Skip to main content

NANOESTRUCTURAS TENSIONADAS PARA CINTAS SUPERCONDUCTORAS DE YBCO DE BAJO COSTE Y PRESTACIONES ELEVADAS.

MAT2011-28874-C02-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solution-derived YBa2Cu3O7 nanocomposite films with a Ba2YTaO6 secondary phase for improved superconducting properties

  • Coll, Mariona
  • Ye, Shuai
  • Rouco, Víctor
  • Palau, Anna
  • Guzmán, Roger
  • Gázquez, Jaume
  • Arbiol, Jordi
  • Suo, Hongli
  • Puig Molina, Teresa
  • Obradors, Xavier
We report on the spontaneous segregation of double perovskite Ba 2YTaO6 (BYTO) nanoparticles within YBa2Cu 3O7 (YBCO) films forming a nanocomposite with two ternary oxides by the low cost and scalable chemical solution trifluoroacetate approach. Phase orientation, nanostructural and pinning studies are carried out by 2D x-ray diffraction, advanced scanning transmission electron microscopy and transport measurements, respectively. In this complex oxide nanocomposite system (YBCO-BYTO) the majority of the nanoparticles segregated within the (00l)-oriented superconducting matrix are randomly oriented. The presence of randomly oriented nanoparticles plays a key role in the generation of localized highly strained areas within the YBCO matrix which are suggested to strongly affect the superconducting properties. The incorporation of 6-10% of BYTO resulted in a maximum pinning force, at 77 K, three times higher than that obtained for a pristine sample, while Tc was maintained at 89-90 K. © 2013 IOP Publishing Ltd., The authors would like to acknowledge the financial support of MICINN (MAT2008-01022, MAT2011-28874-C02-01), Consolider NANOSELECT (CSD2007-00041) and Generalitat de Catalunya (2009 SGR 770, NanoAraCat and Xarmae). RG and MC acknowledges grants of MICINN, VR and JG acknowledges JAE CSIC grants. SY would like to thank the National Natural Science Foundation of China (51171002) and the program of New Century Excellent Talents in University of China. The authors thank Dr C Magen and LMA-INA for offering access to their instruments and expertise., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queralto, A.
  • de la Mata, M.
  • Martinez, L.
  • Magen, C.
  • Gibert, M.
  • Arbiol, J.
  • Huhne, R.
  • Obradors, X.
  • Puig, T.
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a highthroughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures'' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce0.9Gd0.1O2-y (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO3 (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001) CGO[ 0-11]parallel to(011) LAO[100] growth orientation, with the enlargement occurring along the [0-11] CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min(-1)) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Strain-driven broken twin boundary coherence in YBa2Cu3O7−δ nanocomposite thin films

  • Guzman, R.
  • Gazquez, J.
  • Rouco, V.
  • Palau, A.
  • Magén, C.
  • Varela, M.
  • Arbiol, J.
  • Obradors, X.
  • Puig, T.
In this letter we use high resolution scanning transmission electron microscopy to study epitaxial YBa2Cu3O7-d (YBCO) nanocomposite thin films. We find that twin boundaries (TB) in YBCO nanocomposite thin films are disturbed by the presence of secondary phase nanoparticles as well as by intergrowths. Secondary phases promote the nucleation of TBs and, at the same time, result in bending, decreasing and changing the TB's spacing. On the other hand, the local strain ensuing from the partial dislocation associated to Y248 and Y125 intergrowths break the vertical coherence of TBs. This interaction results in a complex domain structure where twin boundary coherence is no longer satisfied and twin spacing is reduced down to a few nanometers precluding vortex channeling at low temperatures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the Nucleation and Coarsening Mechanisms of Solution-Derived Self-Assembled Epitaxial Ce0.9Gd0.1O2-y Nanostructures

