Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

One-Step Encapsulation of ortho-Disulfides in Functionalized Zinc MOF. Enabling Metal-Organic Frameworks in Agriculture, One-Step Encapsulation of ortho-Disulfides in Functionalized Zinc MOF. Enabling Metal-Organic Frameworks in Agriculture

  • Rodríguez Mejías, Francisco Javier
  • Trasobares Llorente, Susana
  • Varela Montoya, Rosa María
  • González Molinillo, José María
  • Calvino Gámez, José Juan
  • Macías Domínguez, Francisco Antonio
Application of natural products as new green agrochemicals with low average lifetime, low concentration doses, and safety is both complex and expensive due to chemical modification required to obtain desirable physicochemical properties. Transport, aqueous solubility, and bioavailability are some of the properties that have been improved using functionalized metal-organic frameworks based on zinc for the encapsulation of bioherbicides (ortho-disulfides). An in situ method has been applied to achieve encapsulation, which, in turn, led to an improvement in water solubility by more than 8 times after 2-hydroxypropyl-beta-cyclodextrin HP-beta-CD surface functionalization. High-resolution high-angle annular dark-field scanning transmission electron microscopy (HR HAADF-STEM) and integrated differential phase contrast (iDPC) imaging techniques were employed to verify the success of the encapsulation procedure and crystallinity of the sample. Inhibition studies on principal weeds that infect rice, corn, and potato crops gave results that exceed those obtained with the commercial herbicide Logran. This finding, along with a short synthesis period, i.e., 2 h at 25 degrees C, make the product an example of a new generation of natural-product-based herbicides with direct applications in agriculture., This work was financially supported by the "Ministerio de Economia y Competitividad" (Project AGL2017-88083-R), Spain. Furthermore, this work has received financial support from Junta de Andalucia (FQM334), MINECO/FEDER (Projects MAT2017-87579-R). This project has received funding from the European Union's Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. STEM studies were performed at the DME Facilities of SCCYT of the University of Cadiz
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Honeycomb monolithic design to enhance the performance of Ni-based catalysts for dry reforming of methane

  • Agueniou, Fazia
  • Vidal Muñoz, Hilario
  • Yeste Siguenza, María del Pilar
  • Hernández Garrido, Juan Carlos
  • Cauqui López, Miguel Ángel
  • Rodríguez-Izquierdo Gil, José María
  • Calvino Gámez, José Juan
  • Gatica Casas, José Manuel
Supported Ni catalysts (4.5 wt%) using a Ce-Zr oxide (18/82 molar ratio and a ceria-rich surface) depicting advanced redox properties, were deposited by washcoating over cordierite honeycombs (230 and 400 cpsi). FIB-STEM unveiled nanostructure details otherwise undistinguishable by conventional techniques. The catalytic performance was evaluated in the dry reforming of methane at 700-900 ºC, using a CH4:CO2 1:1 feedstock, and exploring high Weight Hourly Space Velocity (115-346 L g-1 h-1). The structured catalysts exhibited better performance than the corresponding powders, reaching values close to thermodynamic limits for both reactants conversion and H2/CO ratio, from 750 ºC, and no deactivation was observed in prolonged experiments (24-48 hours). This was related to both the high catalyst efficiency after being deposited with low loading on the cordierite and the intrinsic advantages of the monolithic reactor, like preventing from the kinetic control that operates in powdered samples under high WHSV or limiting the deactivation., The authors thank the financial support by the Ministry of Economy and Competitiveness of Spain/FEDER Program of the EU (Project MAT2017-87579-R), and the Junta de Andalucía (Groups FQM-110 and FQM-334). We also acknowledge the Cadiz University SC-ICyT for using its facilities for the ICP-AES, XRD, XRF and SEM-EDX measurements, and the Seville University CITIUS for the FIB-(S)TEM studies., Artículo científico de 10 pgs. Publicado el 1 de enero de 2022 y cumplidos dos años desde dicha fecha, se puede incluir el fichero con la versión remitida a publicar en el repositorio institucional RODIN.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Methanation of carbon dioxide over ceria-praseodymia promoted Ni-alumina catalysts. Influence of metal loading, promoter composition and alumina modifier

