Skip to main content

DESARROLLO DE NUEVAS TECNOLOGIAS DE RECUPERACIÓN, PURIFICACIÓN Y LICUEFACCIÓN DE HELIO ADAPTADAS A HOSPITALES, EMPRESAS Y CENTROS DE INVESTIGACIÓN

IPT-2012-0442-420000

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Cooperación Público-Privada
Subprogram Subprograma INNPACTO
Call INNPACTO
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre INTEGRACION Y CONTROL

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Purification of recovered helium with low level of impurities: evaluation of two different methods

  • Lozano Bernal, María Pilar
  • Gabal Lanau, Miguel
  • Sesé Monclús, Javier
  • Pina Iritia, Maria Pilar
  • Rillo Millan, Conrado
Helium gas coming from low temperature experimental systems is recovered to avoid losses of this scarce gas on Earth. Once this helium gas has been recovered and before its liquefaction, the impurities contained should be removed. It is possible to achieve a low level of impurities by using the proper materials and procedures on the road to helium recovery. A comparison of two different methods applied for the purification of recovered helium with low level of impurities is reported in this paper. One method is the use of liquid nitrogen traps and the other one is the application of a purification system based on getter materials. The cleaning efficiency has been probed experimentally for both methods through the analysis of the purified He gas. The evaluation covers the life time between regenerations, the everyday care as well as the long term, the energy consumption, the initial investment besides the cost of maintenance of both methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Helium contamination through polymeric walls

  • Gabal Lanau, Miguel
  • Lozano Bernal, Maria Pilar
  • Oca, Arancha
  • Pina Iritia, Maria Pilar
  • Sesé Monclús, Javier
  • Rillo Millán, Conrado
The concentration of impurities in helium gas is an important parameter for a recovery and liquefaction plant. A low level of impurities is necessary to maintain an optimum liquefaction rate in any kind of liquefier. The main origin of the impurities is the air contamination that enters into the helium mainstream at some point in the recovery cycle. In this work we have: i) identified the main sources for impurities in an experimental helium recovery plant, ii) quantified the contamination rate and iii) proposed a mitigation strategy. An analysis of the He impurities composition reveals a nitrogen/oxygen ratio different to the one existing in air. This observation is in accordance with the permeability values for nitrogen and oxygen through the polymer materials used in the plant. Experimental on line measurements for oxygen content in the He mainstream with sensitivity below 1 ppm, have been performed after recirculation through metal and polymeric pipelines, respectively, to validate our hypothesis. In addition, the dependence of the impurities concentration with the He retention time in the recovery gas bag has been evaluated. Finally some operational recommendations are given for practical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancement of the Liquefaction Rate in Small-Scale Helium Liquefiers Working Near and Above the Critical Point

  • Rillo, Conrado
  • Gabal, Miguel
  • Lozano Bernal, María Pilar
  • Sesé, Javier
  • Spagna, Stefano
  • Diederichs, Jost
  • Sager, Ronald
  • Chialvo, Cesar
  • Terry, Jeremy
  • Rayner, Grant
  • Warburton, Richard
  • Reineman, Richard
Low-temperature research laboratories with typical liquid-helium consumption of the order of tens of liters per day have greatly benefited from the recent development of small-scale liquefiers. In general, these liquefiers are based on Gifford-McMahon or pulse-tube closed-cycle refrigerators with a nominal cooling power ranging from 1 to 1.5Wat 4.2 K. The liquefaction rate for these cryocooler-based liquefiers depends on the pressure at which the helium is liquefied, although the final user conditions of the produced liquid helium are always atmospheric pressure and boiling temperature (e.g., 4.2 K at 100 kPa). Here, we show a systematic study on this effect, in which an enhancement in excess of 70% in liquefaction rate is found experimentally for pressures near and above the critical point of helium (220 kPa). We propose that the underlying mechanism for the liquefaction enhancement is based on the increase in cryocooler cooling power with temperature and the decrease of the helium enthalpy with pressure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hydrogen-free liquid-helium recovery plants: the solution for low-temperature flow impedance blocking

