Skip to main content

-

FJCI-2015-24405

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Juan de la Cierva Formación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Shape memory effect on electrospun PLA-based fibers tailoring their thermal response

  • Leones, Adrián
  • Lopez, Daniel
  • Fiori, Stefano
  • Peponi, Laura
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] A research on the thermally-activated shape memory behavior of electrospun nanofibers based on polylactic acid (PLA) plasticized with its oligomer (OLA) was conducted with the purpose of obtaining a suitable material to be used in potential biomedical applications. Three different PLA-OLA formulations with 70:30, 80:20 and 90:10 ratios were processed by electrospinning and studied in order to decrease the PLA glass transition temperature to a temperature closer to the human body. For each electrospun formulation mat, the average diameter of electrospun fibers was found to be 757 +/- 193 nm for neat PIA and 768 +/- 207 nm, 620 +/- 121 nm and 476 +/- 80 nm for PLA-OLA 90:10, 80:20 and 70:30 ratios, respectively and correlate it with their mechanical response. First of all, the PLA capability to present shape memory behavior even in non-woven electrospun fibers form has been studied at 60 degrees C. Thus, two values of switching temperatures (45 degrees C and 40 degrees C) were selected in order to evaluate their shape memory response, being temperatures close to the human body temperature. The recovery and fixity ratio of PLA-OLA formulations studied here showed suitable shape memory behavior of the electrospun systems with excellent values of strain fixity as well as strain recovery ratios indicating these materials appropriate for potential biomedical application., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with FEDER funds. A.S. and L.P. acknowledge the "Juan de la Cierva" (FJCI-2015-24405) and "Ramon y Cajal" (RYC-2014-15595) contracts from MINEICO, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enzymatic Degradation of Poly(butylene succinate) Copolyesters Synthesized with the Use of Candida antarctica Lipase B

  • Wcislek, Aleksandra
  • McClain, Andrew
  • Piegat, Agnieszka
  • Sobolewski, Peter
  • Puskas, Judit
  • El Fray, Miroslawa
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] Biodegradable polymers are an active area of investigation, particularly ones that can be produced from sustainable, biobased monomers, such as copolymers of poly(butylene succinate) (PBS). In this study, we examine the enzymatic degradation of poly(butylene succinate-dilinoleic succinate) (PBS-DLS) copolymers obtained by green enzymatic synthesis using lipase B from Candida antarctica (CALB). The copolymers differed in their hard to soft segments ratio, from 70:30 to 50:50 wt %. Enzymatic degradation was carried out on electrospun membranes (scaffolds) and compression-moulded films using lipase from Pseudomomas cepacia. Poly(epsilon-caprolactone) (PCL) was used as a reference aliphatic polyester. The degradation process was monitored gravimetrically via water uptake and mass loss. After 24 days, approx. 40% mass loss was observed for fibrous materials prepared from the PBS-DLS 70:30 copolymer, as compared to approx. 10% mass loss for PBS-DLS 50:50. Infrared spectroscopy (FTIR) and size exclusion chromatography (SEC) analysis were used to examine changes in chemical structure. Differential scanning calorimetry (DSC) and scanning light microscopy (LSM) revealed changes in degree of crystallinity, and changes in surface morphology, consistent with a surface erosion mechanism. We conclude that the obtained copolymers are suitable for tissue engineering applications thanks to tuneable degradation and lack of acidification during breakdown., This work was financially supported by the National Science Centre, Poland, underthe HARMONIA program under agreement No.UMO-2014/14/M/ST00610. ASO acknowledge the Juan de la Cierva ·(FJCI-2015-24405) contract from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Kinetic studies of biocatalyzed copolyesters of poly(butylene succinate) (PBS) containing fully bio-based dilinoleic diol

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • McClain, Andrew
  • Puskas, Judit E.
  • El Fray, Miroslawa
[EN] A series of segmented bio-copolyesters based on crystallizable hard segments of poly(butylene succinate) (PBS) and fully bio-based dilinoleic diol (DLAOH), creating dilinoleic succinate (DLS) soft segments, were prepared by enzymatically catalyzed polycondensation. The kinetic studies performed with H-1 NMR and SEC have proved incorporation of highly hydrophobic DLAOH into the polymer backbone. We found that the efficacy of DLAOH incorporation was limited by the catalytic pocket size of the enzyme and its hydrophobic nature favouring the formation of long PBS sequences, especially at the early synthesis stages and having an effect on final content of soft segments compared to feed ratio. Based on quantitative C-13 NMR analysis we found that copolymers had R-values lower than 1, that is low degree of randomness. Differential scanning calorimetry (DSC) revealed changes in degree of crystallinity and the presence of a phase mixed system., This work is financially supported by National Science Centre, Poland, under the HARMONIA scheme (agreement No. UMO-2014/14/M/ST8/00610). A.S. wants to acknowledge the "Juan de la Cierva" (FJCI-2015-24405) contract from the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Architectured helically coiled scaffolds from elastomeric poly(butylene succinate) (PBS) copolyester via wet electrospinning

