Skip to main content

METAL Y AMBAR: MODELOS DE CIRCULACION DE MATERIAS PRIMAS EN LA PREHISTORIA RECIENTE DE LA PENINSULA IBERICA.

HAR2017-82685-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Trace elements and lead isotopic composition of copper deposits from the eastern part of the Internal Zone of the Betic Cordillera (SE Iberia): application to provenance of archaeological materials

  • Murillo-Barroso, Mercedes
  • Montero Ruiz, Ignacio
  • Nieto Martínez, J. M.
  • Camalich Massieu, M.D
  • Martín Socas, Dimas
  • Martinón Torres, Marcos
[EN] This paper presents trace element compositions and lead isotope analyses by MC-ICP-MS of 34 copper ore samples from the Internal Zone of the Betic Range, Southeast Spain. Samples were collected during a fieldwork campaign in the mines of Cerro Minado, Pinar de Bédar, Sierra Cabrera and Sierra Almagrera/Herrerías. Most samples are copper oxide minerals from the near surface alteration of the sulfide ore deposits. The aim of the study is to supplement the existing reference data bank on lead isotopic compositions of ancient copper mines from the Iberian Peninsula, complementing this data with trace element compositions. The latter can be useful for discriminating when isotopic overlaps occur. This characterisation will be of great usefulness for provenancing further archaeological materials. Lead isotope ratios range from 18.603 to 20.327 (Pb/Pb); from 15.685 to 15.779 (Pb/Pb) and from 38.728 to 39.702 (Pb/Pb). Data from the literature analysed by TIMS have been also considered for comparison although the larger analytical error is highlighted, especially for isotope Pb. The lead isotopic signature of the analysed samples shows three separate isotopic fields. These fields are also consistent with differences in compositions evidenced by principal component analyses., [ES] En este artículo se presentan análisis de composición de elementos traza y de isótopos de plomo por MC-ICP-MS de 34 muestras minerales de cobre de la Zona Interna de la Cordillera Bética, sureste de España. Las muestras se recogieron durante una campaña de prospección geológico-minera en las minas de Cerro Minado, Pinar de Bédar, Sierra Cabrera y Sierra Almagrera/Herrerías. La mayoría de las muestras minerales son óxidos de cobre de las alteraciones superficiales de los depósitos de sulfuros. El objetivo del estudio es complementar los datos de referencia existentes de isotópos de plomo de las mineralizaciones de cobre de la Península Ibérica, completando estos datos con análisis de composición de elementos traza. Esto último puede ser útil para la discriminación en caso de darse solapamientos isotópicos. Esta caracterización será de gran utilidad para la determinación de procedencia de materiales arqueológicos. Los rangos de isótopos de plomo van de 18.603 a 20.327 (206Pb / 204Pb); de 15.685 a 15.779 (207Pb / 204Pb) y de 38.728 a 39.702 (208Pb / 204Pb). Los análisis antiguos realizados por TIMS y recogidos de la literatura también se han considerado para su comparación, aunque se destaca el mayor error analítico, especialmente para el isótopo 204Pb. La signatura isotópica de las muestras analizadas permite la identificación de tres campos isotópicos separados. Estos campos también son consistentes con las diferencias en los patrones de elementos traza que muestra el análisis de componentes principales., This research was supported by a Marie Curie Intra European Fellowship within the 7th European Community Framework Programme (‘Society, Metallurgy and Innovation: The Iberian Hypothesis’—SMITH project, PN623183); by the R&D Projects HAR2017-82685-R, HAR2011-29068 and HAR-2016-78197-P funded by the Spanish Ministry of Economy and Competitiveness as well as by the Culture Office of the Government of Andalucía (Spain). We are grateful to Alexis Redondo for the design of the base map of Fig. 4
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

La producción de bronces durante El Argar: frecuencia y criterios de uso

  • Montero Ruiz, Ignacio
  • Murillo-Barroso, Mercedes
  • Hook, Duncan
[EN] Tin bronze alloys were first used in the south-east of the iberian peninsula during the period of the El Argar Early Bronze Age culture. In this study, we compiled all the available published elemental analyses in order to understand the frequency and use of this alloy. The data show that some metal types such as halberds were never made of bronze, whereas a great number of personal ornaments (earrings, arm-rings or finger-rings) do contain tin. The chromatic effect by combining different metals and alloys (copper, bronze, silver) in the same object or in the same burial, or the higher or lower social value given to the different metals, could explain the choices in the alloys used instead of just functional or technological advantages during this Early Bronze Age. We also consider the option of metal imports from other Iberian or European regions to explain the presence of the first tin bronzes., [ES] La aleación de cobre con estaño aparece por primera vez en el sureste de la península ibérica en época argárica. En el presente estudio realizamos una recopilación de todos los análisis de composición publicados con el fin de valorar la frecuencia y el uso de esta aleación. Los datos muestran que algunos objetos como las alabardas nunca se fabricaron en bronce y que es en los adornos personales (brazaletes, anillo y pendientes) en los que con mayor frecuencia se detecta esta aleación. El efecto cromático de los metales y aleaciones (cobre, bronce, plata) y su combinación en los ajuares funerarios o el mayor o menor valor social dado a los diferentes metales parecen explicar mejor su elección y uso que los criterios de mejora tecnológica o funcional en esta fase de la Edad del Bronce. Se plantea que los primeros bronces pudieran ser objetos importados de otras regiones peninsulares o europeas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nuevas evidencias sobre el inicio de la metalurgia en el País Valenciano : el yacimiento calcolítico de Sanxo Llop (Gandía, Valencia)