  • Gabal Lanau, Miguel
  • Arauzo García, Ana Belén
  • Camón Lasheras, Agustin Hispanico
  • Castrillo, Marta
  • Guerrero Domínguez, Enrique
  • Lozano, María Pilar
  • Pina Iritia, María Pilar
  • Sesé Monclús, Javier
  • Spagna, Stefano
  • Diederichs, Jost
  • Rayner, Grant
  • Sloan, Jeff
  • Galli, Federica
  • van der Geest, Wilfred
  • Haberstroh, Christoph
  • Dittmar, Nico
  • Oca, Arancha
  • Grau, Fernando
  • Fernandes, Adelino
  • Rillo Millan, Conrado Miguel
The blocking of fine-capillary tubes used as flow impedances in He4 evaporation cryostats to achieve temperatures below 4.2 K is generally attributed to nitrogen or air impurities entering these tubes from the main bath. The failure of even the most rigorous low-temperature laboratory best practices aimed at eliminating the problem by maintaining the cleanliness of the helium bath and preventing impurities from entering the capillary tubes suggests that a different cause is responsible for the inexplicable reduction of impedance flow. Many low-temperature research laboratories around the world have suffered this nuisance at a considerable financial cost due to the fact that the affected systems have to be warmed to room temperature in order to recover their normal low-temperature operation performance. Here, we propose an underlying physical mechanism responsible for the blockages based upon the freezing of molecular H2 traces present in the liquid-helium bath. Solid H2 accumulates at the impedance low-pressure side, and, after some time, it produces a total impedance blockage. The presence of H2 traces is unavoidable due its occurrence in the natural gas wells where helium is harvested, forcing gas suppliers to specify a lower bound for impurity levels at about 100 ppb even in high-grade helium. In this paper, we present a simple apparatus to detect hydrogen traces present in liquid helium and easily check the quality of the liquid. Finally, we propose a solution to eliminate the hydrogen impurities in small- and large-scale helium recovery plants. The solution has been implemented in several laboratories that previously experienced a chronic occurrence of blocking, eliminating similar occurrences for more than one year.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hydrogen-Free Liquid-Helium Recovery Plants: The Solution for Low-Temperature Flow Impedance Blocking

  • Gabal, M.
  • Arauzo, A.
  • Camón, A.
  • Castrillo, M.
  • Guerrero, E.
  • Lozano, M.P.
  • Pina, M.P.
  • Sesé, J.
  • Spagna, S.
  • Diederichs, J.
  • Rayner, G.
  • Sloan, J.
  • Galli, F.
  • Van, Der Geest
  • Haberstroh, C.
  • Dittmar, N.
  • Oca, A.
  • Grau, F.
  • Fernandes, A.
  • Rillo, C.
The blocking of fine-capillary tubes used as flow impedances in He4 evaporation cryostats to achieve temperatures below 4.2 K is generally attributed to nitrogen or air impurities entering these tubes from the main bath. The failure of even the most rigorous low-temperature laboratory best practices aimed at eliminating the problem by maintaining the cleanliness of the helium bath and preventing impurities from entering the capillary tubes suggests that a different cause is responsible for the inexplicable reduction of impedance flow. Many low-temperature research laboratories around the world have suffered this nuisance at a considerable financial cost due to the fact that the affected systems have to be warmed to room temperature in order to recover their normal low-temperature operation performance. Here, we propose an underlying physical mechanism responsible for the blockages based upon the freezing of molecular H2 traces present in the liquid-helium bath. Solid H2 accumulates at the impedance low-pressure side, and, after some time, it produces a total impedance blockage. The presence of H2 traces is unavoidable due its occurrence in the natural gas wells where helium is harvested, forcing gas suppliers to specify a lower bound for impurity levels at about 100 ppb even in high-grade helium. In this paper, we present a simple apparatus to detect hydrogen traces present in liquid helium and easily check the quality of the liquid. Finally, we propose a solution to eliminate the hydrogen impurities in small- and large-scale helium recovery plants. The solution has been implemented in several laboratories that previously experienced a chronic occurrence of blocking, eliminating similar occurrences for more than one year.