Skip to main content

SIMULACION OPTICA DE MATERIA OSCURA Y OTROS SISTEMAS DE FISICA FUNDAMENTAL

FIS2017-83762-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of key variables for energy efficiency in warships

  • Carrasco, Pedro
  • Bendaña, Ricardo
  • Paredes, Angel
  • Michinel, Humberto
  • Arce, M. Elena
  • Zaragoza, Sonia
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] The purpose of this work is to investigate the effect of environmental variables on the electric energy expenditure of a typical surface warship. Studies with similar objectives are much more frequent for merchant ships, but warship operations have peculiarities that will be emphasized. In particular, they spend large fractions of their life cycle at port, during which the vessel remains active. Firstly, a discussion of the embarked systems is presented, pointing out the importance of auxiliary systems and in particular, heating, ventilation and air conditioning. Quantitative estimates of the energy consumption of those systems are provided. Then, using data taken during real operations of a frigate of the Spanish navy, correlations are computed between power consumption and different environmental variables. As a novelty, the analysis is carried out separating the different modes of operation of the ship. This leads to interesting conclusions, including a considerable positive correlation between sea water temperature and consumption when the vessel is at port. The effect of a moored ship on the surrounding sea water temperature is studied by a numerical computation. The results suggest that the position of sea chests may be consequential for energy efficiency., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by Xunta de Galicia (Grant Number ED431B 2018/57) and by Ministerio de Economia y Competitividad (Grant Numbers FIS2017-83762-P, FPDI-2013-17516, ENE 2013-48015-C3-1-R and RTI2018-102256-B-I00-AR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Uso de la correlación estadística para la gestión energética en locales de oficina empleando técnicas de la industria 4.0, Use of statistical correlation for energy management in office premises adopting techniques of the Industry 4.0

  • Hernandez-Luna, Monica
  • Robledo-Fava, Roberto
  • Paredes, Angel
  • Michinel Álvarez, HJ
  • Zaragoza Fernández, S
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[ES] Presentamos un análisis estadístico de las correlaciones entre la concentración de dióxido de carbono y el consumo de energía en lugares de trabajo, con el objetivo de poder ser programadas en plataformas energéticas In cloud, para la mejora de la gestión y el aumento el grado de automatización y control en la industria del sector servicios. Se usa un sistema de bajo coste para medir y transmitir los datos de los edificios y la información puede ser análizada desde cualquier dispositivo remoto. El estudio incluye datos medidos durante un año en dos oficinas situadas en Sada (A Coruña, España) y Clayton (Panamá). Presentamos curvas de regresión lineal y no lineal, mostramos que hay correlaciones positivas significativas y discutimos aspectos estacionales y relacionados con el clima. Argumentamos que este tipo de análisis puede generar información útil para el diseño y operación en la industria de servicios, a través de plataformas energéticas de control y automatización en web., [EN] We present a statistical analysis of correlations between carbon dioxide concentration and energy consumption in workplaces, with the goal of enabling its eventual programming in energy platforms In Cloud for improving management and enhancing automation and control in the service sector industry. A low-cost system is used to measure and transmit the data of buildings and the information can be analyzed by any remote device. The study includes data measured during one year in two offices located at Sada (A Coruna, Spain) and Clayton (Panama). We present linear and nonlinear regression curves, show that there are significant positive correlations and discuss seasonal and climate-related aspects. We argue that this kind of analysis can provide useful information for the design and operation in the service industry, through web-based energy platforms for control and automation., The authors acknowledge Fridama Instalaciones, S.L. for granting access to data for the present study and the EQUS energy platform for the data management software. This work was partially supported by grants FIS2014-58117-P, ENE2015-71333-R, MAT2017-86453-R and FIS2017-83762-P from Ministerio de Economia y Competitividad (Spain) and grant GPC2015/019 from Conselleria de Cultura, Educacion e Ordenacion Universitaria (Xunta de Galicia, Spain). R. Robledo Fava and M.C. Hernandez Luna were supported by CONACYT grants no. 298503 and 296471, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the Influence Subjective Human Parameters in the Calculation of Thermal Comfort and Energy Consumption of Buildings

