Skip to main content

DEVELOPMENT OF OPTICAL FIBER LASERS FOR RADIO ON FIBER PROCESSING

JCI-2009-05805

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Contratación e Incorporación de RRHH
Subprogram Subprograma Juan de la Cierva (JDC)
Call Juan de la Cierva Incorporación
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Formación e Incorporación de Investigadores
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phase and Amplitude Stability of EHF-Band Radar Carriers Generated From an Active Mode-Locked Laser

  • Serafino, Giovanni
  • Ghelfi, Paolo
  • Pérez Millán, Pedro
  • Villanueva Ibáñez, Guillermo Eduardo
  • Palací López, Jesús
  • Cruz, Jose Luis
  • Bogoni, Antonella
[EN] We study the phase and amplitude stability of RF signals, generated at different frequencies by heterodyning pairs of modes from the optical spectrum of an active mode-locked laser, and we focus on the dependence of noise on the RF frequency. A specific theoretical model is derived, and the amplitude and timing jitter behaviour of the RF signals are analyzed and experimentally validated. The timing jitter reveals to be constant at any RF generated frequency, making the considered RF generation method suitable for the realization of flexible and highly stable micro-and millimeter-wave coherent radar transceivers. The performance of the considered RF generation architecture are compared with a state-of-the-art RF synthesizer, proving that the optically generated RF signals meet the high stability requirements of the new generation of coherent radar systems, even at extremely high frequencies (EHF)., Manuscript received May 17, 2011; revised September 27, 2011; accepted September 27, 2011. Date of publication October 06, 2011; date of current version November 25, 2011. This work has been supported in part by the EU projects PHODIR and EURO-FOS. The work of G. E. Villanueva and J. Palaci has been supported by the MEC-FPU and UPV-FPI programs. The work of P. Perez-Millan has been supported by the Juan de la Cierva program, JCI-2009-05805. The work of J. L. Cruz was supported in part by the Ministerio de Ciencia e Innovacion of Spain under Grant TEC2008-05490.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tunable photonic microwave filter with single bandpass based on a phase-shifted Fiber Bragg Grating

  • Palací López, Jesús
  • Pérez Millán, Pedro
  • Villanueva Ibáñez, Guillermo Eduardo
  • Cruz, José L.
  • Andrés, Miguel V.
  • Martí Sendra, Javier
  • Vidal, Borja|||0000-0002-0942-3259
A novel tunable photonic microwave single bandpass filter based on the optical resonance originated by a local phase shift introduced in the periodic structure of a fiber Bragg grating is proposed. Dynamic control of the phase shift is obtained employing a piezoelectric transducer in order to stretch the grating, thus changing the resonance wavelength. A photonic microwave filter is obtained by using an optical single-sideb and modulation. Experimental results are provided in order to prove the concept., This work was supported by the Spanish Ministerio de Ciencia e Innovacion TEC2009-08078 and TEC2008-05490 Projects. The work of J. Palaci and G. E. Villanueva was supported by the UPV-FPI and MEC-FPU Programs. The work of P. Perez-Millan was supported by the Juan de la Cierva program, JCI-2009-05805.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High frequency microwave signal generation using dual-wavelength emission of cascaded DFB fiber lasers with wavelength spacing tunability

  • Villanueva Ibáñez, Guillermo Eduardo
  • Palací López, Jesús
  • Cruz, José L.
  • Andrés, Miguel V.
  • Pérez Millán, Pedro
  • Martí Sendra, Javier
[EN] A dual wavelength fiber laser source based on two cascaded phase-shifted fiber Bragg gratings is presented The gratings are written in an erbium-doped fiber each configuring the cavity of a distributed feedback fiber laser The spacing between lasing modes is controlled dynamically by the use of piezoelectric actuators A continuous tuning range of 5-724 pm of the wavelength difference which is equivalent to a photodetected 072-92 GHz range is obtained Efficient generation from the L to the W microwave and millimeter bands has been achieved by heterodyne photodetection of the dual-wavelength optical signal (C) 2010 Elsevier BV All rights reserved, This work has been financially supported by the European Commission under the FP7 EURO-FOS NoE (ICT-2007-2-224402) and the Spanish Ministerio de Educacion y Ciencia TEC2008-05490 and TEC2009-08078 projects The work of G E Villanueva and J Palaci was supported by the MEC-FPU and UPV-FPI programs The work of P Perez-Millan was supported by the Juan de la Cierva program JCI-2009-05805
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Real-Time and Low-Cost Sensing Technique Based on Photonic Bandgap Structures

