Skip to main content

PROCESOS NANO-ESTRUCTURALES EN METALES Y ALEACIONES ASOCIADOS A LA DEFORMACION PLASTICA Y/O IRRADIACION

FIS2015-69017-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Review of non-classical features of deformation twinning in hcp metals and their description by disconnection mechanisms

  • Ostapovets, Andriy
  • Serra Tort, Ana María|||0000-0002-8754-5649
The study of deformation twinning has long history. However new, sometimes surprising, findings have shown that the phenomenon of deformation twinning still is not completely understood. The study of deformation twinning has long history. However new, sometimes surprising, findings have shown that the phenomenon of deformation twinning still is not completely understood. During recent years, some debates are taking place in the scientific literature concerning deformation twinning mechanisms in metals with hcp structure. These debates deal with the importance of special twin boundary dislocations named disconnections, growth and nucleation of twins, non-Schmid behavior of twinning, difference of deformation produced by twins from simple shear. They invoked new propositions for atomistic mechanisms of deformation twinning. The purpose of this review is to compare the classical theories of interfacial defects with the new findings and prove that many of these findings can be understood in terms of these well-established theories. The main attention is paid to summarizing the explanations of different phenomena in terms of disconnection mechanisms in order to show that there is no contradiction between these mechanisms and the new findings., This research was funded by Spanish MINECO, FIS2015-69017-P, Czech Science Foundation, grant number 18-07140S, Ministry of Education, Youth And Sports of The Czech Republic, grant number CEITEC 2020 (LQ1601)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Interaction of a dislocation pileup with {332} tilt grain boundary in bcc metals studied by MD simulations

  • Kvashin, Nikolai|||0000-0002-6924-0083
  • Anento Moreno, Napoleón|||0000-0002-4643-7270
  • Terentyev, Dimitry
  • Bakaev, A.
  • Serra Tort, Ana María|||0000-0002-8754-5649
The sustainability and capacity of macroscopic deformation by polycrystalline metals and metallic alloys is controlled by the propagation of dislocation-mediated slip through grains. In this paper, the interaction of a pileup of 1/2¿111¿ dislocations with the {332} tilt grain boundary (GB) is studied as a function of temperature in three bcc metals: iron (Fe), chromium (Cr), and tungsten (W). The interaction results in the transformation of the crystal dislocation into GB dislocations. The {332} tilt GB absorbs the crystal dislocations of the pileup, neither the transmission nor reflection of dislocations was observed. The reaction product at the GB is determined by the crystallography of the GB and the features of the crystal dislocations involved, specifically, the orientation of the Burgers vector and the glide plane of the dislocation. In general, the decomposition results in the formation of a sessile GB dislocation with a riser that facets the GB and several elementary disconnections that glide away. In some cases, the riser increases its length with the number of dislocations absorbed and a new asymmetrical grain boundary of {112}/{110} type is created. For a given external shear stress, the number of dislocations absorbed depends on the orientation of the Burgers vector, glide plane of the pileup, and material., This work was supported by the Euratom research and training program 2014–2018 under Grant agreement No 755039 (Project M4F) and by the Spanish Ministry of Science and Innovation: FIS2015-69017-P. This work also contributes to the Joint Program on Nuclear Materials of the European Energy Research Alliance (JPNM-EERA). This work is partially sponsored by a Belgium FOD fusion grant., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Interaction of a mobile {1 1 2} grain boundary with radiation induced defects in a-Fe: Transformation of defects and impact on the shear-coupled grain boundary migration