  • Lechkar, Ali
  • Barroso Bogeat, Adrián
  • Blanco Montilla, Ginesa
  • Pintado Caña, José María
  • Soussi el Begrani, Mohamed
Two series of ceria-praseodymia promoted Ni-alumina catalysts were prepared from two different commercial modified alumina supports (3.5 wt% SiO2-Al2O3 and 4.0 wt% La2O3-Al2O3) by the incipient wetness impregnation method in two successive steps. The resulting materials were characterized in terms of their physico-chemical properties by means of N2 physical adsorption at −196 °C, powder X-ray diffraction (XRD) and temperature programmed reduction with H2 (H2-TPR). Furthermore, the as-prepared catalysts were tested for the CO2 methanation reaction in a fixed-bed reactor at atmospheric pressure, gas hourly space velocity (GHSV) of 72,000 cm3·(h·gcat)−1 and CO2/H2 molar ratio of 1/4 over the temperature range from 25 up to 850 °C. The influence of the nominal Ni loading (3, 5 and 10 wt%), molar composition of the Ce/Pr mixed oxide promoter (80/20 and 60/40), and alumina modifier (silica and lanthana) on the catalytic performance was carefully analyzed. Among these three composition parameters, the alumina dopant and especially the Ni content appear to have by far a much more pronounced effect on both the CO2 conversion and CH4 selectivity as compared to the Ce/Pr mixed oxide composition. Specifically, from the catalytic tests the sample containing a 10 wt% Ni loading, a Ce/Pr mixed oxide promoter of 80/20 molar composition, and silica as modifier provides the highest catalytic activity in terms of CO2 conversion and CH4 selectivity. Such behaviour has been ascribed to a complex interplay between several factors, mainly the larger fraction of catalytically active β-type NiO species and the lesser concentration of strong basic sites on the catalyst surface, as well as the electron back donation effect from the surface Ni atoms to the adsorbed COx species, which favours the C–O bond cleavage (i.e., the rate-determining step of the methanation reaction). These findings are expected to be very helpful in order to rationally design synthetic strategies that allow developing highly active and low cost Ni-based catalysts for the CO2 methanation reaction.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Improving the reducibility of CeO2/TiO2 by high-temperature redox treatment: the key role of atomically thin CeO2 surface layers

  • Manzorro Ureba, Ramón
  • Montes Monroy, José Manuel
  • Goma Jiménez, Daniel
  • Calvino Gámez, José Juan
  • Pérez Omil, José Antonio
  • Trasobares Llorente, Susana
CeO2/TiO2 catalysts treated in reaction environment at high temperatures evolve into complex and diverse systems, where several mixed oxides are formed. To analyze the redox behavior of this system, multiple oxidations and reducing thermal treatments have been applied. Results from the temperature-programmed reduction studies revealed a clear shift at lower temperatures on the reduction peak when the sample was previously reduced at high temperatures and oxidized under mild conditions. Meanwhile, the reduction peak was moved to high temperatures when the sample was previously reduced and oxidized at severe temperatures. The study, which was aimed at correlating this behavior with its chemical structure, was conducted using advanced electron microscopy, including high-resolution TEM and STEM imaging and spectroscopic techniques such as X-EDS and EELS. The data presented here comparing structures at the atomic level and chemical properties have uniquely unveiled that besides the cerium-titanium mixed oxides, a very thin layer up to a single monolayer was deposited along the TiO2 surface, which indeed was responsible for the improvement of the reducing temperature.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Encapsulation of Cynara Cardunculus Guaiane-type Lactones in Fully Organic Nanotubes Enhances Their Phytotoxic Properties

  • Rodríguez Mejías, Francisco Javier
  • Pérez Fernández, Inmaculada
  • Rial Cumbrera, Carlos
  • Varela Montoya, Rosa María
  • González Molinillo, José María
  • Calvino Gámez, José Juan
  • Trasobares Llorente, Susana
  • Macías Domínguez, Francisco Antonio
The encapsulation of bioactive natural products has emerged as a relevant tool for modifying the poor physicochemical properties often exhibited by agrochemicals. In this regard, natural guaiane-type sesquiterpene lactones isolated from Cynara cardunculus L. have been encapsulated in a core/shell nanotube(c)agrochemical system. Monitoring of the F and O signals in marked sesquiterpenes confirmed that the compound is present in the nanotube cavity. These structures were characterized using scanning transmission electron microscopy-X-ray energy-dispersive spectrometry techniques, which revealed the spatial layout relationship and confirmed encapsulation of the sesquiterpene lactone derivative. In addition, biological studies were performed with aguerin B (1), cynaropicrin (2), and grosheimin (3) on the inhibition of germination, roots, and shoots in weeds (Phalaris arundinacea L., Lolium perenne L., and Portulaca oleracea L.). Encapsulation of lactones in nanotubes gives better results than those for the nonencapsulated compounds, thereby reinforcing the application of fully organic nanotubes for the sustainable use of agrochemicals in the future., This research was funded by the Agencia Estatal de Investigacion, Ministerio de Ciencia e Innovacion, grant number PID2020-115747RB-I00/AEI/10.13039/501100011033, Spain. F. J.R.M thanks the University of Cadiz for postdoctoral support under grant 2018-009/PU/EPIF-FPI-CT/CP. Furthermore, this work has received financial support from the Junta de Andalucia (FQM334), MINECO/FEDER (projects MAT2017-87579-R). This project has received funding from the European Union's Horizon 2020 research and innovation program under grant 823717-ESTEEM3. STEM studies were performed at the DME Facilities of SCCYT at the University of Cadiz. We also thank Semillas Fito (Barcelona, Spain) for kindly supplying us with wheat seeds.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Assessment of engineered surfaces roughness by high-resolution 3D SEM photogrammetry