  • Robledo-Fava, Roberto
  • Hernández-Luna, Monica C.
  • Michinel, Humberto
  • Zaragoza, Sonia
  • Castillo-Guzman, A.
  • Selvas-Aguilar, Romeo
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] In the present work, we analyze the influence of the designer's choice of values for the human metabolic index (met) and insulation by clothing (clo) that can be selected within the ISO 7730 for the calculation of the energy demand of buildings. To this aim, we first numerically modeled, using TRNSYS, two buildings in different countries and climatologies. Then, we consistently validated our simulations by predicting indoor temperatures and comparing them with measured data. After that, the energy demand of both buildings was obtained. Subsequently, the variability of the set-point temperature concerning the choice of clo and met, within limits prescribed in ISO 7730, was analyzed using a Monte Carlo method. This variability of the interior comfort conditions has been finally used in the numerical model previously validated, to calculate the changes in the energy demand of the two buildings. Therefore, this work demonstrated that the diversity of possibilities offered by ISO 7730 for the choice of clo and met results, depending on the values chosen by the designer, in significant differences in indoor comfort conditions, leading to non-negligible changes in the calculations of energy consumption, especially in the case of big buildings., This work was partially funded by grants OHMERA MAT2017-86453-R, FIS2017-83762-P and ENE2015-71333-R from MINECO (Spain). R. Robledo and M. Hernandez were supported by CONACYT grants 298503 and 296471, respectively. We also thanks to supporting given by the project number INFRA-187906 from the Mexican National Council of Science and Technology-CONACYT.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Fast switch and spline function inversion algorithm with multistep optimization and k-vector search for solving Kepler’s equation in celestial mechanics

  • Tommasini , Daniele
  • Olivieri Cecchi, David Nicholas
Obtaining the inverse of a nonlinear monotonic function f(x) over a given interval is a common problem in pure and applied mathematics, the most famous example being Kepler’s description of orbital motion in the two-body approximation. In traditional numerical approaches, this problem is reduced to solving the nonlinear equation f(x)−y=0 in each point y of the co-domain. However, modern applications of orbital mechanics for Kepler’s equation, especially in many-body problems, require highly optimized numerical performance. Ongoing efforts continually attempt to improve such performance. Recently, we introduced a novel method for computing the inverse of a one-dimensional function, called the fast switch and spline inversion (FSSI) algorithm. It works by obtaining an accurate interpolation of the inverse function f−1(y) over an entire interval with a very small generation time. Here, we describe two significant improvements with respect to the performance of the original algorithm. First, the indices of the intervals for building the spline are obtained by k-vector search combined with bisection, thereby making the generation time even smaller. Second, in the case of Kepler’s equation, a multistep method for the optimized calculation of the breakpoints of the spline polynomial was designed and implemented in Cython. We demonstrate results that accurately solve Kepler’s equation for any value of the eccentricity e∈[0,1−ϵ], with ϵ=2.22×10−16, which is the limiting error in double precision. Even with modest current hardware, the CPU generation time for obtaining the solution with high accuracy in a large number of points of the co-domain can be kept to around a few nanoseconds per point., Ministerio de Economia, Industria y Competitividad | Ref. FIS2017-83762-P, Xunta de Galicia | Ref. ED431B 2018/57
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Two fast and accurate routines for solving the elliptic Kepler equation for all values of the eccentricity and mean anomaly

  • Tommasini , Daniele
  • Olivieri Cecchi, David Nicholas
Context. The repetitive solution of Kepler’s equation (KE) is the slowest step for several highly demanding computational tasks in astrophysics. Moreover, a recent work demonstrated that the current solvers face an accuracy limit that becomes particularly stringent for high eccentricity orbits. Aims. Here we describe two routines, ENRKE and ENP5KE, for solving KE with both high speed and optimal accuracy, circumventing the abovementioned limit by avoiding the use of derivatives for the critical values of the eccentricity e and mean anomaly M , namely e > 0.99 and M close to the periapsis within 0.0045 rad. Methods. The ENRKE routine enhances the Newton-Raphson algorithm with a conditional switch to the bisection algorithm in the critical region, an efficient stopping condition, a rational first guess, and one fourth-order iteration. The ENP5KE routine uses a class of infinite series solutions of KE to build an optimized piecewise quintic polynomial, also enhanced with a conditional switch for close bracketing and bisection in the critical region. High-performance Cython routines are provided that implement these methods, with the option of utilizing parallel execution. Results. These routines outperform other solvers for KE both in accuracy and speed. They solve KE for every e ∈ [0, 1 − ϵ ], where ϵ is the machine epsilon, and for every M , at the best accuracy that can be obtained in a given M interval. In particular, since the ENP5KE routine does not involve any transcendental function evaluation in its generation phase, besides a minimum amount in the critical region, it outperforms any other KE solver, including the ENRKE, when the solution E ( M ) is required for a large number N of values of M . Conclusions. The ENRKE routine can be recommended as a general purpose solver for KE, and the ENP5KE can be the best choice in the large N regime., Axencia Galega de Innovación, Agencia Estatal de Investigación | Ref. FIS2017-83762-P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Aprendizaje de la Teoría de la relatividad restringida de Einstein. Estado de la cuestión, Learning Einstein’s Theory of special relativity : state of the art

