Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integral Fractionation of Rice Husks into Bioactive Arabinoxylans, Cellulose Nanocrystals, and Silica Particles

  • Requena-Peris, Raquel
  • Jiménez Quero, A.
  • Moriana Torró, Rosana
  • Vilaplana Domingo, Francisco Javier
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Rice husk is an important agricultural byproduct that has not been exploited yet to full capacity for advanced applications. The feasibility of obtaining high-value products such as bioactive hemicelluloses and cellulose nanocrystals (CNCs) from rice husk is here demonstrated in a cascade biorefinery process using subcritical water extraction (SWE) prior to bleaching and acid hydrolysis and compared to traditional alkali pretreatments. The proposed SWE process enables the isolation of bioactive arabinoxylans with phenolic acid moieties, thus preserving their antioxidant and antibacterial properties that are lost during alkaline conditions. Additionally, SWE can be combined with subsequent bleaching and acid hydrolysis to obtain CNCs with large aspect ratio, high crystallinity, and thermal stability. The hydrothermal process also enables the recovery of silica particles that are lost during the alkali step but can be recovered after the isolation of the CNCs. Our biorefinery strategy results in the integral valorization of rice husk into their molecular components (bioactive arabinoxylans, cellulose nanocrystals, and silica particles), which can be used as additives for food applications and as reinforcing agents in biocomposite materials, respectively., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant. This research work was also financed with a Short Term Scientific Mission of the COST Action FP1405.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

