Skip to main content

PARTICIPACION EN EL EXPERIMENTO CMS DEL LHC: PIXEL UPGRADE PARA ALTA LUMINOSIDAD

FPA2017-85155-C4-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Results on proton-irradiated 3D pixel sensors interconnected to RD53A readout ASIC

  • Duarte Campderros, J.
  • Currás, Esteban
  • Fernández-García, Marcos
  • Gómez, Gervasio
  • García, A.
  • González, Javier
  • Silva Jimenez, E.
  • Vila, Iván
  • Jaramillo, R.
  • Meschini. M.
  • Dinardo, M. E.
  • Gennai, S.
  • Moroni, L.
  • Demaria, N.
  • Monteil, E.
  • Messineo, A.
  • Hidalgo, Salvador
  • Merlos Domingo, Ángel
  • Pellegrini, Giulio
  • Quirion, David
  • Manna, M.
On behalf of the CMS Collaboration: et al., Test beam results obtained with 3D pixel sensors bump-bonded to the RD53A prototype readout ASIC are reported. Sensors from FBK Italy and IMB-CNM (Spain) have been tested before and after proton-irradiation to an equivalent fluence of about 1 × 10 ≠cm (1MeV equivalent neutrons). This is the first time that one single collecting electrode fine pitch 3D sensors are irradiated up to such fluence bump-bonded to a fine pitch ASIC. The preliminary analysis of the collected data shows no degradation on the hit detection efficiencies of the tested sensors after high energy proton irradiation, demonstrating the excellent radiation tolerance of the 3D pixel sensors. Thus, they will be excellent candidates for the extreme radiation environment at the innermost layers of the HL-LHC experiments., This project has been partially supported by the Spanish Ministry of Science, Innovation and Universities under grants FPA2015-71292-C2-2-P, FPA2017-85155-C4-1-R and FPA2017-85155-C4-2-R; and the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement no. 654168 (AIDA-2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Inverse Low Gain Avalanche Detectors (iLGADs) for precise tracking and timing applications

  • Currás, Esteban
  • Carulla, M.
  • Centis Vignali, Matteo
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • Flores, David
  • García Alonso, A.
  • Gómez, Gervasio
  • González, Javier
  • Hidalgo, Salvador
  • Jaramillo, R.
  • Merlos Domingo, Ángel
  • Moll, Michael
  • Pellegrini, Giulio
  • Quirion, David
  • Vila, Iván
arXiv:1904.02061v1, Low Gain Avalanche Detector (LGAD) is the baseline sensing technology of the recently proposed Minimum Ionizing Particle (MIP) end-cap timing detectors (MTD) at the Atlas and CMS experiments. The current MTD sensor is designed as a multi-pad matrix detector delivering a poor position resolution, due to the relatively large pad area, around 1 mm2; and a good timing resolution, around 20–30 ps. Besides, in his current technological incarnation, the timing resolution of the MTD LGAD sensors is severely degraded once the MIP particle hits the inter-pad region since the signal amplification is missing for this region. This limitation is named as the LGAD fill-factor problem. To overcome the fill factor problem and the poor position resolution of the MTD LGAD sensors, a p-in-p LGAD (iLGAD) was introduced. Contrary to the conventional LGAD, the iLGAD has a non-segmented deep p-well (the multiplication layer). Therefore, iLGADs should ideally present a constant gain value over all the sensitive region of the device without gain drops between the signal collecting electrodes; in other words, iLGADs should have a 100% fill-factor by design. In this paper, tracking and timing performance of the first iLGAD prototypes is presented., RD50 Collaboration for its support. This activity was partially supported by the Spanish Ministry of Science under grants FPA2015-71292-C2-2-P, FPA2017-85155-C4-1-R and FPA2017-85155-C4-2-R; and the European Union Horizon 2020 Research and Innovation Framework Programme under Grant Agreement no. 654168 (AIDA-2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Manufacturability and Stress Issues in 3D Silicon Detector Technology at IMB-CNM

  • Quirion, David
  • Manna, M.
  • Hidalgo, Salvador
  • Pellegrini, Giulio
This paper provides an overview of 3D detectors fabrication technology developed in the clean room of the Microelectronics Institute of Barcelona (IMB-CNM). Emphasis is put on manufacturability, especially on stress and bow issues. Some of the technological solutions proposed at IMB-CNM to improve manufacturability are presented. Results and solutions from other research institutes are also mentioned. Analogy with through-silicon-via technology is drawn. This article aims at giving hints of the technology improvements implemented to upgrade from a R&D process to a mature technology., This work has been financed by the Spanish Ministry of Science and Innovation (MICIN) through the Particle Physics National Program (RTI2018-094906-B-C22 and FPA2017-85155-C4-2-R) and by the European Union’s Horizon 2020 Research and Innovation funding program, under Grant Agreement No. 654168 (AIDA-2020). All the manufacturing were performed at the IMB-CNM clean room facilities, member of the Spanish ICTS Network MICRONANOFABS partially supported by MICIN and FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of ionization charge density-induced gain suppression in LGADs

  • Jiménez-Ramos, M. C.
  • García López, J.
  • García-Osuna, Adrián
  • Vila, Iván
  • Currás, Esteban
  • Jaramillo, R.
  • Hidalgo, Salvador
  • Pellegrini, Giulio
This article belongs to the Section Physical Sensors., Gain suppression induced by excess carriers in Low Gain Avalanche Detectors (LGADs) has been investigated using 3 MeV protons in a nuclear microprobe. In order to modify the ionization density inside the detector, Ion Beam Induced Current (IBIC) measurements were performed at different proton beam incidence angles between 0° and 85°. The experimental results have been analyzed as a function of the ionization density projected on the multiplication layer, finding that the increase of ionization density leads to greater gain suppression. For bias voltages close to the gain onset value, this decrease in gain results into a significant distortion of the transient current waveforms measured by the Time-Resolved IBIC (TRIBIC) technique due to a deficit in the secondary holes component. For angles of incidence such that the Bragg peak falls within the sensitive volume of the detector, the formation of microplasmas modifies the behavior of the gain curves, producing an abrupt decrease in gain as the angle increases., This research was funded by the Spanish Ministry of Science, Innovation and Universities grant numbers RTI2018-098117-B-C21 and MCIN/AEI/10.13039/501100011033, the Spanish Ministry of Science, Innovation and Universities/FEDER funds grant numbers ICTS-2020-02-US-4, the Regional Ministry of Economy, Knowledge, Business and University grant number US-1380791 and the European Union’s ERDF program “A Way of making Europe” grant numbers FPA2017-85155-C4-1-R, FPA2017-85155-C4-2-R., Peer reviewed