  • Anento Moreno, Napoleón|||0000-0002-4643-7270
  • Serra Tort, Ana María|||0000-0002-8754-5649
Mobile grain boundaries (GB) may have specific interactions with radiation-induced defects compared with static GBs. In this paper, we consider the GB-defect interactions for the {1 1 2} GB that performs shear coupled grain boundary migration mediated by its glissile disconnections. The conservative motion of this GB facilitates the interaction with radiation-induced defects both, mobile and sessile. While mobile defects interact by diffusing to GBs, sessile defects are approached by moving GBs. Clusters at the GB may either be dragged by disconnections or transformed by the motion of the GB that relocates them into the adjacent grain. In turn, the interaction with point defects and their clusters increases the resolved shear stress necessary for the motion of disconnections and subsequent GB migration. The results obtained are directly applicable to the interaction of radiation induced defects with {1 1 2} deformation twins., This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 661913 (SOTERIA). This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA). The research has been partially supported by the Spanish MINECO (FIS2015-69017-P)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

On the common topological conditions for shear-coupled twin boundary migration in bcc and hcp metals

  • Serra Tort, Ana María|||0000-0002-8754-5649
  • Kvashin, Nikolai|||0000-0002-6924-0083
  • Anento Moreno, Napoleón|||0000-0002-4643-7270
The most abundant deformation twins in metals with hcp and bcc crystallographic structures, i. e. (10-12) and (112) respectively, proceed with the same mechanism of deformation under an applied shear stress, i. e. shear-coupled twin boundary migration. Despite the differences in the atomic structure and degrees of symmetry of bcc and hcp crystals, the topological aspects that rule the processes of growth and shrinkage of these deformation twins are equivalent. In this paper, we revisit the atomic level processes, occurring at the interfaces, through which both coherent twin boundaries displace in a conservative manner and accommodate deformation. These processes include the creation of a twin boundary dislocation that acts as a source of disconnections, namely, line defects at the interface that have both dislocation and step character. The glide of disconnections along the twin boundary is responsible for the displacement of the interface, implying the growth or shrink of the twin. We describe the interaction of these twins with crystal dislocations and show that the product of the interaction is a source of disconnections. We show that these interactions can be described in terms of the structure of the interfaces and the Burgers vector of dislocations. The study is based on the topological theory of interfacial defects and we show the usefulness of the dichromatic pattern associated to each interface in the prediction and analysis of the interactions, This work was supported by the Euratom research and training programme 2014 – 2018 under grant agreements: No 661913 (SOTERIA) and No 755039 (Project M4F). This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA). The research was partially supported by the Spanish MINECO (FIS2015-69017‑P)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

On the migration of {3 3 2} <1 1 0> tilt grain boundary in bcc metals and further nucleation of {1 1 2} twin

  • Kvashin, Nikolai|||0000-0002-6924-0083
  • Ostapovets, Andriy
  • Anento Moreno, Napoleón|||0000-0002-4643-7270
  • Serra Tort, Ana María|||0000-0002-8754-5649
{3 3 2} <1 1 0> tilt grain boundaries (GB) move conservatively under a shear stress by the creation and glide of disconnections. When crystal dislocations interact with the GB they are absorbed and transformed into GB dislocations (GBD). The behaviour of GBDs under shear stress depends on the orientation of the Burgers vector and sense of shear stress. There are two possible scenarios: a) the GBD moves together with the GB in a compensated climb, then plastic deformation is accommodated by shear-coupled GB migration; b) the GBD is sessile because it cannot undergo a compensated climb when interacting with the disconnections. If so, the sessile GBD is the nucleus of a {1 1 2} twin. The nucleation of the twin is produced by the pileup of disconnections at both sides of the GBD. Then, plastic deformation is accommodated by the combination of the motion of the {3 3 2} GB and the growth of {1 1 2} twins inside the grain., This work was supported by the Euratom research and training programme 2014-2018 under grant agreement No 755039 (Project M4F), by the Spanish MINECO: FIS2015-69017-P. This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Atomic processes of shear-coupled migration in {112} twins and vicinal grain boundaries in bcc-Fe

