Skip to main content

-

JCI-2012-14521

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Contratación e Incorporación de RRHH
Subprogram Subprograma Juan de la Cierva (JDC)
Call Juan de la Cierva Incorporación
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting

  • Moure, A.
  • Izquierdo Rodríguez, M.A.
  • Hernández Rueda, S.
  • Gonzalo Martín, Alicia
  • Rubio-Marcos, F.
  • Urquiza Cuadros, D.
  • Pérez-Lepe, A.
  • Fernandes, J.F.
Piezoelectric cymbals with 29-mm diameter and different configurations are fabricated and tested to determine the best conditions to optimize the conversion of mechanical to electric energy. Then, the ones with the best results are integrated directly in asphalt to evaluate their performance as vibration energy harvesters in roads, in a test bench designed to characterize these parameters. The main cymbal parameters and their integration in the asphalt are determined. For the first time, the electrical energy that can be obtained with the embedment of cymbals in asphalt is evaluated. Each single piezoceramic cymbal recovers up to 16 mu W for the pass of one heavy vehicle wheel. An extrapolation of the energy transformed by the integrated cymbals in roads with high vehicle densities, such as in a peri-urban motorway, is approached. Energy densities in the range of 40-50 MW h/m(2) can be obtained at 100 m of road (use of 30,000 cymbals), which could account for more than 65 MW h in a year. All this with a relatively low cost for an emerging technology (less than 2 (sic)/kW h). The conversion of wasted and unused vibrational energy in roads by piezoelectric cymbals is thus proved as a real possibility of energy harvesting., The authors are grateful to MINECO Project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr. F. Rubio-Marcos is also indebted to MINECO for a “Juan de la Cierva” contract (Ref. JCI-2012-14521), which is co-financed with European Social Fund. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013-14436), which is co-financed with European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long lasting phosphors: SrAl2O4:Eu, Dy as the most studied material

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Rodríguez Barbero, Miguel Ángel
  • Fernández Lozano, José Francisco
The aim of this review is to present the progress in preparing phosphorescent particles based on the reported research. We highlight the recent progress on SrAl2O4: Eu, Dy particles by describing the advantages and disadvantages of the different synthesis methods. This long-lasting material combines several favorable attributes: is stable, efficient, and less toxic that their predecessors. For that, large attention has been paid to the development of an efficient preparation method of SrAl2O4 doped powders, including sol-gel method, hydrothermal synthesis, laser synthesis, combustion synthesis and solid state reaction. However, many of these techniques are not compatible with large-scale production and with the principles of sustainability. Industrial processing of highly crystalline powders usually requires high synthesis temperatures, typically between 1300 and 1900 °C, with long processing times, especially for solid state reaction. As a result, the average particle size is typically within the 20–100 μm range. This large particle size is limiting for current applications that demand sub-micron particles. The microstructure and size which are controlled through adjusting the experimental conditions have a great influence in the final photoluminescence response. Therefore, much effort has been devoted to exploring new strategies to obtain sub–micrometric particles, avoiding stringent, intricate, tedious, costly, or inefficient preparation steps and intrinsic toxicity or elemental scarcity. Moreover, persistent luminescent nanomaterials have attracted great interest to their potential application in solar cells, biological labeling and imaging and security encode. In addition, we describe the challenges and future of phosphorescent materials in regard to their synthesis, properties and applications. Finally, some further suggestions have been also addressed to enhance its photoluminescence response from the perspective of the synthesis. We believe that such a review can accelerate the developments of SrAl2O4-based materials., MINECO (Spain) project; MAT2013-480089-C04-1-P for their financial support. Dr. F. Rubio Marcos is also indebted to MINECO for a ‘‘Juan de la Cierva’’ contract (ref: JCI-2012-14521),, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy product enhancement in imperfectly exchange-coupled nanocomposite magnets

  • Quesada, Adrián
  • Granados-Miralles, Cecilia
  • López-Ortega, Alberto
  • Erokhin, Sergey
  • Lottini, Elisabetta
  • Pedrosa, Javier
  • Bollero, Alberto
  • Aragón Sánchez, Ana María
  • Rubio Marcos, Fernando
  • Stingaciu, Marian
  • Bertoni, Giovanni
  • Julián Fernández, César de
  • Sangregorio, Claudio
  • Fernández Lozano, José Francisco
  • Berkov, Dmitry
  • Christensen, Mogens
[EN] Interfacial exchange coupling is known to improve the permanent magnetic performance (i.e., maximal energy product) in composites of magnetically hard and soft particles. The prevailing strategy, employed in a plethora of compositions, consists in maximizing the coupling between the hard and soft phases and optimizing material parameters such as particle size or phase composition. In CoFeO–FeCo nanocomposites, it is experimentally shown that interparticle uncoupling in combination with the sizes of the soft phase grains below the single-domain threshold leads to enhanced magnetic properties at room temperature, while maximizing exchange coupling implies a collapse in coercivity and hence in the maximal energy product. The results are corroborated by micromagnetic calculations and the origin of the exchange-induced softening is discussed. It is emphasized that engineering interfaces in order to optimize, rather than maximize, the degree of exchange coupling are a necessary requirement to improve the energy product in nanocomposite magnets and to successfully develop advanced rare-earth-free permanent magnets., Financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516), and from the Spanish Ministerio de Economía y Competitividad through Project MAT2013-48009-C4-1-P. F.R.M. is also indebted to MINECO for a ‘‘Juan de la Cierva’’ contract (ref: JCI-2012-14521), which is co-financed with European Social Found.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ferroelectric domain wall motion induced by polarized light

  • Rubio Marcos, Fernando
  • Campo, Ángel Adolfo del
  • Marchet, Pascal
  • Fernández Lozano, José Francisco
Ferroelectric materials exhibit spontaneous and stable polarization, which can usually be reoriented by an applied external electric field. The electrically switchable nature of this polarization is at the core of various ferroelectric devices. The motion of the associated domain walls provides the basis for ferroelectric memory, in which the storage of data bits is achieved by driving domain walls that separate regions with different polarization directions. Here we show the surprising ability to move ferroelectric domain walls of a BaTiO₃ single crystal by varying the polarization angle of a coherent light source. This unexpected coupling between polarized light and ferroelectric polarization modifies the stress induced in the BaTiO₃ at the domain wall, which is observed using in situ confocal Raman spectroscopy. This effect potentially leads to the non-contact remote control of ferroelectric domain walls by light., We thank the MINECO (Spain) project MAT2013-48009-C4-1-P for their financial support. F.R.M. is also indebted to MINECO for a ‘Juan de la Cierva’ contract (ref: JCI-2012-14521), which is co-financed with FEDER funds. We acknowledge Dr Adrian Quesada for scientific and technical advice., Peer reviewed