Skip to main content

MATERIALES HOLOGRAFICOS AVANZADOS PARA FOTONICA VERDE Y TECNOLOGIAS EMERGENTES

FIS2015-66570-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 59
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analysis of holographic polymer-dispersed liquid crystals (HPDLCs) for tunable low frequency diffractive optical elements recording

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holographic polymer dispersed liquid crystals (HPDLCs) are the result of the optimization of the photopolymer fabrication techniques. They are made by recording in a photopolymerization induced phase separation process (PIPS) in which the liquid crystal molecules diffuse to dark zones in the diffraction grating originated. Thanks to the addition of liquid crystal molecules to the composition, this material has a dynamic behavior by reorientation of the liquid crystal molecules applying an electrical field. In this sense, it is possible to use this material to make dynamic devices. In this work, we study the behavior of this material working in low frequencies with different spatial periods of blazed gratings, a sharp profile whose recording is possible thanks to the addition of a Holoeye LCoS-Pluto spatial light modulator with a resolution of 1920 × 1080 pixels (HD) and a pixel size of 8 × 8 μm2. This device allows us to have an accurate and dynamic control of the phase and amplitude of the recording beam.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Blazed Gratings Recorded in Absorbent Photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Phase diffractive optical elements, which have many interesting applications, are usually fabricated using a photoresist. In this paper, they were made using a hybrid optic-digital system and a photopolymer as recording medium. We analyzed the characteristics of the input and recording light and then simulated the generation of blazed gratings with different spatial periods in different types of photopolymers using a diffusion model. Finally, we analyzed the output and diffraction efficiencies of the 0 and 1st order so as to compare the simulated values with those measured experimentally. We evaluated the effects of index matching in a standard PVA/AA photopolymer, and in a variation of Biophotopol, a more biocompatible photopolymer. Diffraction efficiencies near 70%, for a wavelength of 633 nm, were achieved for periods longer than 300 µm in this kind of materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Influence of the spatial frequency on the diffractive optical elements fabrication in PDLCs

  • Fernandez, Roberto
  • Fenoll Gambín, Sandra
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers are classical holographic recording materials. Recently their chemical composition and the fabrication techniques have been optimized for many new applications such as interconnectors, solar concentrations, 2-D photonic structures, or wave-guides. Their potential usefulness has been drastically increased by the introduction of dispersed liquid crystal molecules; these components can be concentrated in the non-exposed zones of the material by a photopolymerization induced phase separation process (PIPS). Therefore, by combining polymer and dispersed liquid crystal (PDLC) has emerged as a new composite material for switchable diffractive optical elements (DOEs). Parallel to the material advances some techniques have been proposed to record very low spatial frequencies DOE’s. Different researchers have reported proposes to record DOE like fork gratings, photonics structures, lenses, sinusoidal, blazed or fork gratings. In this work we have studied the behavior of a PDLC material to record DOE’s with different spatial periods: from 1 μm, using holographic technique, to more than 200 μm, Liquid Cristal on Silicon (LCoS) display working in mostly amplitude mode as a master. Due to the improvement in the spatial light modulation technology and the pixel miniaturization, this technique permits us store gratings with spatial frequencies until few microns. Additionally, this technology permits us an accurate and dynamic control of the phase and the amplitude of the recording beam. In particular, for our case, to generate the blazed gratings, we use an LCoS-Pluto provided by Holoeye with a resolution of 1920x1080 (HDTV) pixels and a pixel size of 7.7x7.7 m2.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Caracterización de lentes holográficas registradas en un fotopolímero compatible con el medio ambiente, Characterization of registered holographic lenses in a photopolymer compatible with the environment

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo se presenta un dispositivo para obtener lentes holográficas (LH) en un fotopolímero compatible medioambientalmente sensibilizado a la longitud de onda de 488 nm. Utilizando este dispositivo se han obtenido LH's, reconstruidas con dos láseres 473 nm y 633 nm), de la misma focal y diámetro, con montajes experimentales simétricos y asimétricos, y positivas y negativas. La calidad de imagen de dichas lentes se ha evaluado: experimentalmente; a partir del cálculo de la MTF y las aberraciones obtenidas capturando con un sensor CCD la imagen del foco (PSF), y teóricamente; mediante software. También se propone un método para mejorar la calidad de imagen de las LH's que tienen más aberraciones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Holographic waveguides in photopolymers

  • Fernandez, Roberto
  • Bleda, Sergio
  • Gallego, Sergi
  • Neipp, Cristian
  • Márquez, Andrés
  • Tomita, Yasuo
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The possibilities that offer the holographic optical elements for photovoltaic and “see through display” applications open new windows for holographic recording materials. In this sense, some specific characteristics are required for each particular application. Waveguides are one of the key elements for these applications. Photopolymers are one of the most competitive candidates for waveguide fabrication. In this work, we evaluate the performance of one example from each of three families of photopolymer material in fabrication of a 633nm waveguide. Firstly, polyvinyl alcohol acrylamide, PVA/AA, the second one, a nanoparticle-thiol-ene, NPC, and on the last place a penta/hexa-acrylate based polymer with dispersed nematic liquid crystal molecules, PDLC. We study the critical role of the material and in particular, spatial resolution for this application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

LED-Cured Reflection Gratings Stored in an Acrylate-Based Photopolymer

  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Morales-Vidal, Marta
  • Ortuño, Manuel
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Pascual, Inmaculada
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The storage of volume holographic reflection gratings in low-toxicity photopolymers represents a challenge at present since they can be used in many important applications such as biosensors and holographic optical elements. In this context, an acrylate-based photopolymer developed in our research group was employed to study the recording of unslanted holographic reflection gratings at high spatial frequencies. The optimal preparation conditions of the photopolymer layers were determinated. The diffraction efficiencies are measured in both recording and curing stage and a comparative study of these values was realized. In addition, a theoretical study using Kogelnik’s coupled wave theory was carried out with the aim of understanding the diffraction efficiency behaviour of both processes. In this work, a maximum diffraction efficiency of 14.1% was reached after a curing process in 150 µm layers at a recording wavelength of 488 nm. This value represents a good result compared to that reported in the literature and opens the way to reflection mode holography research using low-toxicity material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effective modeling of PA-LCoS devices and application in data storage in photopolymers

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Gallego, Sergi
  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel aligned liquid crystal on silicon (PA-LCoS) devices are widely used in many optics and photonics applications to control the amplitude, phase and/or state of polarization (SOP) of light beams. We present a novel model enabling to calculate the voltage dependent retardance provided by PA-LCoS devices for a very wide range of incidence angles and any wavelength in the visible. To our knowledge it represents the most simplified approach still showing predictive capability. We are particularly interested in the application of PA-LCoS microdisplays as the data pager in holographic data storage systems (HDSS). In this work we show both theoretical and experimental results addressing hybrid-ternary modulated (HTM) data pages and using our in-house produced PVA/AA photopolymer as the storage material. We demonstrate that PA-LCoS devices cannot implement pure HTM but a rather close approximation. Experimental results with PVA/AA show bit-error rates (BER) in the range of the threshold for potential application in HDSS (about 10−3).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Caracterización del efecto Anamórfico en un Sistema de Almacenamiento Holográfico de información