  • Kvashin, Nikolai|||0000-0002-6924-0083
  • García-Müller, Pablo Luis
  • Anento Moreno, Napoleón|||0000-0002-4643-7270
  • Serra Tort, Ana María|||0000-0002-8754-5649
© 2020 American Physical Society, Tilt {112} grain boundaries (GBs) in bcc metals perform shear-coupled grain-boundary migration by the creation and glide of disconnections. Disconnection dipoles may be created at the pristine GB at high stresses or may be generated at the core of a GB dislocation that acts as a source of disconnections. We characterize this source in terms of its Burgers vector, denoted →b1/−1, and describe the mechanism that allows the source to move conservatively with the GB. The →b1/−1 grain-boundary dislocation is created, for instance, during the absorption of a crystal dislocation by the {112} grain boundary. In addition, →b1/−1 accommodates {112} vicinal grain boundaries that are formed by segments of {112} planes separated by →b1/−1 grain-boundary dislocations. The presence of these →b1/−1 dislocations facilitates the conservative displacement of both the pristine and the vicinal GBs. We show that the creation of disconnections is the key for the absorption of edge and screw dislocations by the GB and the drag of mixed dislocations by the GB during its migration. These conservative processes are efficient ways to accommodate plastic deformation by the growth and shrink of {112} twins, and shear-coupled motion of the {112} GB and its vicinal GBs., This work was supported by the Euratom research and training programme 2014–2018 under Grant Agreement No. 755039 (Project M4F), by the Spanish MINECO: Grants No. FIS2015-69017-P and No. RTI2018-096006-B-I00, the latter with ERDF funds. This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA). Simulations partially carried out in the computing facilities provided by the CYTED Network RICAP (517RT0529)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Non-diffusional growth mechanism of I1 basal stacking-faults inside twins in hcp metals

  • Ostapovets, Andriy
  • Serra Tort, Ana María|||0000-0002-8754-5649
  • Pond, Robert C.
Deformation twins in magnesium exhibit considerable densities of I1 basal-plane stacking-faults. Since these faults generally transect their host twin, they presumably lengthen concommitantly with boundary migration during twin growth. We investigate this process using atomic-scale simulation for {1012} and {1011} twinning. It is demonstrated first that the intersection of a stacking-fault with a stationary twin boundary is delineated by a sessile imperfect disconnection. Subsequently, by applying a shear strain, we stimulate twin growth by the passage of twinning disconnections along twin boundaries, and show that these are able to propagate through such pre-existing imperfect disconnections in a conservative manner., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the migration of {3 3 2} <1 1 0> tilt grain boundary in bcc metals and further nucleation of {1 1 2} twin

  • Kvashin, Nikolai
  • Ostapovets, Andriy
  • Anento Moreno, Napoleón
  • Serra Tort, Ana María
{3 3 2} <1 1 0> tilt grain boundaries (GB) move conservatively under a shear stress by the creation and glide of disconnections. When crystal dislocations interact with the GB they are absorbed and transformed into GB dislocations (GBD). The behaviour of GBDs under shear stress depends on the orientation of the Burgers vector and sense of shear stress. There are two possible scenarios: a) the GBD moves together with the GB in a compensated climb, then plastic deformation is accommodated by shear-coupled GB migration; b) the GBD is sessile because it cannot undergo a compensated climb when interacting with the disconnections. If so, the sessile GBD is the nucleus of a {1 1 2} twin. The nucleation of the twin is produced by the pileup of disconnections at both sides of the GBD. Then, plastic deformation is accommodated by the combination of the motion of the {3 3 2} GB and the growth of {1 1 2} twins inside the grain., This work was supported by the Euratom research and training programme 2014-2018 under grant agreement No 755039 (Project M4F), by the Spanish MINECO: FIS2015-69017-P. This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Review of non-classical features of deformation twinning in hcp metals and their description by disconnection mechanisms