NOVEL ELECTROSPUN POLYHYDROXYALKANOATE BASED HIGH BARRIER AND ACTIVE BIOPAPERS OF INTEREST IN FOOD PACKAGING

  • Cherpinski Correa, Adriane
[ES] La presente tesis doctoral tuvo como objetivo desarrollar nuevos materiales biodegradables hechos a base de fibras obtenidas mediante la técnica de electroestirado, denominadas "biopapers" o biopapeles, con barrera a agua y a gases y propiedades de secuestro de oxígeno para su posible aplicación en recubrimientos de papel o como capas intermedias en envases alimentarios basados en papel y cartón. En un primer estudio, se desarrollaron biopapeles de PHB mediante electroestirado, usando dos tipos de colectores, colectores de placa plana y rotativo, para evaluar la influencia del alineamiento de las fibras. Con posterioridad se aplicó un tratamento de recocido por debajo del punto de fusión del polímero a diferentes temperaturas, tiempos y procesos de enfriamiento para obtener películas continuas por coalescencia de las fibras, lo que a su vez condujo a la adhesión entre capas, y a una mejora en las propriedades barrera y ópticas. En un segundo estudio, se depositaron biopapeles monocapa y multicapa hechos de PHB, PVOH y PLA sobre un sustrato de papel no estucado, utilizando los dos colectores citados; y el tiempo de procesamiento por electrospinning se varió para producir espesores diferentes. Para mejorar la adhesión al sustrato de papel, y las propiedades ópticas y de barrera de las multicapas, los biopapeles se sometieron a un proceso de recocido como se describe y optimiza en el primer estudio. Con respecto a la barrera al agua, el sistema de papel/ PVOH/PHB presentó las mejores propriedades. En un tercer estudio, se obtuvieron dos nanopapeles de alta barrera hechos a base de nanofibras de celulosa de dos tipos, nanofibras de celulosa (CNF) y nanofibras de lignocelulosa (LCNF) y se recubrieron con biopapeles de PHA electroestirados con barrera a agua. Como resultado, el carácter hidrófobo de los nanopapeles se mejoró significativamente. Por otra parte, estos también exhibieron un rendimiento mecánico más equilibrado. En un cuarto estudio, se desarrollaron biopapeles de PHA con capacidad activa de secuestro de oxígeno, para lo cual se usaron nanopartículas de paladio (PdNP) como catalizadores de la respuesta activa. La principal dificultad asociada con las nanopartículas es mantenerlas dispersas, por lo que en este trabajo evaluamos el uso de surfactantes CTAB y TEOS como sustancias permitidas en contacto con alimentos para ayudar a la dispersión y distribución de PdNP dentro de las fibras de PHA. Como resultado, se prepararon nanocompuestos electroestirados con capacidad de secuestro de oxígeno hechos de PHB y PdNP, seguidos de un tratamiento de recocido para obtener capas continuas y autoadhesivas. La capacidad de secuestro de oxígeno de los biopapeles, medida a un 100% de humedad relativa (HR), mostró un mejor rendimento para el material en forma de fibra que en forma de film. En cualquier caso, los resultados indicaron una cinética de absorcion relativamente baja. Con el fin de mejorar aún más la cinética de secuestro de oxígeno, incluso a una humedad intermedia y en forma de película, un quinto estudio, desarrolló biopapeles multicapa hechos de PCL y PHA aplicados sobre papel no estucado. Los nanocompuestos de PCL/PdNP mostraron uma cinética de secuestro de oxígeno mucho mayor que la del sistema PHA / PdNP anterior. Este resultado se atribuye a la mayor fración de volumen libre del PCL que permite que la humedad, el hidrógeno y la permeación de oxígeno desencadenen la reacción de eliminación catalítica de forma más eficiente. Finalmente, un sexto estudio, desarrolló un nuevo concepto de capa con capacidad de secuestro de oxígeno y con alta barrera passiva a gases y vapores orgánicos basado en PdNP, CNC y EVOH. Así, CNC y CNC oxidado com TEMPO (TEMPO oxidized CNC), se utilizaron para producir PdNP in situ sobre el nanorefuerzo, que se incorporaron en la matriz del polímero EVOH. El TEMPO oxidized CNC demostró poseer una mayor absorción de oxígeno debido a los grupos car, [CA] La present tesi doctoral va tindre com a objectiu desenvolupar noves capes biodegradables actives obtingudes mitjançant electrospinning, denominades "biopapers" o biopapeles, amb barrera a aigua i a gasos i propietats de segrest d'oxigen per a la seua possible aplicació en recobriments de paper o com a capes intermèdies en envasos alimentaris basats en paper i cartó. En un primer estudi, es van desenvolupar bio-papers de PHB mitjançant electrospinning, utilitzant dos tipus de col·lectors, col·lectors de placa plana i rotatiu, per a avaluar la influència de l'alineament de les fibres. Amb posterioritat es va aplicar un tractament de recuita per davall del punt de fusió del polímer a diferents temperatures, temps i processos de refredament per a obtenir pel·lícules contínues per coalescència de les fibres, la qual cosa al seu torn va conduir a l'adhesió entre capes, i a una millora en les propietats barrera i òptiques. En un segon estudi, es van depositar bio-papers monocapa i multicapa fets de PHB, PVOH i PLA sobre un substrat de paper no estucat, utilitzant els dos col·lectors citats; i el temps de processament per electrospinning es va variar per a produir grossàries diferents. Per a millorar l'adhesió al substrat de paper, i les propietats òptiques i de barrera de les multicapes, els biopapers es van sotmetre a un procés de recuita com es descriu i optimitza en el primer estudi. Respecte a la barrera a l'aigua, el sistema de paper/PVOH/PHB va presentar les millors propietats. En un tercer estudi, es van obtenir dos nano-papers d'alta barrera fets a base de nanofibres de cel·lulosa de dos tipus, nanofibres de cel·lulosa (CNF) i nanofibres de lignocel·lulosa (LCNF) i es van recobrir amb bio-papers de PHA electro-estirats amb barrera a aigua. Com a resultat, el caràcter hidròfob dels nano-papers es va millorar significativament. D'altra banda, aquests també van exhibir un rendiment mecànic més equilibrat. En un quart estudi, es van desenvolupar bio-papers de PHA amb capacitat activa de segrest d'oxigen, per a això es van usar nanopartícules de pal·ladi (PdNP) com a catalitzadors de la resposta activa. La principal dificultat associada amb les nanopartícules és mantenir-les disperses, per la qual cosa en aquest treball avaluem l'ús de surfactants CTAB i TEOS com a substàncies permeses en contacte amb aliments per a ajudar la dispersió i distribució de PdNP dins de les fibres de PHA. Com a resultat, es van preparar nano-compostos electro-estirats amb capacitat de segrest d'oxigen fets de PHB i PdNP, seguits d'un tractament de recuita per a obtenir capes contínues i autoadhesives. La capacitat de segrest d'oxigen dels bio-papers, mesurada a un 100% d'humitat relativa (HR), va mostrar un millor rendiment per al material en forma de fibra que en forma de film. En qualsevol cas, els resultats van indicar una cinètica de absorció relativament baixa. Amb la finalitat de millorar encara més la cinètica de segrest d'oxigen, fins i tot a una humitat intermèdia i en forma de pel·lícula, un cinquè estudi, va desenvolupar bio-papers multicapa fets de PCL i PHA aplicats sobre paper no estucat. Els nano-compostos de PCL/PdNP van mostrar una cinètica de segrest d'oxigen molt major que la del sistema PHA/PdNP anterior. Aquest resultat s'atribueix a la major fracció de volum lliure del PCL que permet que la humitat, l'hidrogen i la permeància d'oxigen desencadenen la reacció d'eliminació catalítica de forma més eficient. Finalment, un sisè estudi, va desenvolupar un nou concepte de capa amb capacitat de segrest d'oxigen i amb alta barrera passiva a gasos i vapors orgànics basat en PdNP, CNC i EVOH. Així, CNC i CNC oxidat com TEMPO (TEMPO oxidat CNC), es van utilitzar per a produir PdNP in situ sobre el nano-reforç, que es van incorporar en la matriu del polímer EVOH. El TEMPO oxidat CNC va demostrar posseir una major absorció d'oxigen degut als grups carboxílics generats., [EN] The present PhD thesis aimed to develop novel active fiber based biodegradable layers obtained by electrospinning, so-called biopapers, with water and gas barrier and oxygen scavenging properties for their potential use as paper coatings or packaging interlayers in fiber based packaging. In a first study, PHB biopapers were obtained by electrospinning, by means of two types of collectors namely, flat plate and rotation drum collectors, to evaluate the influence of the alignment of fibers. Annealing post-processing below the polymer melting point was carried at different temperatures, isothermal times and cooling processes to obtain transparent and pore free continuous films by fibers coalescence which in turn led to interlayer adhesion, enhanced barrier and optical properties. In a second study, mono and multilayer biopapers comprising PHB, PVOH and PLA were deposited onto a conventional uncoated paper substrate, using the cited two collectors; and the electrospinning processing time was varied to produce different thickneses. To enhance adhesion to the paper substrate, optical and barrier performance of the multilayer, the biopapers were subjected to an annealed process as described and optimized in the first study. Regarding water barrier, the system paper/PVOH/PHB presented the highest barrier performance. In a third study, environmentally friendly materials such as cellulose based nanopapers, i.e. gas barrier layers made of cellulose nanofibrils (CNFs) and lignocellulose nanofibrils (LCNFs), were obtained and coated with the water barrier electrospun PHA biopapers. As a result, the hydrophobic character of the nanopapers was significantly improved by the electrospun biopapers. Moreover, these also exhibited a more balanced mechanical performance. In a fourth study, active oxygen scavenging PHA biopapers were developed, in which palladium nanoparticles (PdNP) were used as catalysts to scavenge oxygen from the headspace. The main difficulty associated with nanoparticles is to keep them dispersed, so in this work we assessed the use of CTAB and TEOS surfactants as food contact permitted substances to help dispersion and distribution of the PdNP within the PHA fibers. As a result, oxygen scavenging nanocomposite biopapers made of electrospun PHB and PdNP were prepared, followed by annealing treatment to obtain homogeneous and continuous active layers. The oxygen scavenging capacity at 100% relative humidity (RH) of the biopapers in fiber form showed better performance than their annealed specimens as expected, but in general this was not considered optimal. In order to improve further the oxygen scavenging capacity, even at a low relative humidity and in film form, a fifth study, developed multilayered biopapers made of PCL and PHA coated on conventional cellulose paper. The PCL/PdNP nanocomposites showed much more enhanced oxygen scavenging performance in comparison with the above PHA/PdNP system. This result is attributed to the higher fractional free volume of the PCL polymer that allows moisture, hydrogen and oxygen permeation to trigger the catalytic scavenging reaction. Finally, a sixth study, developed a solvent casting high gas barrier and active oxygen scavenging layer concept based on PdNP, CNC and EVOH. Thus, CNC and TEMPO oxidized CNC, were used to produce in situ PdNP, which were incorporated into the EVOH polymer matrix. The TEMPO oxidized CNC exhibited higher oxygen absorption due to the generated carboxylic groups., Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R for financial support. A. Cherpinski also would like to thank the Brazilian Council for Scientific and Technological Development (CNPq) of Brasilian Government for her predoctoral grant (205955/2014-2). A. Cherpinski also acknowledges the European Cooperation in Science and Technology (COST) Action FP1405 for funding through a Short Term Scientific Mission (STSM)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Melt processability, characterization, and antibacterial activity of compression-molded green composite sheets made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced with coconut fibers impregnated with oregano essential oil

