Skip to main content

Fabricación y análisis mediante espectroscopía Raman de recubrimientos orgánicos funcionalizados

FJC2021-047888-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprogram Subprograma Estatal de Formación
Call Juan de la Cierva Formación
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Powder organic coatings functionalized with calcium ion-exchanged silica corrosion inhibitors

  • Fernández-Álvarez, María
  • Velasco, Francisco
  • Fuente, Daniel de la
  • Bautista, Asunción
[EN] Improved durability in organic coatings could partially solve the important problem of metal corrosion. For this reason, this work has sought to manufacture powder organic coatings after their functionalization with inhibitors, particularly calcium ion-exchanged silica microparticles. The objective is to obtain high-performance coatings with better corrosion resistance, as well as to make them more resistant to abrasive and erosive wear to reduce the likelihood of suffering damage during exposure. Different properties of the original epoxy coating and coatings with two different percentages of calcium ion-exchanged silica inhibitors (1 and 2 % by wt.) were analyzed. The corrosion protection of the new organic coatings was evaluated after performing a controlled mechanical damage. The delamination suffered by each coating was measured using scanning Kelvin probe (SKP) for 26 days, after the addition of a 3.5 % NaCl drop on the provoked defect. In addition, scratch resistance, universal hardness, and wear resistance (sliding and erosive) were studied for all organic coatings to evaluate the effect of the additions on their mechanical properties. The results obtained in this work indicate that small additions of these inhibitors manage to reduce the delamination rate of the coating from a defect and improve the results of the scratch test after immersion in NaCl solution. Moreover, 2 % silica particle additions to the epoxy improve the erosive and the sliding wear performances of the coating., M.F.A. acknowledges financial support from the Ministerio de Universidades (MIU) grant for Requalification of the Spanish University System for 2021–2023, of the Universidad Carlos III de Madrid, of July 1, 2021 and MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR (Grant No FJC2021-047888-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Weathering effect on the wear performance of epoxy powder coatings reinforced with calcium ion-exchanged amorphous silica

  • Fernández-Álvarez, María
  • Calderón-Perea, Nataly E.
  • Bautista, Asunción
  • Velasco, Francisco
Epoxy coatings generally have poor performance when used for exterior applications. After having studied the corrosion benefits obtained with calcium ion-exchanged amorphous silica pigments, the possible weathering advantages they may provide to powder coatings are analyzed in this work for the first time. For that purpose, five epoxy-based powder coatings were studied: the as-received coating (AR), and four epoxy subjected to a hot mixing process with different amounts by weight of silica anticorrosive micropigments (0 %, 1, 2 and 3 %). All epoxy coatings were degraded by ultraviolet radiation with a xenon lamp for 250 h to determine their weathering resistance. The damage suffered by each coating was evaluated quantifying their FTIR spectra, considering the carbonyls and hydroxyls formed during this type of degradation. Subsequently, studies of plastic universal hardness and abrasive and erosive wear were carried out. The results obtained show that these functionalized coatings have better mechanical and wear performance than the commercial coating after xenon light exposure. This is coherent with the fact that the non-reinforced coatings have the greatest degradation both by hydrolysis and photodegradation. After the weathering process carried out, the 3 % coating proves to have the best abrasive and erosive wear performances. Thus, the calcium ion-exchanged silica particles allow the service life of UV exposed epoxy powder coating to be extended, not only because of their anti-corrosive character but also because of their weathering stabilization properties. These findings represent a significant advancement in improving the durability of epoxy powder coatings for exterior applications. © 2024 The Author(s), M.F.A. acknowledges financial support from MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR (Grant No FJC2021-047888-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New Protocol for Twinning of Raman Devices Toward a Raman Intensity Harmonization

  • Fernández-Álvarez, María
  • Moure Arroyo, Alberto
  • Jiménez Reinosa, Julián
  • Diz, E.L.
  • Fernández Lozano, José Francisco
The use of Raman spectroscopy has rapidly been on the rise across a great number of industries where comparability, reproducibility, and reliability of the data are of paramount importance. However, controlling the intensity of the Raman signal depends on a large number of factors such as the wavelength of the laser light, the optical components of each device, or the number of molecules in the illuminated volume. For this reason, in this study, a new protocol has been applied to twin Raman devices to achieve a conversion of the signal between them, by pairing the intensity response of the units using a reference sample. The new reference material is a homogenous dispersion of a 0.5 wt% anatase (titanium dioxide, or TiO2) in an epoxy resin matrix, with deviations <2.5% in Raman intensity across the reference material. The proposed protocol for Raman-twinned devices takes a well-defined approach that leads to obtaining a correction factor that relates the differences in the signal intensity between the two Raman devices, in order to obtain the same Raman intensity counts. The performance of the proposed method was evaluated based on the data from the devices, which presented the most common user cases: twinning Raman devices of the non-confocal same model for two different wavelengths; and twinning confocal and non-confocal devices. The results obtained show that the protocol has worked for both of the Raman twinning cases, allowing the Raman intensity harmonization of Raman spectra between two different devices. © The Author(s) 2024., The authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by EU H2020 Project CHARISMA (Grant No 952921). M.F.A acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Grant No FJC2021-047888-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards quantification of luminance values in photoluminescence and Raman spectroscopies by using a reference material