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Bleda, Sergio
  • Francés, Jorge
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Presentamos un método de caracterización de un sistema óptico de almacenamiento holográfico. Este sistema utiliza un LCoS de alineación paralela como modulador. Dado que estos PA-LCoS presentan efectos anamór cos queremos medir hasta qué punto estos efectos afectan en el almacenamiento de información. Para esto se estudiará la contribución de los distintos efectos de degradación en el Bit Error Rate obtenido.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analytical modeling of blazed gratings on two-dimensional pixelated liquid crystal on silicon devices

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Neipp, Cristian
  • Ramirez, Manuel G.
  • Calzado Estepa, Eva María
  • Morales-Vidal, Marta
  • Gallego, Sergi
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Phase spatial light modulators and, in particular, parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplays are widely used to display programmable diffractive optical elements (DOEs). These are pixelated elements with inherent different characteristics when compared with DOEs produced with micro-optics fabrication techniques. Specifically, programmable DOEs may be affected by the fill factor, time-flicker, fringing-field and interpixel cross talk effects, and limited and quantized modulation depth of the LCoS device. Among the multilevel DOEs, we focus on the important case of the blazed gratings. We develop the corresponding analytical expressions for the diffracted field where, as novelties of this work, fill factor and flicker are introduced together with phase depth and the number of quantization levels. Different experimental-based normalizations are considered, which may lead to wrong conclusions if the fill factor is not considered in the expressions. We also analyze the differences arising between one- and two-dimensional pixelated devices. When compared with numerical procedures, our approach provides an analytical expression that facilitates the design, prediction, and discussion of experiments. As an application, we prove, for the limiting case of no interpixel cross talk, that multiorder DOEs cannot be more efficient than the equivalent single-order DOE. We also show how the results for DOEs with a unit fill factor can be adapted to DOEs with a fill factor smaller than one with a very efficient procedure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Polymerizable Materials for Diffractive Optical Elements Recording

  • Fernandez, Roberto
  • Navarro-Fuster, Víctor
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The technologies based on holographic and photonic techniques related to the optical storage and optical processing of information are rapidly evolving. One of the key points of this evolution are the new recording materials able to perform under the most specific situations and applications. In this sense, the importance of the photopolymers is growing spectacularly. This is mainly due to their versatility in terms of composition and design together with other interesting properties such as self-processing capabilities. In this chapter, we introduce the diffractive optical elements (DOE) generation in these materials and some of the most important parameters involved in this process. The deep knowledge of the material is essential to model its behavior during and after the recording process and we present different techniques to characterize the recording materials. We also present a 3D theoretical diffusion model able to reproduce and predict the experimental behavior of the recording process of any kind of DOE onto the photopolymers. The theoretical results will be supported by experimental analysis using a hybrid optical-digital setup, which includes a liquid crystal on silicon display. Besides this analysis, we study a method to improve the conservation and characteristics of these materials, an index-matching system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Reflection holograms stored in an environment-friendly photopolymer

  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Ortuño, Manuel
  • Navarro-Fuster, Víctor
  • Martínez Guardiola, Francisco Javier
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In recent years, the development of low-toxicity photopolymers for holographic recording in reflection mode has reached great importance. One of the main advantages of reflection holograms is that they can be reconstructed using white light, which has enabled that many researches have focused on the development of sensors for different types of analytes. Optical data storage and three-dimensional multiplexing of reflection holograms to improve the data storage density have also been investigated through reflection holograms. However, the photopolymers used in these researches have certain undesirable features such as the toxicity of some of their components and non-environmentally compatibility. The common used hydrophilic photopolymers content poly(vinyl alcohol) (PVA) or gelatine binder and monomers related to acrylamide. This compound has a high potential to cause cancer. For this reason, we developed a photopolymer called “Biophotopol” as a recording holographic material for optical applications. “Biophotopol” have a low toxicity, good recycling properties and is environmental-friendly. The basic formulation of “Biophotopol” includes an initiator system which is a free radical generator composed by triethanolamine as co-initiator and plasticizer and sodium salt 5’- 72 riboflavin monophosphate as sensitizer dye, sodium acrylate as polymerizable monomer and PVA as inert binder polymer. Additionally, a cross-linking agent, as N,N’-(1,2-dihydroxyethylene)bisacrylamide (DHEBA) , can also be added. Volume transmission gratins and holographic lens have been fabricated in this photopolymer but not researches have been done to store reflection gratins. Is know that for higher spatial frequencies, the diffraction efficiency decreases considerably as the spatial frequency increases. In this sense, the general aim of this work has been fabricated reflection gratings in the symmetrical experimental setup in “Biophotopol” and to study the dependence of diffraction efficiency on physical thickness, recording intensity and exposure energy. First, films physical thickness was investigated. The maximum diffraction efficiency was obtained for thicknesses around 145 µm. The photopolymer layers uniformity was highly sensitive to drying and environmental conditions during the exposure stage. Therefore, both conditions were investigated and very controlled. An increase in diffraction efficiency was observed when the photopolymer films were cured with a LED lamp to improve the stability of the reflection holograms. The residual dye is eliminated during this process. The maximums diffraction efficiencies around 30 % were obtained for reflection gratings with a spatial frequency of 4738 lines/mm. The index modulation and optical thickness were obtained by fitting procedure through coupled wave theory. Experimental and theoretical results have been interpreted to modify the photopolymer formulation and exposure conditions in order to increase the diffraction efficiencies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Shrinkage measurament for holographic recording materials

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
There is an increasing demand for new holographic recording materials. One of them are photopolymers, which are becoming a classic media in this field. Their versatility is well known and new possibilities are being created by including new components, such as nanoparticles or dispersed liquid crystal molecules in classical formulations, making them interesting for additional applications in which the thin film preparation and the structural modification have a fundamental importance. Prior to obtaining a wide commercialization of displays based on photopolymers, one of the key aspects is to achieve a complete characterization of them. In this sense, one of the main parameters to estimate and control is the shrinkage of these materials. The volume variations change the angular response of the hologram in two aspects, the angular selectivity and the maximum diffraction efficiency. One criteria for the recording material to be used in a holographic data storage application is the shrinkage, maximum of 0.5%. Along this work, we compare two different methods to measure the holographic recording material shrinkage. The first one is measuring the angle of propagation for both diffracted orders ±1 when slanted gratings are recorded, so that an accurate value of the grating vector can be calculated. The second one is based on interference measurements at zero spatial frequency limit. We calculate the shrinkage for three different photopolymers: a polyvinyl alcohol acrylamide (PVA/AA) based photopolymer, one of the greenest photopolymers whose patent belongs to the Alicante University called Biophotopol and on the last place a holographic-dispersed liquid crystal photopolymer (H-PDLC).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analysis of holographic data storage using a PA-LCoS device

