Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bragg Gratings Inscription in TS-Doped PMMA POF by Using 248-nm KrF Pulses

  • Min, Rui
  • Hu, Xuehao
  • Broadway, Christian
  • Caucheteur, Christophe
  • Pun, Chi-Fung Jeff
  • Tam, Hwa-Yaw
  • Antunes, Paulo
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate the Bragg gratings inscription in the 850-nm spectral region by using trans-4-stilbenemethanol-doped poly methyl methacrylate step-index optical fiber and a 248-nm krypton fluoride (KrF) excimer laser system. The gratings inscription only takes 0.4 s. A detailed study of the grating fabrication process using different pulse repetition rates is also reported. In addition, temperature, humidity, and strain sensitivities are measured to demonstrate the potentiality of these components for different sensing applications., The research leading to these results has received funding from the Fundacao para a Ciencia e Tecnologia (FCT)/MEC national funds and when applicable co-funded by FEDER-PT2020 Partnership Agreement under Project UID/EEA/50008/2013. This work was also supported in part by the Research Excellence Award Programme GVA Prometeo 2017/103 Future Microwave Photonics Technologies and Applications, and in part by the Fundamental Research Funds for the Heilongjiang Provincial Universities under Grant KJCXZD201703. The work of C. Marques was supported by FCT through the Fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bragg Grating Inscription With Low Pulse Energy in Doped Microstructured Polymer Optical Fibers

  • Min, Rui
  • Nielsen, K.
  • Bang, Ole
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate that fiber Bragg gratings (FBGs) can be written in a doped polymer optical fiber (POF) in a low ultraviolet (UV) pulse energy regime (60 ¿J/pulse) using a 248-nm krypton fluoride excimer laser system. The total energy density per inscription necessary to obtain Bragg gratings is between 493.6 and 3825 mJ/cm2, depending on the number of pulses and the pulse energy. The impact of the pulse energy on the growth of the Bragg grating is investigated, and it is shown that the 248-nm light induces a positive refractive index change. This article demonstrates that the FBGs can be obtained in the POFs without high pulse energy (mJ level) at 248-nm wavelength, which reduces maintenance costs. Furthermore, we can consider it as a solution to increase the lifetime of the laser system without high energy still allowing fast and efficient production of the FBGs for sensing applications., This work was supported in part by the UID/EEA/50008/2013; in part by the SFRH/BPD/109458/2015; in part by the KJCXZD201703; and in part by the GVA PROMETEO2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fabrication of tunable chirped mPOF Bragg gratings using a uniform phase mask

  • Min, Rui
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate chirped Bragg gratings fabrication in doped microstructured tapered polymer fibers by using a uniform phase mask. The use of high photosensitive benzyl dimethyl ketal (BDK) doped core fiber allows to obtain chirped Bragg gratings by means of a single krypton fluoride laser pulse. The stability of the gratings has been confirmed and the strain and temperature sensitivity measurements demonstrate their tunable properties. Finally, different tapered profiles have been implemented in order to show the potentiality of this fabrication technique in polymer optical fibers. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., This work was supported by Fundação para a Ciência e Tecnologia (FCT)/MEC through national funds and when applicable co-funded by FEDER PT2020 partnership agreement under the project UID/EEA/50008/2013. C. A. F. Marques also acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015. The authors also acknowledge the Research Excellence Award Programme GVA PROMETEO 2017/103 FUTURE MICROWAVE PHOTONIC TECHNOLOGIES AND APPLICATIONS and Fundamental Research Funds for the Heilongjiang Provincial Universities (KJCXZD201703).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast inscription of long period gratings in microstructured polymer optical fibers

  • Min, Rui
  • Marques, Carlos
  • Nielsen, K.
  • Bang, Ole
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate 20 dB long period grating (LPG) fast inscription in microstructured polymer optical fibers (mPOFs) using a point-by-point technique obtaining an LPG total length of 25 mm. Two 248 nm UV laser pulses of 15 ns duration have been employed for every inscription point, which means a time reduction by over 21 times compared with the fastest inscription time already reported in literature. The device has been fabricated in a single-mode mPOF with a core that has been doped with benzyl dimethyl ketal for photosensitivity enhancement. Moreover, we characterize the strain and temperature responses and the stability of the fabricated gratings response under different conditions in order to assess the viability for different applications., This work was supported in part by the Fundacao para a Ciencia e Tecnologia/MEC through national funds, in part by FEDER-PT2020 partnership agreement under the Projects UID/EEA/50008/2013, in part by the Research Excellence Award Programme GVA PROMETEO 2017/103 Future Microwave Photonic Technologies and Applications and Fundamental Research Funds for the Heilongjiang Provincial Universities under Grant KJCXZD201703. The work of C. Marques was supported by the FCT through the Fellowship under Grant SFRH/BPD/109458/2015.