  • Pascual Beneyto, Josep
  • Alapont, Llorenç
  • Murillo, Mercedes
  • Montero Ruiz, Ignacio
Se presentan nuevos datos sobre la actividad metalúrgica en el término de Gandía obtenidos en las excavaciones de las parcelas de Sanxo Llop durante los años del 2010 al 2016. El trabajo recoge la información sobre tres estructuras (59, 105 y 126), una de ellas con un enterramiento infantil. Todas ellas contienen restos metalúrgicos y algunos objetos cuyo estudio mediante caracterización elemental (XRF) y de análisis isótopos de plomo permiten reinterpretar el modelo propuesto hace años para la metalurgia calcolítica del vecino yacimiento de La Vital. La constatación de metalurgia precampaniforme y la aparición de mineral (arseniato de cobre) indican que las estrategias de producción del metal pudieron ser diversas y complementarias a lo largo del amplio tiempo de ocupación de los yacimientos de Gandía en torno a la ribera del río Serpis., Los análisis elementales y de isótopos de plomo han sido financiados por los proyectos de I+D+i HAR2017-82685-R del Ministerio de Economía, Industria y Competitividad y PID2019-108289GB-I00 / AEI / 10.13039/501100011033) del Ministerio de Ciencia e Innovación cuyo IP es Mercedes Murillo-Barroso, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rediscovering famous assemblages: A rare Bronze Age crucible from El Argar, Spain

  • Mongiatt, A.
  • Montero Ruiz, Ignacio
A rare open shallow crucible from the British Museum collection, excavated at the Bronze Agesite of El Argar in south-east Spain by Louis and Henri Siret, was studied using X-radiographyand scanning electron microscopy. The crucible has relatively thick walls, a spout and a non-refractory fabric. It was used for melting copper alloys for various possible purposes, such asalloying, refining, recycling or before casting, at around 1100°C. Both arsenic and tin weredetected in various places and concentrations in the analysed specimens. This crucible couldhave been used during the period of transition from arsenic-rich copper to tin bronzes in the ElArgar culture, or used for the recycling of arsenic-rich copper artefacts being alloyed with tinto produce tin bronzes. This melting crucible is a rare example of its kind to have been inves-tigated scientifically, as most crucibles from contemporary sites on the Iberian Peninsula aregenerally associated with smelting. This study has also crucially shed more light on the typesof alloys and variety of activities undertaken during that transitional period between the use ofarsenical copper and tin bronzes in this region, Thefinal version of this paperwas supported by the research project (grant number HAR2017-82685-R):‘Metal y ámbar:modelos de circulación de materias primas en la Prehistoria Reciente de la península ibérica', Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Reciclado o reutilización del metal en la producción metalúrgica argárica