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Francés, Jorge
  • Bleda, Sergio
  • Pascual, Inmaculada
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Holographic data storage systems (HDSS) have been a promising and very appealing technology since the first laser developments in the sixties. Impact of ongoing advances in the various components needs to be explored in its specific application to HDSS. In this sense, continuous progress is being produced in spatial light modulator (SLM) technology where parallel-addressed liquid crystal on silicon (PA-LCoS) microdisplays have replaced previous liquid-crystal displays (LCD) in most of optics and photonics applications. PA-LCoS microdisplays are well adapted to display phaseonly elements without coupled amplitude. In this paper, we analyse how PA-LCoS devices can also be used to display the widely applied binary intensity modulated (BIM) data pages. We also investigate hybrid-ternary modulated (HTM) data pages, which are very much demanding on the phase and amplitude modulation properties of an SLM. HTM data pages combine the ease of detection of BIM data pages, together with a large reduction of the DC term of the Fourier Transform of the data page. This reduction is necessary to avoid saturation of the recording material dynamic range. Simulated results show the magnitude of the expected DC term in the Fourier plane. We have verified the good performance of PA-LCoS to display BIM data pages. We have also obtained that pure HTM data pages cannot be produced with PA-LCoS devices, however, a rather close performance is obtained when implementing the pseudo-HTM data pages. In this work a more complete study of pseudo-HTM modulation is offered.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Combining average molecular tilt and flicker for management of depolarized light in parallel-aligned liquid crystal devices for broadband and wide-angle illumination

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We demonstrate a complete semiphysical and analytical model describing the angular and wavelength dependencies not only of retardance, but also its flicker, in parallel aligned liquid crystal (PA-LC) devices. It relies on the fitting of the molecules’ equivalent tilt angle as a function of applied voltage. The wide range of calculations it offers without requiring extensive characterization makes the model unique. We focus on PA-LCoS application as a polarization state generator across the visible spectrum and for a wide range of incidence angles. This approach offers novel capabilities for managing arbitrary states of both full and partial polarization. To highlight the richness of situations with PA-LCoS devices, we provide results for two different digital addressing sequences producing different levels of flicker.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Finite-difference analysis of high demanding computational problems in optical periodic nonlinear media

  • Francés, Jorge
  • Bleda, Sergio
  • Gallego, Sergi
  • Fernandez, Roberto
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Márquez, Andrés
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The application of nonlinear materials in photonic crystals and periodic optical media in general has been extensively investigated in literature but currently numerical simulation, which is necessary in the design of sophisticated photonics devices, is very challenging. The Split-Field Finite-Difference Time-Domain (SF- FDTD) approach is a formulation of FDTD that is specially tailored to efficiently incorporate the periodicity in the algorithm and provides a natural framework for simulating periodic optical media under oblique angle of incidence. Here, this formalism has been adapted for covering second- and third- order nonlinear materials with a tensorial formulation of both nonlinear susceptibilities. Even the method only considers a single period of the structure, the addition of nonlinear materials sets some issues that must be addressed. Firstly, the nonlinear dependence of the electromagnetic field, which is included due to the nonlinear polarization term, must be solved in each time step by means of an additional fixed-point iterative process. Hence, the computational intensity of the method is dramatically affected. Secondly, considering the tensorial behaviour of the second and third-order nonlinear susceptibilities establishes a challenge in terms of computational resources. In order to avoid these drawbacks, High- Performance Computing (HPC) solutions based on GPU and Intel Xeon Phi have been considered. The SF-FDTD method here presented gives the possibility of accurately analyse phenomena such as the second harmonic generation in second-order nonlinear materials, shifting of resonances in resonant gratings due to Kerr effect, bistability effects and all- optical behaviour in two-dimensionally binary gratings with nonlinear material filling the pillars.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Visualization of stokes parameters with the help of rotating–waveplate polarimeter and a liquid crystal on silicon microdisplay

  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Márquez, Andrés
  • Alvarez, Mariela L.
  • Francés, Jorge
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
Mueller-Stokes formalism enable us to deal with polarized and unpolarized light. This formalism is hard to understand by the students because it is a new introduced concept and less intuitive than the Jones formalism. Because of that, we have designed some experiences that help students to understand and see how the Stokes parameters vary in real time. We use two commercially available optoelectronic devices. They are a Rotating Waveplate polarimeter and a Parallel Aligned Liquid Crystal on Silicon (PA-LCoS) microdisplay. The PA-LCoS acts as a variable linear retarder controlled by voltage, and the polarimeter allows us to measure the Stokes parameters in real time, and it shows the representation in the Poincaré Sphere, that it is the most intuitive representation for the Stokes parameters. Apart from the Stokes parameters, we can also use these experiences to introduce the students in a research laboratory, adding some knowledge about using LabView to automate experiments. In addition, we can use these devices and the measurements related to the light polarization to remark some basics concepts about the optical processing of information and the Fourier Transform. These experiences are suitable for different subjects, such as "Fundamentals of Engineering Optics", basic subject included in the second course of the Degree in Telecommunication, for "Photonic Devices and Optoelectronics" mandatory subject taught during the second year of the Master in Telecommunication, or the optative subject “Optical Image Acquisition and Processing” from the Master in Automation and Robotics in the University of Alicante too.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Holographic Characteristics of Photopolymers Containing Different Mixtures of Nematic Liquid Crystals

  • Fenoll Gambín, Sandra
  • Brocal, Francisco
  • Segura, José David
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Brocal, Francisco|||/items/1b681560-35ff-451f-86e5-df4fbf4570d8
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
A holographic polymer dispersed liquid crystal (HPDLC) is used to record holographic diffraction gratings. Several mixtures of nematic liquid crystals (LC) are used as components of the HPDLC to evaluate their influence in static and dynamic basic properties. The diffraction efficiency obtained in the reconstruction of the holograms is evaluated to compare the influence of the different LC. Additionally, the samples are exposed to a variable electric field and the diffracted light intensity as a function of the applied voltage is measured to evaluate the influence of the LC. The results obtained show significant differences depending on the LC incorporated to the photopolymer.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Holographic Lenses in an Environment-Friendly Photopolymer

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Neipp, Cristian
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this paper, we theoretically and experimentally evaluated the quality of volume phase transmission lenses stored in an environmentally friendly photopolymer. Holographic lenses (HLs) were obtained using symmetrical and asymmetrical experimental setups with the same positive and negative focal length and pupil diameter. The image quality was evaluated from the calculation of the modulation transfer function (MTF) by capturing the point spread function (PSF) with a charge-coupled device (CCD). A maximum frequency of 14 L/mm, reaching an MTF value of 0.1, was obtained for a negative asymmetrically recorded HL, evaluated at 473 nm wavelength. A theoretical study of aberrations was carried out to qualitatively evaluate the experimental results obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Anamorphic characterization of a PA-LCoS based holographic data storage system

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Fernandez, Roberto
  • Neipp, Cristian
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
We have included a Parallel Aligned Liquid Crystal on Silicon (PA-LCoS) microdisplay in a Holographic Data Storage System (HDSS). This novel display, widely accepted as Spatial Light Modulator (SLM), presents some advantages and disadvantages. One of these disadvantages is the anamorphic and frequency dependent effect. In this work we want to test this effect and see its effects in the complete optical process involved in the HDSS. We will use stripe-based patterns with different orientation (vertical and horizontal). To check the limits, we will increase the data density by decreasing the minimum stripe width. For evaluating the degradation suffered by the data page, we use the Bit Error Rate (BER) as figure of merit. We make a BER calculation from the statistical analysis of the histogram. In addition to the anamorphic effects we evaluate the degradation effects introduced by the non-uniformity in the illumination. To this goal we divide the image in several regions that are processed in the same way that the entire image. The error analysis of the entire optical system is useful for its calibration and fine adjustment. Once we have characterized the experimental setup we introduce the holographic material. Thus, by making the same analysis, we can evaluate the errors introduced by the material. As holographic material we use Polyvinyl Alcohol Acrylamide (PVA/AA), that has been characterized and developed in previous works by our group.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diffractive lenses in biocompatible photopolymers using LCoS