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Self-Assembling approaches based on chemical solution deposition (CSD) are ideal methods for the cost-effective production of epitaxial nanostructures with high throughput. Therefore, an in-depth investigation of the nucleation and coarsening processes involved in the self-Assembly of nanostructures is mandatory to achieve a good control over nanostructure shape, dimensions, and orientation. Heteroepitaxial CeGdO (CGO) is an ideal model system to unveil the underlying nanostructure development mechanisms in addition to their promising properties for catalysis, gas sensors, and ionic conductivity. Rapid thermal annealing furnaces have been used to study separately the thermodynamic and kinetic nucleation and coarsening mechanisms of self-Assembled CGO isotropic and anisotropic nanostructures based on strain-engineering and surface energies control. Different CGO nanoislands are obtained: isotropic (001)CGO nanodots are grown on (001)-oriented YO:ZrO(YSZ) and LaAlO (Lao) substrates, whereas (011)Lao substrates promote the growth of elongated (011)CGO nanowires. HRTEM and RHEED analyses are used to study the early stages of nucleation, as well as the shape and interfacial structure of CGO nanostructures. A systematic study with the heating ramp, annealing temperature and time, and strain in combination with thermally activated theoretical models provides information on the nucleation behavior, nucleation barriers, and atomic diffusion coefficients along in-plane and out-of-plane island orientations. Highly anisotropic atomic diffusion constants have been shown to be at the origin of the high aspect ratios of some of the nanostructures. Overall, our study provides a general method for the evaluation of nucleation and coarsening of multiple CSD-derived oxide nanostructures and understanding the shape development by combining thermodynamic and kinetic approaches.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrafast Epitaxial Growth Kinetics in Functional Oxide Thin Films Grown by Pulsed Laser Annealing of Chemical Solutions

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultraviolet pulsed laser crystallization of Ba0.8Sr0.2TiO3 films on LaNiO3-coated silicon substrates

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Trolier-McKinstry, Susan
In this work, BaSrTiO (BST) films on LaNiO-buffered SiO/Si (LNO/SiO/Si) substrates were crystallized by pulsed laser irradiation. Solution-derived amorphous barium-strontium-titanate precursor layers were crystallized with a KrF excimer laser in oxygen ambient at fluences ranging from 50 to 75 mJ cm. With the substrate temperature set to 500 °C, the number of pulses and film thickness were varied until high-quality crystallinity could be achieved. It was found that films with a thickness of 40 nm are fully crystallized with a uniaxial {00l} orientation which is predetermined by the LaNiO orientation. On the other hand, for 160 nm thick films, crystallization was observed after 12,000 pulses in the 70 nm close to the surface, while the rest of the film remained amorphous. The large temperature difference between the film surface and interface due to the low thermal conductivity of the amorphous BST is suggested as the origin of this behavior. Films thicker than 80 nm cracked on crystallization due to the stress caused by the different thermal expansion coefficients of film and substrate, as well as the large temperature variations within the BST film.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Disentangling Epitaxial Growth Mechanisms of Solution Derived Functional Oxide Thin Films

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
This study investigates the mechanisms of epitaxial development and functional properties of oxide thin films (CeZrO , LaNiO, and BaSrTiO) grown on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) by the chemical solution deposition approach. Rapid thermal annealing furnaces are very powerful tools in this study providing valuable information of the early stages of nucleation, the kinetics of epitaxial film growth, and the coarsening of nanocrystalline phases. Advanced transmission electron microscopies, X-ray diffraction, and atomic force microscopy are employed to investigate the film microstructure and morphology, microstrain relaxation, and epitaxial crystallization. This study demonstrates that the isothermal evolution toward epitaxial film growth follows a self-limited process driven by atomic diffusion, and surface and interface energy minimization. All investigated oxides experience a transformation from the polycrystalline to the epitaxial phase. This study unequivocally evidences that the film thickness highly influences the epitaxial crystallization rate due to the competition between heterogeneous and homogeneous nucleation barriers and the fast coarsening of polycrystalline grains as compared to epitaxial growth. The investigated films possess good functional properties, and this study successfully confirms an improvement at long annealing times that can be correlated with grain boundary healing processes. Thick epitaxial films can be crystallized by growing sequential individual epitaxial layers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-, XGdxO2- y nanowires derived from chemical solutions

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Martínez Orellana, Lidia|||0000-0002-9370-2962
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Gibert, Marta|||0000-0001-8856-6831
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce₀.₉Gd₀.₁O₂ᵧ (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO₃ (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min⁻¹) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.