  • Prado Orbán, Xabier
  • Domínguez Castiñeiras, Xosé Manuel
  • Area Carracedo, Iván Carlos
  • Paredes Galán, Ángel
  • Mira Pérez, Jorge
En este artículo se analizan las dificultades de aprendizaje de la Teoría de la Relatividad Restringida de Einstein. La información se ha obtenido y seleccionado de las bases de datos Web of Science, Scopus, Educational Resources Information Center y Google Scholar, teniendo en cuenta los índices de valoración Journal Citation Reports (JCR), Scimago Journal Rank (SJR) e Índice Compuesto de Difusión Secundaria (ICDS). Para el análisis y las conclusiones se establecieron las dificultades de aprendizaje del alumnado relacionadas con la Relatividad Restringida de Einstein, respecto a los siguientes conceptos: Espacio y tiempo. Causalidad y simultaneidad. Sistemas de referencia. Energía. Masa. Luz. El presente estudio ha constituido el fundamento del diseño de una propuesta de enseñanza basada en la formulación geométrica de Minkowski, dirigida a estudiantes de bachillerato., In this article we analyze the learning difficulties of Einstein's Theory of Restricted Relativity. The information has been obtained and selected from the Web of Science, Scopus, Educational Resources Information Center and Google Scholar databases, taking into account the Journal Citation Reports (JCR), Scimago Journal Rank (SJR) and Composite Index of Secondary Dissemination (ICDS). For the analysis and the conclusions the learning difficulties of the students related to the Restricted Relativity of Einstein were established, with respect to the following concepts: Space and time. Causality and simultaneity. Reference frames. Energy. Mass. Light. This study has been the basis for the design of a teaching proposal based on the geometric formulation of Minkowski, aimed at high school students., Agencia Estatal de Investigación | Ref. PGC2018-096581-B-C22, Agencia Estatal de Investigación | Ref. EDU2017-84979-R, Xunta de Galicia | Ref. ED431B 2018/57, Agencia Estatal de Investigación | Ref. FIS2017-83762-P, Agencia Estatal de Investigación | Ref. MTM2016–75140–P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Relativistic velocity addition from the geometry of momentum space

  • Paredes Galán, Ángel
  • Prado, Xabier
  • Mira, Jorge
With the goal of developing didactic tools, we consider the geometrization of the addition of velocities in special relativity by using Minkowski diagrams in momentum space. For the case of collinear velocities, we describe three ruler-and-compass constructions that provide simple graphical solutions working with the mass-shell hyperbola in a 1 + 1-dimensional energy–momentum plane. In the spirit of dimensional scaffolding, we use those results to build a generalization in 1 + 2 dimensions for the case of non-collinear velocities, providing in particular a graphical illustration of how the velocity transverse to a boost changes while the momentum remains fixed. We supplement the discussion with a number of interactive applets that implement the diagrammatic constructions and constitute a visual tool that should be useful for students to improve their understanding of the subtleties of special relativity, Agencia Estatal de Investigación | Ref. PID2020-118613GB-I00, Agencia Estatal de Investigación | Ref. FIS2017-83762-P, Xunta de Galicia | Ref. ED431B 2018/57, Xunta de Galicia | Ref. ED431B 2021/22
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