  • Fernandez, Roberto
  • Gallego, Sergi
  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The improving of the technology related to the Spatial Light Modulators (SLM), which can be used to modulate the wavefront of a light beam in many different applications in Optics and Photonics, has widespread their use in many new ways. In particular, the continue miniaturization of the pixel size let them be used as a master for Diffractive Optical Elements(DOE) recording applications. One of these displays isthe parallel-addressed liquid crystal on silicon (PA-LCoS) microdisplay, which offers easily the possibility of phase-only modulation without coupled amplitude modulation, but can be use also as an amplitude master just rotating the angles of two polarizers. Together with the DOEs, the optic recording material is also one of the crucial componentsin the system. Photoresist has been used classically for this purpose. Recently some works provide results of the incorporation of photopolymers, initially used for holographic recording, to fabricate DOEs. Among photopolymers, polyvinil alcohol/acrylamide (PVA/AA) materials have been studied firstly due to the accurate control of their optical properties and the ease of fabrication. Nevertheless, this kind of photopolymer presents a high level of toxicity due mainly to the monomer, acrylamide. In this sense, we made efforts to search alternative “green” photopolymers, one of these is called “Biophotopol”. This material presents good optical properties; although, it has two principal drawbacks: its refractive index modulation is lower than the PVA/AA one and the dye used presents very low absorption at 532 nm. In order to solve these problems for recording spherical diffractive lenses, in the present work we have explored different possibilities. On the first place, we have modified the fabrication technique of the solid layer to achieve thicker samples, on the second place, we have introduced a biocompatible crosslinker monomer. These two actions provide us a higher value of the phase modulation capability. On the third place, we have modified the dye to record DOE’s with the wavelength of 532 nm and obtain a direct comparison with the results obtained with PVA/AA materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multifunctional monomer based materials for complex low spatial frequency diffractive optical elements recording

  • Fernandez, Roberto
  • Gallego, Sergi
  • Tomita, Yasuo
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We study the behaviour and compare two nanostructurated materials based on multifunc- tional monomers: a nanoparticle-thiol-ene-polymer composite (NPC) and a holographic polymer dispersed liquid crystals (HPDLC) with dipentaerythritol penta/hexa-acrylate (DPHPA) as main monomer. We evaluate their suitability to record complex large grating spacing diffractive optical elements (DOEs), such as blazed gratings. Thus, we can explode their multifunctional capabilities to develop electrically tunable DOEs, thanks to the addition of LC molecules.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Study of the imaging characteristics of holographic waveguides

  • Bleda, Sergio
  • Neipp, Cristian
  • Francés, Jorge
  • Alvarez, Mariela L.
  • Márquez, Andrés
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work we study and characterize and holographic waveguide system composed of two volume diffraction gratings, which act as optical couplers and a glass substrate that acts as a waveguide. The features such us high diffraction efficiencies and Bragg angle selectivity exhibited by volume diffraction gratings allow the appropriated adjustment of the incident light to be diffracted in the direction of total reflection condition inside the glass substrate with high efficiency. In this work the holographic waveguide is recorded on different photopolymer materials, which optimization is controlled to obtain high spatial frequencies and stable fringes. The effect of the shrinkage of the holograms after recording in the quality of the image obtained from the optical waveguide is also studied. To perform the experiments two kind of photopolymers were studied: a nanoparticle-(thiol-ene) polymer composite, NPC, and a penta/hexa-acrylate based polymer with dispersed nematic liquid crystal molecules, PDLC. The holographic characteristics such as diffraction efficiency or wavelength selectivity obtained with the waveguides recorded on the different photopolymers were also studied and compared.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Holographic lenses stored in Biophotopol

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Innovative technologies demand versatile and environmentally compatible optical elements. In this paper we evaluated the quality of volume phase transmission lenses stored in a biocompatible photopolymer. Holographic lenses (HL) have been obtained with the same focal and diameter, for a symmetric and asymmetric experimental setups, and positive and negative focal. The quality of these lenses have been evaluated: theoretically and experimentally, from the calculation of the modulation transfer function (MTF) by capturing the point spread function (PSF) with a CCD sensor. The HLs that have shown better quality are the negative asymmetrically recorded compared with the theoretical ones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Computational split-field finite-difference time-domain evaluation of simplified tilt-angle models for parallel-aligned liquid-crystal devices

  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Simplified analytical models with predictive capability enable simpler and faster optimization of the performance in applications of complex photonic devices. We recently demonstrated the most simplified analytical model still showing predictive capability for parallel aligned liquid crystal on silicon devices (PA-LCoS), which provides the voltage dependent retardance for a very wide range of incidence angles and any wavelength in the visible. In this work we further show that the proposed model is not only phenomenological but it is also physically meaningful, since two of its parameters provide the correct values for important internal properties of these devices related with the birefringence, cell gap and director profile. Therefore, the proposed model can be used as a means to inspect internal physical properties of the cell. Also as a novelty, we also show the applicability of the split-field finite difference time domain (SF-FDTD) technique for phase-shift and retardance evaluation of PA-LCoS devices under oblique incidence. As simplified model for PA-LCoS devices we also consider the exact description of homogeneous birefringent slabs. However, we show that despite its higher degree of simplification the proposed model is more robust, providing unambiguous and physically meaningful solutions when fitting its parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Dimensional changes in slanted diffraction gratings recorded in photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Navarro-Fuster, Víctor
  • Neipp, Cristian
  • Francés, Jorge
  • Fenoll Gambín, Sandra
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers are appealing materials for many optical applications. For most of them, shrinkage plays an important role in the final properties of the display, especially in holographic data storage applications. In this paper, we demonstrate that to quantify correctly the shrinkage, it is mandatory to measure the angle of propagation for both diffracted orders ± 1, so that an accurate value of the grating vector can be calculated. Experimental evidence from three different photopolymers supports this affirmation. Firstly, polyvinyl alcohol acrylamide based photopolymer, which has been studied by many research groups; secondly, one environmentally compatible photopolymer developed by our group; and thirdly, a photopolymer with dispersed liquid crystal molecules. We studied the deviation from the sinusoidal profile analyzing the higher diffracted orders.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Peristrophic multiplexed holograms recorded in a low toxicity photopolymer

  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Multiplexed diffraction gratings were recorded in 300 μm thick layers of biophotopol photopolymer by using two peristrophic multiplexing schemes separately and in combination. In addition, it was shown that riboflavin may be used as polymer initiator in acrylamide photopolymer films and the holographic properties of these films such as diffraction efficiency and dynamic range were compared with those of the biophotopol photopolymer. A variable exposure scheduling method was adopted to store the gratings using a 488 nm Ar laser. Thirteen nearly uniform sinusoidal wave gratings could be recorded in a low toxicity recording medium with a variable exposure energy scheduling method. The diffraction efficiency and dynamic range obtained using the two multiplexing schemes were compared.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Versatile simplified physical model for parallel aligned liquid crystal devices

