Skip to main content

SINTESIS, CARACTERIZACION Y PROCESADO DE MATERIALES PARA BATERIAS Y PILAS DE COMBUSTIBLE

MAT2010-19837-C06-05

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD CARLOS III DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vanadium oxide supported on porous clay heterostructure for the partial oxidation of hydrogen sulphide to sulfur

  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Cecilia, J. A.
  • Natoli, A.
  • Jimenez-Jimenez, J.
  • Rodriguez Castellon, Enrique
Vanadium oxide supported on porous clay heterostructures (PCH) catalysts have been synthesized, characterized and evaluated in the selective oxidation of H2S to elemental sulfur. The catalysts were characterized by XRD, adsorption-desorption of N-2 at -196 degrees C, diffuse reflectance UV-vis, H-2-TPR, Raman spectroscopy and XPS. The catalysts with higher vanadium content are more active and selective, exhibiting a H2S conversion close to 70% after 360h on stream with a high selectivity toward elemental sulfur and a low formation of undesired SO2. The catalysts with V2O5 crystallites have shown a higher activity and resistance to the deactivation. The analysis of the spent catalyst has revealed the formation of V4O9 crystals during the catalytic test, which has been reported as the active phase in the selective oxidation of the H2S. (C) 2015 Elsevier B.V. All rights reserved., The authors would like to thank the DGICYT in Spain (Projects CTQ2012-37925-C03-01, CTQ2012-37925-C03-03 and FEDER funds, and MAT2010-19837-C06-05) and project of Excellence of Junta de Andalucia (project P12-RNM-1565) for financial support. A. Natoli thanks to SECAT (Spain) for a grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation, characterization and catalytic behavior for propanepartial oxidation of Ga-promoted MoVTeO catalysts

  • Hernández Morejudo, Selene
  • Massó Ramírez, Amada
  • García-González, Esther
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Two sets of Ga-promoted MoVTeO catalysts were synthesized hydrothermally and heat-treated at 600 degrees C in N-2: (i) materials prepared from gels with Mo/V/Te/Ga atomic ratios of 1/0.60/0.17/x (x=0-0.12) (A-series) and (ii) materials prepared from gels with Mo/V/Te/Ga atomic ratios of 1/0.60-x/0.17/x (x=0.15 or 0.25) (B-series). In addition, a Ga-containing MoVTeO catalyst was also prepared from M1-containing MoVTeO material by impregnation with aqueous solution of gallium and heat-treated at 450 degrees C in N-2. Catalysts were characterized by means of powder XRD, TEM, Raman spectroscopy, NH3-TPD and XPS and tested in the partial oxidation of propane. The results showed that the addition of small amount of gallium significantly increase the selectivity to acrylic acid (AA) at low propane conversion. However, at high propane conversion, the selectivity to AA strongly depends on both the catalyst composition and the gallium incorporation method. The higher selectivity to acrylic acid over Ga-containing MoVTeO catalysts has been related to: (i) structural changes in the M1 phase by the incorporation of Ga3+ into the octahedral structural framework and/or (ii) incorporation of Ga3+ species on the catalyst surface thus modifying catalysts acid properties. (C) 2014 Elsevier B.V. All rights reserved., Financial support from DGICYT in Spain (Project CTQ2012-37925-C03-1 and Program Severo Ochoa SEV-2012-0267) is gratefully acknowledged. EGG acknowledges finantial support through spanish project MAT2010-19837-C06-05 and the ICTS-Microscopia Electronica in Madrid for facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multielement crystalline and pseudocrystalline oxides as efficient catalysts for the direct transformation of glycerol into acrylic acid