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Hilliou, Loic
  • Meléndez-Rodríguez, Beatriz
  • Figueroa-López, Kelly Johana
  • Madalena, Daniel
  • Cabedo, Luis
  • Covas, Jose A.
  • Vicente, Antonio
  • Lagaron, Jose M.
[EN] New packaging materials based on green composite sheets consisting of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and coconut fibers (CFs) were obtained by twin-screw extrusion (TSE) followed by compression molding. The effect of varying the CF weight content, i.e. 1, 3, 5, and 10¿wt.-%, and the screw speed during melt processing, i.e. 75, 150, and 225¿rpm, on both the aspect ratio and dispersion of the fibers was analyzed and related to the properties of the compression-molded sheets. Finally, the CFs were impregnated with oregano essential oil (OEO) by an innovative spray coating methodology and then incorporated into PHBV at the optimal processing conditions. The functionalized green composite sheets presented bacteriostatic effect against Staphylococcus aureus from fiber contents as low as 3¿wt.-%. Therefore, the here-prepared CFs can be successfully applied as natural vehicles to entrap extracts and develop green composites of high interest in active food packaging to provide protection and shelf life extension., This research was funded by the EU H2020 project YPACK (reference number 773872), the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684), and the BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund (ERDF) under the scope of Norte2020 - Programa Operacional Regional do Norte. Prof. Sergio Torres-Giner wants to thank the European Cooperation in Science and Technology (COST) Action FP1405, ActInPak, for financial support during his Short Term Scientific Mission (STSM) at the University of Minho.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation, characterization and antimicrobial properties of electrospun polylactide films containing Allium ursinum L. extract

