Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Inverse modeling of pan heating in domestic cookers

  • Sanz-Serrano, F.
  • Sagues, C.
  • Llorente, S.
The heating uniformity of the cooking vessels in domestic stoves depends on the type of heat source (induction, electric resistance, gas burner, etc.) and of the way in which the power is transferred to the pan. The evaluation of the stove functionalities is currently carried out by the manufacturers with costly experimental tests with real food, which are an important phase of the design process for the improvement of their performance in the food elaboration. In order to help to design the cookers and avoid the expensive tests, it is interesting to know how the heating power is distributed in each situation, so that the cookers can be adapted to obtain a more uniform heating. The contribution of this work is an inverse thermal model for the three aforementioned technologies of domestic cookers, which allows the calculation of the power distribution generated in the bottom of the pan from the measurement of the surface temperature. The results show that the proposed inverse model is of interest in many practical situations and can be used under diverse conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dynamic heat and mass transfer model of an electric oven for energy analysis

  • Ramirez-Laboreo, E.
  • Sagues, C.
  • Llorente, S.
In this paper, a new heat and mass transfer model for an electric oven and the load placed inside is presented. The developed model is based on a linear lumped parameter structure that differentiates the main components of the appliance and the load, therefore reproducing the thermal dynamics of several elements of the system including the heaters or the interior of the product. Besides, an expression to estimate the water evaporation rate of the thermal load has been developed and integrated in the model so that heat and mass transfer phenomena are made interdependent. Simulations and experiments have been carried out for different cooking methods, and the subsequent energy results, including energy and power time-dependent distributions, are presented. The very low computational needs of the model make it ideal for optimization processes involving a high number of simulations. This feature, together with the energy information also provided by the model, will permit the design of new ovens and control algorithms that may outperform the present ones in terms of energy efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Human-computer interaction based on hand gestures using RGB-D sensors

  • Palacios, J.M.
  • Sagués, C.
  • Montijano, E.
  • Llorente, S.
In this paper we present a new method for hand gesture recognition based on an RGB-D sensor. The proposed approach takes advantage of depth information to cope with the most common problems of traditional video-based hand segmentation methods: cluttered backgrounds and occlusions. The algorithm also uses colour and semantic information to accurately identify any number of hands present in the image. Ten different static hand gestures are recognised, including all different combinations of spread fingers. Additionally, movements of an open hand are followed and 6 dynamic gestures are identified. The main advantage of our approach is the freedom of the user’s hands to be at any position of the image without the need of wearing any specific clothing or additional devices. Besides, the whole method can be executed without any initial training or calibration. Experiments carried out with different users and in different environments prove the accuracy and robustness of the method which, additionally, can be run in real-time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Infrared sensor-based temperature control for domestic induction cooktops

  • Lasobras, J.
  • Alonso, R.
  • Carretero, C.
  • Carretero, E.
  • Imaz, E.
In this paper, a precise real-time temperature control system based on infrared (IR) thermometry for domestic induction cooking is presented. The temperature in the vessel constitutes the control variable of the closed-loop power control system implemented in a commercial induction cooker. A proportional-integral controller is applied to establish the output power level in order to reach the target temperature. An optical system and a signal conditioning circuit have been implemented. For the signal processing a microprocessor with 12-bit ADC and a sampling rate of 1 Ksps has been used. The analysis of the contributions to the infrared radiation permits the definition of a procedure to estimate the temperature of the vessel with a maximum temperature error of 5 °C in the range between 60 and 250 °C for a known cookware emissivity. A simple and necessary calibration procedure with a black-body sample is presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A new model of electromechanical relays for predicting the motion and electromagnetic dynamics

  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
  • Llorente, Sergio
In this paper, a novel multiphysics and nonlinear model for electromechanical relays is presented. The electromagnetic dynamics is analyzed by calculating the total reluctance of the magnetic equivalent circuit (MEC), which is composed of a fixed length iron core and an angular air gap. Magnetic saturation and angular dependency of the reluctance are considered in the analysis. Then, an energy balance over the electromagnetic components of the system is used to obtain the torque which drives the movable armature. A planar mechanism of four rigid bodies, including spring-damping torques that restrict the motion and model the contact bounces that occur in the switchings, is proposed to explain the dynamics of the movable components. Experimental tests show the accuracy of the model in both the electromagnetic and the mechanical parts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Induction heating appliance with a mobile double-coil inductor