  • Ostapovets, Andriy
  • Serra Tort, Ana María
The study of deformation twinning has long history. However new, sometimes surprising, findings have shown that the phenomenon of deformation twinning still is not completely understood. The study of deformation twinning has long history. However new, sometimes surprising, findings have shown that the phenomenon of deformation twinning still is not completely understood. During recent years, some debates are taking place in the scientific literature concerning deformation twinning mechanisms in metals with hcp structure. These debates deal with the importance of special twin boundary dislocations named disconnections, growth and nucleation of twins, non-Schmid behavior of twinning, difference of deformation produced by twins from simple shear. They invoked new propositions for atomistic mechanisms of deformation twinning. The purpose of this review is to compare the classical theories of interfacial defects with the new findings and prove that many of these findings can be understood in terms of these well-established theories. The main attention is paid to summarizing the explanations of different phenomena in terms of disconnection mechanisms in order to show that there is no contradiction between these mechanisms and the new findings., This research was funded by Spanish MINECO, FIS2015-69017-P, Czech Science Foundation, grant number 18-07140S, Ministry of Education, Youth And Sports of The Czech Republic, grant number CEITEC 2020 (LQ1601)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Non-diffusional growth mechanism of I1 basal stacking-faults inside twins in hcp metals

  • Ostapovets, Andriy
  • Serra Tort, Ana María
  • Pond, Robert C.
Deformation twins in magnesium exhibit considerable densities of I1 basal-plane stacking-faults. Since these faults generally transect their host twin, they presumably lengthen concommitantly with boundary migration during twin growth. We investigate this process using atomic-scale simulation for {1012} and {1011} twinning. It is demonstrated first that the intersection of a stacking-fault with a stationary twin boundary is delineated by a sessile imperfect disconnection. Subsequently, by applying a shear strain, we stimulate twin growth by the passage of twinning disconnections along twin boundaries, and show that these are able to propagate through such pre-existing imperfect disconnections in a conservative manner., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the common topological conditions for shear-coupled twin boundary migration in bcc and hcp metals

  • Serra Tort, Ana María
  • Kvashin, Nikolai
  • Anento Moreno, Napoleón
The most abundant deformation twins in metals with hcp and bcc crystallographic structures, i. e. (10-12) and (112) respectively, proceed with the same mechanism of deformation under an applied shear stress, i. e. shear-coupled twin boundary migration. Despite the differences in the atomic structure and degrees of symmetry of bcc and hcp crystals, the topological aspects that rule the processes of growth and shrinkage of these deformation twins are equivalent. In this paper, we revisit the atomic level processes, occurring at the interfaces, through which both coherent twin boundaries displace in a conservative manner and accommodate deformation. These processes include the creation of a twin boundary dislocation that acts as a source of disconnections, namely, line defects at the interface that have both dislocation and step character. The glide of disconnections along the twin boundary is responsible for the displacement of the interface, implying the growth or shrink of the twin. We describe the interaction of these twins with crystal dislocations and show that the product of the interaction is a source of disconnections. We show that these interactions can be described in terms of the structure of the interfaces and the Burgers vector of dislocations. The study is based on the topological theory of interfacial defects and we show the usefulness of the dichromatic pattern associated to each interface in the prediction and analysis of the interactions, This work was supported by the Euratom research and training programme 2014 – 2018 under grant agreements: No 661913 (SOTERIA) and No 755039 (Project M4F). This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA). The research was partially supported by the Spanish MINECO (FIS2015-69017‑P)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Atomic processes of shear-coupled migration in {112} twins and vicinal grain boundaries in bcc-Fe