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Bleda, Sergio
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Liquid crystal on silicon (LCoS) displays have become the most attractive microdisplays for all sort of spatial light modulation applications. Among the different LCoS technologies, parallel aligned LCoS (PA-LCoS) are especially interesting. They offer unique capabilities as spatial light modulators (SLM), since they enable phase-only modulation without coupled amplitude modulation, and with millions of addressable pixels. In this work we evaluate and demonstrate the various capabilities offered by a novel and simplified physical model for parallel aligned liquid crystal devices (PA-LC), thus also applicable to PA-LCoS microdisplays. The model provides the voltage dependent retardance values, necessary for spatial light modulation applications, for a very wide range of incidence angles and any wavelength in the visible. First, it needs to be calibrated through a reverse-engineering approach. In this calibration, the values obtained for two of the three parameters provide the correct values for important internal properties of these devices related with the birefringence, cell gap and director profile. Therefore, the proposed model can be used as a means to inspect internal physical properties of the cell. Last but not least the model is useful to simulate the retardance for novel PA-LC devices as a function of the LC compound and cell gap. Therefore, it is not only a reverse-engineering model but it also constitutes an analytical alternative to the usual numerical approaches for PA-LC devices design and construction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Generation of diffractive optical elements onto photopolymer using liquid crystal on silicon displays

  • Fernandez, Roberto
  • Gallego, Sergi
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In recent years, the optical storage and optical information processing technologies based on holographic and photonic techniques are suffering a huge improvement. On the other hand, Spatial Light Modulators (SLMs) based on LCoS microdisplays (PA-LCoS) open new possibilities to modulate the wavefront of a light beam. PA-LCoS are high resolution reflective devices which make possible the generation of Diffractive Optical Elements (DOE) with many important applications in photonics, communications of optical information processing, whenever it exists the possibility to have a recording material with the optimum characteristics for each application. Recently it is being explored the incorporation of photopolymers, initially used for holographic recording and data storage applications, to fabricate DOEs. Working with a setup based on a LCoS display as a master, we can store complex DOE, such as blazed gratings or diffractive lenses onto the photopolymers. We used a coverplating and index matching system on the material to avoid the influence of the thickness variation on the transmitted light.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Metrology experiments to understand wave phase and diffractive concepts

  • Fernandez, Roberto
  • Martínez Guardiola, Francisco Javier
  • Ortuño, Manuel
  • Neipp, Cristian
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The concept of phase, introduced on the study of the Diffractive Optical Elements (DOEs), presents slight understanding difficulties by the students. The phase DOEs are obtained by variations of the thickness or the refractive index of the recording medium, as opposition to the amplitude DOEs, which are obtained by the modulation of the absorption of the recording medium. It is presented some experiences to introduce the phase concept by means of thickness and refractive index variation, using photopolymers as the phase recording media. The photopolymers are non-expensive material, easy to fabricate and they present good optical quality. As photopolymers are a phase recording material, when they are illuminated with light of the wavelength at which they are sensitive, the refractive index and/or the thickness of the illuminated areas change. The experiments consist in a zero-spatial frequency limit analysis, based on a reflection and transmission interferometer, and the recording of low spatial frequency DOEs. With the first experiments, it is possible to observe the phase shift between the exposed and non-exposed areas. This phase shift, observable by a CCD camera in the form of moving fringes, permits the measurement of the thickness and refractive index variations of the material. The second experiment consists in the recording of different types of DOEs, such as sinusoidal gratings, binary gratings or blazed gratings, generated using a Spatial Light modulator (SLM) to modulate the recording beam. This experiment, apart from the study of the changes produced by the variations of the thickness and the refractive index, is very useful to analyse and compare the diffraction efficiencies (DEs) of different types of grating. The experiences proposed are suitable for the students of different subjects such as "Optical fundamental for Engineering", basic subject included in the second course for obtaining a Telecommunication Degree, for "Photonics and Optoelectronic devices" mandatory subject taught during the second year of Telecommunication master or the optative subject “Acquisition and Optical Treatment of Images” from the Master in robotics-automatic all taught at the University of Alicante. In all cases, the experiences are not only very useful to introduce the concepts to study, but also are useful also to introduce the students into the work of a research laboratory and some of the equipment and procedures that are used on it.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Caracterización de lentes holográficas registradas en un fotopolímero compatible medioambientalmente

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo evaluamos la calidad de lentes holográficas de volumen almacenadas en un fotopolímero respetuoso con el medio ambiente llamado Biophotopol. Las lentes holográficas (HL) se han obtenido en configuraciones experimentales simétricas y asimétricas con distancia focal negativa. La calidad de estas lentes se ha evaluado calculando la función de transferencia de modulación (MTF) para dos longitudes de onda (473 y 633 nm). Las HL que han demostrado una mejor calidad de imagen son las registradas asimétricamente y evaluadas a 473 nm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multipurpose semi-physical model for parallel aligned liquid crystal devices

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Efficient and stable holographic gratings stored in an environmentally friendly photopolymer

  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic gratings stored in one of the greenest photopolymers, called Biophotopol and patented by Holography and Optical Processing group at the University of Alicante, have been analyzed to achieve stable over time and efficient holograms. A curing process usually produces a diffraction efficiency (DE) decrement. However, when a curing process is not performed, the holographic gratings are not stable and DE will decrease over time due to the diffusion of molecular components inside the photopolymer. In this work, a DE increment has been demonstrated after a curing stage (performed with an incoherent and lowcost LED lamp). A detailed curing protocol to stabilize the holograms while maintaining high DE, has been carried out in unslanted transmission gratings of 1205 l/mm. The holographic transmission reflection setup allows the possibility to evaluate the transmitted and diffracted intensity beam relation, in real time, by using a He-Ne laser (633 nm), while the gratings were recording with an Argon laser (488 nm). It has been demonstrated more than a 30% DE increment after a curing process when a maximum DE in the recording stage had not been still achieved. However, in the singular case that a maximum DE in the recording stage has been already obtained, a curing stage process could produce overmodulation effects, and therefore, a DE decrement. In conclusion, a maximum DE is obtained in curing and stable hologram gratings (recording them with proper radiant exposures) over an environmentally compatible photopolymer.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Simplified physical modeling of parallel-aligned liquid crystal devices at highly non-linear tilt angle profiles

