions (via electronic ionizations and excitations as well as electron-phonon and electron trapping by polaron creation) and the elastic interactions. The radial distribution of the energy deposited by the secondary electrons around the proton track shows notable differences between the simulations performed with the extended-Drude ELF or the Mermin ELF, being the former more spread out (and, therefore, less peaked) than the latter. The highest intensity and sharpness of the deposited energy distributions takes place for proton beams incident with T ~ 0.1–1 MeV. We have also studied the influence in the radial distribution of deposited energy of using a full energy distribution of secondary electrons generated by proton impact or using a single value (namely, the average value of the distribution); our results show that differences between both simulations become important for proton energies larger than ~0.1 MeV. The results presented in this work have potential applications in materials science, as well as hadron therapy (due to the use of PMMA as a tissue phantom) in order to properly consider the generation of electrons by proton beams and their subsequent transport and energy deposition through the target in nanometric scales.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Inelastic mean free path of low-energy electrons in condensed media: beyond the standard models

  • Emfietzoglou, Dimitris
  • Kyriakou, Ioanna
  • García Molina, Rafael
  • Abril, Isabel
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
The most established approach for ‘practical’ calculations of the inelastic mean free path (IMFP) of low-energy electrons (~10 eV to ~10 keV) is based on optical-data models of the dielectric function. Despite nearly four decades of efforts, the IMFP of low-energy electrons is often not known with the desired accuracy. A universal conclusion is that the predictions of the most popular models are in rather fair agreement above a few hundred electron volts but exhibit considerable differences at lower energies. However, this is the energy range where their two main approximations, namely, the random-phase approximation (RPA) and the Born approximation, may be invalid. After a short overview of the most popular optical-data models, we present an approach to include exchange and correlation (XC) effects in IMFP calculations, thus going beyond the RPA and Born approximation. The key element is the so-called many-body local-field correction (LFC). XC effects among the screening electrons are included using a time-dependent local-density approximation for the LFC. Additional XC effects related to the incident and struck electrons are included through the vertex correction calculated using a screened-Hubbard formula for the LFC. The results presented for liquid water reveal that XC may increase the IMFP by 15–45% from its Born–RPA value, yielding much better agreement with available experimental data. The present work provides a manageable, yet rigorous, approach to improve upon the standard models for IMFP calculations, through the inclusion of XC effects at both the level of screening and the level of interaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Energy loss of H+ and H2+ beams in carbon nanotubes: a joint experimental and simulation study

  • Valdés, Jorge E.
  • Celedón, Carlos
  • Mery, Mario
  • Uribe, Juan D.
  • Segura, Rodrigo
  • Arista, Néstor R.
  • Abril, Isabel
  • García Molina, Rafael
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
Carbon nanotube properties can be modified by ion irradiation; therefore it is important to know the manner in which ions deposit energy (how much and where) in the nanotubes. In this work, we have studied, experimentally and with a simulation code, the irradiation of multi-walled carbon nanotubes (MWCNT), supported on a holey amorphous carbon (a-C) substrate, with low energy (2–10 keV/u) H+ and H2+ molecular beams, impinging perpendicularly to the MWCNT axis. The energy distribution of protons traversing the nanotubes (either from the H+ beam or dissociated from the H2+ beam) was measured by the transmission technique in the forward direction. Two well-differentiated peaks appear in the experimental energy-loss distribution of the fragments dissociated from the molecular H2+ beam, in correspondence to the ones detected with the proton beam. One is the low-energy loss peak (LELP), which has a symmetric width; the other is the high-energy loss peak (HELP), which shows an asymmetric broadening towards larger energy loss than the corresponding proton energy distribution. A semi-classical simulation, accounting for the main interaction processes (both elastic and inelastic), of the proton trajectories through the nanotube and the supporting substrate has been done, in order to elucidate the origin of these structures in the energy spectra. Regarding the H+ energy spectrum, the LELP corresponds to projectiles that travel in quasi-channelling motion through the most outer walls of the nanotubes and then pass through the substrate holes, whereas the HELP results mostly from projectiles traversing only the a-C substrate, with the asymmetry broadening being due to a minor contribution of those protons that cross the a-C substrate after exiting the nanotube. The broadening of the peaks corresponding to dissociated fragments, with respect to that of the isolated protons, is the result of vicinage effects between the fragments, when travelling in quasi-channelling conditions through the outer layers of the nanotube, and Coulomb explosion just after exiting the target. The excellent agreement between the measured and the simulated energy spectra of the H+ beam validates our simulation code in order to predict the energy deposited by ion beams in carbon nanotubes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Proton energy loss in multilayer graphene and carbon nanotubes

