Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Development and Calibration of a New Dripper-Based Rainfall Simulator for Large-Scale Sediment Wash-off Studies

  • Naves, Juan
  • Anta, Jose
  • Suárez-López, Joaquín
  • Puertas, Jerónimo
[Abstract] Rainfall simulators are useful tools for controlling the main variables that govern natural rainfall. In this study, a new drop-forming rainfall simulator, which consists of pressure-compensating dripper grids above a horizontal mesh that breaks and distributes raindrops, was developed to be applied in wash-off experiments in a large-scale physical model of 36 m2. The mesh typology and size, and its distance to drippers, were established through a calibration where rain uniformity and distributions of raindrop sizes and velocities were compared with local natural rainfall. Finally, the rain properties of the final solution were measured for the three rain intensities that the rainfall simulator is able to generate (30, 50 and 80 mm/h), obtaining almost uniform rainfalls with uniformity coefficients of 81%, 89% and 91%, respectively. This, together with the very suitable raindrop size distribution obtained, and the raindrop velocities of around 87.5% of the terminal velocity for the mean raindrop diameter, makes the proposed solution optimal for wash-off studies, where rain properties are key in the detachment of particles. In addition, the flexibility seen in controlling rain characteristics increases the value of the proposed design in that it is adaptable to a wide range of studies., The first author was in receipt of a Spanish Ministry of Science, Innovation and Universities predoctoral grant FPU14/01778. The project was partially funded by the Spanish Ministry of Science, Innovation and Universities under POREDRAIN project RTI2018-094217-B-C33 (MINECO/FEDER-EU).
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Análisis integral del lavado y arrastre de sólidos en suspensión en cuencas urbanas utilizando un simulador de lluvia a escala real, Comprehensive analysis of sediment wash-off and suspended solids transport in urban catchments using a full-scale rainfall simulator

  • Naves, Juan
  • Puertas, Jerónimo
  • Suárez-López, Joaquín
  • Anta, Jose
[Resumen:] Ante la falta de datos experimentales precisos para el desarrollo y validación de modelos de lavado y transporte de sedimentos en la superficie de cuencas urbanas, en este estudio se presenta una serie de ensayos en los que los procesos involucrados son medidos con detalle en un modelo físico de drenaje urbano dual de 36 m2 a escala real. Durante los experimentos, se han analizado tres intensidades de lluvia y cinco clases de sedimento y se han medido calados y velocidades en superficie mediante técnicas de visualización; calados en colectores; caudales, concentraciones de SST y distribuciones de tamaños de partícula en el flujo de entrada a las arquetas y en el punto de vertido de la red de colectores; y se han realizado balances de masas a partir del sedimento que queda depositado en las distintas partes del modelo. Todos los datos brutos y procesados obtenidos se encuentran disponibles en el repositorio de acceso abierto Zenodo (https://zenodo.org/communities/washtreet)., [Abstract:] Due to the lack of accurate experimental data to develop and validate surface urban wash-off and sediment transport models, this study presents an extensive experimental campaign in which the variables involved in wash-off and sediment transport processes are precisely measured in a 1:1 scale urban drainage physical model of 36 m2. In these experiments, different sediment granulometries and rain intensities were tested measuring surface and in-pipe water depths; surface velocities using imaging techniques; flow discharges, total suspended solids concentrations and particle size distributions at the entrance of the gully pots and at the pipe system outlet; and performing mass balances collecting the sediment that remains deposited at the end of the experiments in the different parts of the model. Raw and processed data obtained is openly available in Zenodo repository (https://zenodo.org/communities/washtreet)., El primer autor ha sido financiado por la beca de doctorado FPU14/01778. Este trabajo ha sido financiado parcialmente a través de los proyectos RTI2018-094217-B-C33 (MINECO/FEDER-UE), UNLC15-DE-2862 (MINECO/FEDER-UE y ED431C 2018/56 (Xunta de Galicia)., Xunta de Galicia; ED431C 2018/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Characterisation of sediments during transport of solids in circular sewer pipes

  • Regueiro-Picallo, Manuel
  • Anta, Jose
  • Suárez-López, Joaquín
  • Puertas, Jerónimo
  • Jácome-Burgos, Juan-Alfredo
  • Naves, Juan
[Abstract:] This research is focused in the monitoring of sediments in circular sewer pipes with different diameters at a flume facility fed with urban wastewater. For this purpose, sediment physical and chemical characteristics, and sediment mobility were recorded. The Structure from Motion photogrammetric technique was used for the measurement of sediment bed evolution. In addition, sediment properties were determined in order to study the cohesiveness of the bed deposits. In particular, the chemical oxygen demand and the oxygen uptake rate of the sediment samples were analysed after different accumulation periods on the pipe inverts, resulting in a relation between these parameters and the mobility processes of solids., This research was funded by the projects ‘SEDUNIT’ Ref. CGL2015-69094-R and ‘OVALPIPE II’ Ref. RTC-2016-4987-5 (MINECO/FEDER, EU). The authors would like to thank Ms Montse Recarey and the companies EDAR Bens SA, EMALCSA and ABN Pipe Systems S.L.U. for their assistance with the experimental work. The research work of Mr Juan Naves was financed by the Spanish Government grant (FPU14/01778).
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Using a 2D Shallow Water Model to Assess Large-Scale Particle Image Velocimetry (Lspiv) and Structure From Motion (Sfm) Techniques in a Street-Scale Urban Drainage Physical Model