  • Cervera Gontard, Lionel
  • López Castro, Juan de Dios
  • González Rovira, Leandro
  • Vázquez Martínez, Juan Manuel
  • Varela Feria, F.M.
  • Marcos Bárcena, Mariano
  • Calvino Gámez, José Juan
We describe a methodology to obtain three-dimensional models of engineered surfaces using scanning electron microscopy and multi-view photogrammetry (3DSEM). For the reconstruction of the 3D models of the surfaces we used freeware available in the cloud. The method was applied to study the surface roughness of metallic samples patterned with parallel grooves by means of laser. The results are com- pared with measurements obtained using stylus profilometry (PR) and SEM stereo-photogrammetry (SP). The application of 3DSEM is more time demanding than PR or SP, but it provides a more accurate repre- sentation of the surfaces. The results obtained with the three techniques are compared by investigating the influence of sampling step on roughness parameters.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Novel combination of 3D-printing and electrochemical deposition to design and prepare metallic honeycomb supported catalysts for dry reforming

  • Bazta, Otman
  • Botana Pedemonte, Francisco Javier
  • Calvino Gámez, José Juan
  • Cauqui López, Miguel Ángel
  • Gatica Casas, José Manuel
  • Vidal Muñoz, Hilario
  • González Rovira, Leandro
  • López Castro, Juan De Dios
  • Yeste Siguenza, María del Pilar
  • Blanco Montilla, Ginesa
  • Hernández Garrido, Juan Carlos
A multidisciplinary approach has been followed for the development of structured catalysts based on 3D-printed metallic honeycomb monoliths, which allows overcoming some of the barriers that limit the industrial application of significant catalytic processes such as those related to CO2 valorization. In particular, nickel and/or cerium-containing catalysts have been incorporated into stainless steel honeycombs and evaluated in the Dry Reforming of Methane (DRM) reaction. Moreover, taking advantage of the conductive nature of the metallic substrate, a methodology that allows the incorporation of the active phase by electrochemical deposition has been implemented. The prepared catalysts were characterized by SEM coupled EDX compositional analysis, X-ray fluorescence, X-ray diffraction, X-ray Photoelectron Spectroscopy and Temperature-Programmed Reduction. In contrast to the catalyst where cerium and nickel were co-deposited, the catalyst obtained by sequential electrodeposition of Ce (first) and Ni (second) proved to be highly active and stable in the DRM process, with conversions of both CH4 and CO2 above 90% and H2/CO ratio of ca. 0.8 at 750 ºC for more than 40 h. Moreover, the catalyst kept its good performance after doubling the flow proving its great potential for a real application at higher scale., Ministry of Economy and Competitiveness of Spain (Project PID2020-113006-RB-I00) and the Junta de Andalucía (FQM-110, FQM-334 and TEP-231 groups, and Project P20-00918), Número de páginas: 13
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Tailoring CO2 adsorption and activation properties of ceria nanocubes by coating with nanometre-thick yttria layers