  • Montero Ruiz, Ignacio
  • Murillo Barroso, Mercedes
  • Rovira Llorens, Salvador
[EN] One of the qualities of metal is that it can be recycled. The greater or lesser use of recycled metal is conditioned, among other factors, by the availability of raw materials and the demand for consumption, but other socio-economic factors also affect the overall volume of recycled metal used in each historical period. In order to validate the scale of metallurgical production and for the interpretation of provenance studies based on lead isotopes analysis (LIA), it is necessary to assess the incidence of recycling. In this research we focus in the argaric Bronze Age and develop three argumentative lines to understand how metal objects were used and evaluate the incidence of recycled metal. Firstly, we define, through the metallic objects themselves, their functional use and how this affect to the amount of metal that could have enter in the recycling system; later we compare the elemental composition to detect the trends that impurities follow after recycling, and finally we use the lead isotope available data to detect the impact of recycling through the mixing lines. All the information suggests that metal recycling was not a basic strategy in the metallurgical production of El Argar, [ES] Una de las cualidades del metal es que puede ser reciclado. El mayor o menor uso del reciclado se ve condicionado, entre otros factores, por la disponibilidad de materia prima nueva y por la demanda de consumo, pero otros factores socioeconómicos influyen también en el volumen general de material reciclado que se emplea en cada periodo histórico. Para interpretar el volumen de producción metalúrgica y en los estudios sobre la procedencia del metal con isótopos de plomo es necesario valorar qué incidencia tiene el reciclado. En este trabajo nos centramos en la Edad del Bronce argárica y desarrollamos tres líneas argumentales que nos permiten conocer cómo se usa el metal y valorar la incidencia de metal reciclado. Primero definiremos, a través de los propios objetos metálicos, qué información funcional pueden aportar sobre la cantidad de metal que entra en el sistema de reciclaje; después usaremos los datos de composición para ver si los modelos de impurezas encajan en las pautas o tendencias esperables de un metal reciclado, y por último utilizaremos la información disponible sobre los isótopos de plomo donde pueden identificarse pautas de reciclado del metal a través de su distribución y la identificación de líneas de mezcla. Todos los datos apuntan a que el reciclaje de metal no fue un factor básico en la producción metalúrgica de El Argar., Este estudio se ha realizado gracias a la subvención obtenida del Ministerio de Economía, Industria y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación orientada a los retos de la Sociedad (HAR2017-82685-R): «Metal y ambar: modelos de Circulación de materias primas en la Prehistoria Reciente de la Península ibérica» cuyo IP es Mercedes Murillo-Barroso, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

The First Bronzes in El Argar: An Approach to the Production and Origin of the Metal

  • Montero Ruiz, Ignacio
  • Murillo-Barroso, Mercedes
Este capítulo está sujeto a una licencia CC BY-NC-ND 3.0, Contrary to copper ore resources, tin is scarce in southeastern Iberia. However, tin is essential to produce the copper/tin alloy called tin bronze. The fi rst use of this alloy in the so-called El Argar Culture is detected in its later phases (from 1900–1800 calBC), although it never constituted the predominant alloy. The absence of metallurgical debris related to bronze smelting limits our understanding on how the alloy was obtained and if cassiterite was co-smelted with copper ores in the Argaric territory or whether metallic tin bronzes were imported to El Argar from regions further away. Tin, as an external resource, would have been exchanged or traded, but there is also the possibility that finished bronze objects were imported as well. Some differential pattern in the presence/absence of arsenic in the composition of metal objects could reflect a double strategy, suggesting that local production of tin bronzes usually contains some arsenic, but tin bronzes without any arsenic could have come from other Iberian regions, or at least that different copper ores for the production of arsenical copper and tin bronze were used. This hypothesis is tested using the available lead isotopes analyses., This paper has been produced within the R&D Project ‘Metal y Ámbar: Modelos de Circulación de Materias Primas en la Prehistoria Reciente de la Península Ibérica’ (HAR2017–82685–R) funded by the Ministry of Science, Innovation and Universities and the R&D Project ‘Metal y Ámbar II: Circulacion de bronce y ámbar en el Sureste peninsular durante la Edad del Bronce’ (PID2019– 108289GB-I00) funded by the Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Objetos metálicos del Calcolítico y la Edad del Bronce hallados en cuevas costeras del NE de Cantabria, Chalcolithic and Bronze Age metal objects found in caves on the north-east coast of Cantabria

  • Fernández Ibáñez, Carmelo
  • Montero Ruiz, Ignacio
  • Bohigas Roldán, Ramón
[EN] Four metal objects (a dagger and three arrow-heads) from four caves in the Castro Urdiales area can be dated culturally from the late Chalcolithic to the Middle Bronze Age. Their analysis has shown that they were made from copper not present on the Cantabrian coast, with the conclusion that these objects came to that prolific coastal place from different parts of the Iberian Peninsula and by different routes. The particular presence of allochthonous objects, which reached the middle sector of the northern Spain from all points of the compass in the middle Bronze Age, is discussed., [ES] A partir del estudio de cuatro objetos metálicos (una daga y tres puntas de flecha) procedentes de otras tantas cuevas del entorno geográfico de Castro Urdiales, culturalmente encuadrables entre el Calcolítico final y el Bronce medio, y cuya analítica ha proporcionado su fabricación en cobre de origen foráneo a la costa cantábrica, se concluye que llegaron hasta aquel prolífico lugar de la costa tanto desde diferentes puntos de la Península como por diferentes caminos. Se reflexiona en torno a la especial presencia de objetos foráneos en la etapa media de la Edad del Bronce, llegados hasta el centro de la cornisa cantábrica desde todos los puntos cardinales, El estudio analítico de estos objetos se ha realizado dentro del marco del Proyecto (HAR2017-82685-R) “Metal y ámbar: modelos de circulación de materias primas en la Prehistoria Reciente de la Península ibérica”, cuya Investigadora Principal es Mercedes Murillo-Barroso de la Universidad de Granada, Peer reviewed