  • Chieregato, Alessandro
  • García-González, Ester
  • Puglia, Giuseppe
  • Basile, Francesco
  • Bandinelli, Claudia
  • Cavani, Fabrizio
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Glycerol surplus from biodiesel synthesis still represents a major problem in the biofuel production chain. Meanwhile, those in the acrylic acid market are looking for new processes that are able to offer viable alternatives to propylene-based production. Therefore, acrylic acid synthesis from glycerol could be an effective solution to both issues. Among the viable routes, one-pot synthesis theoretically represents the most efficient process, but it is also highly challenging from the catalyst design standpoint. A new class of complex W MoV mixed-oxide catalysts, which are strongly related to the hexagonal tungsten bronze structure, able to directly convert glycerol into acrylic acid with yields of up to 51% are reported., The authors from the Instituto Tecnologia Quimica would like to thank the Spanish Government (Project CTQ2012-37925-C03-1 and program Severo Ochoa SEV-2012-0267) for financial support. CIRI Energia e Ambiente ALMA MATER STUDIORUM, Universita di Bologna, is acknowledged for the grant to A.C. E.G.G. acknowledges financial support from the Spanish Government through the project MAT2010-19837-C06-05.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic behavior of NaV6O15 bronze for partial oxidation of hydrogen sulfide

  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Rodriguez-Castellon, E.
  • Garcia-Gonzalez, E.
[EN] Na-containing V2O5 materials have been prepared hydrothermally from gels with Na/V ratios of 0.02-0.26, and calcined at 500 degrees C. The calcined samples have been characterized and tested as catalysts in the partial oxidation of H2S to elemental sulfur. At low Na-contents, V2O5 and NaV6O15 bronze are formed, with the NaV6O15/V2O5 ratio increasing with the Na-content. Pure NaV6O15 bronze is mainly formed from gels containing a Na/V ratio of 0.18. However, NaV6O15 and Na1.164V3O8 are formed from gels with Na/V ratio higher than 0.35. NaV6O15 based catalyst shows high conversion for the oxidation of H2S with a high selectivity into elemental sulfur. These catalysts are more active and stable than pure or Na-doped V2O5 catalysts. V4O9 is observed after reaction in both pure Na-doped V2O5 catalysts but also in NaV6O15/V2O5 mixed catalysts. However, no changes in the NaV6O15 crystalline structure are observed in the Na-promoted catalysts. Accordingly, NaV6O15 crystalline phase is stable for several hours of catalysisat a difference with V2O5. The active sites in V-containing vanadium catalysts are probably V5+-O-V4+ pairs as previously proposed for V4O9 crystalline phase. The best catalytic performances were achieved on V2O5-NaV6O15 mixtures which are transformed into V4O9-NaV6O15 mixtures during the catalytic tests. These catalytic results could be due to the intrinsic physical properties of both phases but also because of the optimal dispersion obtained in the synthesis procedure. (C) 2014 Elsevier B.V. All rights reserved., The authors would like to thank the DGICYT in Spain (Projects CTQ2012-37925-C03-01, CTQ2012-37925-C03-03 and MAT2010-19837-C06-05) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Origin of the Spontaneous Formation of Nanocavities in Hexagonal Bronzes (W,V)O3

  • García-González, E.
  • Urones-Garrote, E
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Hexagonal (W,V)O3−x oxides of high thermal stability have been synthesized hydrothermally through the intermediate products Nax(W,V)O3·zH2O and (NH4)0.33−x(W,V)O3−y. The obtained crystals show nanostructured surface via the formation of a dense population of polyhedral nanocavities self-distributed along particular crystallographic directions. Nanocavities present a regular size that ranges from 5 to 10 nm in both length and width. The synthesis process involves a significant topotactic relationship between the as-synthesized product and the desired final product and this relationship is suggested as the origin of the observed surface nanostructure. The comparison of our results with observations in different solids has allowed us to suggest that the formation of nanocavities is an extensive spontaneous process when materials are obtained by the chemical reactions of solids leading to products with defined crystallographic orientation with respect to the original compound. The characterization provides evidence regarding the potential relevance of nanocavities in the functional properties of the resulting solids., Authors acknowledge the financial support from DGICYT in Spain through projects MAT2010-19837-C06-05 and CTQ2012-37925-C03-1. Authors are also grateful to the Centro de Microscopia Electronica (UCM) for facilities.