  • Fernández-Álvarez, María
  • Marín-Cortés, Sonia
  • Moure Arroyo, Alberto
  • Fernández Lozano, José Francisco
Nowadays, quantification in some spectroscopic techniques is a milestone to be achieved. This work aims to develop a new universal methodology to correlate the arbitrary intensity units from a photoluminescence spectrometer with luminance (µcd/mm2), to quantify the photoluminescent intensity of materials. Reference sample composites with different concentrations (0.1–10 % by weight) of Eu<inf>2</inf>O<inf>3</inf> particles in an epoxy matrix were prepared and characterized by photoluminescence and their luminance was then measured with a luminancemeter. The results show that the proposed method successfully relates and quantifies the arbitrary units obtained from a photoluminescence spectrometer with the luminance at a given excitation wavelength. In addition, this study reveals that the method is applicable for quantifying luminescence measurements with a Raman spectrometer, provided that the photoluminescent materials have an excitation response near typical Raman excitation laser wavelengths. Furthermore, this new methodology was validated in the anti-counterfeiting application of value documents. © 2025 Elsevier B.V., All rights reserved., This work was supported by EU H2020 Project CHARISMA (Grant no. 952921) and AFICHES Project from CSIC (PIE 20460E101). M.F.A acknowledges the financial support from MCIN/AEI/10.13039/ 501100011033 and European Union NextGenerationEU/PRTR (Grant no. FJC2021-047888-I)., Supplementary data associated with this article can be found in the online version at doi:10.1016/j.jallcom.2025.178861., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Raman spectroscopy study of the role of dispersion and interfaces in the improvement of the mechanical properties of epoxy-TiO2 composites

  • Fernández-Álvarez, María
  • Moure Arroyo, Alberto
  • Angulo Delgado, Luis
  • Jiménez Reinosa, Julián
  • Fernández Lozano, José Francisco
The final properties and durability of advanced epoxy-based composites reinforced with ceramic particles depend on both the particle dispersion and the particle-matrix interaction. The main objective of this work is to understand the role of TiO<inf>2</inf> particle dispersion in an epoxy matrix by high-resolution confocal Raman spectroscopy, evaluating the nature of their interaction and the crosslinking state of the polymeric matrix. These factors determine the mechanical and wear behaviour of the composites, allowing the properties of the final composite to be explained through spectroscopic measurements, depending on the dispersion state of the filler. To achieve these goals, a novel dispersion method, involving three steps (high-speed stirring, high-shear mixing, and tri-cylinder rolling), was developed. Materials composed of an epoxy matrix and submicrometric TiO<inf>2</inf> particles (0.1–10 wt%) were manufactured using this method and a conventional mechanical agitation method commonly used for comparison. Raman spectroscopy revealed that the advanced method achieved a high degree of homogeneity, reducing filler agglomeration and improving epoxy crosslinking. The epoxy-based composites with effectively dispersed particles exhibit improved mechanical properties, such as increased hardness and reduced wear, compared to both non-reinforced epoxy and materials obtained by conventional mixing. This work highlights the importance of engineering the dispersion and interface of TiO<inf>2</inf> particles in an epoxy matrix and demonstrates the potential to predict the final properties of a composite through a novel evaluation using Confocal Raman microscopy. © 2024 Elsevier B.V., All rights reserved., The authors thank the Carlos III University of Madrid (especially Dr. Francisco Velasco) for supporting the thermal and universal hardness tests. This work was supported by the EU H2020 Project CHARISMA (Grant No 952921) and the AFICHES project (CSIC 202460E101). M.F.A. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Grant No FJC2021-047888-I)., Appendix A. Supplementary data at DOI: https://doi.org/10.1016/j.jmrt.2024.12.181, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spectral harmonization of Raman data for reliable anti-counterfeiting analysis

  • Fernández-Álvarez, María
  • Moure Arroyo, Alberto
  • Rabasco, Pablo
  • Gómez, Esther
  • García-Juez, Vicente
  • Fernández Lozano, José Francisco
Interoperability, understood as the ability of instruments to exchange, compare and integrate Raman spectra acquires from different instruments, is one of the major challenges across different laboratories, centers or industries. Among the various fields aiming for interoperability and harmonization between instruments, detecting counterfeiting in high-value documents is a key application. Therefore, the main objective of this work is to establish a feasible approach to harmonize different Raman systems to enable the comparison of Raman spectra within the context of counterfeit detection. The goal is to ensure that different Raman systems produce equivalent results, thereby fostering interoperability among Raman instruments. The proposed method has been validated using two excitation laser wavelengths (785 and 532 nm) and two different materials (potassium‑sodium niobate and polystyrene), and applied to a particular case study. A chemometric study based on Principal Component Analysis (PCA) was also performed to study the reproducibility of the analysis. The main results demonstrate that it is possible to obtain comparable Raman spectra in terms of intensity for both organic and inorganic materials, as well as for the security markers as demonstrators proposed in this work. Furthermore, this work advances the traditional binary validation approach (pass/fail) in anti-counterfeiting applications, as this methodology facilitates the harmonized quantification of Raman intensity in relation to marker concentrations in security documents. This improvement enhances traceability and enables advanced anti-counterfeiting strategies. This study opens a new path for improving the precision and reliability of Raman spectroscopy in fields such as document counterfeiting detection. © 2025 Elsevier B.V., All rights reserved., The authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by EU H2020 Project CHARISMA (Grant No 952921) and CSIC Project AFICHES (n° 202460E101). M.F.A acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Grant No FJC2021-047888-I)., Peer reviewed