  • Radusin, Tanja
  • Stupar, Alena
  • Ristic, Ivan
  • Miletic, Aleksandra
  • Novakovic, Aleksandra
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Novel active films of polylactide (PLA) containing extract of Allium ursinum L. (AU), also called wild garlic, at 10 wt% were succesfully prepared by the electrospinning technology. Electrospinning of the AU-containing PLA solutions yielded fibers in the 1-2 mu m range with a beaded-like morphology, suggesting that the AU extract was mainly encapsulated in certain fiber regions. The resultant electrospun mats were then subjected to annealing at 135 degrees C to obtain continuous films of application interest in active packaging. The film cross-sections revealed that the AU extract was incorporated into the PLA matrix in the form of micro-sized droplets. The thermal properties showed that the AU extract addition plasticized the PLA matrix and also lowered its crystallinity degree as it disrupted the ordering of the PLA chains by hindering their folding into the crystalline lattice. Thermal stability analysis indicated that the natural extract positively contributed to a delay in thermal degradation of the biopolymer and it was thermally stable when encapsulated in the PLA film. The AU extract incorporation also produced a mechanical reinforcement on the electrospun PLA films and improved slightly the water barrier performance. Finally, a significant antimicrobial activity of the electrospun PLA films containing the natural extract was achieved against foodborne bacteria., This paper has been supported by the COST Action FP1405 Active and intelligent fiber-based packaging - innovation and market introduction (ActInPak), FOODStars project Food Product Development Cycle: Frame for stepping Up Research Excellence of FINS (Grant Agreement 692276), the Spanish Ministry of Science, Innovation, and Universities (MICIU, project AGL2015-63855-C2-1-R) and the EU H2020 project YPACK (reference number 773872). Torres-Giner also acknowledges MICIU for his Juan de la Cierva-Incorporacion contract (IJCI-2016-29675).
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Active packaging applications for food