  • Francés, Jorge
  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Bleda, Sergio
  • Gallego, Sergi
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In recent works, we demonstrated the accuracy and physical relevance of a highly simplified reverse-engineering analytical model for a parallel-aligned liquid crystal on silicon devices (PA-LCoS). Both experimental measurements and computational simulations applying the rigorous split-field finite difference time domain (SF-FDTD) technique led to this conclusion in the low applied voltages range. In this paper, we develop a complete rigorous validation covering the full range of possible applied voltages, including highly non-linear liquid crystal (LC) tilt angle profiles. We demonstrate the applicability of the model for spectral and angular retardation calculations, of interest in spatial light modulation applications. We also show that our analytical model enables the calculation of the retardance for novel PA-LC devices as a function of the LC compound and cell gap, becoming an appealing alternative to the usual numerical approaches for PA-LC devices design.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Complex diffractive optical elements stored in photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers have been used mainly for holographic recording applications. Nowadays, the improvements made in diffusion models, simulating phase image stored in these materials, enable a wide range of complex diffractive optical elements (DOEs) to be fabricated. Concurrently, the miniaturization of spatial light modulators makes it possible to generate both symmetric and non-symmetric DOEs. We show the procedure to record different complex diffractive elements, and we study the viability to fabricate them based on photopolymers. In particular we evaluate the recording of achromatic lenses, axicons and fork gratings interesting to obtain optical vortices. To achieve this goal, we use a three-dimensional diffusion model, previously experimentally validated with the recording of diffractive lenses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multiplexed holograms recorded in a low toxicity Biophotopol photopolymer

  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Gallego, Sergi
  • Fernandez, Roberto
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Multiplexed diffraction gratings were recorded in 300 μm thick layers of Biophotopol photopolymer by using peristrophic multiplexing schema. Thirteen sinusoidal phase gratings were stored in a low toxicity recording medium. The diffraction efficiency conservation of the multiplexed diffraction efficiency obtained was studied along the time.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Holographic Data Storage Using Parallel-Aligned Liquid Crystal on Silicon Displays

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Fernandez, Roberto
  • Francés, Jorge
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplay has become a widely used device for the photonics community. It is a very versatile tool that can perform several tasks which transforms it into a key element in many different photonics applications. Since our group is interested in holography, in this chapter, we want to use these displays as the data entry point for a holographic data storage system (HDSS). Due to the novelty of this kind of device, we have done an intense work characterizing it. These efforts are reflected in this chapter where the reader will find two different characterization methods that will enable to predict the performance of the device in a specific application. Additionally, we present how a phase-only device can be used as a data pager using different modulation schemes and combined with a photopolymer as the holographic recording material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diffractive and Interferometric Characterization of Nanostructured Photopolymer for Sharp Diffractive Optical Elements Recording

  • Fernandez, Roberto
  • Gallego, Sergi
  • Tomita, Yasuo
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We study the behavior of a nanoparticle-polymer composite (NPC) material, based on a thiol-ene monomer system, working with long grating spacing. Thus, we evaluate the suitability of the NPC for storing complex diffractive optical elements with sharp profiles, such as blazed gratings. Using holographic methods, we measure the “apparent” diffusion of the material and the influence of the spatial period on this diffusion. The applicability of this material in complex diffractive optical elements (DOEs) recording is analyzed using an interferometric method. Supported by the results of this analysis, we record blazed gratings with different grating spacing and measure the maximum diffraction efficiency (DE) achieved. The results show that NPC has a good behavior in this range of spatial frequencies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Anamorphic and Local Characterization of a Holographic Data Storage System with a Liquid-Crystal on Silicon Microdisplay as Data Pager

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Bleda, Sergio
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this paper, we present a method to characterize a complete optical Holographic Data Storage System (HDSS), where we identify the elements that limit the capacity to register and restore the information introduced by means of a Liquid Cristal on Silicon (LCoS) microdisplay as the data pager. In the literature, it has been shown that LCoS exhibits an anamorphic and frequency dependent effect when periodic optical elements are addressed to LCoS microdisplays in diffractive optics applications. We tested whether this effect is still relevant in the application to HDSS, where non-periodic binary elements are applied, as it is the case in binary data pages codified by Binary Intensity Modulation (BIM). To test the limits in storage data density and in spatial bandwidth of the HDSS, we used anamorphic patterns with different resolutions. We analyzed the performance of the microdisplay in situ using figures of merit adapted to HDSS. A local characterization across the aperture of the system was also demonstrated with our proposed methodology, which results in an estimation of the illumination uniformity and the contrast generated by the LCoS. We show the extent of the increase in the Bit Error Rate (BER) when introducing a photopolymer as the recording material, thus all the important elements in a HDSS are considered in the characterization methodology demonstrated in this paper.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Wave-couplers for see-through applications on photopolymers

  • Gallego, Sergi
  • Neipp, Cristian
  • Bleda, Sergio
  • Fernandez, Roberto
  • Márquez, Andrés
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, wearable eyeglasses and waveguides are one of the most promising applications in photonics for the holographic recording materials. Holographic techniques structures together with the optimized recording materials permit the fabrication of the high resolution structures. In the applications of see-through glasses, the light signal can be generated on the back of the human head and guided along the temples of the glass to the frontal lenses and redirected to the eye. Therefore, we need two wave-couplers, W-C, one to trap the light inside the temples, and second in the lenses one to redirect the guide light into the eye. The holography gives us a possibility when we store the holographic optical element, HOE, with a determinate wavelength and we use the display with a longer one. Our proposal is fabricating this wave-couplers for normal light incidence using photopolymers, as recording material, because we can self-fabricate them and modify their composition and optical properties. We fabricate the HOE using a 532 nm laser to guide the 632 nm light. Furthermore, in this work we present the results obtained with different family of photopolymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Efficient and stable holographic gratings stored in an environmentally friendly photopolymer

  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic gratings stored in low-toxicity photopolymer, Biophotopol, have been analyzed to achieve stable and efficient holograms. A curing process allows the hologram stabilization, but at the same time, it could produce a diffraction efficiency (DE) reduction. Here, a detailed low-cost LED curing protocol is shown to stabilize over time 1205 l/mm transmission holograms, and at the same time, a 33% DE increment (with respect non-curing holograms) have been demonstrated. Finally, to obtain a better understanding of DE change, a theoretical fit of our experimental result, based on Kogelnik’s coupled wave theory was carried out and discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multiplexado angular en almacenamiento holográfico de información sobre fotopolímero, Angular multiplexing in holographic data storage using photopolymers

  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Gallego, Sergi
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo queremos presentar una primera evaluación de los resultados obtenidos al usar el multiplexado angular en nuestro sistema de almacenamiento holográfico de información. Nuestro sistema presenta varias innovaciones que nos ayudarán a aumentar la densidad de datos almacenados en el material, una de ellas es el multiplexado angular. Para hacer uso de este multiplexado hay que tener en cuenta ciertas consideraciones que hacen referencia a la energía depositada en el material en cada página de datos, no sólo se busca no saturar el material en las sucesivas grabaciones, sino también es deseable que estas páginas tengan la misma visibilidad cuando sean reconstruidas. El ajuste de estos factores puede realizarse experimentalmente.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modeling Diffractive Lenses Recording in Environmentally Friendly Photopolymer

  • Fernandez, Roberto
  • Navarro-Fuster, Víctor
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The improvements made in diffusion models simulating phase image recording in photopolymers enable the optimization of a wide range of complex diffractive optical elements (DOEs), while the miniaturization of spatial light modulators makes it possible to generate both symmetric and non-symmetric DOEs. In addition, there is increasing interest in the design of new friendly recording materials. In this respect, photopolymers are a promising material due to their optical properties. In this paper, we show a procedure to record diffractive spherical lenses using a nontoxic optimized photopolymer. To achieve this goal, we followed three steps: first, the chemical optimization for DOE recording; second, the recording material characterization to be simulated by a three-dimensional diffusion model; and third, the evaluation of the coverplating for the conservation of the DOE.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Numerical Analysis of H-PDLC Using the Split-Field Finite-Difference Time-Domain Method