  • Kvashin, Nikolai
  • García-Müller, Pablo Luis
  • Anento Moreno, Napoleón
  • Serra Tort, Ana María
© 2020 American Physical Society, Tilt {112} grain boundaries (GBs) in bcc metals perform shear-coupled grain-boundary migration by the creation and glide of disconnections. Disconnection dipoles may be created at the pristine GB at high stresses or may be generated at the core of a GB dislocation that acts as a source of disconnections. We characterize this source in terms of its Burgers vector, denoted →b1/−1, and describe the mechanism that allows the source to move conservatively with the GB. The →b1/−1 grain-boundary dislocation is created, for instance, during the absorption of a crystal dislocation by the {112} grain boundary. In addition, →b1/−1 accommodates {112} vicinal grain boundaries that are formed by segments of {112} planes separated by →b1/−1 grain-boundary dislocations. The presence of these →b1/−1 dislocations facilitates the conservative displacement of both the pristine and the vicinal GBs. We show that the creation of disconnections is the key for the absorption of edge and screw dislocations by the GB and the drag of mixed dislocations by the GB during its migration. These conservative processes are efficient ways to accommodate plastic deformation by the growth and shrink of {112} twins, and shear-coupled motion of the {112} GB and its vicinal GBs., This work was supported by the Euratom research and training programme 2014–2018 under Grant Agreement No. 755039 (Project M4F), by the Spanish MINECO: Grants No. FIS2015-69017-P and No. RTI2018-096006-B-I00, the latter with ERDF funds. This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA). Simulations partially carried out in the computing facilities provided by the CYTED Network RICAP (517RT0529)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Interaction of a dislocation pileup with {332} tilt grain boundary in bcc metals studied by MD simulations

  • Kvashin, Nikolai
  • Anento Moreno, Napoleón
  • Terentyev, Dimitry
  • Bakaev, A.
  • Serra Tort, Ana María
The sustainability and capacity of macroscopic deformation by polycrystalline metals and metallic alloys is controlled by the propagation of dislocation-mediated slip through grains. In this paper, the interaction of a pileup of 1/2¿111¿ dislocations with the {332} tilt grain boundary (GB) is studied as a function of temperature in three bcc metals: iron (Fe), chromium (Cr), and tungsten (W). The interaction results in the transformation of the crystal dislocation into GB dislocations. The {332} tilt GB absorbs the crystal dislocations of the pileup, neither the transmission nor reflection of dislocations was observed. The reaction product at the GB is determined by the crystallography of the GB and the features of the crystal dislocations involved, specifically, the orientation of the Burgers vector and the glide plane of the dislocation. In general, the decomposition results in the formation of a sessile GB dislocation with a riser that facets the GB and several elementary disconnections that glide away. In some cases, the riser increases its length with the number of dislocations absorbed and a new asymmetrical grain boundary of {112}/{110} type is created. For a given external shear stress, the number of dislocations absorbed depends on the orientation of the Burgers vector, glide plane of the pileup, and material., This work was supported by the Euratom research and training program 2014–2018 under Grant agreement No 755039 (Project M4F) and by the Spanish Ministry of Science and Innovation: FIS2015-69017-P. This work also contributes to the Joint Program on Nuclear Materials of the European Energy Research Alliance (JPNM-EERA). This work is partially sponsored by a Belgium FOD fusion grant., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Interaction of a mobile {1 1 2} grain boundary with radiation induced defects in a-Fe: Transformation of defects and impact on the shear-coupled grain boundary migration

  • Anento Moreno, Napoleón
  • Serra Tort, Ana María
Mobile grain boundaries (GB) may have specific interactions with radiation-induced defects compared with static GBs. In this paper, we consider the GB-defect interactions for the {1 1 2} GB that performs shear coupled grain boundary migration mediated by its glissile disconnections. The conservative motion of this GB facilitates the interaction with radiation-induced defects both, mobile and sessile. While mobile defects interact by diffusing to GBs, sessile defects are approached by moving GBs. Clusters at the GB may either be dragged by disconnections or transformed by the motion of the GB that relocates them into the adjacent grain. In turn, the interaction with point defects and their clusters increases the resolved shear stress necessary for the motion of disconnections and subsequent GB migration. The results obtained are directly applicable to the interaction of radiation induced defects with {1 1 2} deformation twins., This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 661913 (SOTERIA). This work also contributes to the Joint Program on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA). The research has been partially supported by the Spanish MINECO (FIS2015-69017-P)., Peer Reviewed, Postprint (author's final draft)