Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Numerical analysis of the fluid flow and heat transfer of a hybrid PV-thermal collector and performance assessment

  • Herrando, María
  • Fantoni, Guillermo
  • Cubero, Ana
  • Simón-Allué, Raquel
  • Guedea, Isabel
  • Fueyo, Norberto
In recent years, new materials and absorber configurations have been proposed to improve the performance of hybrid photovoltaic-thermal (PV-T) collectors. This work analyses the fluid flow and the energy performance of an uncovered water-based PV-T collector with a roll-bond thermal absorber. A detailed CFD model was developed and the results were compared with the experimental performance features provided by the PV-T manufacturer. The fluid flow results show uneven flow distribution among the roll-bond microchannels which leads to areas with larger PV cell temperatures and thus a lower electricity generation. The PV-T collector layers were also modelled using the energy transfer equations layer-by-layer. The model was run for several water inlet temperatures and water flow-rates to obtain the thermal performance curve. The results show that the electrical efficiency of the PV-T collector is 14.5–10.3% larger than for a PV-only system for water inlet temperatures of 20–30 °C, respectively. The developed CFD model reproduces accurately the thermal performance of the PV-T collector, with a maximum error of 6.5% for inlet water temperatures of 20–60 °C. Therefore, this model can be used with confidence to propose alternative designs that achieve a homogeneous temperature distribution in the PV layer and improve the overall PV-T collector performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Flexibility assessment in continuous manufacturing processes based on a physics-informed digitalisation strategy: A case study in the rubber industry

  • Herrando, María
  • Viejo, Ismael
  • Calvo, Susana
  • Gracia, Leticia A.
  • Izquierdo, Salvador
This study develops a physics-informed digitalisation strategy to assess potential flexibility from different perspectives in continuous manufacturing processes. As a case study, the co-extrusion process of sealing profiles for the automotive industry is chosen. This process operates continuously for 3–5 days to manufacture one sealing profile, consuming considerable energy, which is influenced by the process conditions set during the manufacturing line start-up. Increasing flexibility can contribute to a more sustainable and energy-efficient manufacturing industry. However, since process conditions directly affect the final quality and properties of the manufactured profile, any modifications must be preceded by a thorough analysis of their implications based on the sealing profile geometry, different line velocities and product quality tolerances. Computational Fluid Dynamics (CFD) techniques are used to model the co-extrusion process, while Finite Element Methods (FEM) are applied to model product quality and temperature dependencies. A Reduced Order Model (ROM) is developed for both FEM and CFD models, and the developed model enables the assessment of optimal process parameter adjustments to accommodate line velocity changes at different product quality tolerances. The results prove that the variation of the line velocity can provide process flexibility to the industry (around ± 30 % in total electrical power for ± 20 % variation in the line velocity). Besides, a 20 % increase in line velocity results in a 5.5 % reduction in total CO2 emissions and a 5.2 % decrease in energy costs, suggesting that operating at higher line velocities is more energy efficient. The proposed strategy also analyses the potential flexibility depending on the product quality tolerance and the utility prices. The results show that increasing the allowable quality tolerance reduces the overall power consumption, with the largest potential in thermal power reduction. Beyond the analysis of one manufacturing line in operation, flexibility can be achieved by adequately scheduling several profiles with different electrical-to-thermal power ratios. In addition, a convenient redesign of profiles can also be used, as profiles with thinner walls and less rubber allow more flexibility, although they consume more electricity in the extruder.