  • Bleda, Sergio
  • Francés, Jorge
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, an accurate numerical modeling of the diffraction properties of transmission holographic polymer dispersed liquid crystal (H-PDLC) gratings is presented. The method considers ellipsoid geometry-based liquid crystal (LC) droplets with random properties regarding size and location across the H-PLDC layer and also the non-homogeneous orientation of the LC director within the droplet. The direction of the LC director inside the droplets can be varied to reproduce the effects of the external voltage applied in H-PDLC-based gratings. From the LC director distribution in the droplet, the permittivity tensor is defined, which establishes the optical anisotropy of the media, and it is used for numerically solving the light propagation through the system. In this work, the split-field finite-difference time-domain method (SF-FDTD) is applied. This method is suited for accurately analyzing periodic media, and it considers spatial and time discretisation of Maxwell’s equations. The scheme proposed here is used to investigate the influence on the diffraction properties of H-PDLC as a function of the droplets size and the bulk fraction of LC dispersed material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Influence of 4,4’-azobis (4-cyanopentanoic acid) in Transmission and Reflection Gratings Stored in a PVA/AA Photopolymer

  • Fernandez-Varo, Helena
  • Fuentes Rosillo, Rosa
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez-Varo, Helena|||/items/3d7c6657-f6f2-484d-9642-a695151a4f72
  • Fuentes Rosillo, Rosa|||/items/a0c86f80-c103-4701-b066-421ea008e33c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holographic transmission gratings with a spatial frequency of 2658 lines/mm and reflection gratings with a spatial frequency of 4553 lines/mm were stored in a polyvinyl alcohol (PVA)/acrylamide (AA) based photopolymer. This material can reach diffraction efficiencies close to 100% for spatial frequencies about 1000 lines/mm. However, for higher spatial frequencies, the diffraction efficiency decreases considerably as the spatial frequency increases. To enhance the material response at high spatial frequencies, a chain transfer agent, the 4,4’-azobis (4-cyanopentanoic acid), ACPA, is added to the composition of the material. Different concentrations of ACPA are incorporated into the main composition of the photopolymer to find the concentration value that provides the highest diffraction efficiency. Moreover, the refractive index modulation and the optical thickness of the transmission and reflection gratings were obtained, evaluated and compared to procure more information about the influence of the ACPA on them.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Optimization of Photopolymer Materials for the Fabrication of a Holographic Waveguide

  • Neipp, Cristian
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Alvarez, Mariela L.
  • Bleda, Sergio
  • Ortuño, Manuel
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
In this work, we present a method of manufacturing an optical see-through display based on a holographic waveguide with transmission holograms that couple the incident light between air and the glass substrate, accomplishing total internal reflection. The holograms (slanted transmission gratings with a spatial frequency of 1700 lines/mm) were recorded on a polyvinyl alcohol acrylamide (PVA/AA) photopolymer. We will also show that the addition of N,N′-methylene-bis-acrylamide (BMA) to the composition of the photopolymer allows the achievement of the index modulations necessary to obtain high diffraction efficiencies in non-slanted diffraction gratings of 1000 and 2200 lines/mm, and also in slanted gratings of 1700 lines/mm (which are the base of the optical system proposed).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

SF-FDTD analysis of a predictive physical model for parallel aligned liquid crystal devices

  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Recently we demonstrated a novel and simplified model enabling to calculate the voltage dependent retardance provided by parallel aligned liquid crystal devices (PA-LCoS) for a very wide range of incidence angles and any wavelength in the visible. To our knowledge it represents the most simplified approach still showing predictive capability. Deeper insight into the physics behind the simplified model is necessary to understand if the parameters in the model are physically meaningful. Since the PA-LCoS is a black-box where we do not have information about the physical parameters of the device, we cannot perform this kind of analysis using the experimental retardance measurements. In this work we develop realistic simulations for the non-linear tilt of the liquid crystal director across the thickness of the liquid crystal layer in the PA devices. We consider these profiles to have a sine-like shape, which is a good approximation for typical ranges of applied voltage in commercial PA-LCoS microdisplays. For these simulations we develop a rigorous method based on the split-field finite difference time domain (SF-FDTD) technique which provides realistic retardance values. These values are used as the experimental measurements to which the simplified model is fitted. From this analysis we learn that the simplified model is very robust, providing unambiguous solutions when fitting its parameters. We also learn that two of the parameters in the model are physically meaningful, proving a useful reverse-engineering approach, with predictive capability, to probe into internal characteristics of the PA-LCoS device.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Roadmap on holography

  • Sheridan, John T.
  • Kostuk, Raymond K.
  • Fimia Gil, Antonio
  • Wang, Yongtian
  • Lu, Wengao
  • Zhong, Haizheng
  • Tomita, Yasuo
  • Neipp, Cristian
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Marinova, Vera
  • Lin, Shiuan Huei
  • Hsu, Ken Yuh
  • Bruder, Friedrich
  • Hansen, Sven
  • Manecke, Christel
  • Meisenheimer, Richard
  • Rewitz, Christian
  • Rölle, Thomas
  • Odinokov, Sergey
  • Matoba, Osamu
  • Kumar, Manoj
  • Quan, Xiangyu
  • Awatsuji, Yasuhiro
  • Wachulak, Przemysław W.
  • Gorelaya, Alina V.
  • Sevryugin, Alexander A.
  • Shalymov, Egor V.
  • Yu Venediktov, Vladimir
  • Chmelik, Radim
  • Ferrara, Maria Antonietta
  • Coppola, Giuseppe
  • Márquez, Andrés
  • Beléndez, Augusto
  • Yang, Weijian
  • Yuste, Rafael
  • Bianco, Andrea
  • Zanutta, Alessio
  • Falldorf, Claas
  • Healy, John J.
  • Fan, Xin
  • Hennelly, Bryan M.
  • Zhurminsky, Igor
  • Schnieper, Marc
  • Ferrini, Rolando
  • Fricke, Sören
  • Situ, Guohai
  • Wang, Hao
  • Abdurashitov, Arkady S.
  • Tuchin, Valery V.
  • Petrov, Nikolay V.
  • Nomura, Takanori
  • Morim, Derek R.
  • Saravanamuttu, Kalaichelvi
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
From its inception holography has proven an extremely productive and attractive area of research. While specific technical applications give rise to 'hot topics', and three-dimensional (3D) visualisation comes in and out of fashion, the core principals involved continue to lead to exciting innovations in a wide range of areas. We humbly submit that it is impossible, in any journal document of this type, to fully reflect current and potential activity; however, our valiant contributors have produced a series of documents that go no small way to neatly capture progress across a wide range of core activities. As editors we have attempted to spread our net wide in order to illustrate the breadth of international activity. In relation to this we believe we have been at least partially successful.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Comparativa entre un modelo simplificado para pantallas PA-LCoS y evaluación rigurosa aplicando SF-FDTD