  • García Castelló, Javier
  • Toccafondo, Veronica
  • Pérez Millán, Pedro
  • Sánchez Losilla, Nuria
  • Cruz, J. L.
  • Andres, M. V.
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A technique for the development of low-cost and high-sensitivity photonic biosensing devices is proposed and experimentally demonstrated. In this technique, a photonic bandgap structure is used as transducer, but its readout is performed by simply using a broadband source, an optical filter, and a power meter, without the need of obtaining the transmission spectrum of the structure; thus, a really low-cost system and real-time results are achieved. Experimental results show that it is possible to detect very low refractive index variations, achieving a detection limit below 2 x 10(-6) refractive index units using this low-cost measuring technique. (C) 2011 Optical Society of America[, This work was funded by the Spanish Ministerio de Ciencia e Innovacion (MICINN) under contracts TEC2008-06333, JCI-009-5805, and TEC2008-05490. Support by the Universidad Politecnica de Valencia through program PAID-06-09 and the Conselleria d'Educacio through program GV-2010-031 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Active and Passive Mode-Locked Fiber Lasers for High-Speed High-Resolution Photonic Analog-to-Digital Conversion

  • Villanueva Ibáñez, Guillermo Eduardo
  • Ferri Pardo, María
  • Pérez Millán, Pedro
[EN] We present a complete set of mode-locked fiber lasers designed for photonic analog-to-digital conversion. Design, simulation, fabrication, and characterization of Er-doped fiber lasers are carried out through optimizing their performance to suit the requirements of high-speed and high-resolution photonic-assisted analog-to-digital converters. The required properties are achieved by active mode-locking on the basis of amplitude modulation of the cavity losses through a Mach-Zehnder modulator, and passive mode-locking on the basis of fast semiconductor saturable absorbers and intracavity polarizing fibers. The use of an intracavity polarizing fiber in combination with a fast saturable absorber allows dynamic control of the operation regimes through polarization control. Besides these oscillators designed with ring cavity structure, a short linear cavity with fundamental repetition frequency at the order of 1 GHz is studied, and an effective continuous tunability of the repetition frequency is obtained by an electromechanical transducer. Pulsed repetition rates up to 20 GHz, pulsewidths down to 500 fs, and time jitters below 180 fs are obtained. Fiber lasers based on standard and commercially available telecom devices are demonstrated to be a low-cost, compact, and versatile optical source for photonic-assisted analog-to-digital conversion. ©2012 IEEE., This work was supported in part by the European Commission under the FP7 EURO-FOS NoE (ICT-2007-2-224402) and the Ministerio de Industria, Turismo y Comercio under AVANZA project FIRMA (TSI-020302-2009-38) and under Plan Nacional I+D+I project ULTRADEF (TEC2009-14250). The work of Guillermo E. Villanueva was supported in part by the MEC-FPU Program. The work of P. Perez-Millan was supported in part by the Juan de la Cierva Program JCI-2009-05805.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic control of the operation regimes of a mode-locked fiber laser based on intracavity polarizing fibers: experimental and theoretical validation

  • Villanueva Ibáñez, Guillermo Eduardo
  • Pérez Millán, Pedro
[EN] An intracavity polarizing fiber is proposed to control the emission regime of a passively mode-locked fiber laser. Stable operation in self-starting high and low dispersion soliton mode-locking and 100 GHz multiwavelength regimes is demonstrated through numerical simulations and experimental validation. Mode-locking stability is ensured by a saturable absorber in the ring cavity. The effective selection of operation regime is dynamically carried out by controlling the intracavity polarization state., This work was financially supported by the EuropeanCommission under the FP7 EURO-FOS NoE (ICT-2007-2-224402). The work of G. E. Villanueva was supported by the MEC-FPU programs. The work of P. Pérez-Millán was supported by the Juan de la Cierva program, JCI-2009-05805.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Linear and nonlinear optical properties of carbon nanotube-coated single-mode optical fiber gratings

  • Villanueva Ibáñez, Guillermo Eduardo
  • Jakubinek, M.B.
  • Simard, B.
  • Oton Nieto, Claudio José
  • Matres Abril, Joaquín
  • Shao, L.Y.
  • Pérez Millán, Pedro
  • Albert, J.
[EN] Single-wall carbon nanotube deposition on the cladding of optical fibers has been carried out to fabricate an all-fiber nonlinear device. Two different nanotube deposition techniques were studied. The first consisted of repeatedly immersing the optical fiber into a nanotube supension, increasing the thickness of the coating in each step. The second deposition involved wrapping a thin film of nanotubes around the optical fiber. For both cases, interaction of transmitted light through the fiber core with the external coating was assisted by the cladding mode resonances of a tilted fiber Bragg grating. Ultrafast nonlinear effects of the nanotube-coated fiber were measured by means of a pump-probe pulses experiment. © 2011 Optical Society of America., This work was financially supported by the European Commission under the FP7 EURO-FOS Network of Excellence (ICT-2007-2-224402), the Ministerio de Educación y Ciencia SINADEC project (TEC2008-06333), and the Natural Sciences and Engineering Research Council of Canada (NSERC). The work of G. E. Villanueva was supported by the Ministerio de Educación y Ciencia Formación de Profesorado Universitario programs. The work of P. Pérez-Millán was supported by the Juan de la Cierva program, JCI-2009-05805.