QMBlender: Particle-based visualization of 3D quantum wave function dynamics

  • Figueiras Gómez, Edgar
  • Olivieri Cecchi, David Nicholas
  • Paredes Galán, Ángel
  • Michinel Álvarez, Humberto Javier
Simulated three-dimensional quantum wave functions (or probability density distributions, in general), Ψ(x, t), are often represented graphically as smooth isocontours or with 2-dimensional cross-sectional plots. As such, neither the full wave dynamics nor the true stochastic interpretation are captured adequately in a single representation. Moreover, the dynamics are often provided as videos, so that posterior interaction with the solution by other researchers is not possible. Here, we describe a software tool, called QMBlender, that produces 3D models of Ψ(x, t) at each time as a collection of Monte Carlo sampled coordinates represented by graphics primitives, or particles. QMBlender is a plugin to the popular open source Blender editor, which takes advantage of all its 3D editing, I/O, materials/lighting, and rendering capabilities. The resulting 3D models allow for posterior web-based interactive exploration, which we describe and argue could be a new paradigm for communicating and sharing results of numerical simulations. QMBlender can also be executed in a batch pipeline for producing 3D models, without the need for using the Blender GUI. We also implemented the particle sampling and visualization method using the VTK library for a side-by-side comparison with QMBlender. Here algorithms, implementation details, comparison with other similar systems, and examples from simulation of the Schrodinger equation are provided to show the utility of this software tool., Xunta de Galicia | Ref. GPC2015/019, Universidade de Vigo, Ministerio de Economía, Industria y Competitividad | Ref. FIS2014-58117-P, Agencia Estatal de Investigación | Ref. FIS2017-83762-P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

From optics to dark matter: A review on nonlinear Schrödinger–Poisson systems

  • Paredes Galán, Ángel
  • Olivieri Cecchi, David Nicholas
  • Michinel Álvarez, Humberto Javier
We review recent progress in Schrödinger–Poisson systems in 1+2 and 1+3 dimensions in the presence of nonlinear terms. In a mean field approach, this mathematical model describes the semiclassical behavior of an -body system of identical bosons with nonlocal interactions between them. The 1+2D model can be used to describe the nonlinear propagation of optical beams in thermo-optical media and can be regarded as an analog photonic system for a self-gravitating self-interacting wave, which is the situation of the full 1+3D case, representing the dynamics of coherent dark matter under the assumption that it is made up of ultralight axions. After providing a rough overview of the disparate physical contexts in which the Schrödinger–Poisson equation has been applied, we discuss the main ideas and a number of recent findings in the two aforementioned frameworks. For both setups, we present families of stationary solutions, including vortex states, and discuss the implications of the simulation of propagation dynamics in a number of cases of interest. Finally, we discuss some numerical methods to solve the system of time-dependent partial differential equations., Xunta de Galicia | Ref. ED431B 2018/57, Agencia Estatal de Investigación | Ref. FIS2017-83762-P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Comment on ‘An efficient code to solve the Kepler equation: elliptic case’

  • Tommasini , Daniele
  • Olivieri Cecchi, David Nicholas
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In a recent MNRAS article, Raposo-Pulido and Pelaez (RPP) designed a scheme for obtaining very close seeds for solving the elliptic Kepler equation with the classical and modified Newton–Raphson methods. This implied an important reduction in the number of iterations needed to reach a given accuracy. However, RPP also made strong claims about the errors of their method that are incorrect. In particular, they claim that their accuracy can always reach the level of ∼5ε, where ε is the machine epsilon (e.g. ε = 2.2 × 10−16 in double precision), and that this result is attained for all values of the eccentricity e < 1 and the mean anomaly M ∈ [0, π], including for e and M that are arbitrarily close to 1 and 0, respectively. However, we demonstrate both numerically and analytically that any implementation of the classical or modified Newton–Raphson methods for Kepler’s equation, including those described by RPP, has a limiting accuracy of the order of ∼ε/2(1−e)−−−−−−−√⁠. Therefore the errors of these implementations diverge in the limit e → 1, and differ dramatically from the incorrect results given by RPP. Despite these shortcomings, the RPP method can provide a very efficient option for reaching such limiting accuracy. We also provide a limit that is valid for the accuracy of any algorithm for solving Kepler equation, including schemes like bisection that do not use derivatives. Moreover, similar results are also demonstrated for the hyperbolic Kepler equation. The methods described in this work can provide guidelines for designing more accurate solutions of the elliptic and hyperbolic Kepler equations., Axencia Galega de Innovación, Agencia Estatal de Investigación | Ref. FIS2017-83762-P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Analysis of key variables for energy efficiency in warships