  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Recientemente propusimos un modelo simplificado que permite predecir con una incertidumbre inferior al 5% el retardo que producen las pantallas de cristal líquido sobre silicio (PALCoS) a lo largo del espectro visible y para cualquier ángulo de incidencia entre 0º y 45º. Aquí mostramos que el modelo también nos permite calcular propiedades fundamentales de la capa de cristal líquido, tales como el ángulo de inclinación en función del voltaje aplicado y la birrefringencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Polarimetric and diffractive evaluation of 3.74 micron pixel-size LCoS in the telecommunications C-band

  • Wang, Mi
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Ye, Yabin
  • Zong, Liangjia
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Liquid-crystal on Silicon (LCoS) microdisplays are one of the competing technologies to implement wavelength selective switches (WSS) for optical telecommunications. Last generation LCoS, with more than 4 megapixels, have decreased pixel size to values smaller than 4 microns, what increases interpixel cross-talk effects such as fringing-field. We proceed with an experimental evaluation of a 3.74 micron pixel size parallel-aligned LCoS (PA-LCoS) device. At 1550 nm, for the first time we use time-average Stokes polarimetry to measure the retardance and its flicker magnitude as a function of voltage. We also verify the effect of the antireflection coating when we try to characterize the PA-LCoS out of the designed interval for the AR coating. Some preliminary results for the performance for binary gratings are also given, where the decrease of modulation range with the increase in spatial frequency is shown, together with some residual polarization effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Autoaprendizaje guiado por medio de una Wiki

  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Fernández de Ávila, Susana
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
La web 2.0, o web colaborativa, lleva años implantada con gran éxito, ofreciendo grandes posibilidades en el mundo de la educación. En este trabajo describiremos la experiencia obtenida en el desarrollo de una wiki para el aprendizaje de una asignatura del Grado de Ingeniería en Telecomunicaciones. Esta experiencia puede ser extensible a casi cualquier tipo de asignatura, dada la flexibilidad que nos ofrece la wiki.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

PVA/AA photopolymers and PA-LCoS devices combined for holographic data storage

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We introduce a polyvinil alcohol/acrylamide (PVA/AA) photopolymer compound in a holographic memory testing platform to provide experimental results for storage and retrieval of information. We also investigate different codification schemes for the data pages addressed onto the parallel-addressed liquid crystal on silicon (PA-LCoS) device, used as the data pager, such as binary intensity modulation (BIM), and hybrid-ternary modulation (HTM), and we will see that an actual approximation for HTM can be obtained with a PA-LCoS device. We will also evaluate the effect of the time fluctuations in the PA-LCoS microdisplays onto the BIM and HTM regimes. Good results in terms of signal-tonoise ratio and bit-error ratio are provided with the experimental system and using the PVA/AA photopolymer produced in our lab, thus showing its potential and interest for future research focused on this material with highly tunable properties. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Parámetros que modifican la intensidad de corriente eléctrica en materiales compuestos H-PDLC

  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diffractive optical elements recorded in different photopolymers

  • Fernandez, Roberto
  • Navarro-Fuster, Víctor
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Francés, Jorge
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We have fabricated and characterized diffractive phase optical elements (DOEs) such as diffractive lenses or blazed gratings in three different photopolymers using a liquid crystal on silicon (LCoS) spatial light modulator as a master.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analysis of volume holograms using the technique of Green's tensor

  • Neipp, Cristian
  • Francés, Jorge
  • Gallego, Sergi
  • Bleda, Sergio
  • Alvarez, Mariela L.
  • Navarro-Fuster, Víctor
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The holographic storage of information is based on the interference of two waves: the reference wave and the object wave, the latter is generated by using a spatial light modulator, and in the case of applications of data storage this corresponds to a binary pattern of one and zeros. The interference pattern is recorded in a photosensitive medium (photopolymers, photographic emulsions, photorefractive, etc.), so that when illuminated by the reference wave the object wave is reproduced. In order to properly investigate the characteristics of the generated hologram it is necessary to adequately study the interaction of electromagnetic radiation with the recording medium. In this work we develop a completely vectorial formalism for solving the Helmholtz equation that allows investigation of electromagnetic dispersion in dielectric media in which the refractive index varies spatially. The method is based on the technique of Green's tensor and allows to correctly simulate the behavior of a volume hologram. This method is compared with the method of discrete dipoles and a formalism based on the first Born approximation to determine the intensity of light scattered by a volume hologram.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Predictive management of polarized light in liquid crystal devices based on average and flicker molecular tilt

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We incorporate the prediction of flicker to a semiphysical and analytical model describing the angular and wavelength dependencies of retardance in parallel aligned liquid crystal (PA-LC) devices. This makes the model unique due to the wide range of calculation it offers while keeping its simplicity. Prediction of the modulation of retardance and its associated flicker relies on the fitting of the equivalent tilt angle of the molecules as a function of applied voltage. Specific results are given for liquid crystal on silicon (PA-LCoS) microdisplays, central to many spatial light modulation applications such as the generation of structured polarized beams. Experimental characterization results at arbitrary angles and wavelengths prove the predictive capability of the model. To highlight the richness of situations with PA-LCoS devices, we provide results for two different digital addressing sequences producing different levels of flicker. We focus on the application of the PA-LCoS as a polarization state generator (PSG) and we emphasize the ability of our approach to evaluate the performance across the visible spectrum and for a wide range of incidence angles. Our approach offers novel capabilities in the generation of arbitrary states of polarization, both fully and partially polarized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modeling parallel aligned liquid crystal devices

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The Parallel Aligned Liquid Crystal microdisplays (PA-LC) has become a widely used device for optics and photonics applications. In this work we propose a PA-LC model that allows us to predict the device performance in a wide range of incidence angles and for any wavelength in the visible. From a reduced amount of measurements we apply a reverse engineering process that reveals some important parameters related with the manufacturing of the device. This knowledge eases the design of our photonic application or experiment, and it serves us to analyze the physics and dynamics of PA-LC cells since we can infer the LC molecules tilt angle as a function of applied voltage.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Measurement of the refractive index profile of an optical fiber by Fresnel diffraction

  • Bleda, Sergio
  • Neipp, Cristian
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Francés, Jorge
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
In this work we present a non-destructive technique based on Fresnel diffraction to obtain the refractive index profile of a fiber grating. The system has been firstly calibrated by using the experimental data of the diffraction pattern of rectangular slits at different distances.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Application of PA-LCoS Modulators in Multilevel Phase Elements and in Holographic Data Storage

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Fernandez, Roberto
  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Neipp, Cristian
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Additives Type Schiff’s Base as Modifiers of the Optical Response in Holographic Polymer-Dispersed Liquid Crystals

  • Fenoll Gambín, Sandra
  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Serrano, Jose Luis
  • Márquez, Andrés
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Schiff’s bases with specific π-electron system have been synthesized and used as additives in holographic polymer-dispersed liquid crystals. It was observed that these substances modify different parameters such as current intensity, voltage, and diffracted light intensity. In addition, the maximum diffraction efficiency obtained in the reconstruction of the holograms is related to the additive molecule. We propose a relationship between this behavior and the molecular structure of these substances.