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Sahay, Rahul
  • Stepien, Karolina
  • Bukala, Julia
  • Wcislek, Aleksandra
  • McClain, Andrew
  • Sobolewski, Peter
  • Sui, XiaoMeng
  • Puskas, Judit E.
  • kohn, Joachim
  • Wagner, H. Daniel
  • El Fray, Miroslawa
[EN] Electrospinning is one of the most investigated methods used to produce polymeric fiber scaffolds that mimic the morphology of native extracellular matrix. These structures have been extensively studied in the context of scaffolds for tissue regeneration. However, the compactness of materials obtained by traditional electrospinning, collected as two-dimensional non-woven scaffolds, can limit cell infiltration and tissue ingrowth. In addition, for applications in smooth muscle tissue engineering, highly elastic scaffolds capable of withstanding cyclic mechanical strains without suffering significant permanent deformations are preferred. In order to address these challenges, we report the fabrication of microscale 3D helically coiled scaffolds (referred as 3D-HCS) by wet-electrospinning method, a modification of the traditional electrospinning process in which a coagulation bath (non-solvent system for the electrospun material) is used as the collector. The present study, for the first time, successfully demonstrates the feasibility of using this method to produce various architectures of 3D helically coiled scaffolds (HCS) from segmented copolyester of poly (butylene succinate-co-dilinoleic succinate) (PBS-DLS), a thermoplastic elastomer. We examined the role of process parameters and propose a mechanism for the HCS formation. Fabricated 3D-HCS showed high specific surface area, high porosity, and good elasticity. Further, the marked increase in cell proliferation on 3D-HCS confirmed the suitability of these materials as scaffolds for soft tissue engineering., This work is financially supported by National Science Centre, Poland, under the HARMONIA scheme (agreement No. UMO-2014/14/M/ST8/00610). The authors thank Dr. Karol Fijalkowski (Faculty of Biotechnology and Animal Husbandry, ZUT) for access to the multifunctional plate reader. A. S. acknowledges the "Juan de la Cierva" (FJCI-2015-24405) contract from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Multifunctional Biodegradable Nanocomposites based on PLA and Chitosan-coated Silver Nanoparticles

  • Sonseca, Águeda
  • Madani, S.
  • Echeverría, Coro
  • Rodríguez, G.
  • Leonés, Adrián
  • Peponi, Laura
  • Chavef, N.
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Foiri, S.
  • López García, Daniel
Significant progress has been made in the last years in the study of biodegradable polymer materials with functionalities similar to those of non-biodegradable polymers, both of natural and of synthetic origin, extending their applicability to fields like food packaging, production of biomedical materials, agriculture, etc. In this sense, biodegradable nanocomposites offer new and exciting possibilities. We report on the development of multifunctional polymer nanocomposites that can undergo biodegradation in composting conditions. In particular, a research on the thermally-activated shape memory behaviour of films based on polylactic acid (PLA) and chitosan-coated silver nanoparticles (Ag@chitosan) was conducted with the purpose of obtaining a suitable material to be used in potential food packaging applications. In order to increase the stretchability of the films, 20 wt% of oligomeric lactic acid was added as plasticizer. Six different PLA-OLA-Ag@chitosan formulations with different proportions of Ag@chitosan from 0 to 5 wt.% were processed by extrusion. Subsequently, films were obtained by compression moulding at 180ºC and 50 Pas. Nanocomposite films were characterized for their thermal and mechanical properties in order to fix the experimental conditions for the shape memory experiments. The PLA capability to present shape memory behaviour was studied at 60ºC, and temperatures around 45°C. The recovery and fixity ratio of the different PLA-OLA-Ag@chitosan formulations studied here showed suitable shape memory behaviour with good values of strain fixity, as well as strain recovery ratios. Finally, bionanocomposite films showed appropriate disintegration in compost conditions in preliminary results (not shown here). Thus, showing their potential as biobased and biodegradable multifuctional active food packaging materials., This work is funded by MAT2017-88123-P. AS, CE and LP also acknowledge FJCI-2015-24405, IJCI-2015-26432 and RYC-2014-15595 contracts from MINEICO, respectively.