  • Sanz, Fernando
  • Sagüés, Carlos
  • Llorente, Sergio
An induction heating appliance designed to uniformly heat up metallic plates is studied in this paper. It consists of one planar inductor with two concentric coils attached to a mechanism, which allows moving the inductor under the plate while heating. This system is a possible solution for the growing concept of flexible induction cooking hobs, improving their performance in flexibility and in thermal distribution in the pans. With different combinations of motion and the selective activation of the inductor coils, any pan can be uniformly heated regardless its size or position on the hob. In this paper, we develop a thermal model to analyze the temperature distribution obtained in the pans for each diameter and strategy used. The model is solved using finite differences, and it is validated with experimental measurements. From the calculations, the best strategy for each pan diameter is obtained.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Life cycle assessment of a domestic induction hob: Electronic boards

  • Elduque, D.
  • Javierre, C.
  • Pina, C.
  • Martínez, E.
  • Jiménez, E.
This study analyzes the environmental performance of the electronic boards used in the current generation of induction hob designed and assembled in Spain. A Life Cycle Assessment (LCA) has been performed, defining the functional unit as the electronic boards used in an induction cooktop with 4 hobs and 7.2 kW of nominal power. The electronic boards are two power electronic boards (ELIN PCBAs -Printed Circuit Board Assembly-), and one touch control electronic board (Touch Control PCBA). Each one has been thoroughly analysed having into account every electronic component. The software used to create the LCA model was SimaPro 7.3.3, using two databases Ecoinvent v2.2 and Chalmers CPM LCA Database. The most relevant environmental impact in every category is caused by the two ELIN PCBAs. Touch Control PCBA has significant impact in Ozone Layer Depletion, although its value is four times lower than the emissions of one ELIN PCBA. Both ELIN PCBAs show similar environmental impact distribution. Components create between 70 and 85% of the total impact in most categories. Touch Control PCBA has a different environmental impact distribution from both ELIN PCBA. This analysis of the environmental impact of the ELIN PCBAs and the Touch Control PCBA used in an induction hob has revealed that there are several clear areas for improvement, such as reducing the environmental impact of the components and improving its end-of-life treatment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of mechanical design on the evolution of the environmental impact of an induction hob

  • Pina, Carmelo
  • Elduque, Daniel
  • Javierre, Carlos
  • Martínez, Eduardo
  • Jiménez, Emilio
Purpose: This paper studies the influence of the mechanical design of five different induction hob generations (G1 to G5), which are currently installed in several million homes, on the evolution of their environmental impact. Methods: Life cycle assessment (LCA) has been applied using SimaPro 8.0.3.14 and EcoInvent v2.2 database. Samples of each design were obtained to generate a life cycle inventory. These induction hobs have been developed and produced in Zaragoza (Spain). The functional unit has been defined as all of the components influenced by the mechanical design of a cooktop with four induction hobs and a width of 60 cm, including every component except the electronic boards and the use phase, as they are not affected by the mechanical design. The limits of the LCA model include the production of the raw materials and energy, the manufacture and production processes, the distribution, and the end of life. Results and discussion: This study has revealed that the differences in mechanical design highly affect the environmental impact, especially in the environmental categories of abiotic depletion and human toxicity due to the consumption of copper, steel, and plastics. The manufacturing phase highly affects human toxicity, mainly due to the variation in PPS use. There is a decreasing tendency in the environmental impact from the first (G1) to the last generation (G5), as G5 causes the lowest burden in 8 out of 11 analysed categories. The different generations analysed in this paper show that the compact designs of induction hobs help to decrease the environmental impact, especially thanks to the reduction in wiring lengths. It is also important to enhance the wiring separation at the end-of-life phase, avoiding designs that hinder recycling processes. Conclusions: Compact designs and reduced wiring lengths help to reduce the environmental impact. The consumption of copper, steel, aluminium, and polymers creates considerable impact, although the end-of-life phase reduces the burden created by metals, thanks to recycling. Manufacturing processes such as injection moulding also produce a noteworthy impact, especially in ozone layer depletion due to the inclusion of solvents in EcoInvent’s injection moulding dataset. The impact caused by the distribution phase for this product is almost negligible in most categories.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermal modeling, analysis and control using an electrical analogy

  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
  • Llorente, Sergio
Modeling and identification of thermal systems is a problem frequently treated in theoretical and application domains. Most of these systems have been modeled using black-box structures whose parameters are identified using temperature measurements. Although black-box models have achieved good results in terms of temperature evolution, they cannot model variables which had not been measured in the identification test. In this article we present a new method to build grey-box thermal models based on electrical equivalent circuits which not only give information about temperatures evolution, but also about heat fluxes and thermal energy stored in the system. The partially unknown parameters of the models are identified using temperature measurements and applying nonlinear optimization techniques. The obtained state space representation can be used to develop a deterministic state space temperature controller that provides better accuracy than classical PID controllers. Our proposal is complemented with various examples of a real application in an electric oven.