  • Carrasco, Pedro
  • Bendaña Jácome, Ricardo Javier
  • Paredes Galán, Ángel
  • Michinel Álvarez, Humberto Javier
  • Fernández de Córdoba, Pedro
  • Arce Fariña, María Elena
  • Zaragoza Fernández, Sonia
The purpose of this work is to investigate the effect of environmental variables on the electric energy expenditure of a typical surface warship. Studies with similar objectives are much more frequent for merchant ships, but warship operations have peculiarities that will be emphasised. In particular, they spend large fractions of their life cycle at port, during which the vessel remains active. First, a discussion of the embarked systems is presented, pointing out the importance of auxiliary systems and, in particular, heating, ventilation and air conditioning. Quantitative estimates of the energy consumption of those systems are provided. Then, using data taken during real operations of a frigate of the Spanish Navy, correlations are computed between power consumption and different environmental variables. As a novelty, the analysis is carried out separating the different modes of operation of the ship. This leads to interesting conclusions, including a considerable positive correlation between seawater temperature and fuel consumption when the vessel is in port. The effect of a moored ship on the surrounding seawater temperature is studied by a numerical computation. The results suggest that the position of sea chests may be consequential for energy efficiency., Xunta de Galicia | Ref. ED431B 2018/57, Agencia Estatal de Investigación | Ref. FIS2017-83762-P, Ministerio de Economía y Competitividad | Ref. FPDI-2013-17516, Ministerio de Economía y Competitividad | Ref. ENE 2013-48015-C3-1-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Vortex revivals and Fermi-Pasta-Ulam-Tsingou recurrence

  • Paredes Galán, Ángel
  • Blanco Labrador, José
  • Olivieri Cecchi, David Nicholas
  • Salgueiro Piñeiro, José Ramón
  • Michinel Álvarez, Humberto Javier
We study the self-trapped vortex-ring eigenstates of the two-dimensional Schrödinger equation with focusing Poisson and cubic nonlinearities. For each value of the topological charge l, there is a family of solutions depending on a parameter that can be understood as the relative importance of the cubic term. We analyze the perturbative stability of the solutions and simulate the fate of the unstable ones. For l=1 and l=2, there is an interval of the family of eigenstates for which the initial profile breaks apart but subsequently reconstructs itself, a process that can be interpreted as a nontrivial nonlinear oscillation between the vortex and an azimuthon. This revival provides a compelling realization of a recurrence of the Fermi-Pasta-Ulam-Tsingou type. Outside this interval, the vortices can be stable (for small cubic terms) or unstable and nonrecurrent (for large cubic terms). We argue that there is a crossover between these regimes that resembles a strong stochasticity threshold. For l≥3, all solutions are unstable and nonrecurrent. Finally, we comment on the possible experimental implementation of this phenomenon in the context of nonlinear laser beam propagation in thermo-optical media., Agencia Estatal de Investigación | Ref. FIS2017-83762-P, Xunta de Galicia | Ref. ED431B 2018/57
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Bivariate infinite series solution of Kepler’s equations

  • Tommasini , Daniele
A class of bivariate infinite series solutions of the elliptic and hyperbolic Kepler equations is described, adding to the handful of 1-D series that have been found throughout the centuries. This result is based on an iterative procedure for the analytical computation of all the higher-order partial derivatives of the eccentric anomaly with respect to the eccentricity e and mean anomaly M in a given base point (ec,Mc) of the (e,M) plane. Explicit examples of such bivariate infinite series are provided, corresponding to different choices of (ec,Mc), and their convergence is studied numerically. In particular, the polynomials that are obtained by truncating the infinite series up to the fifth degree reach high levels of accuracy in significantly large regions of the parameter space (e,M). Besides their theoretical interest, these series can be used for designing 2-D spline numerical algorithms for efficiently solving Kepler’s equations for all values of the eccentricity and mean anomaly., Ministerio de Economia, Industria y Competitividad, Spain | Ref. FIS2017-83762-P