  • Barroso Bogeat, Adrián
  • Blanco Montilla, Ginesa
  • Pintado Caña, José María
  • Goma Jiménez, Daniel
  • Calvino Gámez, José Juan
Ceria (CeO2) is a ubiquitous component in catalysts for environmental protection processes, especially those devoted to CO2 valorisation. Aimed at preparing ceria-based nanomaterials with enhanced CO2 adsorption and activation properties, both the surface acid-base and redox features of ceria nanocubes were modulated by a novel, simple, wet chemistry synthetic strategy consisting of their coating with yttria (Y2O3) layers of variable thickness in the nanometre scale. The as-synthesised samples were characterised with special attention to their surface basicity and reducibility. Characterisation results revealed that the surface doping with yttria not only improved both the reducibility at low temperature and CO2 adsorption capacity of ceria nanocubes, but also introduced a variety of basic sites with different strength. Finally, the careful control of the yttria layer thickness allowed to modulate these effects and thereby the ability of nanostructured ceria to adsorb and activate the CO2 molecule.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

An atomically efficient, highly stable and redox active Ce0.5Tb0.5Ox (3% mol.)/MagO catalyst for total oxidation of methane

  • Sánchez Gil, Juan José
  • López Haro, Miguel
  • Hernández Garrido, Juan Carlos
  • Blanco Montilla, Ginesa
  • Cauqui López, Miguel Ángel
  • Rodríguez-Izquierdo Gil, José María
  • Pérez Omil, José Antonio
  • Calvino Gámez, José Juan
  • Yeste Siguenza, María del Pilar
Redox and catalytic performance in total methane oxidation of a nanostructured ceria-terbia catalyst supported on magnesia is presented and compared to that of a pure ceria catalyst supported on MgO. The investigated material, Ce0.5Tb0.5Ox (3% mol.)/MgO, features several remarkable properties: a quite low total molar loading of the two lanthanide elements, high reducibility as well as very high oxygen storage capacity at low temperatures and higher catalytic activity than MgO supported CeO2. In terms of lanthanide atomic content terms, the catalytic performance of Ce0.5Tb0.5Ox (3% mol.)/MgO largely improves that of bulk type ceria and ceria-magnesia solid solutions. Such behavior implies a proper optimization in the usage of the lanthanide elements. A second contribution to atomic economy in the catalyst design relates to the fact that the novel formulation demonstrates a good stability in the redox and catalytic performance against very high temperature treatments. An investigation of the structure of both the fresh and high temperature-aged catalyst at atomic scale, by means of complementary aberration corrected microscopy techniques, reveals the occurrence of a variety of highly dispersed, exotic, lanthanide-containing nanostructures, which span from isolated, atomically dispersed, Ln species, to nanometer-sized CeTbO2-x patches, extended CeTbO2-x bilayers and 3D CeTbO2-x nanoparticles. Nanoanalytical results evidence mixing of the two lanthanides at atomic levels in these nanostructures. The combined effect of nanostructuring, mixing of the lanthanides at atomic level and interaction with the MgO oxide are at the roots of the improvement in functional, redox and catalytic properties of the novel Ce0.5Tb0.5Ox (3% mol.)/MgO catalyst., The authors acknowledge financial support from FEDER/MINECO Projects (Ref: MAT2017-87579-R and MAT2016-81118-P) and Junta de Andalucía (FQM334, FQM110). The Electron Microscopy data were all acquired at DME SC-ICyT UCA, Se registra la plantilla en la que se ha remitido la versión final que resultó aceptada. Conforme a Sherpa Romeo, pasados dos años se puede facilitar el acceso a la versión final remitida por el autor.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Supported Ce/Zr pyrochlore monolayers as a route to single cerium atom catalysts with low temperature reducibility

  • Montes Monroy, José Manuel
  • Manzorro Ureba, Ramón
  • Chinchilla Reyes, Lidia Esther
  • Celín, William E.
  • Calvino Gámez, José Juan
  • Pérez Omil, José Antonio
The combination of structural characterization at atomic resolution, chemical data, and theoretical insights has revealed the unique nanostructures which develop in ceria supported on yttria-stabilized zirconia (YSZ) after being submitted to high-temperature reducing treatments. The results show that just a small ceria loading is needed for creating a supported Zr-rich pyrochlore (111) nanostructure, resembling the structure of single cerium atom catalysts. The specific atomic arrangement of this nanostructure allows to explain the improvement of the reducibility at low temperature. The reduction mechanism can be extrapolated to ceria-zirconia mixed oxides with pyrochlore-like cationic ordering, exposing Zr-rich (111) surfaces. The results gathered here provide key information to understand the redox behavior of these types of systems, which may contribute to improving the design of new ceria-zirconia based materials, with lower content of the lanthanide element, nearly 100% cerium atom utilization, and applications in environmental catalysis.