  • Naves, Juan
  • Anta, Jose
  • Puertas, Jerónimo
  • Regueiro-Picallo, Manuel
  • Suárez-López, Joaquín
Versión aceptada de https://doi.org/10.1016/j.jhydrol.2019.05.003, [Abstract:] Physically-based numerical modelling of surface processes in urban drainage, such as pollutant wash-off or the assessment of flood risks, requires appropriate calibration and terrain elevation data to properly simulate the overland flows and thus to achieve useful results. Accordingly, this study aims to obtain an accurate representation of the runoff generated by three different rain intensities, 30, 50 and 80 mm/h, in a full-scale urban drainage physical model of 36 m2. The study focuses firstly on applying the Structure from Motion (SfM) photogrammetric technique to carry out a high-resolution and accurate topographic survey. This topography was implemented in a 2D shallow water model and the results were compared with those obtained using traditional data point measured topography. Negligible differences were found when comparing the two models with measured discharges at the physical model gully pots. However, significant differences were obtained in the velocity distributions, especially in the shallowest flow areas where drainage channels of a few millimeters’ depth appeared in the high resolution topographic survey. Results from the numerical model were compared with overland flow velocities, determined by applying a modified Large Scale Particle Image Velocimetry (LSPIV) methodology using fluorescent particles. With the SfM topography, the 2D model was able to obtain a better representation of the experimental data, since small scale irregularities of the pavement surface could be represented in the model domain. At the same time, LSPIV was presented as a very suitable tool for the accurate measurement of runoff velocities in urban drainage models, avoiding the interference of raindrop features in the recorded images and with overland water depths in the order of few millimeters., This work was partially supported by the Spanish Ministry of Science, Innovation and Universities [grants number RTI2018-094217-B-C33, UNLC15-DE-2862 and CGL2015-69094-R MINECO/FEDER, UE]. The first author was in receipt of a Spanish Ministry of Science, Innovation and Universities predoctoral grant [FPU14/01778]. The authors would also like to acknowledge the support of Esteban Sañudo in the development of experiments, and the fruitful discussions with Luis Cea, Beatriz Náscher and Paco Vallés.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Global and local sensitivity analysis to improve the understanding of physically-based urban wash-off models from high-resolution laboratory experiments

  • Naves, Juan
  • Rieckermann, Jörg
  • Cea, Luis
  • Puertas, Jerónimo
  • Anta, Jose
Versión aceptada de https://doi.org/10.1016/j.scitotenv.2019.136152, [Abstract:] Physically-based urban wash-off models are a promising means of studying the transport of finer suspended solids and their associated pollutants during rain events, considering spatial and temporal heterogeneities. This study contributes to the understanding of these models through an in-depth sensitivity analysis to provide the necessary information to simplify the model and deal with parameter identifiability. First, based on twelve tailored high-resolution experiments, the accurate measurement of input variables was used to study the parameters of the Hairsine-Rose sediment transport model through a global sensitivity analysis. Using Standardized Regression Coefficients (SRC) and Extended Fourier Amplitude Sensitivity Test (EFAST) methods, the analysis showed that both the total washed-off mass and the TSS peaks concentration are highly sensitive to the critical mass, which considers the reduction in the detachment of particles when the sediment available decreases and is scattered over the surface. In addition, the rain- and flow-driven detachment parameters were presented as key for smaller and larger sediment particles, respectively. Then, those uncertainties that are associated in field studies with the determination of the model input variables were also considered by conducting a local sensitivity analysis. The initial load of sediment and the mean grain size were seen to be the most important variables, thus underlining the need for very accurate measurements here. Moreover, a precise definition of Harsine-Rose parameters is also necessary to achieve reliable results in order to work on treatment and management techniques to minimize the impact of urban surface contaminants on urban environments., The first author was in receipt of a predoctoral grant [FPU14/01778] and an internship fellowship to visit the EAWAG [EST17/00715] from the Ministry of Science, Innovation and Universities (Spain). The authors would also like to acknowledge fruitful discussions with Andreas Scheidegger and Juan Pablo Carbajal.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Hydraulic, Wash-off and Sediment Transport Experiments in a Full-Scale Urban Drainage Physical Model

  • Naves, Juan
  • Anta, Jose
  • Suárez-López, Joaquín
  • Puertas, Jerónimo
[Abstract] This paper presents a dataset obtained from hydraulic and sediment transport experiments performed in a full-scale urban drainage physical model of 36 m2. The study seeks to accurately measure sediment mobilization through the different parts of the model (surface, gully pots and pipe system), also obtaining a precise characterization of water flow and using realistic rainfall simulator to ensure the transferability of the results. Three different rain intensities and five sediment granulometries were tested in 6 hydraulic and 23 wash-off and sediment transport experiments. The following experimental data were produced: surface elevations and 2D runoff velocities measured by visualization techniques; surface and in-pipe water depths; flow discharges, total suspended solids concentrations and particle size distribution at the entrance of the gully pots and at the pipe system outlet; and sediment mass balances. This data is optimal for developing and validating wash-off and sediment transport formulations in urban drainage models, towards better treatment and management techniques for minimizing the impact of urban surface pollutants on the environments of towns and cities., The first author was in receipt of a Spanish Ministry of Science, Innovation and Universities predoctoral grant [FPU14/01778]. The project also receives funding from the Spanish Ministry of Science, Innovation and Universities under POREDRAIN project RTI2018-094217-B-C33 (MINECO/FEDER-EU).