  • Uribe, Juan D.
  • Mery, Mario
  • Fierro, Bernardo
  • Cardoso-Gil, Raul
  • Abril, Isabel
  • García Molina, Rafael
  • Valdés, Jorge E.
  • Esaulov, Vladimir A.
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
Results of a study of electronic energy loss of low keV protons interacting with multilayer graphene targets are presented. Proton energy loss shows an unexpectedly high value as compared with measurements in amorphous carbon and carbon nanotubes. Furthermore, we observe a classical linear behavior of the energy loss with the ion velocity but with an apparent velocity threshold around 0.1 a.u., which is not observed in other carbon allotropes. This suggests low dimensionality effects which can be due to the extraordinary graphene properties.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Secondary electron spectra of semi-crystalline polymers – A novel polymer characterisation tool?

  • Dapor, Maurizio
  • Masters, Robert C.
  • Ross, Ian
  • Lidzey, David G.
  • Pearson, Andrew
  • Abril, Isabel
  • García Molina, Rafael
  • Sharp, Jo
  • Unčovský, Marek
  • Vystavel, Tomas
  • Mika, Filip
  • Rodenburg, Cornelia
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
The nano-scale dispersion of ordered/disordered phases in semi-crystalline polymers can strongly influence their performance e.g. in terms of mechanical properties and/or electronic properties. However, to reveal the latter in scanning electron microscopy (SEM) often requires invasive sample preparation (etching of amorphous phase), because SEM usually exploits topographical contrast or yield differences between different materials. However, for pure carbon materials the secondary spectra were shown to differ substantially with increased order/disorder. The aims here is to gain an understanding of the shape of secondary electron spectrum (SES) of a widely used semi-crystalline polymer regioregular poly(3-hexylthiophene-2,5-diyl), commonly known as P3HT, and its links to the underlying secondary electron emission mechanisms so SES can be exploited for the mapping the nano-morphology. The comparison of simulated and experimental SES shows an excellent agreement, revealing a peak (at about 0.8 eV) followed by a broad shoulder (between 2 eV and 4.5 eV) with respective relative intensities reflecting order/disorder.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Energy Spectra of Protons and Generated Secondary Electrons around the Bragg Peak in Materials of Interest in Proton Therapy

  • Vera Gomis, Pablo de
  • Abril, Isabel
  • García Molina, Rafael
  • Abril, Isabel|||/items/cfca10a8-c1ac-4706-a8b7-f2215edb97c3
The number and energy of secondary electrons generated around the trajectories of swift protons interacting with biological materials are highly relevant in proton therapy, due to the prominent role of low-energy electrons in the production of biodamage. For a given material, electron energy distributions are determined by the proton energy; and it is imperative that the distribution of proton energy at depths around the Bragg peak region be described as accurately as possible. With this objective, we simulated the energy distributions of proton beams of clinically relevant energies (50–300 MeV) at depths around the Bragg peak in liquid water and the water-equivalent polymer poly(methyl methacrylate) (PMMA). By using a simple model, this simulation has been conveniently extended to account for nuclear fragmentation reactions, providing depth-dose curves in excellent agreement with available experimental data. Special care has been taken to describe the electronic excitation spectrum of the target, taking into account its condensed phase nature. A predictive formula has been obtained for the mean value and the width of the proton energy distribution at the Bragg peak depth, quantities which are found to grow linearly with the initial energy of the beam, in good agreement with available data. To accurately characterize (in number and energy) the electrons generated around the proton paths, the energy distributions of the latter at each depth have been convoluted with the energy-dependent ionization inverse mean free paths. This results in a number of low-energy electrons around the Bragg peak larger than when only the proton beam average energy at the given depths is considered. The convoluted ionization inverse mean free path closely resembles the Bragg curve shape. The average energy of the secondary electrons is nearly constant (∼55 eV for liquid water and ∼43 eV for PMMA) in the plateau of the Bragg curve, independent of the proton incident energy and suddenly decaying once the Bragg peak is reached. These findings highlight the importance of a precise calculation of the proton beam energy distribution as a function of the target depth to reliably characterize the secondary electrons generated around the Bragg peak region.