  • Yildirim, Selçuk
  • Röcker, Bettina
  • Pettersen, Marit Kvalvåg
  • Nilsen‐Nygaard, Julie
  • Ayhan, Zehra
  • Rutkaite, Ramune
  • Radusin, Tanja
  • Suminska, Patrycja
  • Marcos, Begonya
  • Coma, Véronique
The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, “healthier,” and higher‐quality foods, ideally with a long shelf‐life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to “deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food.” Active packaging materials are thereby “intended to extend the shelf‐life or to maintain or improve the condition of packaged food.” Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide‐releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption., info:eu-repo/semantics/acceptedVersion
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Holistic approach to a successful market implementation of active and intelligent food packaging

  • Tiekstra, Sanne
  • Dopico Parada, Ana Isabel
  • Koivula, Hanna
  • Lahti, Johanna
  • Buntinx, Mieke
Market implementation of active and intelligent packaging (AIP) technologies specifically for fiber-based food packaging can be hindered by various factors. This paper highlights those from a social, economic, environmental, and legislative point of view, and elaborates upon the following aspects mainly related to interactions among food packaging value chain stakeholders: (i) market drivers that affect developments, (ii) the gap between science and industry, (iii) the gap between legislation and practice, (iv) cooperation between the producing stakeholders within the value chain, and (v) the gap between the industry and consumers. We perceive these as the most influential aspects in successful market implementation at a socioeconomic level. The findings are supported by results from quantitative studies analyzing consumer buying expectations about active and intelligent packaging (value perception of packaging functions, intentions to purchase AIP, and willingness to pay more) executed in 16 European countries. Finally, in this paper, we discuss approaches that could direct future activities in the field towards industrial implementation., European Cooperation in Science and Technology | Ref. COST action FP1405 - Active and intelligent fibre-based packaging - innovation and market introduction (ActInPak)
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Building value with packaging: Development and validation of a measurement scale

  • Dopico Parada, Ana Isabel
  • López Miguens, María Jesús
  • Álvarez González, Paula
In the absence of studies that include holistically all the current functionalities of packaging, this research develops and validates at confirmatory level a third-order scale for measuring the functional value of packaging. The measure accounts for protection, convenience, portability & storage, information, branding, engagement, sustainability and economy and considers active and intelligent functions. The psychometric properties of the scale are analysed in a total of 5 studies. Results indicates that protection, sustainability and information are the most relevant functions. This scale amounts to a useful tool that can serve as a framework for managers in numerous sectors.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Active packaging applications for food

  • Yildirim, Selçuk
  • Röcker, Bettina
  • Pettersen, Marit Kvalvåg
  • Nilsen‐Nygaard, Julie
  • Ayhan, Zehra
  • Rutkaite, Ramune
  • Radusin, Tanja
  • Suminska, Patrycja
  • Marcos, Begonya
  • Coma, Véronique
The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, “healthier,” and higher‐quality foods, ideally with a long shelf‐life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to “deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food.” Active packaging materials are thereby “intended to extend the shelf‐life or to maintain or improve the condition of packaged food.” Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide‐releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption., info:eu-repo/semantics/acceptedVersion